R5-MS1AW [MSYSTEM]

Remote I/O R5 Series POTENTIOMETER INPUT MODULE;


型号：	R5-MS1AW
厂家：	M-SYSTEM
描述：	Remote I/O R5 Series POTENTIOMETER INPUT MODULE 输入元件
文件：	总3页 (文件大小：108K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R5-MS1A

I/O: Euro type connector terminal

Remote I/O R5 Series

(Applicable wire size: 0.2 – 2.5 mm

(AWG24 - 12),

stripped length 7 mm)

POTENTIOMETER INPUT MODULE

(re-transmitted output)

Internal power: Via the base (model: R5-BS)

Isolation: Input to output to internal bus or internal power

Zero/Span adj. mode selector: Rotary switch; monitor mode,

adj. mode and simulated output mode selectable

RUN indicator: Bi-color (red/green) LED;

18 (.71)

Red when the bus A operates normally;

7 ⁶

(3.54)

Green when the bus B operates normally;

Amber when both buses operate normally.

96.5

(3.80)

INPUT SPECIFICATIONS

Total resistance: 100 Ω – 10 kΩ

Minimum span: 50 % of the total resistance range

Excitation: 0.5 V DC

mm (inch)

MODEL: R5–MS1A[1][2]

OUTPUT SPECIFICATIONS

Operational range: Approx. 0 – 24 mA DC

ORDERING INFORMATION

• Code number: R5-MS1A[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R5-MS1AW/Q)

INSTALLATION

• Specify the specification for option code /Q

(e.g. /C01)

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

NO. OF CHANNELS

1: 1 channel

PERFORMANCE

Conversion accuracy

OUTPUT

Current

Input: ±0.1 %

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

Output: ±0.1 % of the retransmitted range + input

conversion accuracy

[1] COMMUNICATION MODE

S: Single

Data range: 0 – 10000 of the input range

Data allocation: 1

W: Dual

Temp. coefficient

Input: ±0.015 %/°C (±0.008 %/°F)

Output: ±0.02 %/°C (±0.01 %/°F)

Resolution: 1/10000 of the total resistance range

(Reduced by the actual range determined zero/ span

positions. Minimum 50 % of the total resistance range must

be maintained.)

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

Response time: ≤ 0.2 sec. (0 – 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (input to output

to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R5-BS)

R5-MS1A SPECIFICATIONS

ES-7580 Rev.6 Page 1/3

http://www.m-system.co.jp/

MODEL: R5-MS1A

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

FUNCTIONS

• Zero/Span Adjustment Modes

Monitor Mode

Re-transmits the input signal as output in proportion.

Input 0 % Adjustment Mode

Adjusts the 0% input signal. Press the UP button to set.

Input 100 % Adjustment Mode

Adjusts the 100 % input signal. Press the UP button to set.

Output 0 % Adjustment Mode

Adjusts the 0 % output signal using the UP/DOWN buttons,

in monitoring the output value with a multimeter.

SW1 through SW3 switch the internal increments by 1, 5

and 10.

Output 100 % Adjustment Mode

Adjusts the 100 % output signal using the UP/DOWN

buttons, in monitoring the output value with a multimeter.

SW4 through SW6 switch the internal increments by 1, 5

and 10.

Simulated Output Mode

Outputs the simulated signals of 0 %, 50 % and 100 %.

• How to Operate

1) Start up in Monitor Mode (SW position = 0) and wait for 2

or 3 seconds.

2) Switch to another mode and go through the adjustments.

3) Reset the switch to the position ‘0’ so that the new

setting is stored in the internal memory.

EXTERNAL VIEW

RUN

RUN LED

Zero/Span Adj.

Mode Selector

DOWN

UP Button

DOWN Button

Euro Type

Connector Terminal

R5-MS1A SPECIFICATIONS

ES-7580 Rev.6 Page 2/3

http://www.m-system.co.jp/

MODEL: R5-MS1A

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

LOCKING CLAMP

18 (.71)

6.5

90 (3.54)

(.26)

POSITIONING GUIDE

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

POTENTIOMETER

RUN LED

max.

Excitation

Generator

Input Circuit

INTERNAL BUS A

Communication

Circuit

INTERNAL BUS B*

–

min.

Control

Circuit

INTERNAL POWER

Output Driver

–

OUTPUT

UP/DOWN

BUTTONS

ROTARY SW

*For dual redundant communication.

Specifications are subject to change without notice.

R5-MS1A SPECIFICATIONS

ES-7580 Rev.6 Page 3/3

http://www.m-system.co.jp/

相关型号：