R7L-DC16A-AR/Q [MSYSTEM]
Remote I/O R7 Series LonWorks I/O MODULE;
| 型号： | R7L-DC16A-AR/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R7 Series LonWorks I/O MODULE |
| 文件： | 总26页 (文件大小：608K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R7L
24 V DC±10 %, ripple 10 %p-p max.)
Remote I/O R7 Series
LonWorks I/O MODULE
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
EXTENSION MODULE: R7L–[1][2]
[1] I/O TYPE
EA8: Discrete input, 8 points
EA16: Discrete input, 16 points
EC8A: NPN transistor output, 8 points
EC16A: NPN transistor output, 16 points
EC8B: PNP transistor output, 8 points
EC16B: PNP transistor output, 16 points
ORDERING INFORMATION
• Basic module: R7L-[1]-AR[2]
Specify a code from below for each [1] and [2].
(e.g. R7L-DC16A-AR/Q)
• Specify the specification for option code /Q
(e.g. /C01)
[2] OPTIONS
blank: none
/Q: Option other than the above (specify the specification)
• Extension module: R7L-[1][2]
Specify a code from below for each [1] and [2].
(e.g. R7L-EC16A/Q)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
• Specify the specification for option code /Q
(e.g. /C01)
/C02: Polyurethane coating
/C03: Rubber coating
MODEL: R7L-[1]-AR[2]
FUNCTIONS & FEATURES
The R7L interfaces analog and discrete I/O signals with a PC
[1] I/O TYPE
DA16: Discrete input, 16 points
via LonWorks.
DC16A: NPN transistor output, 16 points
(One-shot pulse output is available.)
DC16B: PNP transistor output, 16 points
(One-shot pulse output is available.)
DAC16: PNP discrete input, 8 points
NPN transistor output, 8 points
A ‘basic’ module can be attached with an ‘extension’
module. By combining two modules, single station can
handle mixed analog and discrete signals, 32-point discrete
inputs, 32-point discrete outputs, 16-point discrete I/Os and
other combinations of signals.
Single module can handle multiple Functional Blocks, not
only the discrete I/O, but also the pulse count input, one-
shot output, scaling, alarm output, and so forth.
Input sensor type (thermocouple, RTD) and range can be
selected using the LNS Plug-in Software (model: R7LPLG).
(One-shot pulse output is available.)
SV4: DC voltage/current input (10 V/20 mA), 4 points
TS4: Thermocouple input, 4 points
RS4: RTD input, 4 points
YV2: DC voltage output, 2 points
YS2: DC current output, 2 points
RR8: Remote control relay control output, 8 points
R7L-DA16 and -DAC16 can accept totalized pulse input with
no need of input extension module. Other modules need
extension module.
RELATED PRODUCTS
• XIF File (Device Interface File)
XIF file is used to define a LonWorks device when
programmed on LonMaker.
• LNS Plug-in Software (model: R7LPLG)
XIF files and LNS Plug-in Software are downloadable at M-
System's web site.
POWER INPUT
Universal
AR: 24 V AC/24 V DC
(Operational voltage range: 24 V AC±10 %,50/60Hz/
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 1/26
http://www.m-system.co.jp/
MODEL: R7L
■ Recommended solderless terminal
LonWorks SYSTEM REQUIREMENTS
• LonMaker Turbo Edition Ver.3.2 or higher + LonMaker
Turbo Service Pack 4.0 or higher
3.3 (.13) max
• LonMark Resource File Ver.13 or higher
mm (inch)
GENERAL SPECIFICATIONS
■ Common Specifications
■ I/O Status Indicator
• Discrete I/O
Power input:
Discrete I/O modules have LED indicators showing I/O signal
status.
24 V AC ±10 % (50 / 60 Hz)
24 V DC ±10 %; ripple 10 %p-p max.
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @1 minute
(between isolated circuits)
• Analog I/O
Analog I/O modules have LED indicators showing network
variable status assigned to fbLED.
(Refer to the instruction manual for details)
■ Service Switch
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Storage temperature: -20 to +65°C (-4 to +149°F)
Mounting: DIN rail (35 mm wide)
Used to identify the node in LonWorks network
configuration.
■ Reset Switch
Used to reset the Neuron Chip. Press the switch behind the
front cover to reset.
Connection: M3 separable screw terminals
(torque 0.5 N·m)
Control functions are halted while completing resetting and
restarting. Confirm no danger before conducting resetting.
Screw terminal material: Nickel-plated steel
Solderless terminal: Refer to the drawing at the end of the
section.
Recommended manufacturer: Japan Solderless Terminal
MFG.Co.Ltd, Nichifu Co.,ltd
LonWorks COMMUNICATION
Neuron Chip: FT3120 (NeuronID printed in numeric and bar
code [peel-off code 39 format] under the specification
marking on the product; two sticker labels attached)
Transceiver: FT-X1 (equivalent to FTT10A)
Transmission speed: 78 kbps
Applicable wire size: 0.25 to 1.65 mm (AWG22 to 16)
2
Housing material: Flame-resistant resin (gray)
Status indicator: PWR, ONLINE, ERR, TX/RX, SVCE
(Refer to the instruction manual for details)
■ Current Consumption & Weight
Twisted-pair cable
Current consumption at 24 V AC / 24 V DC
R7L-DA16: 70 mA / 40 mA; 200 g (7.1 oz)
R7L-DC16A: 80 mA / 50 mA; 200 g (7.1 oz)
R7L-DC16B: 80 mA / 50 mA; 200 g (7.1 oz)
R7L-DAC16: 75 mA / 45 mA; 200 g (7.1 oz)
R7L-SV4: 80 mA / 50 mA; 200 g (7.1 oz)
R7L-TS4: 85 mA / 50 mA; 200 g (7.1 oz)
R7L-RS4: 85 mA / 50 mA; 200 g (7.1 oz)
R7L-YV2: 110 mA / 70 mA; 200 g (7.1 oz)
R7L-YS2: 180 mA / 110 mA; 200 g (7.1 oz)
R7L-RR8: 75 mA / 50 mA; 200 g (7.1 oz)
R7L-EA8: 15 mA / 10 mA; 90 g (3.2 oz)
R7L-EA16: 30 mA / 20 mA; 150 g (5.3 oz)
R7L-EC8A: 15 mA / 10 mA; 90 g (3.2 oz)
R7L-EC16A: 30 mA 20 mA; 150 g (5.3 oz)
R7L-EC8B: 15 mA / 10 mA; 90 g (3.2 oz)
R7L-EC16B: 30 mA / 20 mA; 150 g (5.3 oz)
Distance, free topology: 500 meters
Max. 64 nodes/channel
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 2/26
http://www.m-system.co.jp/
MODEL: R7L
EXTERNAL VIEW
■ BASIC MODULE
Service SW
Status Indicator LED
Reset SW
Factory Configuration Port
Indicator LED
PWR
ERR
SVCE
0 1 2 3 4 5 6 7 8 9 A B C D E F
TX/RX
ONLINE
4
5
6
7
10 11 12 13 14 15 16 17 18
1
2
3
1
2
3
4
5
6
7
8
9
LONWORKS, Power Supply
Terminals
1
*
I/O Terminals
*1. 10 screw terminals for analog output modules.
■ EXTENSION MODULE
• DISCRETE, 8 POINTS
Discrete I/O Status Indicator LED
0
1
2
3
4
5
6
7
6
7
8
9
10
1
2
3
4
5
I/O Terminals
• DISCRETE, 16 POINTS
Discrete I/O Status Indicator LED
0
1 2 3 4 5 6 7 8 9 A B C D E F
10 11 12 13 14 15 16 17 18
1
2
3
4
5
6
7
8
9
I/O Terminals
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 3/26
http://www.m-system.co.jp/
MODEL: R7L
CONNECTION DIAGRAMS
■ POWER SUPPLY, LONWORKS TERMINAL ASSIGNMENT
4
5
6
7
NET1 NET2 U (+) V (–)
1
2
3
NET1 NET2 FG
NO.
1
ID
FUNCTION, NOTES
LONWORKS communication 1
LONWORKS communication 2
FG
NET1
NET2
FG
2
3
4
NET1
NET2
U (+)
V (–)
LONWORKS communication 1
LONWORKS communication 2
Power input
5
6
7
Power input
Note: LONWORKS wiring must be paired between NET1 terminals
and/or NET2 terminals.
■ HOST PC CONNECTION
HOST PC
R7L
R7L
LONWORKS
LONWORKS
LONWORKS
Terminator
DATA CONVERSION
■ 0 – 100% DATA CONVERSION
Analog input data is converted into digital representations of 0 – 100% proportional to each scaled range. The converted %
values are expressed in signed 16 bits.
Overrange input is possible from -15 to +115% of the nominal range. When the signal exceeds the limit, the data is xed at
-15% or +115% respectively.
• Input Range 0 – 5V DC
Input Value
Input %
Converted Data, Decimal
≤ -0.75V
0V
5V
-15%
0%
100%
115%
-15.00
0.00
100.00
115.00
≥ 5.75V
115.00
100.00
-0.75
0
-15.00
5.0
5.75
(V)
Analog output is converted in the reverse order of the input data. The output range 0 – 5V DC is expressed as 100.00 at
5.0V (100%) and 0.00 at 0V (0%).
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 4/26
http://www.m-system.co.jp/
MODEL: R7L
■ TEMPERATURE DATA CONVERSION
Temperature data (thermocouple and RTD) are represented in engineering unit value, °C, expressed in signed 16 bits.
• Input Type K Thermocouple
Input Value
Converted Data, Decimal
≤ -272°C
-150°C
1370°C
-272.0
-150.0
1370.0
1472.0
≥ 1472°C
1472.0
1370.0
-272 -150
1370
1472
(°C)
-150.0
-272.0
EXTENSION MODULE
A ‘basic’ module can be attached with one ‘extension’ module. The extension module is powered from the basic module.
By combining two modules, single station can handle mixed analog and discrete signals.
Settings of the extension module are handled by Functional Blocks of the basic module. Refer to the instruction manual of the
basic module for more information.
■ OUTPUT AT THE LOSS OF COMMUNICATION
The extension module is set to ‘Hold Output’ by factory default setting. The LNS Plug-in Software (model: R7LPLG) is used to
change the setting to ‘Reset Output.’
CONNECTING THE EXTENSION MODULE
1) Remove the extension connector cover located at the side of the basic module.
2) Connect the extension module.
3) Mount the combined module on a DIN rail.
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 5/26
http://www.m-system.co.jp/
MODEL: R7L
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
■ BASIC MODULE
115 (4.53)
17 (.66)
54 (2.13)
DIN RAIL
35mm wide
4
5
6
7
10 11 12 13 14 15 16 17 18
1
2
3
1
2
3
4
5
6
7
8
9
30 (1.18)
[5 (.20)]
• R7L-TS4
6 (.24)
6 (.24)
17 (.66)
54 (2.13)
7–M3 SCREW
TERMINALS
18–M3 SCREW
TERMINALS for I/O
for LONWORKS, POWER
DIN RAIL
35mm wide
30 (1.18)
[5 (.20)]
■ ANALOG OUTPUT
115 (4.53)
17 (.66)
54 (2.13)
DIN RAIL
35mm wide
4
5
6
7
6
7
8
9
10
1
2
3
1
2
3
4
5
30 (1.18)
[5 (.20)]
6 (.24)
6 (.24)
7–M3 SCREW
TERMINALS
for LONWORKS, POWER
10–M3 SCREW
TERMINALS
for OUTPUT
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 6/26
http://www.m-system.co.jp/
MODEL: R7L
■ EXTENSION MODULE, 8 POINTS
11.5
(.45)
65 (2.56)
17 (.66)
54 (2.13)
DIN RAIL
35mm wide
6
7
8
9
10
1
2
3
4
5
30 (1.18)
[5 (.20)]
6 (.24)
10–M3 SCREW
TERMINALS for I/O
■ EXTENSION MODULE, 16 POINTS
17 (.66)
54 (2.13)
11.5
(.45)
94 (3.70)
DIN RAIL
35mm wide
10 11 12 13 14 15 16 17 18
1
2
3
4
5
6
7
8
9
30 (1.18)
[5 (.20)]
6 (.24)
18–M3 SCREW
TERMINALS for I/O
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 7/26
http://www.m-system.co.jp/
MODEL: R7L
DISCRETE INPUT MODULE, 16 points
MODEL: R7L-DA16
CIRCUIT DIAGRAM
Input Circuit
LONWORKS
1
2
4
1
5
2
3
6
7
COM
X0
X2
X4
X6
X8
XA
XC
XE
X1
X3
X5
X7
X9
XB
XD
XF
NET1
NET1
NET2
NET2
FG
Comm.
Circuit
LONWORKS
3
SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per
4
16 points
5
Number of I/O: Input, 16 points
6
U (+)
V (–)
Maximum inputs applicable at once: No limit (at 24 V DC)
Input status indicator: LED turns ON with contact ON
Isolation: Input to LonWorks or FG or power
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
7
8
Control
Circuit
9
11
12
13
14
15
16
17
18
10
Maximum input frequency: 10 Hz (input terminal)
1 Hz (Network Variable)
Minimum input pulse requirements: 50 ms (input terminal)
500 ms (Network Variable)
Accumulated pulse count: 0 – 999 999 999
(Maximum count depends upon Network Variable types)
Overflow: Reset to 0 and restart counting
■ Input Circuit
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (totalize pulse count on 8 channels)
• fbDI (discrete input, RS-flip flop)
• fbCMP (compare)
1
2
COM
X0
Control
Circuit
• fbEN (encoder)
• fbTMR (timer)
18
XF
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
■ Input Connection Examples
PNP Connection
NPN Connection
TERMINAL ASSIGNMENTS
+
–
–
+
1
2
1
2
COM
X0
COM
X0
10
NC
11
X1
12
X3
13
X5
14
X7
15
X9
16
XB
17
XD
18
XF
1
2
3
4
5
6
7
8
9
COM
X0
X2
X4
X6
X8
XA
XC
XE
NO. ID
FUNCTION
NO. ID
FUNCTION
18
18
XF
XF
1
2
3
4
5
6
7
8
9
COM Common
X0 Input 0
X2 Input 2
X4 Input 4
X6 Input 6
X8 Input 8
XA Input 10
XC Input 12
XE Input 14
10
11
12
13
14
15
16
17
18
NC No Connection
X1 Input 1
X3 Input 3
X5 Input 5
X7 Input 7
X9 Input 9
XB Input 11
XD Input 13
XF Input 15
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 8/26
http://www.m-system.co.jp/
MODEL: R7L
NPN TRANSISTOR OUTPUT MODULE, 16 points
CIRCUIT DIAGRAM
Output Circuit
LONWORKS
MODEL: R7L-DC16A
4
1
5
2
3
6
7
10
2
NET1
NET1
NET2
NET2
+24V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
Comm.
Circuit
LONWORKS
3
SPECIFICATIONS
Common: Negative common (NPN) per 16 points
4
Number of I/O: Output, 16 points
5
FG
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to LonWorks or FG or power
Rated load voltage: 24 V DC ±10 %
U (+)
6
7
V (–)
8
Control
Circuit
9
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
11
12
13
14
15
16
17
18
1
Leakage current: ≤ 0.1 mA
(When driving an inductive load, connect a diode in parallel
with the load.)
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (count)
• fbDO (discrete output, one-shot output)
• fbCMP (compare)
■ Output Circuit
• fbEN (encoder)
10
+24V
• fbTMR (timer)
2
Y0
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
Control
Circuit
TERMINAL ASSIGNMENTS
18
YF
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
1
0V
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
0 V 0 V (common)
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
10 +24 V 24 V DC
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
■ Output Connection Example
10
1
+24V
0V
–
+
2
Y0
18
YF
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 9/26
http://www.m-system.co.jp/
MODEL: R7L
PNP TRANSISTOR OUTPUT MODULE, 16 points
CIRCUIT DIAGRAM
Output Circuit
LONWORKS
MODEL: R7L-DC16B
4
10
NET1
+24V
1
5
2
3
6
7
2
3
NET1
NET2
NET2
FG
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
LONWORKS
Comm.
Circuit
SPECIFICATIONS
Common: Positive common (PNP) per 16 points
4
5
Number of I/O: Output, 16 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to LonWorks or FG or power
Rated load voltage: 24 V DC ±10 %
U (+)
V (–)
6
7
8
Control
Circuit
9
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
11
12
13
14
15
16
17
18
1
Leakage current: ≤ 0.1 mA
(When driving an inductive load, connect a diode in parallel
with the load.)
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (count)
• fbDO (discrete output, one-shot output)
• fbCMP (compare)
■ Output Circuit
10
2
+24V
Y0
• fbEN (encoder)
• fbTMR (timer)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
Control
Circuit
TERMINAL ASSIGNMENTS
18
YF
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
1
0V
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
0 V 0 V
10 +24 V 24 V DC (common)
■ Output Connection Example
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
+
–
10
1
+24V
0V
2
Y0
18
YF
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 10/26
http://www.m-system.co.jp/
MODEL: R7L
PNP DISCRETE INPUT &
TERMINAL ASSIGNMENTS
NPN TRANSISTOR OUTPUT MODULE, 8 points each
10
11
12
X3
13
X5
14
X7
15
Y1
16
Y3
17
Y5
18
Y7
＋24V X1
1
2
3
4
5
6
7
8
9
COM
X
0
X2
X4
X6
Y0
Y2
Y4
Y6
MODEL: R7L-DAC16
NO.
1
2
3
4
5
6
7
8
ID
FUNCTION
Common
Input 0
Input 2
Input 4
Input 6
Output 0
Output 2
Output 4
Output 6
NO.
10
11
12
13
14
15
16
17
18
ID
FUNCTION
24V DC
Input 1
Input 3
Input 5
Input 7
Output 1
Output 3
Output 5
Output 7
COM
X0
X2
X4
X6
Y0
Y2
Y4
Y6
+24V
X1
X3
X5
X7
Y1
Y3
Y5
Y7
SPECIFICATIONS
■ COMMON SPECIFICATIONS
Common: Negative common per 16 points
Number of I/O: Input, 8 points; Output, 8 points
Maximum I/O applicable at once: No limit (at 24 V DC)
I/O status indicator: LED turns ON with contact ON
Isolation: Input or output to LonWorks or FG or power
■ INPUT
9
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
Maximum input frequency: 10 Hz (input terminal)
1 Hz (Network Variable)
Minimum input pulse requirements: 50 ms (input terminal)
500 ms (Network Variable)
Accumulated pulse count: 0 – 999 999 999
(Maximum count depends upon Network Variable types)
Overflow: Reset to 0 and restart counting
■ OUTPUT
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
Leakage current: ≤ 0.1 mA
(When driving an inductive load, connect a diode in parallel
with the load.)
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (totalize pulse count on 8 channels)
• fbDO (discrete output, one-shot output)
• fbDI (discrete input, RS-flip flop)
• fbCMP (compare)
• fbEN (encoder)
• fbTMR (timer)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 11/26
http://www.m-system.co.jp/
MODEL: R7L
CIRCUIT DIAGRAM
Input Circuit
LONWORKS
4
1
5
2
3
6
7
1
2
NET1
NET1
NET2
NET2
COM
X0
Comm.
Circuit
LONWORKS
11
3
X1
X2
12
4
FG
X3
U (+)
X4
V (–)
13
5
X5
X6
Control
Circuit
14
6
X7
Y0
15
7
Y1
Y2
16
8
Y3
Y4
17
9
Y5
Y6
18
10
Y7
+24V
Output Circuit
■ Input Circuit
1
2
COM1
X0
Control
Circuit
14
X7
■ Output Circuit
10
6
+24V
Y0
Control
Circuit
18
1
Y7
COM
■ I/O Connection Example
10
1
+24V
COM
X0
−
+
2
6
Y0
YF
18
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 12/26
http://www.m-system.co.jp/
MODEL: R7L
DC VOLTAGE/CURRENT INPUT MODULE, 4 points
TERMINAL ASSIGNMENTS
10
VL0
11
I0
12
VL1
13
I1
14
NC
15
VL2
16
I2
17
VL3
18
I3
MODEL: R7L-SV4
1
2
3
4
5
6
7
8
9
VH0 COM0 VH1 COM1
NC
VH2 COM2 VH3 COM3
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to power
NO. ID
FUNCTION
VH0 Wide span volt. 0 10 VL0 Narrow span volt. 0
COM0 Common 0 11 I0 Current range 0
VH1 Wide span volt. 1 12 VL1 Narrow span volt. 1
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
input or LonWorks or FG
Converted data range: 0 – 100.00 of the input range
Linearization: Standard
COM1 Common 1
NC No connection
13
14
I1 Current range 1
NC No connection
Input range
VH2 Wide span volt. 2 15 VL2 Narrow span volt. 2
COM2 Common 2 16 I2 Current range 2
VH3 Wide span volt. 3 17 VL3 Narrow span volt. 3
COM3 Common 3 18 I3 Current range 3
Wide span voltage: -10 – +10 V DC(*), -5 – +5 V DC,
0 – 10 V DC, 0 – 5 V DC, 1 – 5 V DC;
(*) Factory setting
Narrow span voltage: -1 – +1 V DC, 0 – 1 V DC,
-0.5 – +0.5 V DC, 0 – 0.5 V DC;
Current range: -20 – +20 mA DC, 0 – 20 mA DC,
4 – 20 mA DC
CIRCUIT DIAGRAM
(Input range is selectable using the LNS Plug-in Software
(model: R7LPLG))
Input Circuit
INPUT 0
LONWORKS
1
10
11
2
4
1
5
2
3
6
7
VH0
NET1
NET1
NET2
NET2
FG
Cold junction compensation: CJC sensor attached to the
input terminals
VL0
Comm.
Circuit
LONWORKS
I0
• Input resistance
COM0
Input Circuit
Input Circuit
Input Circuit
INPUT 1
VH1
Wide span voltage: ≥ 1 MΩ
3
12
13
4
Narrow span voltage: ≥ 100 kΩ
Current range: 70 Ω
U (+)
V (–)
VL1
I1
Conversion rate / conversion accuracy: 80 msec. / ±0.1 %
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
Control
Circuit
COM1
INPUT 2
VH2
6
15
16
7
VL2
I2
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (count)
COM2
INPUT 3
VH3
8
17
18
9
VL3
I3
• fbSV (DC voltage/current input, input range)
• fbARM (alarm output)
COM3
5
• fbCV (scaling)
14
• fbLED (LED function)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
■ Input Connection Examples
+
VHn
VLn
In
VHn
VLn
In
VHn
+
+
–
VLn
In
WIDE SPAN
VOLTAGE
NARROW SPAN
VOLTAGE
CURRENT
RANGE
–
COMn
–
COMn
COMn
Be sure to close across VLn and In terminals for a current input.
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 13/26
http://www.m-system.co.jp/
MODEL: R7L
THERMOCOUPLE INPUT MODULE, 4 points
MODEL: R7L-TS4
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (count)
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to power
• fbTS (thermocouple input & setting)
• fbARM (alarm output)
input or LonWorks or FG
• fbCV (scaling)
Converted data range: Engineering unit value (°C)
Linearization: Standard
• fbLED (LED function)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
Thermocouple: K(*), E, J, T, B, R, S, C, N, U, L, P, PR
(*) Factory setting
(T/C type is selectable using the LNS Plug-in Software
(model: R7LPLG))
TERMINAL ASSIGNMENTS
Cold junction compensation: CJC sensor attached to the
input terminals
10
11
12
13
14
NC
15
16
17
18
+IN0 –IN0 +IN1 –IN1
+IN2 –IN2 +IN3 –IN3
1
2
3
4
5
6
7
8
9
Input resistance: ≥ 30 kΩ
+CJ0 –CJ0 +CJ1 –CJ1
NC
+CJ2 –CJ2 +CJ3 –CJ3
Burnout sensing: ≤ 0.1 μA
Conversion accuracy: ±1°C (±1.8°F);
±2.0°C (±3.6°F) for B, R, S, C, PR
Conversion rate: 250 msec.
NO. ID
FUNCTION
+CJ0 CJC + 0
–CJ0 CJC – 0
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
10 +IN0 T/C + 0
11 –IN0 T/C – 0
12 +IN1 T/C + 1
13 –IN1 T/C – 1
+CJ1 CJC + 1
–CJ1 CJC – 1
NC No connection
+CJ2 CJC + 2
–CJ2 CJC – 2
+CJ3 CJC + 3
–CJ3 CJC – 3
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) of
max. span
14
NC No connection
CJC error: ±1.0°C at 25°C ±10°C
(±1.8°F at 77°F ±18°F)
15 +IN2 T/C + 2
16 –IN2 T/C – 2
17 +IN3 T/C + 3
18 –IN3 T/C – 3
±1.5°C (±2.7°F) for R, S, PR
BURNOUT
T/C
CONFORMANCE
RANGE (°C)
INDICATION (°C)
Upscale
+1472
+1120
+1300
+ 500
1920
Downscale
-272
-272
-260
-272
24
K (CA)
-150 to +1370
-170 to +1000
-180 to +1200
-170 to + 400
1000 to 1760
380 to 1760
400 to 1760
100 to 2315
-130 to +1300
-200 to +600
-200 to +900
0 to 1395
E (CRC)
J (IC)
T (CC)
B (RH)
R
-100
-100
-52
+1860
+1860
+2416
+1400
+ 700
+1000
+1496
+1860
S
C (WRe 5-26)
N
-272
-252
-252
-52
U
L
P (Platinel II)
(PR)
-52
300 to 1760
BURNOUT
INDICATION (°F)
CONFORMANCE
RANGE (°F)
T/C
Upscale
+2682
+2048
+2372
+932
Downscale
-458
-458
-436
-458
75
K (CA)
-238 to +2498
-274 to +1832
-292 to +2192
-274 to +752
1832 to 3200
716 to 3200
752 to 3200
212 to 4199
-202 to +2372
-328 to +1112
-328 to +1652
32 to 2543
E (CRC)
J (IC)
T (CC)
B (RH)
3488
R
-148
-148
-62
+3380
+3380
+4381
+2552
+1292
+1832
+2725
+3380
S
C (WRe 5-26)
N
-458
-422
-422
-62
U
L
P (Platinel II)
(PR)
-62
572 to 3200
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 14/26
http://www.m-system.co.jp/
MODEL: R7L
CIRCUIT DIAGRAM
Input Circuit
Input Circuit
Input Circuit
Input Circuit
INPUT 0
+IN0
LONWORKS
LONWORKS
10
11
1
4
1
5
2
3
6
7
NET1
NET1
NET2
NET2
–IN0
+CJ0
–CJ0
Comm.
Circuit
2
INPUT 1
+IN1
FG
12
13
3
U (+)
–IN1
+CJ1
–CJ1
V (–)
Control
Circuit
4
INPUT 2
+IN2
15
16
6
–IN2
+CJ2
–CJ2
7
INPUT 3
+IN3
17
18
8
–IN3
+CJ3
–CJ3
9
5
14
■ Input Connection Example
T/C
+
–
+INn
–INn
+CJn
–CJn
CJC
SENSOR
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 15/26
http://www.m-system.co.jp/
MODEL: R7L
RTD INPUT MODULE, 4 points
MODEL: R7L-RS4
TERMINAL ASSIGNMENTS
10
11
12
13
14
NC
15
16
17
18
INA0 INb0 INA1 INb1
INA2 INb2 INA3 INb3
1
2
3
4
5
6
7
8
9
NC
INB0
NC
INB1
NC
NC
INB2
NC
INB3
SPECIFICATIONS
Isolation: Input 0 to input 1 to input 2 to input 3 to power
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
NC No connection
INB0 RTD 0-B
10 INA0 RTD 0-A
11 INb0 RTD 0-b
12 INA1 RTD 1-A
13 INb1 RTD 1-b
input or LonWorks or FG
Converted data range: Engineering unit value (°C)
Linearization: Standard
NC No connection
INB1 RTD 1-B
NC No connection
NC No connection
INB2 RTD 2-B
14
NC No connection
RTD: Pt 100 (JIS ’97, IEC)(*), Pt 100 (JIS ’89),
JPt 100 (JIS ’89), Pt 50 Ω (JIS ’81), Ni 100,
Cu 10, Cu 50
15 INA2 RTD 2-A
16 INb2 RTD 2-b
17 INA3 RTD 3-A
18 INb3 RTD 3-b
NC No connection
INB3 RTD 3-B
(*) Factory setting
(RTD type is selectable using the LNS Plug-in Software
(model: R7LPLG))
Sensing current: ≤ 1 mA
CIRCUIT DIAGRAM
Input resistance: ≥ 1 MΩ
Input Circuit
INPUT 0
Maximum leadwire resistance: 100 Ω per wire
Conversion accuracy: ±1°C (±1.8°F);
±3°C (±5.4°F) for Cu 10
LONWORKS
LONWORKS
INA0 10
4
NET1
NET1
NET2
NET2
FG
INB0
2
1
Comm.
Circuit
INb0 11
INPUT 1
5
Conversion rate: 250 msec.
Input Circuit
Input Circuit
Input Circuit
2
3
6
INA1 12
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F) of
max. span
INB1
4
U (+)
BURNOUTINDICATION(°C) CONFORMANCE
RTD
INb1
13
Control
Circuit
7
V (–)
INPUT 2
Downscale Upscale
RANGE (°C)
-200 to +850
-200 to +660
-200 to +510
-200 to +649
-80 to +250
-50 to +250
-50 to +150
INA2 15
Pt 100 (JIS ’97, IEC)
Pt 100 (JIS ’89)
JPt 100 (JIS ’89)
Pt 50 Ω (JIS ’81)
Ni 100
-240
-240
-236
-236
-100
-212
-100
+900
+900
+560
+700
+252
+312
+200
INB2
7
INb2 16
INPUT 3
INA3 17
INB3
9
Cu 10 (@25°C)
Cu 50
INb3 18
1
3
FUNCTIONAL BLOCKS
5
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (count)
6
8
14
• fbRS (RTD input & setting)
Input Connection Example
RTD
• fbARM (alarm output)
A
B
B
INAn
INBn
INbn
• fbCV (scaling)
• fbLED (LED function)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 16/26
http://www.m-system.co.jp/
MODEL: R7L
DC VOLTAGE OUTPUT MODULE, 2 points
MODEL: R7L-YV2
CIRCUIT DIAGRAM
Output Circuit
OUTPUT 0
VH0
LONWORKS
4
1
5
2
3
6
7
7
8
2
3
NET1
NET1
NET2
NET2
VL0
LONWORKS
Comm.
Circuit
COM0
COM0
SPECIFICATIONS
Isolation: Output 0 to output 1 to power input or LonWorks
Control
Circuit
Output Circuit
OUTPUT 1
VH1
FG
9
10
4
or FG
U (+)
VL1
Converted data range: 0 – 100.00 of the output range
Output range
V (–)
COM1
COM1
5
Wide span voltage: -10 – +10 V DC(*), -5 – +5 V DC,
0 – 10 V DC, 0 – 5 V DC, 1 – 5 V DC
(*) Factory setting
1
6
Narrow span voltage: -1 – +1 V DC, 0 – 1 V DC,
-0.5 – +0.5 V DC, 0 – 0.5 V DC
(Output range is selectable using the LNS Plug-in Software
(model: R7LPLG))
Operational range: -15 – +115 % of the output range
(except -10 – +10 V DC);
■ Output Connection Examples
approx. -11.5 – +11.5 V DC (-10 – +10 V DC)
Load resistance: ≥ 100 kΩ
VHn
VLn
+
–
VHn
WIDE SPAN
VOLTAGE
VLn
+
NARROW SPAN
VOLTAGE
Conversion accuracy: ±0.1 %
COMn
COMn
–
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (count)
• fbYV (DC voltage output, output range)
• fbCV (scaling)
• fbLED (LED function)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
TERMINAL ASSIGNMENTS
6
7
8
9
10
VL1
NC
VH0
VL0
VH1
1
2
3
4
5
NC
COM0 COM0 COM1 COM1
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
NC No connection
COM0 Common 0
COM0 Common 0
COM1 Common 1
COM1 Common 1
6
7
8
9
NC No connection
VH0 Wide span volt. 0
VL0 Narrow span volt. 0
VH1 Wide span volt. 1
10 VL1 Narrow span volt. 1
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 17/26
http://www.m-system.co.jp/
MODEL: R7L
DC CURRENT OUTPUT MODULE, 2 points
MODEL: R7L-YS2
CIRCUIT DIAGRAM
Output Circuit
OUTPUT 0
LONWORKS
4
1
5
2
3
6
7
7
NET1
NET1
NET2
NET2
FG
I0
2
COM0
Output Circuit
Comm.
Circuit
LONWORKS
OUTPUT 1
I1
SPECIFICATIONS
Isolation: Output 0 to output 1 to power input or LonWorks
9
4
COM1
or FG
1
Converted data range: 0 – 100.00 of the output range
Output range: 4 – 20 mA DC
U (+)
V (–)
3
Control
Circuit
5
Load resistance: ≤ 600Ω
6
Conversion accuracy: ±0.1 %
8
Temperature coefficient: ±0.015 %/°C (±0.008 %/°F)
10
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCNT (count)
• fbYS (DC current output)
• fbCV (scaling)
• fbLED (LED function)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
TERMINAL ASSIGNMENTS
6
7
8
9
10
NC
NC
I0
NC
I1
1
2
3
4
5
NC
COM0
NC
COM1
NC
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
NC No connection
COM0 Common 0
NC No connection
COM1 Common 1
NC No connection
6
7
NC No connection
I0 Current 0
8
NC No connection
I1 Current 1
9
10
NC No connection
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 18/26
http://www.m-system.co.jp/
MODEL: R7L
REMOTE CONTROL RELAY CONTROL MODULE, 8 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7L-RR8
LONWORKS
4
1
5
2
3
6
7
11
2
NET1
NET1
NET2
NET2
FG
Y0
C0
Y1
C1
Y2
C2
Y3
C3
Y4
C4
Y5
C5
Y6
C6
Y7
C7
RECOMMENDED PRODUCTS (OPERATION CHECKED)
Remote control relay:
LONWORKS
12
3
BR-12D, BR-22D (Mitsubishi Electric)
WR6165 (Panasonic)
13
4
U (+)
V (–)
Remote control transformer:
BRT-10B, BRT-20B (Mitsubishi Electric)
WR2301 (Panasonic)
14
5
Control
Circuit
15
6
SPECIFICATIONS
Common: Common per all points
16
7
Number of I/O: Output, 8 points
Maximum outputs applicable at once: No limit
I/O status indicator: Feedback input status turns on with the
input supplied.
17
8
Output status LED turns on with the output ON.
Isolation: Output to LonWorks or FG or power
Rated load voltage: 24 V AC ±10 % (supplied by the remote
control transformer)
18
9
10
1
Load voltage frequency: 50 / 60 Hz
■ Output Connection Example
FUNCTIONAL BLOCKS
The following Functional Blocks are usable. Refer to the
instruction manual for detailed information.
• NodeObject (extension module setting)
• fbCMP (compare)
11
Y0
Remote
Control
Transformer
blue
white
2
C0
Remote
Control
Relay
red
• fbRR (remote control relay control output)
• fbDOEX (discrete output, extension module)
• fbDIEX (discrete input, extension module)
blue
Remote
Control
Relay
18
9
red
Y7
C7
blue
TERMINAL ASSIGNMENTS
10
NC
11
Y0
12
Y1
13
Y2
14
Y3
15
Y4
16
Y5
17
Y6
18
Y7
1
2
3
4
5
6
7
8
9
NC
C0
C1
C2
C3
C4
C5
C6
C7
NO.
1
ID
FUNCTION
NO.
ID
FUNCTION
NC No connection
10 NC No connection
2
C0
C1
C2
C3
C4
C5
C6
C7
Common
Common
Common
Common
Common
Common
Common
Common
11 Y0
12 Y1
13 Y2
14 Y3
15 Y4
16 Y5
17 Y6
18 Y7
Output 0
Output 1
Output 2
Output 3
Output 4
Output 5
Output 6
Output 7
3
4
5
6
7
8
9
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 19/26
http://www.m-system.co.jp/
MODEL: R7L
DISCRETE INPUT EXTENSION MODULE, 8 points
CIRCUIT DIAGRAM
MODEL: R7L-EA8
Input Circuit
1
2
3
4
5
7
8
9
10
6
COM
X0
SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per
X2
8 points
X4
Number of I/O: Input, 8 points
X6
Control
Circuit
Maximum inputs applicable at once: No limit (at 24 V DC)
Input status indicator: LED turns ON with contact ON
Isolation: Input to internal circuits
X1
X3
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
X5
X7
■ Input Circuit
TERMINAL ASSIGNMENTS
6
7
8
9
10
X7
1
2
COM
X0
NC
X1
X3
X5
1
2
3
4
5
COM
X0
X2
X4
X6
Control
Circuit
NO. ID
FUNCTION
COM Common
X0 Input 0
NO. ID
FUNCTION
1
2
3
4
5
6
7
NC No Connection
X1 Input 1
X2 Input 2
X4 Input 4
X6 Input 6
8
X3 Input 3
9
X5 Input 5
10
X7 Input 7
10
X7
■ Input Connection Examples
PNP Connection
NPN Connection
+
–
– +
1
2
1
2
COM
X0
COM
X0
10
10
X7
X7
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 20/26
http://www.m-system.co.jp/
MODEL: R7L
DISCRETE INPUT EXTENSION MODULE, 16 points
CIRCUIT DIAGRAM
Input Circuit
MODEL: R7L-EA16
1
2
COM
X0
X2
X4
X6
X8
XA
XC
XE
X1
X3
X5
X7
X9
XB
XD
XF
SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per
3
4
16 points
5
Number of I/O: Input, 16 points
Maximum inputs applicable at once: No limit (at 24 V DC)
Input status indicator: LED turns ON with contact ON
Isolation: Input to internal circuits
6
7
8
Control
Circuit
Rated input voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / current: ≥ 15 V DC (input – COM) / ≥ 3.5 mA
OFF voltage / current: ≤ 5 V DC (input – COM) / ≤ 1 mA
Input current: ≤ 5.5 mA per point at 24 V DC
Input resistance: Approx. 4.4 kΩ
9
11
12
13
14
15
16
17
18
10
TERMINAL ASSIGNMENTS
10
NC
11
X1
12
X3
13
X5
14
X7
15
X9
16
XB
17
XD
18
XF
1
2
3
4
5
6
7
8
9
COM
X0
X2
X4
X6
X8
XA
XC
XE
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
COM Common
X0 Input 0
X2 Input 2
X4 Input 4
X6 Input 6
X8 Input 8
XA Input 10
XC Input 12
XE Input 14
10
11
12
13
14
15
16
17
18
NC No Connection
X1 Input 1
X3 Input 3
■ Input Circuit
X5 Input 5
X7 Input 7
1
2
COM
X0
X9 Input 9
XB Input 11
XD Input 13
XF Input 15
Control
Circuit
18
XF
■ Input Connection Examples
PNP Connection
NPN Connection
+
–
– +
1
2
1
2
COM
X0
COM
X0
18
18
XF
XF
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 21/26
http://www.m-system.co.jp/
MODEL: R7L
NPN TRANSISTOR OUTPUT EXTENSION MODULE, 8 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7L-EC8A
6
2
3
4
5
7
8
9
10
1
+24V
Y0
Y2
Y4
Y6
Y1
Y3
Y5
Y7
0V
SPECIFICATIONS
Common: Negative common (NPN) per 8 points
Number of I/O: Output, 8 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
Control
Circuit
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
Leakage current: ≤ 0.1 mA
(When driving an inductive load, connect a diode in parallel
with the load.)
■ Output Circuit
TERMINAL ASSIGNMENTS
6
2
+24V
Y0
6
7
8
9
10
Y7
+24 V
Y1
Y3
Y5
1
2
3
4
5
0 V
Y0
Y2
Y4
Y6
NO. ID
FUNCTION
NO. ID
FUNCTION
+24 V 24 V DC
Y1 Output 1
Control
Circuit
1
2
3
4
5
0 V 0 V (common)
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
6
7
10
Y7
8
Y3 Output 3
Y5 Output 5
Y7 Output 7
9
10
1
0V
■ Output Connection Example
6
1
2
+24V
0V
–
+
Y0
10
Y7
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 22/26
http://www.m-system.co.jp/
MODEL: R7L
NPN TRANSISTOR OUTPUT EXTENSION MODULE, 16 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7L-EC16A
10
2
+24V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
SPECIFICATIONS
Common: Negative common (NPN) per 16 points
3
4
Number of I/O: Output, 16 points
5
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
6
7
Rated load voltage: 24 V DC ±10 %
8
Control
Circuit
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
9
Leakage current: ≤ 0.1 mA
11
12
13
14
15
16
17
18
1
(When driving an inductive load, connect a diode in parallel
with the load.)
TERMINAL ASSIGNMENTS
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
0 V 0 V (common)
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
10 +24 V 24 V DC
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
■ Output Circuit
10
+24V
Y0
2
Control
Circuit
18
YF
1
0V
■ Output Connection Example
10
1
+24V
0V
–
+
2
Y0
18
YF
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 23/26
http://www.m-system.co.jp/
MODEL: R7L
PNP TRANSISTOR OUTPUT EXTENSION MODULE, 8 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7L-EC8B
6
2
3
4
5
7
8
9
10
1
+24V
Y0
Y2
Y4
Y6
Y1
Y3
Y5
Y7
0V
SPECIFICATIONS
Common: Positive common (PNP) per 8 points
Number of I/O: Output, 8 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
Control
Circuit
Rated load voltage: 24 V DC ±10 %
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
Leakage current: ≤ 0.1 mA
(When driving an inductive load, connect a diode in parallel
with the load.)
■ Output Circuit
TERMINAL ASSIGNMENTS
6
2
+24V
Y0
6
7
8
9
10
Y7
+24 V
Y1
Y3
Y5
1
2
3
4
5
0 V
Y0
Y2
Y4
Y6
Control
Circuit
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
0 V 0 V
6
7
+24 V 24 V DC (common)
Y1 Output 1
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
10
Y7
0V
8
Y3 Output 3
9
Y5 Output 5
10
Y7 Output 7
1
■ Output Connection Example
+
–
6
1
2
+24V
0V
Y0
10
Y7
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 24/26
http://www.m-system.co.jp/
MODEL: R7L
PNP TRANSISTOR OUTPUT EXTENSION MODULE, 16 points
CIRCUIT DIAGRAM
Output Circuit
MODEL: R7L-EC16B
10
2
+24V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
Y1
Y3
Y5
Y7
Y9
YB
YD
YF
0V
SPECIFICATIONS
Common: Positive common (PNP) per 16 points
3
4
Number of I/O: Output, 16 points
Maximum outputs applicable at once: No limit (at 24 V DC)
Output status indicator: LED turns ON with contact ON
Isolation: Output to internal circuits
5
6
7
Rated load voltage: 24 V DC ±10 %
8
Rated output current: 0.25 A per point, 2.0 A per common
Residual voltage: ≤ 1.2 V
Control
Circuit
9
Leakage current: ≤ 0.1 mA
11
12
13
14
15
16
17
18
1
(When driving an inductive load, connect a diode in parallel
with the load.)
TERMINAL ASSIGNMENTS
10
11
Y1
12
Y3
13
Y5
14
Y7
15
Y9
16
YB
17
YD
18
YF
+24V
1
2
3
4
5
6
7
8
9
0V
Y0
Y2
Y4
Y6
Y8
YA
YC
YE
NO. ID
FUNCTION
NO. ID
FUNCTION
1
2
3
4
5
6
7
8
9
0 V 0 V
10 +24 V 24 V DC (common)
Y0 Output 0
Y2 Output 2
Y4 Output 4
Y6 Output 6
Y8 Output 8
YA Output 10
YC Output 12
YE Output 14
11
12
13
14
15
16
17
18
Y1 Output 1
Y3 Output 3
Y5 Output 5
Y7 Output 7
Y9 Output 9
YB Output 11
YD Output 13
YF Output 15
■ Output Circuit
10
+24V
Y0
2
18
1
Control
Circuit
YF
0V
■ Output Connection Example
+
–
10
1
+24V
0V
2
Y0
18
YF
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 25/26
http://www.m-system.co.jp/
MODEL: R7L
Specifications are subject to change without notice.
R7L SPECIFICATIONS
ES-7804 Rev.13 Page 26/26
http://www.m-system.co.jp/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明