R3Y-MS8 [MSYSTEM]
Remote I/O R3 Series POTENTIOMETER INPUT MODULE;型号: | R3Y-MS8 |
厂家: | M-SYSTEM |
描述: | Remote I/O R3 Series POTENTIOMETER INPUT MODULE 输入元件 |
文件: | 总5页 (文件大小:132K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R3Y-MS8
EX-FACTORY SETTING
Remote I/O R3 Series
/SET: Preset according to the Ordering Information Sheet
(No. ESU-8402)
POTENTIOMETER INPUT MODULE
(8 points, isolated, connector type)
RELATED PRODUCTS
• Connector terminal block (model: CNT)
27.5 [1.08]
• Special cable with 40-pin connector (model: FCN)
GENERAL SPECIFICATIONS
Connection
130
[5.12]
Internal bus: Via the Installation Base (model: R3-BSx)
Input: 40-pin connector (Fujitsu FCN-365P040-AU)
Internal power: Via the Installation Base (model: R3-BSx)
Isolation: Input 1 to input 2 to input 3 to input 4 to input 5 to
input 6 to input 7 to input 8 to internal bus or internal power
Conversion rate: Selectable with the side DIP SW
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
ERR indicator: Bi-color (red/green) LED;
Red with input abnormality;
110
[4.33]
mm [inch]
MODEL: R3Y–MS8[1][2]
ORDERING INFORMATION
• Code number: R3Y-MS8[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R3Y-MS8W/CE/Q)
Green in normal operating conditions.
• Specify the specification for option code /Q
(e.g. /C01/SET)
INPUT SPECIFICATIONS
Minimum span: 50 % of the total resistance range
Excitation: Approx. 0.5 V DC
INPUT
Total resistance 500 Ω - 100 kΩ
INSTALLATION
NO. OF CHANNELS
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R3-BSx)
Weight: 200 g (0.44 lb)
8: 8
[1] COMMUNICATION MODE
S: Single
W: Dual
PERFORMANCE
Conversion accuracy: Refer to the table at the end of this
[2] OPTIONS (multiple selections)
Standards & Approvals
blank: Without CE
section.
The resolution and conversion accuracy are defined against
the potentiometer's total resistance. If the actual resistance
range (between the zero and span positions) is narrower
than the total resistance, the values change in proportion.
Using at least 50 % of the total resistance is basically
recommended.
/CE: CE marking
Other Options
blank: none
/Q: Option other than the above (specify the specification)
Conversion rate: 160 / 80 / 40 / 20 msec. selectable
Data range: 0 – 10000
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Data allocation: 8
Current consumption: Approx. 100 mA
Temp. coefficient: ±0.015 % /°C
/C02: Polyurethane coating
/C03: Rubber coating
Temperature coefficient is defined against the
R3Y-MS8 SPECIFICATIONS
ES-8956 Rev.9 Page 1/5
https://www.m-system.co.jp/
MODEL: R3Y-MS8
potentiometer's total resistance. If the actual resistance
range (between the zero and span positions) is narrower
than the total resistance, the values change in proportion.
Using at least 50 % of the total resistance is basically
recommended.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 500 V AC @ 1 minute (input 1 to input 2
to input 3 to input 4 to input 5 to input 6 to input 7 to input
8 to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
Conversion accuracy
CONVERSION RATE
160 msec. 80 msec.
40 msec.
1/2500
0.2%
20 msec.
1/1250
0.4%
Resolution 1/10000
Accuracy 0.05%
1/5000
0.1%
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EXTERNAL VIEW
■ SIDE VIEW
■ FRONT VIEW
RUN LED
ERR LED
• Pin Assignment
B
A
20 20
Input Connector
SW3
1
2
3
4
Conv.
Rate
ON
B
A
1
1
R3Y-MS8 SPECIFICATIONS
ES-8956 Rev.9 Page 2/5
https://www.m-system.co.jp/
MODEL: R3Y-MS8
EXTERNAL DIMENSIONS unit: mm [inch]
27.5 [1.08]
110 [4.33]
POSITIONING
GUIDE
R3Y-MS8 SPECIFICATIONS
ES-8956 Rev.9 Page 3/5
https://www.m-system.co.jp/
MODEL: R3Y-MS8
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
POTENTIOMETER
RUN LED ERR LED DIP SW
max.
Excitation
Generator
+
3
2
1
19B
18B
17B
Input Circuit
Input Circuit
Input Circuit
Input Circuit
Input Circuit
Input Circuit
Input Circuit
Input Circuit
INTERNAL BUS A
Communication
Circuit
INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
INPUT 6
INPUT 7
INPUT 8
INTERNAL BUS B*
–
min.
Control
Circuit
POTENTIOMETER
max.
Excitation
Generator
+
3
2
1
INTERNAL POWER
15B
14B
13B
–
min.
POTENTIOMETER
max.
Excitation
Generator
+
3
2
1
11B
10B
9B
–
min.
POTENTIOMETER
max.
Excitation
Generator
+
3
2
1
7B
6B
5B
–
min.
POTENTIOMETER
max.
Excitation
Generator
+
3
2
1
19A
18A
17A
–
min.
POTENTIOMETER
max.
Excitation
Generator
+
3
2
1
15A
14A
13A
–
min.
POTENTIOMETER
max.
Excitation
Generator
+
3
2
1
11A
10A
9A
–
min.
POTENTIOMETER
max.
Excitation
Generator
+
3
2
1
7A
6A
5A
–
min.
*For dual redundant communication.
• Unused Input Channels
Close across the unused input terminals as shown below.
INPUT 1
19B
INPUT 2
15B
INPUT 3
11B
INPUT 4
7B
18B
17B
14B
13B
10B
9B
6B
5B
SHORT
INPUT 5
19A
INPUT 6
15A
INPUT 7
11A
INPUT 8
7A
18A
17A
14A
13A
10A
9A
6A
5A
SHORT
The input will become unstable if unused channels are left open.
Unused channels can be specified and set so on the PC Configurator Software
(model: R3CON) without needing to short at the field terminals.
R3Y-MS8 SPECIFICATIONS
ES-8956 Rev.9 Page 4/5
https://www.m-system.co.jp/
MODEL: R3Y-MS8
INPUT CONNECTOR (40-pin)
PIN NO.
ASSIGNMENT
PIN NO.
ASSIGNMENT
1A
2A
3A
NC
NC
NC
1B
2B
3B
NC
NC
NC
4A
5A
6A
NC
4B
5B
6B
NC
IN8C
IN8B
IN4C
IN4B
7A
8A
9A
IN8A
NC
7B
8B
9B
IN4A
NC
IN7C
IN3C
10A
11A
12A
IN7B
IN7A
NC
10B
11B
12B
IN3B
IN3A
NC
13A
14A
15A
IN6C
IN6B
IN6A
13B
14B
15B
IN2C
IN2B
IN2A
16A
17A
18A
NC
16B
17B
18B
NC
IN5C
IN5B
IN1C
IN1B
19A
20A
IN5A
NC
19B
20B
IN1A
NC
Specifications are subject to change without notice.
R3Y-MS8 SPECIFICATIONS
ES-8956 Rev.9 Page 5/5
https://www.m-system.co.jp/
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明