R6N-BS [MSYSTEM]

Remote I/O R6 Series INSTALLATION BASE;


型号：	R6N-BS
厂家：	M-SYSTEM
描述：	Remote I/O R6 Series INSTALLATION BASE
文件：	总5页 (文件大小：317K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R6N-BS

•R6N-BS8P: I/O / power supply module, 8 slots

Remote I/O R6 Series

Housing material: Flame-resistant resin (black)

INSTALLATION BASE

(Screw terminal)

INSTALLATION

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Construction: DIN rail or surface mounting

Weight (No remote I/O module mounted)

R6N-BS8A: 80 g (2.8 oz)

Functions & Features

· Installation base dedicated to Remote I/O R6 Series

R6N-BS8B: 95 g (3.4 oz)

R6N-BS8P: 50 g (1.8 oz)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute

(internal power or internal field signal to ground)

MODEL: R6N-BS[1][2]

STANDARDS & APPROVALS

EU conformity:

ORDERING INFORMATION

• Code number: R6N-BS[1][2]

Specify a code from below for each [1] and [2].

(e.g. R6N-BS8A/Q)

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

• Specify the specification for option code /Q

(e.g. /C01)

EN 50581

[1] NUMBER OF SLOTS

8A: 8 I/O slots + Network Module (18 mm wide)

8B: 8 I/O slots + Network Module (36.5 mm wide)

(Selectable only for using with R6-NF1, R6-NC3/W or R6-PSM)

8P: 8 I/O slots for extension

[2] OPTIONS

blank: none

/Q: With options (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

Only solder side of the PWB is coated.

/C01: Silicone coating

/C02: Polyurethane coating

GENERAL SPECIFICATIONS

Construction: DIN rail or surface mounting

Capacity:

•R6N-BS8A: I/O / power supply module, 8 slots + network

(18 mm wide) module

•R6N-BS8B: I/O / power supply module, 8 slots + network

(36.5 mm wide) module

R6N-BS SPECIFICATIONS

ES-7781-AL Rev.0 Page 1/5

http://www.m-system.co.jp/

MODEL: R6N-BS

EXTERNAL VIEW

Mount I/O and power supply modules, starting from the left end.

The power supply module could be mounted at any slots, however, installing them at either end is generally recommended.

■ R6N-BS8A

■ R6N-BS8B

■ R6N-BS8P

• R6-NF1

• R6-PSM

Network

Module

I/O & Power Supply

Modules

Network

Module

I/O & Power Supply

Modules

Power SupplyNetwork

I/O & Power Supply

Modules

Module

I/O Modules

1 2 3 ・・・

R6N-BS SPECIFICATIONS

ES-7781-AL Rev.0 Page 2/5

http://www.m-system.co.jp/

MODEL: R6N-BS

EXTERNAL DIMENSIONS unit: mm (inch)

• R6N-BS8A

3 (.12)

85 (3.35)

[3 (.12)]

[5 (.20)]

27 (1.06)

30.8 (1.21)

3–4.5 (.18) dia.

MTG HOLE

2 (.08) deep

DIN RAIL

35mm wide

49.8 (1.96)

22.5 (.89)

116 (4.57)

• R6N-BS8P

• R6N-BS8B

11.5 (.45)

61.6 (2.43)

30.8 (1.21)

[3 (.12)]

3 (.12)

104 (4.09)

[3 (.12)]

30.8 (1.21)

3–4.5 (.18) dia.

MTG HOLE

2 (.08) deep

3–4.5 (.18) dia.

MTG HOLE

2 (.08) deep

49.8 (1.96)

R6N-BS SPECIFICATIONS

ES-7781-AL Rev.0 Page 3/5

http://www.m-system.co.jp/

MODEL: R6N-BS

MOUNTING REQUIREMENTS unit: mm (inch)

■ MOUNTING DIRECTION

The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,

may shorten the product’s life expectation or deteriorate its performance.

Panel ceiling or wiring conduit

(height ≤ 50 mm or 2 in.)

R6N-BS

(.39)

Panel bottom or wiring conduit

(height ≤ 50 mm or 2 in.)

■ SURFACE MOUNTING

• R6N-BS8A

• R6N-BS8A BS8P

57.2 (2.25)

33.8 (1.33)

57.2 (2.25)

30.8 (1.21)

n–M4 *

3–M4

49.8 (1.96)

11.8 (.46)

• R6N-BS8B BS8P

• R6N-BS8B

30.8 (1.21)

76.2 (3.00)

33.8 (1.33)

n–M4 *

3–M4

49.8 (1.96)

11.8 (.46)

49.8 (1.96)

*Number of bases x 3

R6N-BS SPECIFICATIONS

ES-7781-AL Rev.0 Page 4/5

http://www.m-system.co.jp/

MODEL: R6N-BS

Specifications are subject to change without notice.

R6N-BS SPECIFICATIONS

ES-7781-AL Rev.0 Page 5/5

http://www.m-system.co.jp/

相关型号：