R6S-PF1-R/Q [MSYSTEM]

Remote I/O R6 Series POWER SUPPLY MODULE;


型号：	R6S-PF1-R/Q
厂家：	M-SYSTEM
描述：	Remote I/O R6 Series POWER SUPPLY MODULE
文件：	总3页 (文件大小：127K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R6S-PF1

Housing material: Flame-resistant resin (black)

Remote I/O R6 Series

Isolation: RUN contact output to internal bus or internal

power or power input to FG

POWER SUPPLY MODULE

(Tension clamp)

Power indicator LED: Green LED turns on when the power is

supplied.

Functions & Features

RUN indicator: Orange LED turns on in normal

communication with the host PLC.

• Provides internal power needed for I/O and network

modules from power input

■ RUN CONTACT OUTPUT

RUN contact: Terminals (2 – 3) turns ON and (4 – 3) OFF in

normal communication with the host PLC;

Terminals (2 – 3) turns OFF and (4 – 3) ON in abnormal

communication.

5.9 (.23)

Rated load: 250 V AC @ 0.5 A (cos ø = 1)

30 V DC @ 0.5 A (resistive load)

(3.70)

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA or 150 W

Minimum load: 1 V DC @ 1 mA

102

(4.02)

Mechanical life: 2 × 10 cycles (rate 300 cycles/min.) When

driving an inductive load, external contact protection and

noise quenching recommended.

mm (inch)

MODEL: R6S–PF1–R[1]

INSTALLATION

Power input

•DC: Operational voltage range 24 V DC ±10 % ripple 10 %

p-p max. Approx. 1 A with the maximum I/O extension

Operating temperature: -10 to +55°C (14 to 131°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Installation Base (model: R6S-BS)

Weight: 60 g (2.1 oz)

ORDERING INFORMATION

• Code number: R6S-PF1-R[1]

Specify a code from below for [1].

(e.g. R6S-PF1-R/Q)

• Specify the specification for option code /Q

(e.g. /C01)

POWER INPUT

DC Power

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 2000 V AC @ 1 minute (RUN contact

output to internal bus or internal power or power input to

FG)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

[1] OPTIONS

blank: none

STANDARDS & APPROVALS

EU conformity:

/Q: With options (specify the specification)

EMC Directive

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

/C02: Polyurethane coating

EN 61010-1,EN 61010-2-201

Measurement Category II (RUN contact output)

Pollution Degree 2

GENERAL SPECIFICATIONS

Connection

RUN contact output to internal bus or power

supply: Reinforced insulation (300 V)

RoHS Directive

Internal bus: Via the Installation Base (model: R6S-BS)

RUN contact output, power supply: Tension clamp

(Applicable wire size: 0.2 to 2.5 mm , stripped length 8 mm)

Internal power: Via the Installation Base (model: R6S-BS)

R6S-PF1 SPECIFICATIONS

ES-7781-BF Rev.2 Page 1/3

https://www.m-system.co.jp/

MODEL: R6S-PF1

CURRENT CONSUMPTION

The network module and I/O modules operate with 24V DC

power supply via the power supply module. The total

current consumption of the network module and I/O

modules is required to be not more than 1 A. If the total

current consumption exceeds 1 A, change the combination

of I/O modules or reduce the number of I/O modules.

R6xSV2 20mA

R6xSS2 20mA

R6xTS2 20mA

R6xTS2A 20mA

R6xRS2 20mA

R6xDS1 55mA

R6xYV2 25mA

R6xYS2 45mA

R6xDA4 10mA

R6xDC4A 20mA

R6xDC4B 20mA

R6NC1 110mA

R6NC3 110mA

R6ND1 40mA

R6NE1 75mA

R6NE2 75mA

R6NM1 50mA

R6NM2 50mA

R6NF1 100mA

R6NP1 100mA

EXTERNAL VIEW

(With the cover open)

Power LED

RUN LED

R6S-PF1 SPECIFICATIONS

ES-7781-BF Rev.2 Page 2/3

https://www.m-system.co.jp/

MODEL: R6S-PF1

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

SCREWDRIVER

INSERTION ANGLE

: approx. 35°

TEST PROBE

max. 2 (.08) dia.

WIRE INSERTION ANGLE

: approx.35°

102 (4.02)

5.9 (.23)

*Use a minus screwdriver: tip width 3.8 mm max., tip thickness 0.5 to 0.6 mm

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FG terminal to ground.

Caution: FG terminal is NOT a protective conductor terminal.

RUN LED

POWER LED

RUN CONTACT OUTPUT NO

COM

POWER INPUT

–

INTERNAL POWER

INTERNAL BUS

Specifications are subject to change without notice.

R6S-PF1 SPECIFICATIONS

ES-7781-BF Rev.2 Page 3/3

https://www.m-system.co.jp/

相关型号：