R5-RSA1W [MSYSTEM]

Remote I/O R5 Series;


型号：	R5-RSA1W
厂家：	M-SYSTEM
描述：	Remote I/O R5 Series
文件：	总3页 (文件大小：123K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R5-RSA

Isolation: Input 1 to input 2 to internal bus or internal power

Sensor type: Selectable with the side DIP SW

Temperature unit: °C or °F selectable with the side DIP SW

Burnout detection: Upscale or downscale selectable with the

side DIP SW

Remote I/O R5 Series

RTD INPUT MODULE

(high resolution)

18 (.71)

Linearization: Standard

RUN indicator: Bi-color (red/green) LED;

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

(3.54)

INPUT SPECIFICATIONS

Maximum leadwire resistance: 10 Ω per wire

Sensing current: ≤ 1 mA

96.5

(3.80)

mm (inch)

(Factory setting is Pt 100 (JIS '97, IEC))

MODEL: R5-RSA[1][2][3]

Temperature range

RTD

USABLE RANGE BURNOUT VALUES

°C

°C × 100

ORDERING INFORMATION

• Code number: R5-RSA[1][2][3]

Specify a code from below for each [1] through [3].

(e.g. R5-RSA2W/Q)

JPt 100 (JIS ’89)

Pt 100 (JIS ’89)

Pt 100 (JIS ’97, IEC)

RTD

-20 to +200

-23600, +32767

-24000, +32767

USABLE RANGE BURNOUT VALUES

• Specify the specification for option code /Q

(e.g. /C01)

°F

°F × 10

JPt 100 (JIS ’89)

Pt 100 (JIS ’89)

-4 to +392

-3928, +10400

-4000, +16500

Pt 100 (JIS ’97, IEC)

[1] NO. OF CHANNELS

1: 1 channel

2: 2 channels

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

[2] COMMUNICATION MODE

S: Single

W: Dual

[3] OPTIONS

blank: none

PERFORMANCE

Conversion accuracy: ±0.1°C (±0.2°F)

/Q: With options (specify the specification)

Data range

°C: Engineering unit value × 100 (integer)

°F: Engineering unit value × 10 (integer)

Data allocation: 1 (2 for 2-channel type)

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

Response time: ≤ 0.2 sec. (0 – 90 %)

Burnout response time: ≤ 2 sec.

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (input 1 to input

2 to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

GENERAL SPECIFICATIONS

Connection

Internal bus: Via the Installation Base (model: R5-BS)

Input: Euro type connector terminal

(Applicable wire size: 0.2 – 2.5 mm

(AWG24 - 12),

stripped length 7 mm)

Internal power: Via the base (model: R5-BS)

R5-RSA SPECIFICATIONS

ES-6130 Rev.4 Page 1/3

http://www.m-system.co.jp/

MODEL: R5-RSA

EXTERNAL VIEW

■ FRONT VIEW

■ SIDE VIEW

RUN

Function

RUN LED

1 2 3 4 5 6 7 8

RTD

Burnout

Temp. Unit

Euro Type

Connector Terminals

INPUT DATA DESCRIPTIONS

■ ANALOG DATA (TEMPERATURE DATA)

16-bit binary data.

With °C temperature unit, raw data is multiplied by 100. For example, 25.5°C is converted into 2550.

With °F temperature unit, raw data is multiplied by 10. For example, 135.4°F is converted into 1354.

Minus temperature is converted into negative values, represented in 2’s complements.

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

LOCKING CLAMP

18 (.71)

6.5

90 (3.54)

(.26)

POSITIONING GUIDE

*Euro type connector terminals (4, 5 and 6) provided only with 2-ch. option.

R5-RSA SPECIFICATIONS

ES-6130 Rev.4 Page 2/3

http://www.m-system.co.jp/

MODEL: R5-RSA

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

RUN LED DIP SW

Isolation

RTD

INTERNAL BUS A

Communication

Circuit

INTERNAL BUS B*

INPUT 1

Control

Circuit

INTERNAL POWER

Isolation

RTD

INPUT 2

*For dual redundant communication.

Note: The section enclosed by broken line is with 2-ch. option.

Specifications are subject to change without notice.

R5-RSA SPECIFICATIONS

ES-6130 Rev.4 Page 3/3

http://www.m-system.co.jp/

相关型号：