R3-RR8S [MSYSTEM]
Remote I/O R3 Series REMOTE CONTROL RELAY CONTROL MODULE;
| 型号： | R3-RR8S |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R3 Series REMOTE CONTROL RELAY CONTROL MODULE 远程控制 |
| 文件： | 总7页 (文件大小：159K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R3-RR8
Remote I/O R3 Series
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
REMOTE CONTROL RELAY CONTROL MODULE
(Do 8 points)
/C02: Polyurethane coating
/C03: Rubber coating
Functions & Features
• Controls remote control relays for lighting control with
Fieldbus
RELATED PRODUCTS
• Applicable to the remote control relays already installed
• Monitors status of remote control relays with feedback
inputs from signal lines
• Interface Module (model: R3-NC1, NC3, NE1, NM1, NM3,
NM4, NDx, NF2, NFL1)
Firmware version V2.00 or higher.
R3-NF2 is available with firmware version V0.04 or higher.,
Typical Applications
• Monitors and controls of lighting in buildings
RECOMMENDED PRODUCTS (OPERATION CHECKED)
Remote control relay:
BR-12D, BR-22D (Mitsubishi Electric)
WR6165 (Panasonic)
27.5 [1.08]
Remote control transformer:
BRT-10B, BRT-20B (Mitsubishi Electric)
WR2301 (Panasonic)
130
[5.12]
GENERAL SPECIFICATIONS
Connection
109
[4.29]
mm [inch]
Internal bus: Via the Installation Base (model: R3-BSx)
Output: M3 separable screw terminal (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R3-BSx)
Screw terminal: Nickel-plated steel
MODEL: R3-RR8[1][2]
Isolation: Output to internal bus or internal power
Input Data Length: 8 bit, 16 bit selectable with DIP switch
Output data length: 8 bit, 16 bit selectable with DIP switch
RUN indicator: Bi-color (red/green) LED;
ORDERING INFORMATION
• Code number: R3-RR8[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R3-RR8W/CE/Q)
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Green LED;
• Specify the specification for option code /Q
(e.g. /C01)
OFF in abnormality; ON in normal operating conditions.
Input output status indicator: Red LED;
NO. OF CHANNELS
8: 8
1 to 8: Output bit status, turns on with bit set ON.
9 to 16: Feedback input status, turns on with the input ON.
[1] COMMUNICATION MODE
S: Single
OUTPUT SPECIFICATIONS
Number of output: 8 points
W: Dual
Common: All 8 points (12 terminal)
Rated load voltage: 24 V AC ±10 % (supplied by the remote
control transformer)
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: Without CE
Load voltage frequency: 50 / 60 Hz
Maximum outputs provided at once: No limit
Output ON duration: 100 msec.
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
R3-RR8 SPECIFICATIONS
ES-8432 Rev.10 Page 1/7
https://www.m-system.co.jp/
MODEL: R3-RR8
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 200 g (0.44 lb)
PERFORMANCE
Data allocation: 1
Current consumption: 40 mA
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(output to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
■
FRONT VIEW
■ SIDE VIEW
RUN LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
ERR LED
Status Indicator
LED
1
2
3
4
5
6
7
8
9
10
111
Functions
112
13
14
15
16
17
18
19
20
SW3
Output Data Bit
Input Data Bit
4
3
2
1
ON
R3-RR8 SPECIFICATIONS
ES-8432 Rev.10 Page 2/7
https://www.m-system.co.jp/
MODEL: R3-RR8
INPUT OUTPUT DATA BIT & DATA ALLOCATION
■ OUTPUT DATA BIT: 16 BITS (SW3-4: OFF)
When output data bit is 16 bits, set each output with 2
bits.
■ OUTPUT DATA BIT: 8 BITS (SW3-4: ON)
When output data bit is 8 bits, set each output with 1 bit.
The table below shows data allocation.
The table below shows data allocation.
BIT
SETTING
0
OPERATION
Output 1 OFF
BIT
SETTING
0, 0
OPERATION
0
No operation
Output 1 ON
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
-
Output 1 ON
Output 2 OFF
Output 2 ON
Output 3 OFF
Output 3 ON
Output 4 OFF
Output 4 ON
Output 5 OFF
Output 5 ON
Output 6 OFF
Output 6 ON
Output 7 OFF
Output 7 ON
Output 8 OFF
Output 8 ON
Unused
1, 0
0, 1
1, 1
0, 0
1, 0
0, 1
1, 1
0, 0
1, 0
0, 1
1, 1
0, 0
1, 0
0, 1
1, 1
0, 0
1, 0
0, 1
1, 1
0, 0
1, 0
0, 1
1, 1
0, 0
1, 0
0, 1
1, 1
0, 0
1, 0
0, 1
1, 1
0, 1
1
2
3
4
5
6
7
Output 1 OFF
Output 1 RESET
No operation
Output 2 ON
2, 3
Output 2 OFF
Output 2 RESET
No operation
Output 3 ON
4, 5
Output 3 OFF
Output 3 RESET
No operation
Output 4 ON
6, 7
Output 4 OFF
Output 4 RESET
No operation
Output 5 ON
8
-
Unused
9
-
Unused
10
11
12
13
14
15
8, 9
Output 5 OFF
Output 5 RESET
No operation
Output 6 ON
-
Unused
-
Unused
-
Unused
-
Unused
10, 11
12, 13
14, 15
Output 6 OFF
Output 6 RESET
No operation
Output 7 ON
-
Unused
ON (or OFF) cannot be set consecutively, because when each
bit is “1”, ON is set and when each bit is “0”, OFF is set.
Output 7 OFF
Output 7 RESET
No operation
Output 8 ON
Output 8 OFF
Output 8 RESET
By set t ing wi th 2 bi ts, the module operates as shown above.
ON or OFF can be set consecutively. To output ON twice
successively, set ON (1, 0), RESET (1, 1), and then set ON
(1, 0) again.
R3-RR8 SPECIFICATIONS
ES-8432 Rev.10 Page 3/7
https://www.m-system.co.jp/
MODEL: R3-RR8
■ INPUT DATA BIT: 16 BITS (SW3-3: ON)
When output data bit is 16 bits, display the status of feedback
input for each output with 2 bits.
■ INPUT DATA BIT: 8 BITS (SW3-3: OFF)
When output data bit is 8 bits, display the status of feedback
input for each output with 1 bit.
The table below shows data allocation.
The table below shows data allocation.
BIT
DISPLAY
0
OPERATION
BIT
DISPLAY
0
OPERATION
Feedback input for output 1 OFF
Feedback input for output 1 OFF
0
0
1
-
Feedback input for output 1 ON
Reserved
1
0
1
0
1
0
1
0
1
0
1
0
1
0
1
-
Feedback input for output 1 ON
Feedback input for output 2 OFF
Feedback input for output 2 ON
Feedback input for output 3 OFF
Feedback input for output 3 ON
Feedback input for output 4 OFF
Feedback input for output 4 ON
Feedback input for output 5 OFF
Feedback input for output 5 ON
Feedback input for output 6 OFF
Feedback input for output 6 ON
Feedback input for output 7 OFF
Feedback input for output 7 ON
Feedback input for output 8 OFF
Feedback input for output 8 ON
Unused
1
1
2
3
4
5
6
7
0
1
-
Feedback input for output 2 OFF
Feedback input for output 2 ON
Reserved
2
3
0
1
-
Feedback input for output 3 OFF
Feedback input for output 3 ON
Reserved
4
5
0
1
-
Feedback input for output 4 OFF
Feedback input for output 4 ON
Reserved
6
7
0
1
-
Feedback input for output 5 OFF
Feedback input for output 5 ON
Reserved
8
9
0
1
-
Feedback input for output 6 OFF
Feedback input for output 6 ON
Reserved
10
11
12
13
14
15
8
-
Unused
9
0
1
-
Feedback input for output 7 OFF
Feedback input for output 7 ON
Reserved
-
Unused
10
11
12
13
14
15
-
Unused
-
Unused
0
1
-
Feedback input for output 8 OFF
Feedback input for output 8 ON
Reserved
-
Unused
-
Unused
-
Unused
R3-RR8 SPECIFICATIONS
ES-8432 Rev.10 Page 4/7
https://www.m-system.co.jp/
MODEL: R3-RR8
DATA ASSIGNMENT
• I/O data length is 8 bit. (Bit access)
15
7
0
Input 1 (Output 1)
Input 2 (Output 2)
•
•
•
Input 8 (Output 8)
• I/O data length is 8 bit. (Word access)
+0
Input 1 (Output 1)
Input 2 (Output 2)
•
•
•
Input 8 (Output 8)
Each bit in the 1 word corresponds I/O.
• I/O data length is 16 bit. (Bit access)
15 14
3 2 1 0
Input 1 (Output 1)
Input 2 (Output 2)
•
•
•
Input 8 (Output 8)
2 bits corresponds one I/O.
• I/O data length is 16 bit. (Word access)
15 14
+0
3 2 1 0
Input 1 (Output 1)
Input 2 (Output 2)
•
•
•
Input 8 (Output 8)
Each bit in the 1 word corresponds I/O.
2 bits corresponds one I/O.
R3-RR8 SPECIFICATIONS
ES-8432 Rev.10 Page 5/7
https://www.m-system.co.jp/
MODEL: R3-RR8
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
27.5 [1.08]
109 [4.29]
POSITIONING
GUIDE
1
11
2
20–M3
SCREW
12
3
13
4
14
5
15
6
16
7
17
8
18
9
19
10
20
TERMINAL
COVER
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS
RUN LED ERR LED INDICATOR LED
Output Circuit
1
2
3
4
5
6
7
8
INTERNAL BUS A
Communication
Control
OUTPUT 1
OUTPUT 2
OUTPUT 3
OUTPUT 4
OUTPUT 5
OUTPUT 6
OUTPUT 7
OUTPUT 8
COM
red
1
2
Remote Control
Relay
blue
Circuit
Circuit
*INTERNAL BUS B
red
Remote Control
DIP SW
3
Relay
blue
INTERNAL POWER
4
red
Remote Control
Relay
5
blue
red
6
Remote Control
Relay
blue
7
red
Remote Control
Relay
8
blue
11
12
13
14
15
16
17
18
9
red
Remote Control
Relay
blue
COM
COM
red
Remote Control
Relay
blue
COM
red
Remote Control
Relay
COM
blue
COM
COM
blue
Remote Control
Transformer
COM
white
COM
blue
Remote Control
Transformer
19
10
20
COM
white
COM
COM
Numbers in italic indicate LED No.s assigned to the front panel LEDs.
* For dual redundant communication.
R3-RR8 SPECIFICATIONS
ES-8432 Rev.10 Page 6/7
https://www.m-system.co.jp/
MODEL: R3-RR8
Specifications are subject to change without notice.
R3-RR8 SPECIFICATIONS
ES-8432 Rev.10 Page 7/7
https://www.m-system.co.jp/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明