R6N-BS8P [MSYSTEM]
Remote I/O R6 Series INSTALLATION BASE;型号: | R6N-BS8P |
厂家: | M-SYSTEM |
描述: | Remote I/O R6 Series INSTALLATION BASE |
文件: | 总5页 (文件大小:317K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
MODEL: R6N-BS
•R6N-BS8P: I/O / power supply module, 8 slots
Remote I/O R6 Series
Housing material: Flame-resistant resin (black)
INSTALLATION BASE
(Screw terminal)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Construction: DIN rail or surface mounting
Weight (No remote I/O module mounted)
R6N-BS8A: 80 g (2.8 oz)
Functions & Features
· Installation base dedicated to Remote I/O R6 Series
R6N-BS8B: 95 g (3.4 oz)
R6N-BS8P: 50 g (1.8 oz)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(internal power or internal field signal to ground)
MODEL: R6N-BS[1][2]
STANDARDS & APPROVALS
EU conformity:
ORDERING INFORMATION
• Code number: R6N-BS[1][2]
Specify a code from below for each [1] and [2].
(e.g. R6N-BS8A/Q)
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
• Specify the specification for option code /Q
(e.g. /C01)
EN 50581
[1] NUMBER OF SLOTS
8A: 8 I/O slots + Network Module (18 mm wide)
8B: 8 I/O slots + Network Module (36.5 mm wide)
(Selectable only for using with R6-NF1, R6-NC3/W or R6-PSM)
8P: 8 I/O slots for extension
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Construction: DIN rail or surface mounting
Capacity:
•R6N-BS8A: I/O / power supply module, 8 slots + network
(18 mm wide) module
•R6N-BS8B: I/O / power supply module, 8 slots + network
(36.5 mm wide) module
R6N-BS SPECIFICATIONS
ES-7781-AL Rev.0 Page 1/5
http://www.m-system.co.jp/
MODEL: R6N-BS
EXTERNAL VIEW
Mount I/O and power supply modules, starting from the left end.
The power supply module could be mounted at any slots, however, installing them at either end is generally recommended.
■ R6N-BS8A
■ R6N-BS8B
■ R6N-BS8P
• R6-NF1
• R6-PSM
Network
Module
I/O & Power Supply
Modules
Network
Module
I/O & Power Supply
Modules
Power SupplyNetwork
I/O & Power Supply
Modules
Module
Module
I/O Modules
1 2 3 ・ ・ ・
8
1 2 3 ・ ・ ・
8
1 2 3 ・ ・ ・
8
1 2 3 ・ ・ ・
8
R6N-BS SPECIFICATIONS
ES-7781-AL Rev.0 Page 2/5
http://www.m-system.co.jp/
MODEL: R6N-BS
EXTERNAL DIMENSIONS unit: mm (inch)
• R6N-BS8A
3 (.12)
85 (3.35)
[3 (.12)]
[5 (.20)]
27 (1.06)
30.8 (1.21)
3–4.5 (.18) dia.
MTG HOLE
2 (.08) deep
DIN RAIL
35mm wide
49.8 (1.96)
22.5 (.89)
116 (4.57)
• R6N-BS8P
• R6N-BS8B
11.5 (.45)
61.6 (2.43)
30.8 (1.21)
[3 (.12)]
3 (.12)
104 (4.09)
[3 (.12)]
30.8 (1.21)
3–4.5 (.18) dia.
MTG HOLE
2 (.08) deep
3–4.5 (.18) dia.
MTG HOLE
2 (.08) deep
49.8 (1.96)
49.8 (1.96)
R6N-BS SPECIFICATIONS
ES-7781-AL Rev.0 Page 3/5
http://www.m-system.co.jp/
MODEL: R6N-BS
MOUNTING REQUIREMENTS unit: mm (inch)
■ MOUNTING DIRECTION
The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,
may shorten the product’s life expectation or deteriorate its performance.
Panel ceiling or wiring conduit
(height ≤ 50 mm or 2 in.)
R6N-BS
10
10
(.39)
(.39)
Panel bottom or wiring conduit
(height ≤ 50 mm or 2 in.)
■ SURFACE MOUNTING
+
• R6N-BS8A
• R6N-BS8A BS8P
57.2 (2.25)
33.8 (1.33)
57.2 (2.25)
30.8 (1.21)
n–M4 *
3–M4
49.8 (1.96)
49.8 (1.96)
49.8 (1.96)
11.8 (.46)
+
• R6N-BS8B BS8P
• R6N-BS8B
30.8 (1.21)
76.2 (3.00)
76.2 (3.00)
33.8 (1.33)
n–M4 *
3–M4
49.8 (1.96)
49.8 (1.96)
11.8 (.46)
49.8 (1.96)
*Number of bases x 3
R6N-BS SPECIFICATIONS
ES-7781-AL Rev.0 Page 4/5
http://www.m-system.co.jp/
MODEL: R6N-BS
Specifications are subject to change without notice.
R6N-BS SPECIFICATIONS
ES-7781-AL Rev.0 Page 5/5
http://www.m-system.co.jp/
相关型号:
©2020 ICPDF网 联系我们和版权申明