SC200-11-M2 [MSYSTEM]

Single Loop Controller Series MULTI-FUNCTION PID CONTROLLER;


型号：	SC200-11-M2
厂家：	M-SYSTEM
描述：	Single Loop Controller Series MULTI-FUNCTION PID CONTROLLER
文件：	总12页 (文件大小：530K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: SC200

Language

Single Loop Controller Series

blank: Japanese

/E: English

MULTI-FUNCTION PID CONTROLLER

(color LCD with touch-panel, Modbus/NestBus

communication)

(Language (Japanese or English) can be chosen by front

panel setting.)

Configurator Interface

blank: Infrared

/1: Stereo jack

(If external noise interference is a concern, stereo jack

type is recommended.)

Terminal block

blank: One block terminal

/T: Separable terminal

144

(5.67)

Other Options

mm (inch)

blank: none

/Q: Option other than the above (specify the specification)

*Selectable with option code

SPECIFICATIONS OF OPTION: Q (multiple selections)

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

MODEL: SC200–[1][2]–[3][4]

/C02: Polyurethane coating

ORDERING INFORMATION

• Code number: SC200-[1][2]-[3][4]

Specify a code from below for each [1] through [4].

(e.g. SC200-11-M2/3/E/1/T/Q)

/C03: Rubber coating

TERMINAL SCREW MATERIAL

/S01: Stainless steel

• Specify the specification for option code /Q

(e.g. /C01/S01)

FUNCTIONS & FEATURES

Functions & Features

• Color LCD with touch panel

[1] DISCRETE OUTPUT

1: Relay contact

• Five Operation views (digital display, bargraph, dual-loop

bargraph, short trend and user's parameter table views)

• Enhanced screen functions for engineering (configuration,

programming and tuning views)

2: Photo MOSFET relay

[2] MODBUS

1: Modbus-RTU

2: Modbus/TCP

• Universal input x 2 points, analog input x 4 points,

discrete input x 6 points, pulse input x 5 points, high speed

pulse input x 1 point

• Current output (4-20 mA) x 2 points, voltage output (1-5

V) x 2 points, relay or photo-MOSFET relay output x 5 points

• RUN contact output (relay) x 1 point

[3] POWER INPUT

AC Power

• I/O signals can be added with remote I/O modules

connected via NestBus peer-to-peer communication

• Computation cycle selectable between 50 msec. and 3

sec. (control cycle selectable between 1 and 64 times of the

computation cycle)

M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)

DC Power

R: 24 V DC

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

• Two PID function blocks

[4] OPTIONS (multiple selections)

Housing Depth

• Advanced computation and sequence control functions

• Auto-tuning function

blank: 250 mm

• Parameter input and changing with touch panel

• Function parameter setting, list printing and data

downloading/uploading available with Loop Configuration

Builder Software (model: SFEW3E)

/300: 300 mm (Discontinued, select /3)

/400: 400 mm (Discontinued, select /4)

/3: 300 mm

/4: 400 mm

• Short trend export (CSV), display parameter setting,

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 1/12

http://www.m-system.co.jp/

MODEL: SC200

saving and transfer with PC Configurator Software (model:

SCCFG)

Integral time (I): 0.01 to 100 minutes

Derivative time (D): 0.01 to 10 minutes

Auto-tuning: Limit cycle method

• Control and supervision by SCADA software via Modbus

TCP/IP or RTU communication

Alarm: PV high & low, deviation, rate of change

Computation: 48 functions blocks available for arithmetic

operations, time functions, signal selection, limit, alarm and

other functions

• Selectable housing depth for ease of using existing wires

in replacement: 250 mm, 300 mm and 400 mm

• Separable terminal block

Sequence operation: Logic sequence and step sequence

(max. 1068 commands)

Typical Applications

• Replacement of conventional controllers

• Panel operation for small-scale instrumentation

Computation cycle: 50 msec. to 3 sec. (control cycle

selectable among 1, 2, 4, 8, 16, 32 and 64 times of the

computation cycle)

MV output range: -15 - +115 %

RELATED PRODUCTS

Parameter setting: With touch panel or PC (Loop

Configuration Builder Software model: SFEW3E)

Self diagnostics: CPU monitoring with a watchdog timer

RUN contact: OFF in error detected by diagnostic (including

NestBus)

• PC Configurator cable (model: COP-US)

• Loop configuration builder software (model: SFEW3E Ver.

1.40 or later)

• Infrared communication adaptor (model: COP-IRDA)

• PC configurator software (model: SCCFG Ver.1.50 or later)

Builder software and configurator software are

downloadable at M-System’s web site.

Infrared communication: Transmission distance max. 0.2

meter (for use with the COP-IRDA)

Short trend

Storing interval: 1, 2, 5, 10, 20, 30 sec.,

1, 2, 5, 10, 30, 60 min.

ACCESSORIES

• Precision resistor module (model: REM4): 2

Capacity: 400 points (display 200 points)

• Cold junction sensor: 2

• Mounting brackets: 2

■ Display

• Connector adapter: 1

Display device: 4.3-inch TFT LCD

(included in Stereo jack type. The jack on the unit and the

plug of PC Configurator cable (not included in the product)

are different in size.)

Display colors: 256

Resolution: 480 × 272 pixels

Pixel pitch: 0.198 × 0.198 mm (128 × 128 DPI)

Backlight: LED

Backlight life: Approx. 50 000 hours (at 50 % brightness)

Note: The backlight can be replaced in M-System factory.

The LCD must be replaced at the same time.

Screen saver standby time: 1 to 99 minutes

Scaling range: -32000 to +32000

GENERAL SPECIFICATIONS

Construction: Panel flush mounting

Degree of protection: IP55; ensured for the front panel of

the unit independently mounted to a panel

Connection

Decimal point position: 10-1, 10-2, 10-3, 10-4, 10-5 or none

Scale divisions: 2 to 10

Terminal screws: M3.5 screw terminals (torque 1.0 N·m)

Terminal fixing screws: M4 screw terminals

(torque 1.2 N·m)

Engineering unit indication: Max. 8 characters

Auto/Man indicator: Green/Amber LED

Ethernet: RJ-45 Modular Jack

Screw terminal

Terminal screws: Nickel-plated steel (standard) or stainless

steel

Terminal fixing screws: Chrome-plated steel

Housing material: Flame-resistant resin (gray), steel

Isolation: Pv1 to Pv2 to supply output to Ai1 or Ai2 or Ai3 or

Ai4 to Di1 or Di2 or Di3 or Di4 or Di5 or Pi1 or Pi2 or Pi3 or

Pi4 or Pi5 to Di6 or Pi6 to Mv1 to Mv2 to Ao1 or Ao2 to Do1

to Do2 to Do3 to Do4 to Do5 to Do6 to NestBus to Modbus-

RTU to Modbus/TCP to power to FG

PID control: Single loop, cascade, advanced

Proportional band (P): 1 to 1000 %

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 2/12

http://www.m-system.co.jp/

MODEL: SC200

Protocol: Modbus/TCP

Data: RTU (binary)

Connections: 2

FACTORY DEFAULT

■ LOOP 1

P : 100%

I : No integral action

D : No derivative action

Transmission media:

CAS

10BASE-T (STP cable, category 5)

100BASE-TX (STP cable, category 5e)

Max. segment length: 100 meters

Port number: 502

PID

G02

SEQ

G81

Reverse Action

Ai 1

Pv 1

Mv 1

(PV /MV

)

1 – 5 V DC

IP address: 192.168.0.1 (factory setting)

1 – 5 V DC

4 – 20 mA DC

AL1

AL2

SUPPLY OUTPUT

Output voltage:

■ LOOP 2

P : 100%

: No integral action

D : No derivative action

24 V DC ±10 % with no load

18 V DC min. at 20 mA

Current rating: ≤ 22 mA DC

∙Shortcircuit protection

Current limited: Approx. 30 mA

CAS

PID

G03

SEQ

G81

Reverse Action

Ai 2

Pv 2

Mv 2

(PV /MV

)

1 – 5 V DC

4 – 20 mA DC

INPUT SPECIFICATIONS

■ Pv1, Pv2 (universal input)

AL3

AL4

∙Current input: 4 – 20 mA DC with input resistance 250 Ω

(REM4)

*1. Factory default setting

Use Loop Configuration Builder Software (model: SFEW3E)

to modify setting.

∙Voltage input: -10 – +10 V DC

-1 – +1 V DC

0 – 10 V DC

EXTERNAL INTERFACE

■ NestBus

1 – 5 V DC

0 – 1 V DC

Configuration: Bus type multi-drop

Standard: Conforms to TIA/EIA-485-A

Transfer rate: 19.2 kbps

Input resistance: ≥ 1 MΩ

∙Thermocouple input: K, E, J, T, B, R, S, C, N, U, L, P, PR (See

Table 1)

Protocol: NestBus (M-System’s own protocol)

Max. transmission distance: 1 kilometer

Transmission media:

Input resistance: ≥ 30 kΩ

Burnout sensing: ≤ 0.3 µA

Burnout indication: 115 % of the measuring range (upscale)

∙RTD input: Pt100 (JIS ’97, IEC), Pt100 (JIS ’89), JPt100 (JIS

’89), Pt50Ω (JIS ’81), Ni100 (See Table 2)

Maximum lead wire resistance: 100 Ω per wire

Burnout indication: 115 % of the measuring range (upscale)

Sensing current: ≤ 1 mA

Shielded twisted-pair cable (CPEV-S 0.9 dia.)

Terminating resistor: incorporated

Address setting: 0 - F (16 nodes)

■ Modbus-RTU

Configuration: Half-duplex, asynchronous, no procedure

Standard: Conforms to TIA/EIA-485-A

Max. transmission distance: 500 meters

Transfer rate: 4800, 9600, 19.2 k, 38.4 k bps

Data bit: 8

∙Potentiometer input: Total resistance 100 Ω to 10 kΩ

Minimum span: 50 % of total resistance

Excitation: ≤ 0.6 V DC

■ Ai1, Ai2, Ai3, Ai4

Parity bit: Odd, even, none

∙Voltage input: 1 – 5 V DC

Max. node number: 15 (except the master)

Transmission media:

Input resistance: ≥ 1 MΩ

■ Pi1, Pi2, Pi3, Pi4, Pi5: Dry contact

(Di1 through Di5 are assigned to the same terminals

respectively.)

Shielded twisted-pair cable (CPEV-S 0.9 dia.)

Terminating resistor: incorporated

Node address setting: 1 - 247

Maximum frequency: 20 Hz

■ Modbus/TCP (Ethernet)

Minimum pulse width: 25 msec.

Common: Negative common per 5 points

Sensing: Approx. 12 V DC, 6 mA

Physical layer standard: IEEE 802.3u

Data link layer: 10BASE-T / 100BASE-TX

Transfer rate: 10 / 100 Mbps, Auto Negotiation

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 3/12

http://www.m-system.co.jp/

MODEL: SC200

ON voltage/resistance: ≤ 2.25 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11.25 V ≥ 15 kΩ

■ Pi6: Dry contact

OUTPUT SPECIFICATIONS

■ Mv1, Mv2

∙Current output: 4 – 20 mA DC

Load resistance: ≤ 600 Ω

(Di6 is assigned to the same terminal.)

Maximum frequency: 10 kHz

■ Ao1, Ao2

Minimum pulse width: 0.05 msec.

Common: Negative common

∙Voltage output: 1 – 5 V DC

Load resistance: ≥ 10 kΩ

Sensing: Approx. 12 V DC, 12 mA

ON voltage/resistance: ≤ 2 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11 V, ≥ 15 kΩ

Excitation: 12 V DC ±10%, 15 mA

Current limiting circuit: Approx. 30 mA

■ Di1, Di2, Di3, Di4, Di5: Dry contact

(Pi1 through Pi5 are assigned to the same terminals

respectively.)

■ Discrete Output

∙Do1, Do2, Do3, Do4, Do5, RUN contact (Do6): Relay

contact

Rated load: 250 V AC @1 A (cos ø = 1)

30 V DC @1 A (resistive load)

Maximum switching voltage: 250 V AC or 30 V DC

Maximum switching power: 250 VA or 60 W

Minimum load: 5 V DC @10 mA

Common: Negative common per 5 points

Sensing: Approx. 12 V DC, 6 mA

ON voltage/resistance: ≤ 2.25 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11.25 V ≥ 15 kΩ

■ Di6: Dry contact

Mechanical life: 2 × 10 cycles

∙Do1, Do2, Do3, Do4, Do5: Photo MOSFET relay

Rating: 200 V AC/DC @0.5 A (resistive load)

ON resistance: 2.1 Ω

Maximum frequency: 4 Hz @24 V, 10 mA

ON delay time: ≤ 5.0 msec.

(Pi6 is assigned to the same terminal.)

Common: Negative common

OFF delay time: ≤ 3.0 msec.

Sensing: Approx. 12 V DC, 12 mA

ON voltage/resistance: ≤ 2 V, ≤ 1.5 kΩ

OFF voltage/resistance: ≥ 11 V, ≥ 15 kΩ

[Table 1 (Thermocouple input)]

INSTALLATION

Power input

∙AC:

USABLE

RANGE (°C)

CONFORMANCE

RANGE (°C)

≤ 25 VA at 100 V AC

T/C

K (CA)

≤ 40 VA at 240 V AC

-272 to +1472

-272 to +1100

-260 to +1300

-272 to +500

24 to 1920

-150 to +1370

-170 to +1000

-180 to +1200

-170 to +400

1000 to 1760

380 to 1760

400 to 1760

100 to 2315

-130 to +1300

-200 to +600

-200 to +900

0 to 1395

•DC: ≤ 650 mA

E (CRC)

Operating temperature: -5 to +55°C (23 to 131°F)

Operating humidity: 5 to 90 %RH (non-condensing)

Mounting: Panel flush mounting (high-density mounting in

horizontal direction)

J (IC)

T (CC)

B (RH)

-100 to +1860

-52 to +2416

-272 to +1400

-252 to +700

-252 to +1000

-52 to +1496

-52 to +1860

Weight:

Approx. 1.8 kg (3.97 lb) for 250 mm depth type

Approx. 2.0 kg (4.41 lb) for 300 mm depth type

Approx. 2.5 kg (5.51 lb) for 400 mm depth type

C (WRe 5-26)

P (Platinel II)

PERFORMANCE

(PR)

300 to 1760

Accuracy

Overrange input (out of the usable range) is handled as burnout.

DC input: ±0.1 % ±1 digit

Thermocouple input: ±1℃ ±1 digit

±2℃ ±1 digit for B, R, S, C and PR

RTD input: ±1℃ ±1 digit

[Table 2 (RTD input)]

USABLE

RANGE (°C)

CONFORMANCE

RANGE (°C)

RTD

Pt 100 (JIS ’97, IEC

Pt 100 (JIS ’89)

JPt 100 (JIS ’89)

Pt 50Ω (JIS ’81)

Ni 100

)

-240 to +900

-236 to +560

-236 to +700

-100 to +252

-200 to +850

-200 to +660

-200 to +510

-200 to +649

-80 to +250

Potentiometer input: ±0.2 % ±1 digit

DC output: ±0.1 %

Precision resistor module (REM4): ±0.1 %

Cold junction compensation:

±2°C at 25°C ±10°C

Overrange input (out of the usable range) is handled as burnout.

±4°C for S, R and PR

Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 4/12

http://www.m-system.co.jp/

MODEL: SC200

DC input: ±0.015 %/°C (±0.008 %/°F)

Thermocouple input: ±0.015 %/°C (±0.008 %/°F)

RTD input: ±0.015 %/°C (±0.008 %/°F)

Potentiometer input: ±0.015 %/°C (±0.008 %/°F)

DC output: ±0.015 %/°C (±0.008 %/°F)

Precision resistor module (REM4): ±0.015 %/°C (±0.008

%/°F)

Line voltage effect: ±0.1 % over voltage range

Calendar clock accuracy: Monthly deviation 3 minutes at

25°C

RAM memory duration in power failure for hot start:

10 minutes assured

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength:

1500 V AC @ 1 minute

(Pv1 or supply output to Pv2 or Ai1 or Ai2 or Ai3 or Ai4 to

Di1 or Di2 or Di3 or Di4 or Di5 or Pi1 or Pi2 or Pi3 or Pi4 or

Pi5 to Di6 or Pi6 to Mv1 to Mv2 or Ao1 or Ao2 to Do1 to Do2

or Do3 or Do4 or Do5 or Do6 to NestBus to Modbus-RTU to

Modbus/TCP to power to FG)

500 V AC @ 1 minute (Pv2 to Ai1 or Ai2 or Ai3 or Ai4)

500 V AC @ 1 minute (Mv2 to Ao1 or Ao2)

500 V AC @ 1 minute (Do2 to Do3 to Do4 to Do5 to Do6)

500 V AC @ 1 minute (Pv1 to supply output)

STANDARDS & APPROVALS

EU conformity:

EMC Directive

EMI EN 61000-6-4

EMS EN 61000-6-2

Low Voltage Directive

EN 61010-1

Measurement Category II (contact output)

Installation Category II (power)

Pollution degree 2

Input or output to contact output – Basic insulation (300

Input or output to power - Reinforced insulation (300 V)

RoHS Directive

EN 50581

Protection against access to the terminal blocks:

Finger protection (VDE 0660-514)

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 5/12

http://www.m-system.co.jp/

MODEL: SC200

EXTERNAL VIEW

■ CONTROL MODULE FRONT VIEW

• Infrared communication type

• Stereo jack type

Auto/Man

1. TFT Color LCD with touch panel

Provides operation and engineering views to facilitate monitoring and setting

2. Infrared communication port

Used to communicate with PC via IRDA Communication Adaptor (model: COP-IRDA) to program and change parameters

using Loop Configuration Builder Software (model: SFEW3E) or PC Configurator Software (model: SCCFG)

3. MV value (DOWN) button

4. Acceleration button

(Accelerates MV signal’s changing speed by pressing simultaneously with MV value button)

5. MV value (UP) button

6. Auto / Man selector (changes the control mode for MV output)

7. Configurator jack and cap

Connects with a PC where Loop Configuration Builder Software (model: SFEW3E) or PC configurator software (model: SCCFG)

is installed via a PC configurator cable (model: COP-US) and enables programming and parameter setting

COMMUNICATION CABLE CONNECTIONS

■ NestBus

SML

This unit

■ Modbus-RTU

R2K-1

RS-485

This unit

RS-232-C

*1. Internal terminating resistor is used when the device is at the end of a transmission line.

*2. Install shield cables to all sections and ground them at single point.

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 6/12

http://www.m-system.co.jp/

MODEL: SC200

EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)

■ INFRARED COMMUNICATION TYPE

175 (6.89)

210 (8.27) max.

• ONE BLOCK TERMINAL

(without option /T)

RJ-45 CONNECTOR

52–M3.5 SCREW

MOUNTING BRACKETS

TERMINAL COVER

72 (2.83)

67.5 (2.66)

(.94)

• SEPARABLE TERMINAL

(with option /T)

*1. For Modbus/TCP only

*2. Standard model: 250 mm (9.84”)

300 mm (11.81”)

400 mm (15.75”)

Option /3:

Option /4:

RJ-45 CONNECTOR

52–M3.5 SCREW

4–M4 SCREW FOR

FIXING TERMINAL

67.5 (2.66)

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 7/12

http://www.m-system.co.jp/

MODEL: SC200

■ STEREO JACK TYPE

175 (6.89)

210 (8.27) max.

• ONE BLOCK TERMINAL

(without option /T)

RJ-45 CONNECTOR

52–M3.5 SCREW

MOUNTING BRACKETS

TERMINAL COVER

Jack cap

72 (2.83)

1 (.04)

67.5 (2.66)

(.94)

• SEPARABLE TERMINAL

(with option /T)

*1. For Modbus/TCP only

*2. Standard model: 250 mm (9.84”)

300 mm (11.81”)

400 mm (15.75”)

Option /3:

Option /4:

RJ-45 CONNECTOR

52–M3.5 SCREW

4–M4 SCREW FOR

FIXING TERMINAL

67.5 (2.66)

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 8/12

http://www.m-system.co.jp/

MODEL: SC200

MOUNTING REQUIREMENTS unit: mm

■ PANEL CUTOUT unit: mm

• Single mounting

• Clustered mounting

[68+72×(n - 1)] ⁺¹

68 ^+0.7

n = number of units

Panel thickness 2.3 – 20

■ Caution

• IP55 is ensured for the front panel of the unit mounted independently according to a panel. Test the sealing at the mounting

surface once the device is installed.

• Set the unit on a vertical surface with its operation buttons at the lower side. Mounting in other directions may cause heat

built up inside the unit and shorten its life span or degrade its performance.

• Ensure that there is sufficient space for ventilation inside a panel. Do not install above the devices that generate high heat

such as heaters, transformers or resistors. Leave at least 30 mm (1.2 inch) space above, below and behind the unit for

maintenance purpose (e.g. wiring, removing or installing).

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 9/12

http://www.m-system.co.jp/

MODEL: SC200

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

Note: In order to improve EMC performance, bond the FG terminal to ground.

Caution: FG terminal is NOT a protective conductor terminal.

Isolation

Shielded Twisted-pair Cable

40 T1

27 T2

28 T3

41 T4

To Other

NestBus

Devices

Discrete

Input

Circuit

Di 1 / Pi 1

Di 2 / Pi 2

Di 3 / Pi 3

Di 4 / Pi 4

Di 5 / Pi 5

–

Jumper*

SHLD

Shielded Twisted-pair Cable

Isolation

To Other

Modbus-RTU

Devices

–

14 T2

15 T3

–

Jumper*

SHLD

Isolation

Sensor

Excitation

SENSOR EXC

RJ-45 CONNECTOR Modbus/TCP

Di 6 / Pi 6

Isolation

Digital

Do 1

Input

Circuit

Computation

INPUT

COM

Isolation

Do 2

A1 42

B1 43

C1 44

A2 45

B2 46

C2 47

A/D

Converter

Pv 1

UNIVERSAL INPUT

Do 3

A/D

Converter

Do 4

Pv 2

UNIVERSAL INPUT

Do 5

A/D

Converter

Ai 1

Ai 2

Ai 3

Ai 4

Do 6

RUN CONTACT

Isolation

Output

Driver

Mv 1

–

Output

Driver

Isolation

Mv 2

Excitation

Supply

–

Output

Driver

2-WIRE TRANSMITTER

Ao 1

Ao 2

PC CONFIGURATOR/

BUILDER SOFTWARE

Output

Driver

Infrared Port / Jack

–

Display /

Setting

12 U(+)

13 V(–)

26 FG

POWER

*1. Close across the terminals 27 – 28 when the unit is located at the end of a transmission line (= no cross-wiring).

*2. Close across the terminals 14 – 15 when the unit is located at the end of a transmission line (= no cross-wiring).

■ DISCRETE INPUT PULSE

INPUT CONNECTION E.G.:

+12V

■ UNIVERSAL INPUT CONNECTION E.G.

POTENTIOMETER

max.

RTD

–

Dry contact

2-Wire

XMTR

T/C

1 or 2kΩ

–

VOLT / CURRENT

INPUT

–

min.

CJC SENSOR

*3. Connect input resistor module (model: REM4) for current input.

*4. Connect CJC sensor for thermocouple input.

*5. Connect input resistor module (model: REM4).

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 10/12

http://www.m-system.co.jp/

MODEL: SC200

SYSTEM CONFIGURATION EXAMPLES

■ SINGLE LOOP CONTROL

■ CASCADE CONTROL

Multi-Function PID Controller

Model: SC200

Multi-Function PID Controller

Model: SC200

Flow

Level

■ I/O EXPANDED VIA NESTBUS

NestBus

Multi-Function PID Controller

Model: SC200

Multi-Function PID Controller

Model: SC200

Remote I/O Module

Model: SML

PWR

RUN

■ CONTROL / SUPERVISION VIA MODBUS/TCP

SCADA System

Modbus/TCP

Ethernet Communication Adaptor

Model: 72EM2-M4

Multi-Function PID Controller

Model: SC200

ETHERNET

RS-485

RUN

SEND

FIELD

CNFG

Modbus-RTU

Multi-Function PID Controller

Model: SC200

Multi-Function PID Controller

Model: SC200

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 11/12

http://www.m-system.co.jp/

MODEL: SC200

■ CONTROL / SUPERVISION VIA MODBUS-RTU

SCADA System

RS-485/RS-232-C

Converter

Model: R2K-1

Modbus-RTU

Multi-Function PID Controller

Model: SC200

Multi-Function PID Controller

Model: SC200

Specifications are subject to change without notice.

SC200 SPECIFICATIONS

ES-6338 Rev.17 Page 12/12

http://www.m-system.co.jp/

SC200-11-M2 [MSYSTEM]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E