R3-PC16AW [MSYSTEM]

Remote I/O R3 Series PULSE OUTPUT MODULE;


型号：	R3-PC16AW
厂家：	M-SYSTEM
描述：	Remote I/O R3 Series PULSE OUTPUT MODULE 输出元件
文件：	总4页 (文件大小：118K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R3-PC16A

Remote I/O R3 Series

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R3-BSx)

Output: M3 separable screw terminal (torque 0.5 N·m)

Internal power: Via the Installation Base (model: R3-BSx)

Screw terminal: Nickel-plated steel

PULSE OUTPUT MODULE

(open collector output, 16 points)

27.5 [1.08]

Isolation: Output to internal bus or internal power

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ERR indicator: Bi-color (red/green) LED;

Red with external power supply abnormality;

Green in normal operating conditions.

Output status indicator: Red LED; turns on with the output

ON.

130

[5.12]

109

[4.29]

mm [inch]

Pulse width adjustment: Side DIP SW

MODEL: R3-PC16A[1][2]

OUTPUT SPECIFICATIONS

Output: Open collector, 16 points

ORDERING INFORMATION

• Code number: R3-PC16A[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R3-PC16AW/CE/Q)

Max. frequency: 100 Hz (selectable with DIP SW)

Max. ouptut pulse number per setting: 2000

(No output when a number greater than 2000 is set.)

Totalized pulse range: 1 – 10000 (‘0’ at reset only)

Max. pulse range selectable from 1 to 65535 using the

R3CON PC Configurator Software. Refer to the R3CON Users

Manual for detailed information.

• Specify the specification for option code /Q

(e.g. /C01)

NO. OF CHANNELS

Count at overflow: Reset and restart at ‘1.’

Rated load voltage: 24 V DC ±10 %

16: 16

Maximum load current: 0.1 A per point

OUTPUT

A: Open collector

Maximum rush current: 0.5 A for max. 10 msec.

Maximum leak current at OFF: 0.1 mA

Maximum voltage drop at ON: 0.1 V DC typical; 1.2 V DC

max.

[1] COMMUNICATION MODE

S: Single

Common: All 16 points (2 terminals)

W: Dual

Common current: Max. 1.6 A per common

External power supply: 24 V DC ±10 % approx. 0.02 A

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 200 g (0.44 lb)

/CE: CE marking

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

PERFORMANCE

Data allocation: 16

Current consumption: Approx. 100 mA

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(output to internal bus or internal power)

/C02: Polyurethane coating

/C03: Rubber coating

R3-PC16A SPECIFICATIONS

ES-8408 Rev.10 Page 1/4

https://www.m-system.co.jp/

MODEL: R3-PC16A

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

FUNCTIONS

■ MANUAL COUNT RESET

1) Remove Network Module or its cables and interrupt

communication with other devices.

2) Turn ON the Count Reset SW (SW3-1).

3) Return the module to the base and turn the power supply

on.

4) ERR LED turns on and the module starts resetting its

counter. When the resetting is complete, the LED turns to

green. DO NOT remove the power while the red LED is on.

The RUN LED starts blinking at the same time.

5) After the green LED is confirmed, turn the power supply

off.

6) Turn OFF the Count Reset SW (SW3-1).

7) Return the Network module onto the base and turn the

power supply on.

Note: Count Reset SW must be turned OFF after this

procedure because the module does not start counting with

ON state.

EXTERNAL VIEW

■ FRONT VIEW

■ SIDE VIEW

RUN LED

Status Indicator LED

ERR LED

SW3

SW2

SW1

OFF

Width

Count

Reset

Width

Count Reset SW must be turned off during operation.

R3-PC16A SPECIFICATIONS

ES-8408 Rev.10 Page 2/4

https://www.m-system.co.jp/

MODEL: R3-PC16A

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

27.5 [1.08]

109 [4.29]

POSITIONING

GUIDE

20–M3

SCREW

TERMINAL

COVER

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

STATUS

RUN LED ERR LED INDICATOR LED

Output Circuit

INTERNAL BUS A

Communication

Circuit

Control

Circuit

Po 1

*INTERNAL BUS B

Po 2

DIP SW

Po 3

INTERNAL POWER

Po 4

Po 5

Po 6

Po 7

Po 8

Po 9

+24V

Po 10

Po 11

Po 12

Po 13

Po 14

Po 15

Po 16

24VDC

COM

24VDC

Numbers in italic indicate LED No.s assigned to the front panel LEDs.

*For dual redundant communication.

R3-PC16A SPECIFICATIONS

ES-8408 Rev.10 Page 3/4

https://www.m-system.co.jp/

MODEL: R3-PC16A

Specifications are subject to change without notice.

R3-PC16A SPECIFICATIONS

ES-8408 Rev.10 Page 4/4

https://www.m-system.co.jp/

相关型号：