R3-PS3P [MSYSTEM]

Remote I/O R3 Series POWER SUPPLY MODULE;


型号：	R3-PS3P
厂家：	M-SYSTEM
描述：	Remote I/O R3 Series POWER SUPPLY MODULE
文件：	总4页 (文件大小：115K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R3-PS3

Remote I/O R3 Series

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

POWER SUPPLY MODULE

(double slot, continuous output current 2.0 A)

/CE: CE marking

Housing (refer to the external dimensions)

blank: Standard type

STANDARD TYPE

OPTION /B

55 [2.17]

/B: Type B

Other Options

blank: none

/Q: Option other than the above (specify the specification)

130

[5.12]

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

109

[4.29]

109

[4.29]

mm [inch]

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

Internal power output: Via the Installation Base (model: R3-

BSx)

MODEL: R3-PS3-[1][2]

Power input, RUN contact output: M3 separable screw

terminal (torque 0.5 N·m)

ORDERING INFORMATION

• Code number: R3-PS3-[1][2]

Screw terminal: Nickel-plated steel

Isolation: Internal power to power input to RUN contact

output to FG

Specify a code from below for each of [1] and [2].

(e.g. R3-PS3-K3/CE/B/Q)

• Specify the specification for option code /Q

(e.g. /C01)

Power indicator LED: Green LED turns on when the power is

supplied.

■ RUN CONTACT OUTPUT

RUN contact: Turns on (closed) while the power is supplied.

Rated load: 250 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 0.5 A (resistive load)

[1] POWER INPUT

AC Power

K: 85 – 132 V AC

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA or 150 W

Minimum load: 1 V DC @ 1 mA

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

(CE not available)

K3: 100 – 120V AC

Mechanical life: 2 × 10 cycles (rate 300 cycles/min.) When

(Operational voltage range 85 – 132 V, 47 – 66 Hz)

(Only /CE available)

driving an inductive load, external contact protection and

noise quenching recommended.

L: 170 – 264 V AC

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

(CE Not available)

INSTALLATION

Power consumption (Output current: 2.0 A @ 20 V DC)

L3: 200 – 240 V AC

(Operational voltage range 170 – 264 V, 47 – 66 Hz)

(Only /CE available)

•AC: Approx. 100 VA

•DC: Approx. 50 W or 2.0 A at 24 V

DC Power

Output current: 2.0 A continuous at 20 V DC;

2.2 A for 10 minutes

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

P: 110 V DC

(For dual power supply, the specification of output current is

same. Total current continuously consumed at the network

modules, I/O modules and interface I/O modules must be

within 2.0 A.)

(Operational voltage range 85 – 150 V, ripple 10 %p-p max.)

(CE not available)

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

R3-PS3 SPECIFICATIONS

ES-8358 Rev.12 Page 1/4

https://www.m-system.co.jp/

MODEL: R3-PS3

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 450 g (0.99 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(internal power to power input to RUN contact output to FG)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1, EN 61010-2-201

Measurement Category II (RUN contact output)

Installation Category II (power input)

Pollution Degree 2

Internal power to power input: Reinforced insulation

(300 V)

Internal power to RUN contact output: Basic insulation

(300 V)

RoHS Directive

EXTERNAL VIEW

Power LED

R3-PS3 SPECIFICATIONS

ES-8358 Rev.12 Page 2/4

https://www.m-system.co.jp/

MODEL: R3-PS3

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

■ STANDARD TYPE

109 [4.29]

■ OPTION /B

19 [.75]

90 [3.54]

55 [2.17]

POSITIONING

GUIDE

6–M3

SCREW

TERMINAL

COVER

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

POWER LED

Isolation

U (+)

V (–)

*FG

Control

Circuit

INTERNAL POWER

POWER INPUT

RUN +

RUN CONTACT OUTPUT

RUN –

*In order to improve EMC performance, bond the FG terminal to the ground.

Caution: This terminal is NOT a protective conductor terminal.

R3-PS3 SPECIFICATIONS

ES-8358 Rev.12 Page 3/4

https://www.m-system.co.jp/

MODEL: R3-PS3

Specifications are subject to change without notice.

R3-PS3 SPECIFICATIONS

ES-8358 Rev.12 Page 4/4

https://www.m-system.co.jp/

相关型号：