R3S-DA16S/Q [MSYSTEM]

Remote I/O R3 Series DISCRETE INPUT MODULE;
R3S-DA16S/Q
型号: R3S-DA16S/Q
厂家: M-SYSTEM    M-SYSTEM
描述:

Remote I/O R3 Series DISCRETE INPUT MODULE

输入元件
文件: 总4页 (文件大小:154K)
中文:  中文翻译
下载:  下载PDF数据表文档文件
MODEL: R3S-DA16  
Isolation: Input to internal bus or internal power  
Remote I/O R3 Series  
Excitation monitor: Selectable with side DIP switch; ON/OFF  
setting available  
DISCRETE INPUT MODULE  
(Di 16 points; with excitation supply, tension clamp terminal  
block)  
RUN indicator: Bi-color (red/green) LED;  
Red when the bus A operates normally;  
Green when the bus B operates normally;  
Amber when both buses operate normally.  
ERR indicator: Bi-color (red/green) LED;  
Red with excitation abnormality;  
27.5 (1.08)  
Green in normal operating conditions.  
Input status indicator: Red LED; turns on with the input ON.  
Read rate: 1 / 5 / 10 / 20 / 50 / 70 / 100 / 200 msec.  
selectable with DIP SW  
130 (5.12)  
120 (4.72)  
mm (inch)  
INPUT SPECIFICATIONS  
Number of input: 16 points  
Isolation: Optical isolator, transformer (internal power  
supply)  
MODEL: R3S-DA16[1][2]  
Input resistance: Approx. 5.9 kΩ  
Common: Negative common per 16 points (20 terminals)  
Sensing: 13 V DC  
ORDERING INFORMATION  
• Code number: R3S-DA16[1][2]  
Specify a code from below for each of [1] and [2].  
(e.g. R3S-DA16W/Q)  
ON current/resistance: ≥ 1.5 mA (≤ 1.5 kΩ)  
OFF current/resistance: ≤ 0.75 mA (≥ 18 kΩ)  
Detection levels  
• Specify the specification for option code /Q  
(e.g. /C01)  
ON: ≥ 10 V  
OFF: ≤ 4 V  
NO. OF CHANNELS  
16: 16  
INSTALLATION  
Operating temperature: -10 to +55°C (14 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Atmosphere: No corrosive gas or heavy dust  
Mounting: Installation Base (model: R3-BSx)  
Weight: 200 g (0.44 lb)  
[1] COMMUNICATION MODE  
S: Single  
W: Dual  
[2] OPTIONS  
blank: none  
PERFORMANCE  
Data allocation: 1  
/Q: Options other than the above (specify the specification)  
Current consumption: 100 mA  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 2000 V AC @ 1 minute  
(input to internal bus or internal power)  
2000 V AC @ 1 minute (power input to FG; isolated on the  
power supply module)  
SPECIFICATIONS OF OPTION: Q  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
/C02: Polyurethane coating  
/C03: Rubber coating  
FUNCTIONS  
EXCITATION MONITOR  
GENERAL SPECIFICATIONS  
Connection  
Enabled/disabled with DIP switch setting.  
Excitation Monitor ON  
Internal bus: Via the Installation Base (model: R3-BSx)  
Input: Separable tension clamp terminal (applicable wire  
The input is held at the last status when the loss of  
excitation is detected.  
size: 0.2 to 1.5 mm , stripped length 10 mm)  
2
Excitation Monitor OFF  
Internal power: Via the Installation Base (model: R3-BSx)  
R3S-DA16 SPECIFICATIONS  
ES-8931 Rev.3 Page 1/4  
http://www.m-system.co.jp/  
MODEL: R3S-DA16  
All input signals are turned off when the loss of excitation is  
detected.  
EXTERNAL VIEW  
FRONT VIEW  
SIDE VIEW  
RUN LED  
1
2
3
4
5
6
7
8
9
10  
11  
12  
13  
14  
15  
16  
Status Indicator LED  
ERR LED  
Functions  
SW3  
21  
1
4
Read  
Rate  
3
2
Exc.  
Monitor  
1
ON  
40  
20  
EXTERNAL DIMENSIONS unit: mm (inch)  
120 (4.72)  
109 (4.29)  
27.5 (1.08)  
POSITIONING  
GUIDE  
21  
1
40  
20  
R3S-DA16 SPECIFICATIONS  
ES-8931 Rev.3 Page 2/4  
http://www.m-system.co.jp/  
MODEL: R3S-DA16  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
RUN LED ERR LED STATUS  
INDICATOR LED  
DIP SW  
Input Circuit  
1
2
1
Di 1  
Di 2  
INTERNAL BUS A  
Comm.  
Circuit  
2
INTERNAL BUS B*  
3
3
Di 3  
4
INTERNAL POWER  
4
Di 4  
5
5
Di 5  
Control  
Circuit  
9
6
6
Di 6  
10  
19  
20  
7
7
Di 7  
8
8
Di 8  
9
11  
12  
13  
14  
15  
16  
17  
18  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
34  
35  
36  
37  
38  
39  
40  
Di 9  
10  
11  
12  
13  
14  
15  
16  
Di 10  
Di 11  
Di 12  
Di 13  
Di 14  
Di 15  
Di 16  
0V  
Numbers in italic indicate LED No.s assigned to the front panel LEDs.  
* For dual redundant communication.  
R3S-DA16 SPECIFICATIONS  
ES-8931 Rev.3 Page 3/4  
http://www.m-system.co.jp/  
MODEL: R3S-DA16  
Input Circuit  
1
1
Di 1  
16  
18  
Control  
Circuit  
Di 16  
+
21  
22  
Excitation supply  
40  
INPUT TERMINAL ASSIGNMENT  
PIN No.  
21  
FUNCTION  
0V  
PIN No.  
1
FUNCTION  
Di1  
22  
0V  
2
Di2  
23  
0V  
3
Di3  
24  
0V  
4
Di4  
25  
0V  
5
Di5  
26  
0V  
6
Di6  
27  
0V  
7
Di7  
28  
0V  
8
Di8  
29  
0V  
9
NC  
30  
0V  
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
NC  
31  
0V  
Di9  
32  
0V  
Di10  
Di11  
Di12  
Di13  
Di14  
Di15  
Di16  
NC  
33  
0V  
34  
0V  
35  
0V  
36  
0V  
37  
0V  
38  
0V  
39  
0V  
40  
0V  
NC  
Specifications are subject to change without notice.  
R3S-DA16 SPECIFICATIONS  
ES-8931 Rev.3 Page 4/4  
http://www.m-system.co.jp/  

相关型号:

SI9130DB

5- and 3.3-V Step-Down Synchronous Converters

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135LG-T1-E3

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9135_11

SMBus Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9136_11

Multi-Output Power-Supply Controller

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130CG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130LG-T1-E3

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9130_11

Pin-Programmable Dual Controller - Portable PCs

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137DB

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9137LG

Multi-Output, Sequence Selectable Power-Supply Controller for Mobile Applications

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY

SI9122E

500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification Drivers

Warning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY