首页 |元器件品牌

R5H-DS1AS [MSYSTEM]

Remote I/O R5 Series 4 – 20 mA INPUT MODULE;
R5H-DS1AS
型号： R5H-DS1AS
厂家： M-SYSTEM    M-SYSTEM
描述：

Remote I/O R5 Series 4 – 20 mA INPUT MODULE

输入元件
文件： 总3页 (文件大小：113K)
中文：  中文翻译
下载：  下载PDF数据表文档文件
 查看货源
MODEL: R5-DS1A  
Remote I/O R5 Series  
GENERAL SPECIFICATIONS  
Connection  
Internal bus: Via the Installation Base (model: R5-BS)  
I/O: Euro type connector terminal  
4 – 20 mA INPUT MODULE  
(2-wire transmitter excitation supply;  
re-transmitted output)  
(Applicable wire size: 0.2 – 2.5 mm  
2
(AWG24 - 12),  
stripped length 7 mm)  
18 (.71)  
Internal power: Via the base (model: R5-BS)  
Isolation: Input to output to internal bus or internal power  
Zero/Span adj. mode selector: Rotary switch; monitor mode,  
adj. mode and simulated output mode selectable  
RUN indicator: Bi-color (red/green) LED;  
2
3
4
1
5
0
8
7 6  
9
90  
(3.54)  
Red when the bus A operates normally;  
Green when the bus B operates normally;  
96.5  
(3.80)  
Amber when both buses operate normally.  
mm (inch)  
SUPPLY OUTPUT  
MODEL: R5–DS1A[1][2]  
Output voltage: 24 – 29 V DC with no load  
Current rating: ≤ 22 mA DC  
• Shortcircuit Protection  
ORDERING INFORMATION  
• Code number: R5-DS1A[1][2]  
Specify a code from below for each of [1] and [2].  
(e.g. R5-DS1AW/Q)  
Current limited: 30 mA max.  
Protected time duration: No limit  
• Specify the specification for option code /Q  
(e.g. /C01)  
INPUT SPECIFICATIONS  
■ DC Current: 4 – 20 mA DC  
Input resistance: 250 Ω resistor incorporated  
NO. OF CHANNELS  
1: 1 channel  
OUTPUT SPECIFICATIONS  
Operational range: Approx. 0 – 24 mA DC  
OUTPUT  
Current  
INSTALLATION  
Operating temperature: -10 to +55°C (14 to 131°F)  
Operating humidity: 30 to 90 %RH (non-condensing)  
Atmosphere: No corrosive gas or heavy dust  
Mounting: Installation Base (model: R5-BS)  
Weight: 100 g (3.53 oz)  
A: 4 – 20 mA DC (Load resistance 600 Ω max.)  
[1] COMMUNICATION MODE  
S: Single  
W: Dual  
PERFORMANCE  
Conversion accuracy  
[2] OPTIONS  
blank: none  
Input: ±0.05 %  
Output: ±0.1 % of the retransmitted range + input  
conversion accuracy  
/Q: With options (specify the specification)  
Data range: 0 – 10000 of the input range  
Data allocation: 1  
SPECIFICATIONS OF OPTION: Q  
COATING (For the detail, refer to M-System's web site.)  
/C01: Silicone coating  
Temp. coefficient  
Input: ±0.015 %/°C (±0.008 %/°F)  
Output: ±0.02 %/°C (±0.01 %/°F)  
Response time: ≤ 0.2 sec. (0 – 90 %)  
Insulation resistance: ≥ 100 MΩ with 500 V DC  
Dielectric strength: 1500 V AC @ 1 minute (input to output  
to internal bus or internal power)  
/C02: Polyurethane coating  
/C03: Rubber coating  
R5-DS1A SPECIFICATIONS  
ES-7562 Rev.7 Page 1/3  
http://www.m-system.co.jp/  
MODEL: R5-DS1A  
2000 V AC @ 1 minute (power input to FG; isolated on the  
power supply module)  
STANDARDS & APPROVALS  
EU conformity:  
EMC Directive  
EMI EN 61000-6-4  
EMS EN 61000-6-2  
RoHS Directive  
EN 50581  
FUNCTIONS  
• Zero/Span Adjustment Modes  
Monitor Mode  
Re-transmits the input signal as output in proportion.  
Output 0 % Adjustment Mode  
Adjusts the 0 % output signal using the front UP/DOWN  
buttons, in monitoring the output value with a multimeter.  
SW1 through SW3 switch the internal increments by 1, 5  
and 10.  
Output 100 % Adjustment Mode  
Adjusts the 100 % output signal using the front UP/DOWN  
buttons, in monitoring the output value with a multimeter.  
SW4 through SW6 switch the internal increments by 1, 5  
and 10.  
Simulated Output Mode  
Outputs the simulated signals of 0 %, 50 % and 100 %.  
• How to Operate  
1) Start up in Monitor Mode (SW position = 0) and wait for 2  
or 3 seconds.  
2) Switch to another mode and go through the adjustments.  
3) Reset the switch to the position ‘0’ so that the new  
setting is stored in the internal memory.  
EXTERNAL VIEW  
RUN  
RUN LED  
Zero/Span Adj.  
Mode Selector  
UP  
DOWN  
UP Button  
DOWN Button  
4
1
5
2
6
3
Euro Type  
Connector Terminals  
R5-DS1A SPECIFICATIONS  
ES-7562 Rev.7 Page 2/3  
http://www.m-system.co.jp/  
MODEL: R5-DS1A  
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)  
LOCKING CLAMP  
18 (.71)  
6.5  
90 (3.54)  
(.26)  
4
1
5
2
6
3
POSITIONING GUIDE  
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM  
RUN LED  
+
2
Isolation  
150Ω  
100Ω  
INTERNAL BUS A  
Communication  
Circuit  
INPUT  
INTERNAL BUS B*  
–
+
3
1
2W-XMTR EXC  
Control  
Circuit  
Excitation  
Supply  
INTERNAL POWER  
OUTPUT  
Output Driver  
4
5
6
+
–
UP/DOWN  
BUTTONS  
ROTARY SW  
*For dual redundant communication.  
■ When Used as DC Supply  
■ When Used as Current Input  
2-WIRE  
TRANSMITTER  
–
2
+ 2  
+
150Ω  
100Ω  
150Ω  
INPUT  
100Ω  
3
1
– 3  
–
+
+
+ 1  
Specifications are subject to change without notice.  
R5-DS1A SPECIFICATIONS  
ES-7562 Rev.7 Page 3/3  
http://www.m-system.co.jp/  

相关型号：

R5H-DS1AS/Q

 Remote I/O R5 Series 4 – 20 mA INPUT MODULE
MSYSTEM

R5H-DS1AW

 Remote I/O R5 Series 4 – 20 mA INPUT MODULE
MSYSTEM

R5H-DS1AW/Q

 Remote I/O R5 Series 4 – 20 mA INPUT MODULE
MSYSTEM

R5H-RS1A1S

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H-RS1A1W

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H-RS1A3S

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H-RS1A3W

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H-RS1B1S

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H-RS1B1W

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H-RS1B3S

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H-RS1B3W

 High Accuracy Remote I/O R5H Series 4-WIRE RTD INPUT MODULE
MSYSTEM

R5H30211

 8-BIT, MROM, 8MHz, MICROCONTROLLER, PQCC20, PLASTIC, VQFN-20
RENESAS
©2020 ICPDF网 联系我们和版权申明