SC100-M20-R/600 [MSYSTEM]

Single Loop Controller Series MULTI-FUNCTION PID CONTROLLER;


型号：	SC100-M20-R/600
厂家：	M-SYSTEM
描述：	Single Loop Controller Series MULTI-FUNCTION PID CONTROLLER
文件：	总10页 (文件大小：395K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: SC100

/4: 400 mm

/6: 600 mm

Language

blank: Japanese

/E: English

Single Loop Controller Series

MULTI-FUNCTION PID CONTROLLER

(color LCD with touch-panel)

(Language (Japanese or English) can be chosen by front

panel setting.)

Configurator Interface

blank: Infrared

/1: Stereo jack

(If external noise interference is a concern, stereo jack

type is recommended.)

144

(5.67)

Terminal block

blank: One block terminal

/T: Separable terminal

mm (inch)

Other Options

*Selectable with option code

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

MODEL: SC100–[1]0–[2][3]

ORDERING INFORMATION

• Code number: SC100-[1]0-[2][3]

Specify a code from below for each [1] through [3].

(e.g. SC100-10-M2/3/E/1/T/Q)

/C02: Polyurethane coating

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

• Specify the specification for option code /Q

(e.g. /C01/S01)

FUNCTIONS & FEATURES

Functions & Features

[1] DISCRETE OUTPUT

1: Relay contact

• Color LCD with touch panel

• Five Operation views (digital display, bargraph, dual-loop

bargraph, short trend and user's parameter table views)

• Enhanced screen functions for engineering (configuration,

programming and tuning views)

2: Photo MOSFET relay

MODBUS

0:None

• Universal input x 2 points, analog input x 4 points,

discrete input x 6 points, pulse input x 5 points, high speed

pulse input x 1 point

[2] POWER INPUT

AC Power

• Current output (4-20 mA) x 2 points, voltage output (1-5

V) x 2 points, relay or photo-MOSFET relay output x 5 points

• RUN contact output (relay) x 1 point

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)

DC Power

• Computation cycle selectable between 50 msec. and 3

sec. (control cycle selectable between 1 and 64 times of the

computation cycle)

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Two PID function blocks

• Advanced computation and sequence control functions

• Auto-tuning function

[3] OPTIONS (multiple selections)

Housing Depth

• Parameter input and changing with touch panel

• Function parameter setting, list printing and data

downloading/uploading available with Loop Configuration

Builder Software (model: SFEW3E)

blank: 250 mm

/300: 300 mm (Discontinued, select /3)

/400: 400 mm (Discontinued, select /4)

/600: 600 mm (Discontinued, select /6)

/3: 300 mm

• Display parameter setting, saving and transfer with PC

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 1/10

http://www.m-system.co.jp/

MODEL: SC100

Configurator Software (model: SCCFG)

operations, time functions, signal selection, limit, alarm and

other functions

• Selectable housing depth for ease of using existing wires

in replacement: 250 mm, 300 mm, 400 mm and 600 mm

• Separable terminal block

Sequence operation: Logic sequence and step sequence

(max. 1068 commands)

Computation cycle: 50 msec. to 3 sec. (control cycle

selectable among 1, 2, 4, 8, 16, 32 and 64 times of the

computation cycle)

Typical Applications

• Replacement of conventional controllers

• Panel operation for small-scale instrumentation

MV output range: -15 - +115 %

Parameter setting: With touch panel or PC (Loop

Configuration Builder Software model: SFEW3E)

Self diagnostics: CPU monitoring with a watchdog timer

RUN contact: OFF in error detected by diagnostic

Infrared communication: Transmission distance max. 0.2

meter (for use with the COP-IRDA)

RELATED PRODUCTS

• PC Configurator cable (model: COP-US)

• Loop configuration builder software (model: SFEW3E Ver.

1.40 or later)

• Infrared communication adaptor (model: COP-IRDA)

• PC configurator software (model: SCCFG Ver.1.50 or later)

Builder software and configurator software are

downloadable at M-System’s web site.

■ Display

Display device: 4.3-inch TFT LCD

Display colors: 256

Resolution: 480 × 272 pixels

ACCESSORIES

• Precision resistor module (model: REM4): 2

Pixel pitch: 0.198 × 0.198 mm (128 × 128 DPI)

Backlight: LED

• Cold junction sensor: 2

Backlight life: Approx. 50 000 hours (at 50 % brightness)

Note: The backlight can be replaced in M-System factory.

The LCD must be replaced at the same time.

Screen saver standby time: 1 to 99 minutes

Scaling range: -32000 to +32000

• Mounting brackets: 2

• Connector adapter: 1

(included in Stereo jack type. The jack on the unit and the

plug of PC Configurator cable (not included in the product)

are different in size.)

Decimal point position: 10-1, 10-2, 10-3, 10-4, 10-5 or none

Scale divisions: 2 to 10

Engineering unit indication: Max. 8 characters

Auto/Man indicator: Green/Amber LED

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

Degree of protection: IP55; ensured for the front panel of

the unit independently mounted to a panel

Connection

FACTORY DEFAULT

■ LOOP 1

P : 100%

Terminal screws: M3.5 screw terminals (torque 1.0 N·m)

Terminal fixing screws: M4 screw terminals (torque 1.2

N·m)

I : No integral action

D : No derivative action

CAS

PID

G02

Screw terminal

SEQ

G81

Reverse Action

Ai 1

Pv 1

Mv 1

Terminal screws: Nickel-plated steel (standard) or stainless

steel

(PV /MV

)

1 – 5 V DC

4 – 20 mA DC

Terminal fixing screws: Chrome-plated steel

Housing material: Flame-resistant resin (gray), steel

Isolation: Pv1 to Pv2 to supply output to Ai1 or Ai2 or Ai3 or

Ai4 to Di1 or Di2 or Di3 or Di4 or Di5 or Pi1 or Pi2 or Pi3 or

Pi4 or Pi5 to Di6 or Pi6 to Mv1 to Mv2 to Ao1 or Ao2 to Do1

to Do2 to Do3 to Do4 to Do5 to Do6 to power to FG

PID control: Single loop, cascade, advanced

Proportional band (P): 1 to 1000 %

AL1

AL2

■ LOOP 2

P : 100%

: No integral action

D : No derivative action

CAS

PID

G03

SEQ

G81

Reverse Action

Ai 2

Pv 2

Mv 2

(PV /MV

)

Integral time (I): 0.01 to 100 minutes

1 – 5 V DC

4 – 20 mA DC

Derivative time (D): 0.01 to 10 minutes

Auto-tuning: Limit cycle method

AL3

AL4

*1. Factory default setting

Use Loop Configuration Builder Software (model: SFEW3E)

to modify setting.

Alarm: PV high & low, deviation, rate of change

Computation: 48 functions blocks available for arithmetic

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 2/10

http://www.m-system.co.jp/

MODEL: SC100

Current limiting circuit: Approx. 30 mA

SUPPLY OUTPUT

Output voltage:

■ Di1, Di2, Di3, Di4, Di5: Dry contact

(Pi1 through Pi5 are assigned to the same terminals

respectively.)

24 V DC ±10 % with no load

18 V DC min. at 20 mA

Current rating: ≤ 22 mA DC

∙Shortcircuit protection

Current limited: Approx. 30 mA

Common: Negative common per 5 points

Sensing: Approx. 12 V DC, 6 mA

ON voltage/resistance: ≤ 2.25 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11.25 V ≥ 15 kΩ

■ Di6: Dry contact

INPUT SPECIFICATIONS

■ Pv1, Pv2 (universal input)

(Pi6 is assigned to the same terminal.)

Common: Negative common

∙Current input: 4 – 20 mA DC with input resistance 250 Ω

(REM4)

Sensing: Approx. 12 V DC, 12 mA

ON voltage/resistance: ≤ 2 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11 V, ≥ 15 kΩ

[Table 1 (Thermocouple input)]

∙Voltage input: -10 – +10 V DC

-1 – +1 V DC

0 – 10 V DC

USABLE

RANGE (°C)

CONFORMANCE

RANGE (°C)

1 – 5 V DC

T/C

K (CA)

0 – 1 V DC

-272 to +1472

-272 to +1100

-260 to +1300

-272 to +500

24 to 1920

-150 to +1370

-170 to +1000

-180 to +1200

-170 to +400

1000 to 1760

380 to 1760

400 to 1760

100 to 2315

-130 to +1300

-200 to +600

-200 to +900

0 to 1395

Input resistance: ≥ 1 MΩ

E (CRC)

∙Thermocouple input: K, E, J, T, B, R, S, C, N, U, L, P, PR (See

Table 1)

J (IC)

T (CC)

Input resistance: ≥ 30 kΩ

B (RH)

Burnout sensing: ≤ 0.3 µA

-100 to +1860

-52 to +2416

-272 to +1400

-252 to +700

-252 to +1000

-52 to +1496

-52 to +1860

Burnout indication: 115 % of the measuring range (upscale)

∙RTD input: Pt100 (JIS ’97, IEC), Pt100 (JIS ’89), JPt100 (JIS

’89), Pt50Ω (JIS ’81), Ni100 (See Table 2)

Maximum lead wire resistance: 100 Ω per wire

Burnout indication: 115 % of the measuring range (upscale)

Sensing current: ≤ 1 mA

C (WRe 5-26)

P (Platinel II)

(PR)

300 to 1760

∙Potentiometer input: Total resistance 100 Ω to 10 kΩ

Minimum span: 50 % of total resistance

Excitation: ≤ 0.6 V DC

Overrange input (out of the usable range) is handled as burnout.

[Table 2 (RTD input)]

■ Ai1, Ai2, Ai3, Ai4

USABLE

RANGE (°C)

CONFORMANCE

RANGE (°C)

RTD

∙Voltage input: 1 – 5 V DC

Pt 100 (JIS ’97, IEC

Pt 100 (JIS ’89)

JPt 100 (JIS ’89)

Pt 50Ω (JIS ’81)

Ni 100

)

-240 to +900

-236 to +560

-236 to +700

-100 to +252

-200 to +850

-200 to +660

-200 to +510

-200 to +649

-80 to +250

Input resistance: ≥ 1 MΩ

■ Pi1, Pi2, Pi3, Pi4, Pi5: Dry contact

(Di1 through Di5 are assigned to the same terminals

respectively.)

Maximum frequency: 20 Hz

Overrange input (out of the usable range) is handled as burnout.

Minimum pulse width: 25 msec.

Common: Negative common per 5 points

Sensing: Approx. 12 V DC, 6 mA

ON voltage/resistance: ≤ 2.25 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11.25 V ≥ 15 kΩ

■ Pi6: Dry contact

OUTPUT SPECIFICATIONS

■ Mv1, Mv2

∙Current output: 4 – 20 mA DC

Load resistance: ≤ 600 Ω

■ Ao1, Ao2

(Di6 is assigned to the same terminal.)

Maximum frequency: 10 kHz

∙Voltage output: 1 – 5 V DC

Load resistance: ≥ 10 kΩ

■ Discrete Output

Minimum pulse width: 0.05 msec.

Common: Negative common

Sensing: Approx. 12 V DC, 12 mA

ON voltage/resistance: ≤ 2 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11 V, ≥ 15 kΩ

Excitation: 12 V DC ±10%, 15 mA

∙Do1, Do2, Do3, Do4, Do5, RUN contact (Do6): Relay

contact

Rated load: 250 V AC @1 A (cos ø = 1)

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 3/10

http://www.m-system.co.jp/

MODEL: SC100

30 V DC @1 A (resistive load)

RAM memory duration in power failure for hot start:

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA or 60 W

Minimum load: 5 V DC @10 mA

10 minutes assured

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

Mechanical life: 2 × 10

cycles

1500 V AC @ 1 minute

∙Do1, Do2, Do3, Do4, Do5: Photo MOSFET relay

Rating: 200 V AC/DC @0.5 A (resistive load)

ON resistance: 2.1 Ω

(Pv1 or supply output to Pv2 or Ai1 or Ai2 or Ai3 or Ai4 to

Di1 or Di2 or Di3 or Di4 or Di5 or Pi1 or Pi2 or Pi3 or Pi4 or

Pi5 to Di6 or Pi6 to Mv1 to Mv2 or Ao1 or Ao2 to Do1 to Do2

or Do3 or Do4 or Do5 or Do6 to power to FG)

500 V AC @ 1 minute (Pv2 to Ai1 or Ai2 or Ai3 or Ai4)

500 V AC @ 1 minute (Mv2 to Ao1 or Ao2)

500 V AC @ 1 minute (Do2 to Do3 to Do4 to Do5 to Do6)

500 V AC @ 1 minute (Pv1 to supply output)

Maximum frequency: 4 Hz @24 V, 10 mA

ON delay time: ≤ 5.0 msec.

OFF delay time: ≤ 3.0 msec.

INSTALLATION

Power input

∙AC:

STANDARDS & APPROVALS

EU conformity:

≤ 25 VA at 100 V AC

≤ 40 VA at 240 V AC

EMC Directive

•DC: ≤ 650 mA

EMI EN 61000-6-4

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 5 to 90 %RH (non-condensing)

Mounting: Panel flush mounting (high-density mounting in

horizontal direction)

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Measurement Category II (contact output)

Installation Category II (power)

Pollution degree 2

Weight:

Approx. 1.8 kg (3.97 lb) for 250 mm depth type

Approx. 2.0 kg (4.41 lb) for 300 mm depth type

Approx. 2.5 kg (5.51 lb) for 400 mm depth type

Approx. 3.0 kg (6.61 lb) for 600 mm depth type

Input or output to contact output – Basic insulation (300

Input or output to power - Reinforced insulation (300 V)

RoHS Directive

EN 50581

PERFORMANCE in percentage of max. span

Accuracy

Protection against access to the terminal blocks:

Finger protection (VDE 0660-514)

DC input: ±0.1 % ±1 digit

Thermocouple input: ±1℃ ±1 digit

±2℃ ±1 digit for B, R, S, C and PR

RTD input: ±1℃ ±1 digit

Potentiometer input: ±0.2 % ±1 digit

DC output: ±0.1 %

Precision resistor module (REM4): ±0.1 %

Cold junction compensation:

±2°C at 25°C ±10°C

±4°C for S, R and PR

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

DC input: ±0.015 %/°C (±0.008 %/°F)

Thermocouple input: ±0.015 %/°C (±0.008 %/°F)

RTD input: ±0.015 %/°C (±0.008 %/°F)

Potentiometer input: ±0.015 %/°C (±0.008 %/°F)

DC output: ±0.015 %/°C (±0.008 %/°F)

Precision resistor module (REM4): ±0.015 %/°C (±0.008

%/°F)

Line voltage effect: ±0.1 % over voltage range

Calendar clock accuracy: Monthly deviation 3 minutes at

25°C

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 4/10

http://www.m-system.co.jp/

MODEL: SC100

EXTERNAL VIEW

■ CONTROL MODULE FRONT VIEW

• Infrared communication type

• Stereo jack type

Auto/Man

1. TFT Color LCD with touch panel

Provides operation and engineering views to facilitate monitoring and setting

2. Infrared communication port

Used to communicate with PC via IRDA Communication Adaptor (model: COP-IRDA) to program and change parameters

using Loop Configuration Builder Software (model: SFEW3E) or PC Configurator Software (model: SCCFG)

3. MV value (DOWN) button

4. Acceleration button

(Accelerates MV signal’s changing speed by pressing simultaneously with MV value button)

5. MV value (UP) button

6. Auto / Man selector (changes the control mode for MV output)

7. Configurator jack and cap

Connects with a PC where Loop Configuration Builder Software (model: SFEW3E) or PC configurator software (model: SCCFG)

is installed via a PC configurator cable (model: COP-US) and enables programming and parameter setting

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 5/10

http://www.m-system.co.jp/

MODEL: SC100

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

■ INFRARED COMMUNICATION TYPE

175 (6.89)

210 (8.27) max.

• ONE BLOCK TERMINAL

(without option /T)

MOUNTING BRACKETS

TERMINAL COVER

52–M3.5 SCREW

72 (2.83)

67.5 (2.66)

(.94)

• SEPARABLE TERMINAL

(with option /T)

*1. Standard model: 250 mm (9.84”)

Option /3:

Option /4:

Option /6:

300 mm (11.81”)

400 mm (15.75”)

600 mm (23.62”)

52–M3.5 SCREW

4–M4 SCREW FOR

FIXING TERMINAL

67.5 (2.66)

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 6/10

http://www.m-system.co.jp/

MODEL: SC100

■ STEREO JACK TYPE

175 (6.89)

210 (8.27) max.

• ONE BLOCK TERMINAL

(without option /T)

MOUNTING BRACKETS

TERMINAL COVER

52–M3.5 SCREW

Jack cap

1 (.04)

72 (2.83)

67.5 (2.66)

(.94)

• SEPARABLE TERMINAL

(with option /T)

*1. Standard model: 250 mm (9.84”)

Option /3:

Option /4:

Option /6:

300 mm (11.81”)

400 mm (15.75”)

600 mm (23.62”)

52–M3.5 SCREW

4–M4 SCREW FOR

FIXING TERMINAL

67.5 (2.66)

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 7/10

http://www.m-system.co.jp/

MODEL: SC100

MOUNTING REQUIREMENTS unit: mm

■ PANEL CUTOUT unit: mm

• Single mounting

• Clustered mounting

[68+72×(n - 1)] ⁺¹

68 ^+0.7

n = number of units

Panel thickness 2.3 – 20

■ Caution

• IP55 is ensured for the front panel of the unit mounted independently according to a panel. Test the sealing at the mounting

surface once the device is installed.

• Set the unit on a vertical surface with its operation buttons at the lower side. Mounting in other directions may cause heat

built up inside the unit and shorten its life span or degrade its performance.

• Ensure that there is sufficient space for ventilation inside a panel. Do not install above the devices that generate high heat

such as heaters, transformers or resistors. Leave at least 30 mm (1.2 inch) space above, below and behind the unit for

maintenance purpose (e.g. wiring, removing or installing).

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 8/10

http://www.m-system.co.jp/

MODEL: SC100

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FG terminal to ground.

Caution: FG terminal is NOT a protective conductor terminal.

Isolation

Discrete

Input

Circuit

Di 1 / Pi 1

Di 2 / Pi 2

Di 3 / Pi 3

Di 4 / Pi 4

Di 5 / Pi 5

Do 1

Do 2

Do 3

Do 4

Do 5

–

Isolation

Sensor

Excitation

SENSOR EXC

Di 6 /Pi 6

Digital

Input

Circuit

Computation

INPUT

COM

Do 6

RUN CONTACT

Isolation

Output

Driver

A1 42

B1 43

C1 44

A2 45

B2 46

C2 47

–

A/D

Converter

Mv 1

Mv 2

Pv 1

UNIVERSAL INPUT

Output

Driver

A/D

Converter

Pv 2

UNIVERSAL INPUT

Output

Driver

Ao 1

Ao 2

Output

Driver

–

A/D

Converter

Ai 1

Ai 2

Ai 3

Ai 4

12 U(+)

POWER

13 V(–)

–

26 FG

Isolation

Excitation

Supply

–

2-WIRE TRANSMITTER

PC CONFIGURATOR/

BUILDER SOFTWARE

Infrared Port / Jack

Display /

Setting

■ DISCRETE INPUT PULSE

INPUT CONNECTION E.G.:

+12V

■ UNIVERSAL INPUT CONNECTION E.G.

POTENTIOMETER

max.

RTD

–

Dry contact

2-Wire

XMTR

T/C

1 or 2kΩ

–

VOLT / CURRENT

INPUT

–

min.

CJC SENSOR

*3. Connect input resistor module (model: REM4) for current input.

*4. Connect CJC sensor for thermocouple input.

*5. Connect input resistor module (model: REM4).

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 9/10

http://www.m-system.co.jp/

MODEL: SC100

SYSTEM CONFIGURATION EXAMPLES

■ SINGLE LOOP CONTROL

■ CASCADE CONTROL

Multi-Function PID Controller

Model: SC100

Multi-Function PID Controller

Model: SC100

Flow

Level

Specifications are subject to change without notice.

SC100 SPECIFICATIONS

ES-6337 Rev.16 Page 10/10

http://www.m-system.co.jp/

SC100-M20-R/600 [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E