R6N-TS2A/Q [MSYSTEM]
Remote I/O R6 Series THERMOCOUPLE INPUT MODULE;
| 型号： | R6N-TS2A/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R6 Series THERMOCOUPLE INPUT MODULE 输入元件 |
| 文件： | 总3页 (文件大小：136K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R6N-TS2A
Remote I/O R6 Series
GENERAL SPECIFICATIONS
Connection
Internal bus: Via the Installation Base (model: R6N-BS)
Input: M3 screw terminals (torque 0.5 N·m)
Internal power: Via the Installation Base (model: R6N-BS)
Recommended solderless terminal: Max. 5.8 mm (0.23”)
wide; Ones with insulation sleeve do not fit.
THERMOCOUPLE INPUT MODULE
(high-accuracy, 2 points, Screw terminal)
Functions & Features
• Accepts direct input from an thermocouple and provides
an isolated, linearized DC signal compact size remote I/O
module
Applicable wire size: 0.2 – 2.5 mm
2
Housing material: Flame-resistant resin (black)
Isolation: Input 1 to input 2 to internal bus or internal power
Zero adjustments: PC programming
7.5 (.30)
Span adjustments: PC programming
Input type: Selectable with the side DIP SW or PC
programming
102
(4.02)
Burnout detection: Upscale or downscale selectable with the
side DIP SW or PC programming
Linearization: Standard
Cold junction compensation: CJC sensor attached to the
input terminals
102
(4.02)
mm (inch)
Module address: Selectable with DIP and rotary switches on
the side
Configuration mode: With DIP switches on the side panel
Power indicator: Green LED; Refer to the istruction manual
for details.
MODEL: R6N–TS2A[1]
Status indicator: Bi-color (red/green) LED;
Refer to the instruction manual for details.
■Recommended solderless terminal (unit: mm (inch))
ORDERING INFORMATION
• Code number: R6N-TS2A[1]
Specify a code from below for [1].
(e.g. R6N-TS2A/Q)
5.5 max.
(.22)
4 min.
(.16)
3.2 (.13) dia.
• Specify the specification for option code /Q
(e.g. /C01)
[1] OPTIONS
blank: none
/Q: With options (specify the specification)
INPUT SPECIFICATIONS
Thermocouple: K, E, J, T, B, R, S, C, N, U, L, P, PR
Input resistance: 30 kΩ min.
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Burnout sensing: ≤ 0.1 μA
USABLE
CONFORMANCE
T/C
K (CA)
/C02: Polyurethane coating
RANGE (°C)
RANGE (°C)
-272 to +1472
-272 to +1100
-260 to +1300
-150 to +1370
-170 to +1000
-180 to +1200
E (CRC)
J (IC)
RELATED PRODUCTS
• PC configurator software (model: R6CON)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
T (CC)
B (RH)
R
-272 to +500
24 to 1920
-100 to +1860
-170 to +400
1000 to 1760
380 to 1760
S
-100 to +1860
-52 to +2416
-272 to +1400
400 to 1760
100 to 2315
-130 to +1300
C (WRe 5-26)
N
U
-252 to +700
-252 to +1000
-52 to +1496
-52 to +1860
-200 to +600
-200 to +900
0 to 1395
L
P (Platinel II)
(PR)
300 to 1760
R6N-TS2A SPECIFICATIONS
ES-7781-BR Rev.0 Page 1/3
http://www.m-system.co.jp/
MODEL: R6N-TS2A
INSTALLATION
Current consumption: 20 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: Installation Base (model: R6N-BS)
Weight: 70 g (2.5 oz)
PERFORMANCE
Conversion accuracy: ±0.5°C (±0.9°F) except ±1°C
(±1.8°F) for B, R, S, C, PR
Conversion rate: 250 msec. / 500 msec.(PC programmable.
Factory set to 500 msec.)
Converted data range:
•Engineering unit value (°C, K) × 10 (integer)
•Engineering unit value (°F)
Data allocation: 2
Cold junction compensation error:
±1°C max. at 25 ±10°C
±1.8°F max. at 77 ±18°F
Temp. coefficient: ±0.01 %/°C (±0.006 %/°F) of max. span
Response time: Conversion rate × 2 + 50 msec. or less
Line voltage effect: ±0.1 % over voltage range
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute (input 1 to input
2 to internal bus or internal power to ground)
EXTERNAL VIEW
• Front View (cover opened)
• Side View
Operating Mode
Setting
5
6
7
8
Power LED
Status LED
Module Address
Setting
8
0
1
2
3
4
Refer to the instruction manual for setting procedures.
R6N-TS2A SPECIFICATIONS
ES-7781-BR Rev.0 Page 2/3
http://www.m-system.co.jp/
MODEL: R6N-TS2A
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
SCREWDRIVER
INSERTION ANGLE
: approx. 55°
*
WIRE INSERTION ANGLE
: approx. 35°
8–M3
SCREW TERMINAL
5
6
7
8
1
2
3
4
102 (4.02)
7.5 (.30)
*Screwdriver stem diameter: 6 mm (.24”) or less
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
STATUS LED
comp. leadwire
Input Circuit
T/C
+
Comm.
Circuit
+
1
3
2
4
INTERNAL BUS
INPUT 1
−
-
POWER LED
Control
Circuit
CJC
SENSOR
INTERNAL POWER
Input Circuit
comp. leadwire
T/C
+
+
5
7
6
8
INPUT 2
−
-
ROTARY SW
DIP SW
CJC
SENSOR
Specifications are subject to change without notice.
R6N-TS2A SPECIFICATIONS
ES-7781-BR Rev.0 Page 3/3
http://www.m-system.co.jp/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明