R3-DC32AW [MSYSTEM]
Remote I/O R3 Series;型号: | R3-DC32AW |
厂家: | M-SYSTEM |
描述: | Remote I/O R3 Series |
文件: | 总5页 (文件大小:126K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R3-DC32A
Remote I/O R3 Series
RELATED PRODUCTS
• Connector terminal block (model: CNT)
• Special cable with 40-pin connector (model: FCN)
DISCRETE OUTPUT MODULE
(Do 32 points; open collector)
GENERAL SPECIFICATIONS
Connection
27.5 [1.08]
Internal bus: Via the Installation Base (model: R3-BSx)
Output: 40-pin connector (Fujitsu FCN-365P040-AU)
Internal power: Via the Installation Base (model: R3-BSx)
Isolation: Do11 thru Do18 to Do21 thru Do28 to Do31 thru
Do38 to Do41 thru Do48 to internal bus or internal power
Output hold setting: Setting for communication error with
side DIP SW
130
[5.12]
109
[4.29]
mm [inch]
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Green LED turns on in normal operating
conditions.
MODEL: R3–DC32A[1][2]
ORDERING INFORMATION
• Code number: R3-DC32A[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R3-DC32AW/CE/Q)
Output status indicator: Red LED; turns on with the output
ON.
Group selector: Switches the output status indicator
A. 1 - 8: Do11 - Do18
• Specify the specification for option code /Q
(e.g. /C01)
9 - 16: Do21 - Do28
B. 1 - 8: Do31 - Do38
9 - 16: Do41 - Do48
NO. OF CHANNELS
32: 32
OUTPUT SPECIFICATIONS
Output: Open collector, 32 points
OUTPUT
A: Open collector
Isolation: Optical isolator
Common: All 4 points (8 terminals)
Common current: Max. 1 A per common
External excitation: 24 V DC ±10 %, approx. 0.04 A
Rated load voltage: 24 V DC ±10 %
Maximum load current: 0.1 A per point
Maximum rush current: 0.5 A for max. 10 msec.
Maximum leak current at OFF: 0.1 mA
Maximum voltage drop at ON: 0.1 V DC typical; 1.2 V DC
max.
[1] COMMUNICATION MODE
S: Single
W: Dual
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: Without CE
(When driving an inductive load, connect a diode in parallel
with the load.)
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 150 g (0.33 lb)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
R3-DC32A SPECIFICATIONS
ES-8374 Rev.12 Page 1/5
https://www.m-system.co.jp/
MODEL: R3-DC32A
PERFORMANCE
Data allocation: 4
Current consumption: 150 mA
Response time: ≤ 2 msec.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute
(Do11 thru Do18 to Do21 thru Do28 to Do31 thru Do38 to
Do41 thru Do48)
2000 V AC @ 1 minute (output to internal bus or internal
power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
FUNCTIONS
■OUTPUT HOLD or OUTPUT OFF
In normal conditions, the module outputs the signal from
the preferred bus A.
When an error is detected, the output is switched to the
data from the bus B.
• Output Hold
If both are in error, the module holds the signal and stands
by until one of the communications recovers.
• Output OFF
If both are in error, the module outputs OFF signals and
stands by until one of the communications recovers.
At the startup, it outputs OFF until the communication is
established and normal data is received.
EXTERNAL VIEW
■ FRONT VIEW
■ SIDE VIEW
RUN LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
Output Status Indicator LEDs
Group Selector
ERR LED
B
A
• Connector Pin
Assignment
Output Connector
SW3
A
1
B
1
4
3
2
1
Output
Hold
ON
A B
20 20
R3-DC32A SPECIFICATIONS
ES-8374 Rev.12 Page 2/5
https://www.m-system.co.jp/
MODEL: R3-DC32A
EXTERNAL DIMENSIONS unit: mm [inch]
27.5 [1.08]
109 [4.29]
POSITIONING
GUIDE
R3-DC32A SPECIFICATIONS
ES-8374 Rev.12 Page 3/5
https://www.m-system.co.jp/
MODEL: R3-DC32A
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
DIP SW
STATUS
RUN LED ERR LED INDICATOR LED
Output Circuit
1A
2A
3A
4A
5A
6A
7A
8A
INTERNAL BUS A
1A
2A
Do 11
Do 12
Do 13
Do 14
Do 15
Do 16
Do 17
Do 18
COM1
L
L
L
L
L
L
L
L
Communication
Circuit
* INTERNAL BUS B
GROUP
SELECTOR
3A
4A
INTERNAL POWER
5A
6A
7A
8A
9A
24V DC
24V DC1
Do 21
Do 22
Do 23
Do 24
Do 25
Do 26
Do 27
Do 28
COM2
10A
11A
12A
13A
14A
15A
16A
17A
18A
19A
20A
1B
Output Circuit
Output Circuit
Output Circuit
9A
L
L
L
L
L
L
L
L
10A
11A
12A
13A
14A
15A
16A
Control
Circuit
24V DC
24V DC2
1B
2B
3B
4B
5B
6B
7B
8B
Do 31
Do 32
Do 33
Do 34
Do 35
Do 36
Do 37
Do 38
COM3
L
L
L
L
L
L
L
L
2B
3B
4B
5B
6B
7B
8B
9B
24V DC
10B
11B
12B
13B
14B
15B
16B
17B
18B
19B
20B
24V DC3
Do 41
Do 42
Do 43
Do 44
Do 45
Do 46
Do 47
Do 48
COM4
9B
L
L
L
L
L
L
L
L
10B
11B
12B
13B
14B
15B
16B
24V DC
24V DC4
Numbers in italic indicate LED No.s assigned to the front panel LEDs.
Two groups selected A or B with the front switch.
* For dual redundant communication.
R3-DC32A SPECIFICATIONS
ES-8374 Rev.12 Page 4/5
https://www.m-system.co.jp/
MODEL: R3-DC32A
OUTPUT CONNECTOR (40-pin)
ASSIGN-
ASSIGN-
MENT
PIN NO.
PIN NO.
MENT
Do 11
1A
2A
1B
2B
Do 31
Do 32
Do 33
Do 34
Do 35
Do 36
Do 37
Do 38
COM3
24V DC3
Do 41
Do 42
Do 43
Do 44
Do 45
Do 46
Do 47
Do 48
COM4
24V DC4
Do 12
Do 13
Do 14
Do 15
Do 16
Do 17
Do 18
COM1
24V DC1
Do 21
Do 22
Do 23
Do 24
Do 25
Do 26
Do 27
Do 28
COM2
24V DC2
3A
3B
4A
4B
5A
5B
6A
6B
7A
7B
8A
8B
9A
9B
10A
11A
12A
13A
14A
15A
16A
17A
18A
19A
20A
10B
11B
12B
13B
14B
15B
16B
17B
18B
19B
20B
Specifications are subject to change without notice.
R3-DC32A SPECIFICATIONS
ES-8374 Rev.12 Page 5/5
https://www.m-system.co.jp/
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明