R8-PA4B [MSYSTEM]
Remote I/O R8 Series TOTALIZED PULSE INPUT MODULE, 4 points;
| 型号： | R8-PA4B |
| 厂家： | 
M-SYSTEM |
| 描述： | Remote I/O R8 Series TOTALIZED PULSE INPUT MODULE, 4 points 输入元件 |
| 文件： | 总4页 (文件大小：187K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: R8-PA4
Remote I/O R8 Series
GENERAL SPECIFICATIONS
Connection
•Input: 4-pin e-CON connector
TOTALIZED PULSE INPUT MODULE, 4 points
(NPN / PNP / Voltage pulse input)
Functions & Features
PWB connector XN2D-1474-S002 (Omron)
Recommended cable connector XN2A-1470 (Omron)
Applicable wire size 0.08 mm
2
(AWG28) - 0.5 mm (AWG20)
2
• Space-saving remote I/O module of 4 points input pulse
counter
Outer sheath diameter: max. 1.5 dia
(The cable connector is not included in the package.
Refer to the specifications of the product.)
•Excitation supply, internal bus:
12 (.47)
Connected to internal bus connector
•Internal power: Supplied from internal bus connector
Isolation: Input or exc. supply to internal bus or internal
power
115 (4.53)
Module address: With rotary switch
Terminating resistor: Built-in (DIP Switch, default: disable)
Status indicator: Bi-color (red/green) LED; Refer to the
instruction manual.
59 (2.32)
mm (inch)
Input status indicator: Green LED; Refer to the instruction
manual.
MODEL: R8–PA4[1][2]
INPUT SPECIFICATIONS
Common: Positive or negative common (NPN/PNP) per 4
points
ORDERING INFORMATION
• Code number: R8-PA4-[1][2]
Specify a code from below for each [1] and [2].
(e.g. R8-PA4A/Q)
Number of inputs: 4
I/O status indicator: LED turns on with closed contact.
∙NPN/PNP input (internal supply with excitation supply input
from network power module)
• Specify the specification for option code /Q
(e.g. /C01)
Rated load voltage: 24 V DC ±10 %; ripple 5 %p-p max.
ON voltage / ON resistance: ≤ 4 V (input terminal to COM) /
≤ 900 Ω
[1] INPUT
A: NPN input
OFF voltage / OFF resistance: ≥ 16 V (input terminal to
COM) / ≥ 10 kΩ
B: PNP input
C: Voltage pulse iput
∙Voltage pulse input
Max. input voltage amplitude: 24 V DC + ≤ 10 %
ON voltage / ON current: ≥ 16 V DC (input terminal to
COM) / ≥ 3.7 mA
[2] OPTIONS
blank: none
/Q: With options (specify the specification)
OFF voltage / OFF current: ≤ 5 V DC (input terminal to
COM) / ≤ 1 mA
Input current: ≤ 5.5 mA / point (@24 V DC)
Input resistance: Approx. 4.4 kΩ
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ON delay: ≤ 2.0 msec.
OFF delay: ≤ 2.0 msec.
/C02: Polyurethane coating
Max. Frequency: 100 Hz
Minimum ON/OFF pulse requirements: 5 ms
Accumulated pulse count: 0 - 4 294 967 295
Max. accumulable pulse: 1 - 4,294,967,295 (factory setting:
4,294,967,295)
RELATED PRODUCTS
• PC configurator software (model: R8CFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the module to the
PC. Please refer to the internet software download site or
the users manual for the PC configurator for applicable
cable types.
Overflow reset value: 0 or 1 (factory setting: 0)
http://www.m-system.co.jp/
R8-PA4 SPECIFICATIONS
ES-9739 Rev.2 Page 1/4
MODEL: R8-PA4
INSTALLATION
Max. current consumption: 80 mA
Operating temperature: -10 to +55°C (14 to 131°F)
Operating humidity: 30 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
Weight: 60 g (2.12 oz)
PERFORMANCE
Data allocation: 2
Module addresses in use: 4
Power output (input terminal): Rated curent 0.1A DC per
channel
(rated current 3 A for internal fuse (slow blow fuse i
2
t (A sec)
2
max. 0.31)
Total 0.4 A DC
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(input or exc. supply to internal bus or internal power to
ground)
STANDARDS & APPROVALS
EU conformity:
EMC Directive
EMI EN 61000-6-4
EMS EN 61000-6-2
RoHS Directive
EN 50581
EXTERNAL VIEW
FRONT VIEW
SIDE VIEW
Module Address Setting
Rotary SW
0
0
Status Indicator LED
SW1
SW2
5
5
RUN
Input Status Indicator LED
x10 CARD ADD. x1
Internal Bus Connector
PI1
PI2
PI3
PI4
On
Input Connectors
Term
SW3
Terminator DIP SW
http://www.m-system.co.jp/
R8-PA4 SPECIFICATIONS
ES-9739 Rev.2 Page 2/4
MODEL: R8-PA4
OPERATING MODE SETTING
(*) Factory setting
■ Module Address
The left switch determines the tenth place digit, while the
right switch does the ones place digit of the address.
Address is selected between 0 to 28.
(Factory setting: 0)
0
0
5
5
Module Address Setting (x1)
Module Address Setting (x10)
■ Terminator DIP SW
TERMINATOR SW
Without (*)
With
SW3
OFF
ON
DIMENSIONS unit: mm (inch)
12 (.47) [3 (.12)]
59 (2.32)
55 (2.17)
[4 (.16)]
DIN RAIL
(35 mm wide)
http://www.m-system.co.jp/
R8-PA4 SPECIFICATIONS
ES-9739 Rev.2 Page 3/4
MODEL: R8-PA4
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
+24V
STATUS
INPUT
IND. STATUS LED
VOLTAGE PULSE INPUT PNP INPUT
NPN INPUT
EXC. SUPPLY
INPUT CONNECTOR 1
Input Circuit
0V
Comm.
Circuit
COM1
NC
24V_1 (COM1)
24V_1
NC
1
2
3
4
INTERNAL BUS
Control
Circuit
NC
0V_1
PI1
PI1
PI1
0V_1
PI1
0V_1(COM1)
Power
Circuit
INTERNAL POWER
PI1
ROTARY SW
DIP SW
0V
PI1
・
・
・
・
・
INPUT CONNECTOR 4
COM4
NC
24V_4 (COM4)
24V_4
NC
1
2
3
4
NC
0V_4
PI4
PI4
PI4
0V_4
PI4
0V_4(COM4)
PI4
PI4
0V
■ NPN INPUT
+24V +24V
INPUT CONNECTOR 1
24V_1
1
2
3
4
NC
Control
Circuit
0V_1(COM1)
Detection
PI1
0V
PI1
■ PNP INPUT
INPUT CONNECTOR 1
24V_1(COM1)
+24V
1
0V
NC
2
3
4
Control
Circuit
PI1
0V_1
Detection
PI1
0V
■ VOLTAGE PULSE INPUT
INPUT CONNECTOR 1
COM1
– Side
1
2
3
4
NC
0V_1
PI1
Control
Circuit
0V
+ Side
Specifications are subject to change without notice.
http://www.m-system.co.jp/
R8-PA4 SPECIFICATIONS
ES-9739 Rev.2 Page 4/4
相关型号：
©2020 ICPDF网 联系我们和版权申明