R3Y-YV4S/Q [MSYSTEM]

Remote I/O R3 Series DC VOLTAGE OUTPUT MODULE;


型号：	R3Y-YV4S/Q
厂家：	M-SYSTEM
描述：	Remote I/O R3 Series DC VOLTAGE OUTPUT MODULE 输出元件
文件：	总3页 (文件大小：115K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R3-YV4

Remote I/O R3 Series

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R3-BSx)

Output: M3 separable screw terminal (torque 0.5 N·m)

Internal power: Via the Installation Base (model: R3-BSx)

Screw terminal: Nickel-plated steel

DC VOLTAGE OUTPUT MODULE

(4 points, isolated)

27.5 [1.08]

Isolation: Output 1 to output 2 to output 3 to output 4 to

internal bus or internal power

Output range: Selectable with the side DIP SW

Output hold function: Setting for communication error with

side DIP SW

130

[5.12]

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

ERR indicator: Green LED turns on in normal operating

conditions.

109

[4.29]

mm [inch]

MODEL: R3-YV4[1][2]

ORDERING INFORMATION

• Code number: R3-YV4[1][2]

OUTPUT SPECIFICATIONS

■ Narrow Span: -1 – +1 V, 0 – 1 V DC

Load resistance: 10 kΩ min.

Specify a code from below for each of [1] and [2].

(e.g. R3-YV4W/CE/Q)

■ Wide Span: -10 – +10 V, -5 – +5 V, 0 – 10 V, 0 – 5 V, 1 – 5

V DC

• Specify the specification for option code /Q

(e.g. /C01/SET)

Load resistance: 10 kΩ min.

■ Output Range

Except -10 to +10 V DC: -15 to +115 % of output range

-10 to +10 V DC: Approx. -11.5 to +11.5 V DC

NO. OF CHANNELS

4: 4

[1] COMMUNICATION MODE

S: Single

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R3-BSx)

Weight: 200 g (0.44 lb)

W: Dual

[2] OPTIONS (multiple selections)

Standards & Approvals

blank: Without CE

/CE: CE marking

PERFORMANCE

Conversion accuracy (Range):

Other Options

blank: none

-10 – +10 V : ±0.05 %

/Q: Option other than the above (specify the specification)

-5 – +5 V : ±0.05 %

-1 – +1 V : ±0.05 %

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

0 – 10 V : ±0.05 %

0 – 5 V : ±0.1 %

1 – 5 V : ±0.1 %

/C02: Polyurethane coating

0 – 1 V : ±0.1 %

/C03: Rubber coating

Data range: 0 – 10000 of the output range

Data allocation: 4

EX-FACTORY SETTING

/SET: Preset according to the Ordering Information Sheet

(No. ESU-8372)

Current consumption: 150 mA

Temp. coefficient: ±0.015 % /°C (±0.008 %/°F)

(±0.03 % /°C [±0.02 %/°F] with 0 – 5 V or 1 – 5 V range)

Response time: ≤ 0.2 sec. (0 – 90 %)

R3-YV4 SPECIFICATIONS

ES-8372 Rev.13 Page 1/3

https://www.m-system.co.jp/

MODEL: R3-YV4

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (output 1 to

output 2 to output 3 to output 4 to internal bus or internal

power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

FUNCTIONS

■OUTPUT HOLD or OUTPUT OFF

In normal conditions, the module outputs the signal from

the preferred bus A. When an error is detected, the output

is switched to the data from the bus B.

•Output Hold

If both are in error, the module holds the signal and stands

by until one of the communications recovers.

•Output OFF

If both are in error, the module outputs -15 % (or approx.

-11.5 V) and stands by until one of the communications

recovers.

At the startup, it outputs -15 % (or approx. -11.5 V) until the

communication is established and normal data is received.

EXTERNAL VIEW

■ FRONT VIEW

■ SIDE VIEW

RUN LED

ERR LED

Functions

SW3

SW2

SW1

Range

Output 2 (SW1)

Output 4 (SW2)

Output

Hold

Output 1 (SW1)

Output 3 (SW2)

R3-YV4 SPECIFICATIONS

ES-8372 Rev.13 Page 2/3

https://www.m-system.co.jp/

MODEL: R3-YV4

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

27.5 [1.08]

109 [4.29]

POSITIONING

GUIDE

20–M3

SCREW

TERMINAL

COVER

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

RUN LED ERR LED DIP SW

Output Circuit

INTERNAL BUS A

Communication

Circuit

–

* INTERNAL BUS B

WIDE SPAN

OUTPUT 1

OUTPUT 2

OUTPUT 3

OUTPUT 4

Control

Circuit

NARROW SPAN

WIDE SPAN

INTERNAL POWER

Output Circuit

NARROW SPAN

WIDE SPAN

NARROW SPAN

WIDE SPAN

NARROW SPAN

* For dual redundant communication.

Note: Connect either wide or narrow span terminals for each channel.

Specifications are subject to change without notice.

R3-YV4 SPECIFICATIONS

ES-8372 Rev.13 Page 3/3

https://www.m-system.co.jp/

相关型号：