R5-SS1AS/Q [MSYSTEM]

Remote I/O R5 Series;


型号：	R5-SS1AS/Q
厂家：	M-SYSTEM
描述：	Remote I/O R5 Series
文件：	总3页 (文件大小：112K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R5-SS1A

I/O: Euro type connector terminal

Remote I/O R5 Series

(Applicable wire size: 0.2 – 2.5 mm

(AWG24 - 12),

stripped length 7 mm)

DC CURRENT INPUT MODULE

Internal power: Via the base (model: R5-BS)

Isolation: Input to output to internal bus or internal power

Zero/Span adj. mode selector: Rotary switch; monitor mode,

adj. mode and simulated output mode selectable

Input range: Selectable with the side DIP SW

RUN indicator: Bi-color (red/green) LED;

(re-transmitted output)

18 (.71)

7 ⁶

(3.54)

Red when the bus A operates normally;

Green when the bus B operates normally;

Amber when both buses operate normally.

96.5

(3.80)

mm (inch)

INPUT SPECIFICATIONS

■ Narrow Span: -1 – +1 mA, 0 – 1 mA DC

Input resistance: 2000 Ω resistor incorporated

■ Wide Span: -40 – +40 mA, -20 – +20 mA 0 – 40 mA,

0 – 20 mA, 4 – 20 mA DC

MODEL: R5–SS1A[1][2]

ORDERING INFORMATION

• Code number: R5-SS1A[1][2]

Specify a code from below for each of [1] and [2].

(e.g. R5-SS1AW/Q)

Input resistance: 50 Ω resistor incorporated

OUTPUT SPECIFICATIONS

Operational range: Approx. 0 – 24 mA DC

• Specify the specification for option code /Q

(e.g. /C01)

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R5-BS)

Weight: 100 g (3.53 oz)

NO. OF CHANNELS

1: 1 channel

OUTPUT

Current

A: 4 – 20 mA DC (Load resistance 600 Ω max.)

PERFORMANCE

Conversion accuracy

[1] COMMUNICATION MODE

S: Single

Input: ±0.1 %

Output: ±0.1 % of the retransmitted range + input

conversion accuracy

W: Dual

Data range: 0 – 10000 of the input range

Data allocation: 1

[2] OPTIONS

Temp. coefficient

blank: none

Input: ±0.015 %/°C (±0.008 %/°F)

Output: ±0.02 %/°C (±0.01 %/°F)

Response time: ≤ 0.2 sec. (0 – 90 %)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute (input to output

to internal bus or internal power)

2000 V AC @ 1 minute (power input to FG; isolated on the

power supply module)

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

GENERAL SPECIFICATIONS

Connection

STANDARDS & APPROVALS

EU conformity:

Internal bus: Via the Installation Base (model: R5-BS)

EMC Directive

R5-SS1A SPECIFICATIONS

ES-7577 Rev.7 Page 1/3

http://www.m-system.co.jp/

MODEL: R5-SS1A

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

FUNCTIONS

• Zero/Span Adjustment Modes

Monitor Mode

Re-transmits the input signal as output in proportion.

Output 0 % Adjustment Mode

Adjusts the 0 % output signal using the front UP/DOWN

buttons, in monitoring the output value with a multimeter.

SW1 through SW3 switch the internal increments by 1, 5

and 10.

Output 100 % Adjustment Mode

Adjusts the 100 % output signal using the front UP/DOWN

buttons, in monitoring the output value with a multimeter.

SW4 through SW6 switch the internal increments by 1, 5

and 10.

Simulated Output Mode

Outputs the simulated signals of 0 %, 50 % and 100 %.

• How to Operate

1) Start up in Monitor Mode (SW position = 0) and wait for 2

or 3 seconds.

2) Switch to another mode and go through the adjustments.

3) Reset the switch to the position ‘0’ so that the new

setting is stored in the internal memory.

EXTERNAL VIEW

■ SIDE VIEW

■ FRONT VIEW

RUN

RUN LED

Zero/Span Adj.

Mode Selector

1 2 3 4 5 6 7 8

DOWN

UP Button

Input

DOWN Button

Euro Type

Connector Terminal

R5-SS1A SPECIFICATIONS

ES-7577 Rev.7 Page 2/3

http://www.m-system.co.jp/

MODEL: R5-SS1A

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

LOCKING CLAMP

18 (.71)

6.5

90 (3.54)

(.26)

POSITIONING GUIDE

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

RUN LED DIP SW

Isolation

Communication

Circuit

INTERNAL BUS A

–

WIDE SPAN

NARROW SPAN

INTERNAL BUS B*

INPUT

Control

Circuit

INTERNAL POWER

Output Driver

–

OUTPUT

UP/DOWN

BUTTONS

ROTARY SW

*For dual redundant communication.

Note: Connect either wide or narrow span terminals for each channel.

Specifications are subject to change without notice.

R5-SS1A SPECIFICATIONS

ES-7577 Rev.7 Page 3/3

http://www.m-system.co.jp/

相关型号：