R5T-PA22W [MSYSTEM]
Remote I/O R5 Series TOTALIZED PULSE INPUT MODULE;型号: | R5T-PA22W |
厂家: | M-SYSTEM |
描述: | Remote I/O R5 Series TOTALIZED PULSE INPUT MODULE 输入元件 |
文件: | 总3页 (文件大小:116K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R5T-PA2
steel
Remote I/O R5 Series
Isolation: Pi 1 to Pi 2 to internal bus or internal power
RUN indicator: Bi-color (red/green) LED;
TOTALIZED PULSE INPUT MODULE
(screw terminal block; Pi 2 points)
18 (.71)
Red when the bus A operates normally;
Green when the bus B operates normally;
Amber when both buses operate normally.
Input status indicator: Red LED; turns on with the input ON.
Count reset: Via DIP switches on the side
90
(3.54)
INPUT SPECIFICATIONS
Input: Dry contact, 2 points
Common: All negatives
137
(5.39)
Contact detecting: Max. 24 V DC
mm (inch)
ON voltage, current: ≥ 15 V, ≥ 2.5 mA
OFF voltage, current: ≤ 6 V, ≤ 1 mA
Maximum frequency: 100 Hz (duty ratio 30 – 70 %)
Totalized pulse range: 1 – 10000 (‘0’ at reset)
Max. pulse range selectable from 100 to 60000 using the
R5CON PC Configurator Software. Refer to the R5CON Users
Manual for detailed information.
MODEL: R5T–PA2[1]{2]
ORDERING INFORMATION
• Code number: R5T-PA2[1][2]
Specify a code from below for each [1] and [2].
(e.g. R5T-PA2W/Q)
Count at overflow: Reset and restart at ‘1.’
• Specify the specification for option code /Q
(e.g. /C01/S01)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R5-BS)
Weight: 110 g (0.24 lb)
NO. OF CHANNELS
2: 2-point inputs
[1] COMMUNICATION MODE
S: Single
PERFORMANCE
Data allocation: 2
W: Dual
Response time: ≤ 0.1 sec.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(Pi 1 to Pi 2 to internal bus or internal power)
2000 V AC @ 1 minute (power input to FG; isolated on the
power supply module)
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
STANDARDS & APPROVALS
EU conformity:
/C02: Polyurethane coating
EMC Directive
/C03: Rubber coating
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
TERMINAL SCREW MATERIAL
/S01: Stainless steel
EN 50581
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R5-BS)
Input: M3.5 screw terminal block (torque 0.8 N·m)
Internal power: Via the base (model: R5-BS)
Screw terminal: Nickel-plated steel (standard) or stainless
R5T-PA2 SPECIFICATIONS
ES-7573 Rev.8 Page 1/3
http://www.m-system.co.jp/
MODEL: R5T-PA2
FUNCTIONS
■ Counter Reset
1) Remove Network Module or its cables and interrupt
communication with other devices.
2) Turn ON the Counter Reset SW (SW8) on the module.
3) Return the module to the base and turn the power supply
on.
4) Red RUN LED turns on and the module starts resetting its
counter. When the resetting is complete, the LED light turns
to green. DO NOT remove the power while the red light is
on.
5) After the green LED is confirmed, turn the power supply
off.
6) Turn OFF the Counter Reset SW (SW8).
7) Return the Network module onto the base and turn the
power supply on.
Note: Counter Reset SW must be turned OFF after this
procedure because the module does not start counting with
ON state.
EXTERNAL VIEW
■ SIDE VIEW
■ FRONT VIEW
RUN LED
RUN
1
2
3
4
Status Indicator LED
1 2 3 4 5 6 7 8
4
5
6
3
Counter
Reset
1
2
Counter Reset SW is normally OFF during operation.
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
LOCKING CLAMP
18 (.71)
38.5 (1.52)
98.5 (3.88)
TERMINAL COVER
8.2 (.32)
6–M3.5
TERMINAL
SCREWS
4
5
2
6
3
7.2 (.28)
POSITIONING GUIDE
1
R5T-PA2 SPECIFICATIONS
ES-7573 Rev.8 Page 2/3
http://www.m-system.co.jp/
MODEL: R5T-PA2
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
RUN INPUT STATUS
LED INDICATOR LED
•
• • • •
Isolation
Isolation
INTERNAL BUS A
1
3
Communication
Circuit
1
3
4
6
2
5
Pi 1
COM1(–)
Pi 2
INTERNAL BUS B*
Control
Circuit
INTERNAL POWER
COM2(–)
DIP SW
*For dual redundant communication.
Note: Italic typed numbers correspond to the LEDs on the front panel.
Specifications are subject to change without notice.
R5T-PA2 SPECIFICATIONS
ES-7573 Rev.8 Page 3/3
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明