R3-DC16B [MSYSTEM]
Remote I/O R3 Series DISCRETE OUTPUT MODULE;型号: | R3-DC16B |
厂家: | M-SYSTEM |
描述: | Remote I/O R3 Series DISCRETE OUTPUT MODULE 输出元件 |
文件: | 总4页 (文件大小:117K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R3-DC16B
Remote I/O R3 Series
CAUTION
The output triac may burn out if the load is shortcircuited
during operation. Install a fuse at each output terminal.
DISCRETE OUTPUT MODULE
(triac output, 16 points)
GENERAL SPECIFICATIONS
Connection
27.5 (1.08)
Internal bus: Via the Installation Base (model: R3-BSx)
Output: M3 separable screw terminal (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R3-BSx)
Screw terminal: Nickel-plated steel
130
(5.12)
Isolation: Output to internal bus or internal power
Output hold function: Setting for communication error with
side DIP SW
109
(4.29)
mm (inch)
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Green LED; turns on in normal operating
conditions.
MODEL: R3–DC16B[1][2]
ORDERING INFORMATION
• Code number: R3-DC16B[1][2]
Specify a code from below for each [1] and [2].
(e.g. R3-DC16BW/Q)
Output status indicator: Red LED; turns on with the outputs
ON.
OUTPUT SPECIFICATIONS
Output: Triac, 16 points
• Specify the specification for option code /Q
(e.g. /C01)
Isolation: Optical isolator
Common: All 16 points (4 terminals)
Common current: Max. 3.2 A per common
Rated load voltage: 100 – 240 V AC
Operational load voltage: 85 – 264 V AC
Maximum load current: 0.4 A per point
Maximum rush current: 6 A for 1 cycle or less time
Maximum leak current at OFF: ≤ 1.5 mA
(200 V AC , 60 Hz)
NO. OF CHANNELS
16: 16
OUTPUT
B: Triac
[1] COMMUNICATION MODE
S: Single
Maximum voltage drop at ON: ≤ 1.6 V RMS
Other features: Zero-cross function, CR absorber, no fuse
provided
W: Dual
[2] OPTIONS
Other Options
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 200 g (0.44 lb)
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
R3-DC16B SPECIFICATIONS
ES-8379 Rev.5 Page 1/4
http://www.m-system.co.jp/
MODEL: R3-DC16B
PERFORMANCE
Data allocation: 1
Current consumption: Approx. 140 mA
Response time: ≤ 2 msec. + 1/2 cycle of excitation load
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(output to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
FUNCTIONS
■OUTPUT HOLD or OUTPUT OFF
In normal conditions, the module outputs the signal from
the preferred bus A.
When an error is detected, the output is switched to the
data from the bus B.
•Output Hold
If both are in error, the module holds the signal and stands
by until one of the communications recovers.
•Output OFF
If both are in error, the module outputs OFF signals and
stands by until one of the communications recovers.
At the startup, it outputs OFF until the communication is
established and normal data is received.
EXTERNAL VIEW
FRONT VIEW
SIDE VIEW
RUN LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Output Status Indicator LEDs
ERR LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
SW3
4
3
2
Output
Hold
1
ON
R3-DC16B SPECIFICATIONS
ES-8379 Rev.5 Page 2/4
http://www.m-system.co.jp/
MODEL: R3-DC16B
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
27.5 (1.08)
109 (4.29)
POSITIONING
GUIDE
1
11
2
20–M3
SCREW
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
20
TERMINAL
COVER
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS
RUN LED ERR LED INDICATOR LED
Output Circuit
1
INTERNAL BUS A
Communication
Circuit
Control
Circuit
1
2
Do 1
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
L
*INTERNAL BUS B
2
Do 2
3
DIP SW
3
Do 3
4
4
INTERNAL POWER
Do 4
5
5
Do 5
6
6
Do 6
7
7
Do 7
8
8
Do 8
9
11
12
13
14
15
16
17
18
9
Do 9
10
11
12
13
14
15
16
Do 10
Do 11
Do 12
Do 13
Do 14
Do 15
Do 16
COM
COM
COM
COM
10
19
20
Numbers in italic indicate LED No.s assigned to the front panel LEDs.
*For dual redundant communication.
R3-DC16B SPECIFICATIONS
ES-8379 Rev.5 Page 3/4
http://www.m-system.co.jp/
MODEL: R3-DC16B
Specifications are subject to change without notice.
R3-DC16B SPECIFICATIONS
ES-8379 Rev.5 Page 4/4
http://www.m-system.co.jp/
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明