R30PA2S/Q [MSYSTEM]
Remote I/O R30 Series TOTALIZED PULSE INPUT MODULE;
| 型号： | R30PA2S/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R30 Series TOTALIZED PULSE INPUT MODULE 输入元件 |
| 文件： | 总5页 (文件大小：235K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R30PA2
Remote I/O R30 Series
RELATED PRODUCTS
• Interface module
Model: R30NECT1 (firmware version V1.04.10 or higher)
Model: R30NCIE1 (firmware version V1.01.13 or higher)
• Paperless recorder
TOTALIZED PULSE INPUT MODULE
(Pi 2 points, 32 Bits)
Functions & Features
Model: TR30 (firmware version V1.05 or higher)
• PC configurator software (model: R30CFG)
Downloadable at M-System’s web site.
For connecting to PC, use commercially available Mini-B
type USB cable. (provided by user)
• Space-saving remote I/O module of 2 points input pulse
counter
• 32-bit binary data
25 [.98]
GENERAL SPECIFICATIONS
Connection
110
[4.33]
Internal bus: Via the Installation Base (model: R30BS)
Input: M3 separable screw terminal (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R30BS)
Solderless terminal: Refer to the drawing at the end of the
section.
98
[3.86]
Recommended manufacturer: Japan Solderless Terminal
MFG. Co., Ltd., Nichifu Co., Ltd.
mm [inch]
(Solderless terminals with insulation sleeve do not fit.)
Applicable wire size: 0.25 to 0.75 mm
2
MODEL: R30PA2S[1]
Screw terminal: Nickel-plated steel
Isolation: Input or reset input or external power to internal
bus or internal power
ORDERING INFORMATION
• Code number: R30PA2S[1]
Specify a code from below for [1].
(e.g. R30PA2S/Q)
Status indicator LEDs: RUN, ERR
Input status indicator LEDs: Green LED; turns on with input
ON
(Refer to the instruction manual.)
• Specify the specification for option code /Q
(e.g. /C01/SET)
Count reset: by inputting one pulse to the reset input
terminal, or from host PC/PLC
Count preset: settable from host PC/PLC, or with PC
configurator software
NO. OF CHANNELS
2: 2
■Recommended solderless terminal size - M3 (unit: mm)
3 max.
COMMUNICATION MODE
3.2 dia.
S: Single
[1] OPTIONS
Other Options
12 max.
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
EX-FACTORY SETTING
/SET: Preset according to the Ordering Information Sheet
(No. ESU-9022)
R30PA2 SPECIFICATIONS
ES-9022 Rev.2 Page 1/5
https://www.m-system.co.jp/
MODEL: R30PA2
INPUT SPECIFICATIONS
Module type: Pulse input, 2 points
Common: Positive or negative common (NPN/PNP), common
per 2 points
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
■ Contact Input / Reset Input
•Open collector input (NPN, PNP)
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage/current: ≥ 16 V DC (input to common) /
≥ 3.7 mA
OFF voltage/current: ≤ 5 V DC (input to common) / ≤ 1 mA
•Voltage Pulse Input
ON voltage/current: ≥ 16 V DC (input to common) /
≥ 3.7 mA
OFF voltage/current: ≤ 5 V DC (input to common) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
ON delay: ≤ 2.0 msec.
OFF delay: ≤ 2.0 msec.
Max input frequency: 100 Hz
Minimum pulse width time requirement: 5 msec. (for both
ON and OFF)
Totalized pulse range: 0 to 4,294,967,295 (0 only when the
counter is reset)
Max pulse range: 1 to 4,294,967,295
(factory setting: 4,294,967,295)
Count at overflow: 0 or 1 (factory setting: 0)
INSTALLATION
Current consumption: 30 mA max.
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -20 to +65°C (-4 to +149°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R30BS)
Weight: 150 g (0.33 lb)
PERFORMANCE
Data allocation: 4
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input or reset input or external power to internal bus or
internal power)
1500 V AC @ 1 minute (power to FG; isolated on the power
supply module)
R30PA2 SPECIFICATIONS
ES-9022 Rev.2 Page 2/5
https://www.m-system.co.jp/
MODEL: R30PA2
CONFIGURATOR SOFTWARE SETTING
The following parameters can be set with using PC Configurator Software (model: R30CFG)
Refer to the users manual for the R30CFG for detailed operation of the software program.
■ CHANNEL INDIVIDUAL SETTING
PARAMETER
SETTING RANGE
1 – 4,294,967,295
DEFAULT SETTING
4,294,967,295
Max no. of totalized pulse
Count at overow
(value to which the count returns)
0
1
0
Preset value
0 – Max no. of totalized pulse
SETTING RANGE
0
■ CHANNEL BATCH SETTING
PARAMETER
DEFAULT SETTING
Count pulse edge
Falling edge (DI-ON)/
Rising edge (DI-OFF)
Falling edge (DI-ON)
External reset pulse edge to detect Falling edge (DI-ON)/
Rising edge (DI-OFF)
Falling edge (DI-ON)
External reset detection
Reset/preset from host PC/PLC
Simulate input
Enable/Disable
Disable
Enable/Disable
Disable
Normal input/Simulate input
Normal input
EXTERNAL VIEW
■ FRONT VIEW
■ SIDE VIEW
Positioning Guide
Specifications
RUN LED
1
2
RUN
ERR
Input Status Indicator LED
R
ERR LED
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
Input Terminal
Block
Terminal Fixing
Screw
Terminal Cover
■ BOTTOM VIEW
Base Fixing Screw
Lock Tab
R30PA2 SPECIFICATIONS
ES-9022 Rev.2 Page 3/5
https://www.m-system.co.jp/
MODEL: R30PA2
TERMINAL ASSIGNMENTS
1
No. ID
Function
PI1 Input 1
PI2 Input 2
No. ID
Function
PI1
11
C1
12
C2
13
NC
14
NC
15
NC
16
NC
17
NC
18
NC
1
2
3
4
5
6
7
8
9
11 C1 Common
2
12 C2 Common
PI2
3
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
NC No connection
RST+ Reset input (+)
13 NC No connection
14 NC No connection
15 NC No connection
16 NC No connection
17 NC No connection
18 NC No connection
19 RST– Reset input (–)
NC
4
NC
5
NC
6
NC
7
NC
10 V+ External Excitation (+) 20
V
–
External Excitation (–)
8
NC
9
RST+
19
RST–
10
V+
20
V–
DATA ALLOCATION
ADDRESS
CONTENTS
+0
+1
+2
+3
Input 1 totalized value (lower 16 bits)
Input 1 totalized value (upper 16 bits)
Input 2 totalized value (lower 16 bits)
Input 2 totalized value (upper 16 bits)
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]
25 [.98]
98 [3.86]
20–M3
SCREW
①
⑪
⑫
⑬
⑭
⑮
⑯
⑰
⑱
⑲
⑳
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
R30PA2 SPECIFICATIONS
ES-9022 Rev.2 Page 4/5
https://www.m-system.co.jp/
MODEL: R30PA2
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
EXTERNAL
EXCITATION
Specifications are subject to change without notice.
R30PA2 SPECIFICATIONS
ES-9022 Rev.2 Page 5/5
https://www.m-system.co.jp/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明