R7G4HEIP-6-DC16B [MSYSTEM]

Remote I/O R7G4H Series EtherNet/IP I/O MODULE;


型号：	R7G4HEIP-6-DC16B
厂家：	M-SYSTEM
描述：	Remote I/O R7G4H Series EtherNet/IP I/O MODULE
文件：	总5页 (文件大小：194K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R7G4HEIP-6-DC16B

/C02: Polyurethane coating

/C03: Rubber coating

Remote I/O R7G4H Series

EtherNet/IP I/O MODULE

(PNP transistor output, 16 points, screw terminal block)

RELATED PRODUCTS

• PC configurator software (model: R7CFG)

Functions & Features

• EDS file

• 16 points PNP transistor output module for EtherNet/IP

• Supports DLR (Device Level Ring) to form a ring topology

The EDS files and configurator software are downloadable at

M-System’s web site.

For connecting to PC, use commercially available Mini-B

type USB cable. (provided by user)

130 (5.12)

GENERAL SPECIFICATIONS

Connection

EtherNet/IP: RJ-45 Moduler Jack

Power input, output: M3 separable screw terminal (torque

0.5 N·m)

55 (2.17)

Solderless terminal: Refer to the drawing at the end of the

section.

55 (2.17)

(mm)

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

MODEL: R7G4HEIP-6-DC16B-R[1]

Applicable wire size: 0.25 to 1.65 mm

(AWG 22 to 16)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (gray)

Isolation: Output to EtherNet/IP or FE to power

Output at the loss of communication: Configurable via

R7CFG

ORDERING INFORMATION

• Code number: R7G4HEIP-6-DC16B-R[1]

Specify a code from below for [1].

(e.g. R7G4HEIP-6-DC16B-R/Q)

Status indicator LED: PWR, RUN

• Specify the specification for option code /Q

(e.g. /C01)

(Refer to the instruction manual)

Discrete output status indicator LED: Green LED turns on

with output ON

TERMINAL BLOCK

■Recommended solderless terminal

6: Screw terminal block for power supply

RJ-45 Modular jack for communication

Screw terminal block for I/O

3.3 (.13) max

mm (inch)

I/O TYPE

DC16B: PNP transistor output, 16 points

EtherNet/IP COMMUNICATION

Communication Standard: IEEE 802.3u

POWER INPUT

DC power

Transmission: 10BASE-T, 100BASE-TX

R: 24 V DC

Baud rate: 10/100 Mbps (Auto Negotiation function)

Protocol: EtherNet/IP

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

Max. number of socket connections: 3

Connection type: Exclusive owner / Listen only / Input only

Transmission media: 10BASE-T (STP, Category 5), 100BASE-

TX (STP, Category 5e)

[1] OPTIONS

blank: none

/Q: With options (specify the specification)

Network topology: Line, star and ring

Max. length of fieldbus segment: 100 meters

IP address: 192.168.0.250 (factory setting);

Only host address in IP address is configurable via rotary

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

R7G4HEIP-6-DC16B SPECIFICATIONS

ES-8004-C Rev.1 Page 1/5

http://www.m-system.co.jp/

MODEL: R7G4HEIP-6-DC16B

switches, the other items via PC configurator software

(model: R7CFG).

PC CONFIGURATOR

The following parameters can be set with using PC

Configurator Software (model: R7CFG)

Refer to the users manual for the R7CFG for detailed

operation of the software program.

■ CHANNEL BATCH SETTING

DLR supported

Port No.: 2222, 44818

I/O data size: One (1) word

Status indicator LEDs: MS, NS (Refer to the instruction

manual for details)

DEFAULT

PARAMETER

SETTING RANGE

SETTING

Hold

Output Hold / Clear Hold / Clear

OUTPUT SPECIFICATIONS

Common: Positive common (PNP) per 16 points

Maximum outputs applicable at once: No limit (at 24 V DC)

Rated load voltage: 24 V DC ±10 %, ripple 5 %p-p max.

Rated output current: 0.1 A per point, 1.6 A per common

Residual voltage: ≤ 1.2 V

■ EtherNet SETTING

DEFAULT

SETTING

PARAMETER

SETTING RANGE

IP Address

0.0.0.0 - 255.255.255.255

192.168.0.250

255.255.255.0

192.168.0.1

3.0 (sec.)

Subnet Mask

Default Gateway 0.0.0.0 - 255.255.255.255

Leakage current: ≤ 0.1 mA

Time Out

0.0 - 3276.7 (sec.)

DHCP / CONFIG

ON delay: ≤ 0.2 msec.

Use IP Address

CONFIG

OFF delay: ≤ 0.5 msec.

Overload current protection function: Limits the current

value when overcurrent is detected

Overheat protection function: Turns OFF the outputs when

overheat is detected

(When driving an inductive load, connect a diode in parallel

with the load.)

INSTALLATION

Current consumption

•DC: Approx. 50 mA

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail (35 mm rail)

Weight: 200 g (0.44 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(output to EtherNet/IP or FE to power)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

RoHS Directive

EN 50581

R7G4HEIP-6-DC16B SPECIFICATIONS

ES-8004-C Rev.1 Page 2/5

http://www.m-system.co.jp/

MODEL: R7G4HEIP-6-DC16B

EXTERNAL VIEW

IP Address Setting

Rotary SW

Discrete Output Status Indicator LED

PC Configurator Jack

Status Indicator LED

RJ-45 Modular Jack

SA1

×10

SA2

×1

LNK1

LNK2

PWR NS LNK2

MS LNK1

CNFG.

10 11 12 13 14 15 16 17 18

Power Supply Terminals

Output Terminals

TERMINAL ASSIGNMENTS

■OUTPUT TERMINAL ASSIGNMENT

V+

Y9 Y11 Y13 Y15

Y8 Y10 Y12 Y14

NO. ID

FUNCTION NO. ID

FUNCTION

V+ 24V DC (Out. Common)

Y1 Output 1

Y0 Output 0

Y2 Output 2

Y4 Output 4

Y6 Output 6

Y8 Output 8

Y10 Output 10

Y12 Output 12

Y14 Output 14

Y3 Output 3

Y5 Output 5

Y7 Output 7

Y9 Output 9

16 Y11 Output 11

17 Y13 Output 13

18 Y15 Output 15

■POWER SUPPLY TERMINAL ASSIGNMENT

4 5

NC NC

＋

24V 0V

NC NC FE

1. NC

2. NC

3. FE

4. NC

5. NC

6. +24V

7. 0V

Functional earth

Power supply (24V DC)

Power supply (0V)

R7G4HEIP-6-DC16B SPECIFICATIONS

ES-8004-C Rev.1 Page 3/5

http://www.m-system.co.jp/

MODEL: R7G4HEIP-6-DC16B

I/O DATA DESCRIPTIONS

■ DISCRETE OUTPUT

Output 0

Output 1

Output 2

Output 3

Output 7

Output 8

Output 15

0: OFF 1: ON

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm

154 (6.06)

140 (5.51)

55 (2.17)

[(4) 0.16]

130 (5.12)

10 11 12 13 14 15 16 17 18

DIN RAIL

35mm wide

2 – 4.3 dia. 4 deep.

7–M3 SCREW

18–M3 SCREW

TERMINALS for Output

TERMINALS for

POWER SUPPLY

MOUNTING REQUIREMENTS unit: mm (inch)

140 (5.51)

2 – M4

R7G4HEIP-6-DC16B SPECIFICATIONS

ES-8004-C Rev.1 Page 4/5

http://www.m-system.co.jp/

MODEL: R7G4HEIP-6-DC16B

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FE terminal to ground.

Caution: FE terminal is NOT a protective conductor terminal.

■ Output Circuit

Comm. Circuit

Output Circuit

RJ-45 Modular Jack

EtherNet/IP

V–

10 V+

Control

Circuit

RJ-45 Modular Jack

EtherNet/IP

24V DC

Control

Circuit

Y10

Y12

Y14

V+

18 Y15

V–

■ Output Connection Examples

−

V+ 10

V–

Y11

Y13

Y15

Y15 18

*1. The network cable can be connected to either one.

Specifications are subject to change without notice.

R7G4HEIP-6-DC16B SPECIFICATIONS

ES-8004-C Rev.1 Page 5/5

http://www.m-system.co.jp/

相关型号：