R7K4FE-6-DC16-R/Q [MSYSTEM]

Remote I/O R7K4F Series ETHERNET I/O MODULE;


型号：	R7K4FE-6-DC16-R/Q
厂家：	M-SYSTEM
描述：	Remote I/O R7K4F Series ETHERNET I/O MODULE 以太网：16GBASE-T
文件：	总7页 (文件大小：258K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: R7K4FE-6-DC16

Remote I/O R7K4F Series

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

ETHERNET I/O MODULE

(Modbus/TCP (Ethernet), reray contact output, 16 points,

screw terminal block)

/C02: Polyurethane coating

/C03: Rubber coating

Functions & Features

• 16 points relay contact output module for Modbus/TCP

(Ethernet)

RELATED PRODUCTS

• PC configurator software (model: R7CFG)

Downloadable at M-System’s web site.

A dedicated cable is required to connect the module to the

PC. Please refer to the internet software download site or

the users manual for the PC configurator for applicable

cable types.

210 (8.27)

GENERAL SPECIFICATIONS

Connection

Ethernet: RJ-45 Modular Jack

53.5 (2.11)

Power input, output: M3 separable screw terminal (torque

0.5 N·m)

47 (1.85)

mm (inch)

Solderless terminal: Refer to the drawing at the end of the

section.

Recommended manufacturer: Japan Solderless Terminal

MFG.Co.Ltd, Nichifu Co.,ltd

MODEL: R7K4FE-6-DC16-R[1]

Applicable wire size: 0.25 to 1.65 mm

(AWG 22 to 16)

ORDERING INFORMATION

• Code number: R7K4FE-6-DC16-R[1]

Specify a code from below for [1].

(e.g. R7K4FE-6-DC16-R/Q)

Screw terminal: Nickel-plated steel

Housing material: Flame-resistant resin (gray)

Isolation: Output 0 to output 1 to output 2 to output 3 to

output 4 to output 5 to output 6 to output 7 to output 8 to

output 9 to output 10 to output 11 to output 12 to output 13

to output 14 to output 15 to Ethernet or FE to power

Output at the loss of communication:

• Specify the specification for option code /Q

(e.g. /C01)

Output hold (*), Output clear

TERMINAL BLOCK

Selectable with the front DIP SW

6: Screw terminal block for power supply

RJ-45 Modular jack for communication

Screw terminal block for I/O

(*) factory default setting

Status indicator LEDs: PWR, ERR indicate the module’s

operating conditions. (Refer to the insruction manual)

Discrete output status indicator LED: Green LED; turns on

with output ON

I/O TYPE

DC16: Relay contact output, 16 points

■Recommended solderless terminal

3.3 (.13) max

POWER INPUT

DC power

R: 24 V DC

(Operational voltage range: ±10 %; ripple 10 %p-p max.)

mm (inch)

[1] OPTIONS

blank: none

ETHERNET COMMUNICATION

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Protocol: Modbus/TCP

/Q: With options (specify the specification)

R7K4FE-6-DC16 SPECIFICATIONS

ES-7778-A Rev.2 Page 1/7

https://www.m-system.co.jp/

MODEL: R7K4FE-6-DC16

Data: RTU (Binary)

Low Voltage Directive

Max. number of socket connections: 2

Transmission media: 10BASE-T (STP, Category 5) 100BASE-

TX (STP, Category 5e)

EN 61010-1, EN 61010-2-201

Measurement Category II (output)

Pollution Degree 2

Max. length of fieldbus segment: 100 meters

IP address: 192.168.0.1 (factory setting);

Selectable with PC Configurator Software (model: R7CFG)

Port No.: 502

Output to power: Basic insulation (250 V)

RoHS Directive

PC CONFIGURATOR

Ethernet indicator LED: Link, Link100, COL

(Refer to the insruction manual)

The following parameters can be set with using PC

Configurator Software (model: R7CFG)

Refer to the users manual for the R7CFG for detailed

operation of the software program.

OUTPUT SPECIFICATIONS

Common: 1 common per 1 point (16 points)

DEFAULT

PARAMETER

IP Adress

SETTING RANGE

Maximum load current: 2.0 A per point

SETTING

Maximum outputs applicable at once: No limit (at 24 V DC)

Output supply voltage/current: 24 V DC ±10 %/ ≥ 120 mA

Rated load: 250 V AC @ 2A, 30 V DC @ 2A

0.0.0.0ー

192.168.0.1

255.255.255.255

0.0.0.0ー

Subnet Mask

255.255.255.0

255.255.255.255

Maximum switching voltage: 250 V AC, 30 V DC

Maximum switching power: 500 VA (AC), 60 W (DC)

Minimum applicable load: 5 V DC @ 1 mA

Linger Time

Time Out

0ー3276.7（sec.） 180.0（sec.）

0ー3276.7（sec.） 3.0（sec.）

Mechanical life: 2 × 10 cycles (300 cycles per min.)

When driving an inductive load, external contact protection

and noise quenching recommended.

ON delay time: ≤ 10 msec.

OFF delay time: ≤ 10 msec.

INSTALLATION

Current consumption

•DC: Approx. 130 mA (contact output load charge is not

included)

Operating temperature: -10 to +55°C (14 to 131°F)

Storage temperature: -20 to +65°C (-4 to +149°F)

Operating humidity: 30 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: Surface or DIN rail (35 mm rail)

Weight: 330 g (0.73 lb)

PERFORMANCE

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(output 0 to output 1 to output 2 to output 3 to output 4 to

output 5 to output 6 to output 7 to output 8 to output 9 to

output 10 to output 11 to output 12 to output 13 to output

14 to output 15 to Ethernet or FE to power)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

R7K4FE-6-DC16 SPECIFICATIONS

ES-7778-A Rev.2 Page 2/7

https://www.m-system.co.jp/

MODEL: R7K4FE-6-DC16

EXTERNAL VIEW

Unused

Operating Mode Setting DIP SW (SW1)

Discrete Output Status Indicator LED

Status Indicator LED

RJ-45 Connector

PC Configurator Jack

PWR LINK COL

10 11 12 13 14 15

RUN LINK

100

10 11 12 13 14 15 16 17 18

28 29 30 31 32 33 34 35 36

19 20 21 22 23 24 25 26

Power Supply Terminals

Output Terminals

TERMINAL ASSIGNMENTS

■OUTPUT TERMINAL ASSIGNMENT

＋24V Y8

20 21

＋24V Y0

Y9 Y10 Y11 Y12 Y13 Y14 Y15

22 23 24 25 26 27

0V COM0 COM1 COM2 COM3 COM4 COM5 COM6 COM7

0V COM8 COM9 COM10 COM11 COM12 COM13 COM14 COM15

NO.

FUNCTION

0 V

NO.

FUNCTION

NO.

FUNCTION

0 V

NO.

FUNCTION

+24V 24 V DC

COM0 Common 0

COM1 Common 1

COM2 Common 2

COM3 Common 3

COM4 Common 4

COM5 Common 5

COM6 Common 6

COM7 Common 7

Output 0

Output 1

Output 2

Output 3

Output 4

Output 5

Output 6

Output 7

COM8 Common 8

COM9 Common 9

Output 8

Output 9

Output 10

Output 11

Output 12

Output 13

Output 14

Output 15

22 COM10 Common 10

23 COM11 Common 11

24 COM12 Common 12

25 COM13 Common 13

26 COM14 Common 14

27 COM15 Common 15

Y10

Y11

Y12

Y13

Y14

Y15

4 5

NC NC

＋

24V 0V

NC NC FE

1. NC

2. NC

3. FE

4. NC

5. NC

6. +24V

7. 0V

Functional earth

Power supply (24V DC)

Power supply (0V)

R7K4FE-6-DC16 SPECIFICATIONS

ES-7778-A Rev.2 Page 3/7

https://www.m-system.co.jp/

MODEL: R7K4FE-6-DC16

MODBUS FUNCTION CODES & SUPPORTED CODES

■ Data and Control Functions

CODE

NAME

Read Coil Status

Digital output from the slave（read／write）

Read Input Status

Read Holding Registers

Read Input Registers

Force Single Coil

Preset Single Register

Read Exception Status

Diagnostics

Status of digital inputs to the slave（read only）

General purpose register within the slave（read／write）

Collected data from the ꢀeld by the slave（read only）

Digital output from the slave（read／write）

General purpose register within the slave（read／write）

Program 484

Poll 484

Fetch Comm. Event Counter

Fetch Comm. Event Log

Fetch a status word and an event counter

A status word, an event counter, a message count and

ꢀeld of event bytes

Program Controller

Poll Controller

Force Multiple Coils

Preset Multiple Registers

Report Slave ID

Digital output from the slave（read／write）

General purpose register within the slave（read／write）

Slave type／‘RUN’status

Program 884／M84

Reset Comm. Link

Read General Reference

Write General Reference

Mask Write 4X Register

Read／Write 4X Registers

Read FIFO Queue

Exception Code

■

CODE

NAME

Illegal Function

Function code is not allowable for the slave

Address is not available within the slave

Data is not valid for the function

Illegal Data Address

Illegal Data Value

Slave Device Failure

Acknowledge

Slave Device Busy

Negative Acknowledge

Memory Parity Error

Diagnostic Subfunctions

■

CODE NAME

Return Query Data

Loop back test

Restart Comm. Option

Return Diagnostic Register

Change Input Delimiter Character

Force Slave to Listen Only Mode

MODBUS I/O ASSIGNMENT

ADDRESS

1 – 16

DATA TYPE

DATA

Coil (0X)

Digital Output

R7K4FE-6-DC16 SPECIFICATIONS

ES-7778-A Rev.2 Page 4/7

https://www.m-system.co.jp/

MODEL: R7K4FE-6-DC16

I/O DATA DESCRIPTIONS

■ DISCRETE OUTPUT

Output 0

Output 1

Output 2

Output 3

Output 7

Output 8

Output 15

0: OFF 1: ON

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm [inch]

235 (9.25)

220 (8.66)

210 (8.27)

47 (1.85)

45 (1.77)

DIN RAIL

35mm wide

10 11 12 13 14 15 16 17 18

28 29 30 31 32 33 34 35 36

19 20 21 22 23 24 25 26

[4 (.16)]

4.3 dia.

4 deep

(2 1.17 dia.

.16 deep)

7−M3 SCREW

TERMINALS FOR POWER

36−M3 SCREW

TERMINALS FOR OUTPUT

MOUNTING REQUIREMENTS unit: mm [inch]

220 (8.66)

2–M4

R7K4FE-6-DC16 SPECIFICATIONS

ES-7778-A Rev.2 Page 5/7

https://www.m-system.co.jp/

MODEL: R7K4FE-6-DC16

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FE terminal to ground.

Caution: FE terminal is NOT a protective conductor terminal.

Comm. Circuit

RJ-45 Modular Jack

Modbus/TCP

COM0

COM1

Control

Circuit

COM2

COM3

COM4

COM5

24V DC

COM6

COM7

Output

Circuit

COM8

30 Y9

21 COM9

31 Y10

22 COM10

32 Y11

23 COM11

33 Y12

24 COM12

34 Y13

25 COM13

35 Y14

26 COM14

36 Y15

27 COM15

10 +24V

28 +24V

24V DC

19 0V

R7K4FE-6-DC16 SPECIFICATIONS

ES-7778-A Rev.2 Page 6/7

https://www.m-system.co.jp/

MODEL: R7K4FE-6-DC16

Specifications are subject to change without notice.

R7K4FE-6-DC16 SPECIFICATIONS

ES-7778-A Rev.2 Page 7/7

https://www.m-system.co.jp/

相关型号：