R5T-CTB1W/Q [MSYSTEM]
Remote I/O R5 Series;型号: | R5T-CTB1W/Q |
厂家: | M-SYSTEM |
描述: | Remote I/O R5 Series |
文件: | 总3页 (文件大小:115K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R5T-CTB
•Clamp-on current sensor (model: CLSB-20)
Remote I/O R5 Series
•Clamp-on current sensor (model: CLSB-40)
•Clamp-on current sensor (model: CLSB-60)
The clamp-on current sensor, not included in the product
package, must be ordered separately.
AC CURRENT INPUT MODULE
(clamp-on current sensor type CLSB use;
screw terminal block; true RMS sensing)
Refer to the data sheet for the sensor for more information
such as applicable wire diameter.
18 (.71)
GENERAL SPECIFICATIONS
Connection
90
(3.54)
Internal bus: Via the Installation Base (model: R5-BS)
Input: M3.5 screw terminal block (torque 0.8 N·m)
Internal power: Via the base (model: R5-BS)
Screw terminal: Nickel-plated steel (standard) or stainless
steel
137
(5.39)
mm (inch)
Isolation: Input 1 to input 2 to internal bus or internal power
Input waveform
MODEL: R5T-CTB[1][2][3]
RMS sensing: Up to 15 % of 3rd harmonic content
Input range: Selectable with the side DIP SW
RUN indicator: Bi-color (red/green) LED;
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
Low-end cutout: Converted as 0 % for the input below 2 %
ORDERING INFORMATION
Code number: R5T-CTB[1][2][3]
Specify a code from below for each [1] through [3].
(e.g. R5T-CTB2W/Q)
• Specify the specification for option code /Q
(e.g. /C01/S01)
INPUT SPECIFICATIONS
Input (sensor & range)
[1] NO. OF CHANNELS
1: 1 channel
CLSB-05: 0 – 50A AC
CLSB-10: 0 – 100A AC
2: 2 channels
CLSB-20: 0 – 200A AC
CLSB-40: 0 – 400A AC
[2] COMMUNICATION MODE
S: Single
CLSB-60: 0 – 600A AC
(Operational range for the CLSB-60 is limited up to approx.
109 % (65535).
W: Dual
Frequency: 50 or 60 Hz
Operational range: 5 – 115 % of rating
Max. working voltage: 440 V AC (primary side)
[3] OPTIONS
blank: none
/Q: With options (specify the specification)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 110 g (0.24 lb)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
RELATED PRODUCTS
•Clamp-on current sensor (model: CLSB-05)
•Clamp-on current sensor (model: CLSB-10)
R5T-CTB SPECIFICATIONS
ES-7555 Rev.3 Page 1/3
http://www.m-system.co.jp/
MODEL: R5T-CTB
PERFORMANCE
Conversion accuracy: ±0.5 % (at 5 – 100 % input) except
the sensor accuracy
Data range: Engineering unit value × 100 (binary without
sign)
Data allocation: 1 (2 for 2-channel type)
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
Response time: ≤ 0.5 sec. (0 – 90 %)
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input 1 to input
2 to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
EXTERNAL VIEW
■ SIDE VIEW
■ FRONT VIEW
1 2 3 4 5 6 7 8
RUN
RUN LED
Input 1
Input 2
5
2
6
3
INPUT DATA DESCRIPTIONS
■ ANALOG DATA (AC CURRENT DATA.)
16-bit binary data.
Integer obtained by multiplying unit value (A) by 100.
15
0
R5T-CTB SPECIFICATIONS
ES-7555 Rev.3 Page 2/3
http://www.m-system.co.jp/
MODEL: R5T-CTB
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
LOCKING CLAMP
18 (.71)
38.5 (1.52)
98.5 (3.88)
TERMINAL COVER
4–M3.5
TERMINAL
SCREWS
5
2
6
3
7.2 (.28)
POSITIONING GUIDE
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
RUN LED DIP SW
SOURCE
Input Circuit
INTERNAL BUS A
k
Communication
Circuit
2
3
INTERNAL BUS B*
INPUT 1
CLAMP-ON SENSOR
l
Control
Circuit
LOAD
INTERNAL POWER
SOURCE
Input Circuit
k
5
6
INPUT 2
CLAMP-ON SENSOR
l
LOAD
*For dual redundant communication.
Note: The section enclosed by broken line is with 2-ch. option.
Specifications are subject to change without notice.
R5T-CTB SPECIFICATIONS
ES-7555 Rev.3 Page 3/3
http://www.m-system.co.jp/
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明