R6S-BS8B/Q [MSYSTEM]
Remote I/O R6 Series INSTALLATION BASE;
| 型号： | R6S-BS8B/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R6 Series INSTALLATION BASE |
| 文件： | 总5页 (文件大小：333K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R6S-BS
•R6S-BS8P: I/O / power supply module, 8 slots
Remote I/O R6 Series
Housing material: Flame-resistant resin (black)
INSTALLATION BASE
(Tension clamp)
INSTALLATION
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Construction: DIN rail or surface mounting
Weight (No remote I/O module mounted)
R6S-BS8A: 80 g (2.8 oz)
Functions & Features
· Installation base dedicated to Remote I/O R6 Series
R6S-BS8B: 95 g (3.4 oz)
R6S-BS8P: 50 g (1.8 oz)
PERFORMANCE
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 2000 V AC @ 1 minute
(internal power or internal field signal to ground)
MODEL: R6S-BS[1][2]
STANDARDS & APPROVALS
EU conformity:
ORDERING INFORMATION
• Code number: R6S-BS[1][2]
Specify a code from below for each of [1] and [2].
(e.g. R6S-BS8A/Q)
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
• Specify the specification for option code /Q
(e.g. /C01)
[1] NUMBER OF SLOTS
8A: 8 I/O slots + Network Module (18 mm wide)
8B: 8 I/O slots + Network Module (36.5 mm wide)
(Selectable only for using with R6-NF1, R6-NC3/W or R6-PSM)
8P: 8 I/O slots for extension
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
Only solder side of the PWB is coated.
/C01: Silicone coating
/C02: Polyurethane coating
GENERAL SPECIFICATIONS
Construction: DIN rail or surface mounting
Capacity:
•R6S-BS8A: I/O / power supply module, 8 slots + network
(18 mm wide) module
•R6S-BS8B: I/O / power supply module, 8 slots + network
(36.5 mm wide) module
R6S-BS SPECIFICATIONS
ES-7781-AW Rev.1 Page 1/5
https://www.m-system.co.jp/
MODEL: R6S-BS
EXTERNAL VIEW
Mount I/O and power supply modules, starting from the left end.
The power supply module could be mounted at any slots, however, installing them at either end is generally recommended.
■ R6S-BS8A
■ R6S-BS8B
■ R6S-BS8P
• R6-NF1
• R6-PSM
Network I/O & Power Supply
Module
Network
Module
I/O & Power Supply
Modules
Power Supply Network
I/O & Power Supply
Modules
Modules
Module
Module
I/O Modules
1 2 3 ・・・
8
1 2 3 ・・・
8
1 2 3 ・・・
8
1 2 3 ・・・ 8
R6S-BS SPECIFICATIONS
ES-7781-AW Rev.1 Page 2/5
https://www.m-system.co.jp/
MODEL: R6S-BS
EXTERNAL DIMENSIONS unit: mm [inch]
• R6S-BS8A
(5 [.20])
27 [1.06]
3 [.12]
72 [2.83]
(3 [.12])
24.4 [.96]
3–4.5 [.18] dia.
MTG HOLE
2 [.08] deep
DIN RAIL
35mm wide
37 [1.46]
22.5 [.89]
116 [4.57]
• R6S-BS8P
• R6S-BS8B
11.5 [.45]
49 [1.93]
24.4 [.96]
(3 [.12])
(3 [.12])
91 [3.58]
3 [.12]
3–4.5 [.18] dia.
MTG HOLE
2 [.08] deep
24.4 [.96]
3–4.5 [.18] dia.
MTG HOLE
2 [.08] deep
37 [1.46]
37 [1.46]
R6S-BS SPECIFICATIONS
ES-7781-AW Rev.1 Page 3/5
https://www.m-system.co.jp/
MODEL: R6S-BS
MOUNTING REQUIREMENTS unit: mm [inch]
■ MOUNTING DIRECTION
The unit must be mounted on a vertical panel. Mounting in any other angle will cause internal temperature to rise,
may shorten the product’s life expectation or deteriorate its performance.
Panel ceiling or wiring conduit
(height ≤ 50 mm or 2 in.)
R6S-BS
10
10
(.39)
(.39)
Panel bottom or wiring conduit
(height ≤ 50 mm or 2 in.)
■ SURFACE MOUNTING
• R6S-BS8A
+
• R6S-BS8A BS8P
27.4 [1.08]
50.6 [1.99] 24.4 [.96]
50.6 [1.99]
n–M4 *
3–M4
37 [1.46]
37 [1.46]
37 [1.46]
11.8 [.46]
+
• R6S-BS8B BS8P
• R6S-BS8B
69.6 [2.74]
24.4 [.96]
69.6 [2.74]
27.4 [1.08]
n–M4 *
3–M4
37 [1.46]
37 [1.46]
11.8 [.46]
37 [1.46]
*Number of bases x 3
R6S-BS SPECIFICATIONS
ES-7781-AW Rev.1 Page 4/5
https://www.m-system.co.jp/
MODEL: R6S-BS
Specifications are subject to change without notice.
R6S-BS SPECIFICATIONS
ES-7781-AW Rev.1 Page 5/5
https://www.m-system.co.jp/
相关型号：
©2020 ICPDF网 联系我们和版权申明