SC210W-12-M2/4 [MSYSTEM]
Single Loop Controller Series MULTI-FUNCTION PID CONTROLLER;
| 型号： | SC210W-12-M2/4 |
| 厂家： | 
M-SYSTEM |
| 描述： | Single Loop Controller Series MULTI-FUNCTION PID CONTROLLER |
| 文件： | 总13页 (文件大小：482K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: SC210W
/M2: 100 – 240 V AC (dual supply)
Single Loop Controller Series
(Operational voltage range 85 – 264 V AC; 50/60 Hz)
/R: 24 V DC (dual supply)
MULTI-FUNCTION PID CONTROLLER
(color LCD with touch-panel, MV output backup,
Modbus/NestBus communication,
(Operational voltage range 24 V DC ±10 %;
ripple 10 %p-p max.)
Control/Backup modules are powered from common terminals
with 'single' supply type; powered from independent
terminals with 'dual' supply type.
Language
expansion module function)
blank: Japanese
/E: English
(Language (Japanese or English) can be chosen by front
panel setting.)
144
(5.67)
Configurator Interface (must be specified)
/1: Stereo jack
*
mm (inch)
Terminal block (must be specified)
/T: Separable terminal
*Selectable with option code
Other Options
blank: none
/Q: Option other than the above (specify the specification)
MODEL: SC210W-[1][2]-[3][4]
SPECIFICATIONS OF OPTION: Q (multiple selections)
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
ORDERING INFORMATION
• Code number: SC210W-[1][2]-[3][4]
Specify a code from below for each of [1] through [4].
(e.g. SC210W-11-M2/3/M2/E/1/T/Q)
• Specify the specification for option code /Q
(e.g. /C01/S01)
/C02: Polyurethane coating
/C03: Rubber coating
TERMINAL SCREW MATERIAL
/S01: Stainless steel
[1] DISCRETE OUTPUT
1: Relay contact
FUNCTIONS & FEATURES
Functions & Features
2: Photo MOSFET relay
• Color LCD with touch panel
• Five Operation views (digital display, bargraph, dual-loop
bargraph, short trend and user's parameter table views)
• Enhanced Engineering views (configuration, programming,
tuning, and backup views)
[2] MODBUS
1: Modbus-RTU
2: Modbus/TCP
• Universal input x 2 points, analog input x 4 points,
discrete or pulse input x 6 points
[3] POWER INPUT
AC Power
• Current output (4-20 mA) x 2 points, voltage output (1-5
V) x 2 points, relay or photo-MOSFET relay output x 5 points
• RUN contact output (relay) x 1 point
M2: 100 – 240 V AC (Operational voltage range 85 – 264 V, 50/60 Hz)
DC Power
• Expandable I/O points by connecting remote I/O modules
via NestBus peer-to-peer communication
• Computation cycle selectable from 100 msec. to 3 sec.
(control cycle selectable from 1 to 64 times of the
computation cycle)
R: 24 V DC
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
[4] OPTIONS (multiple selections)
Housing Depth (must be specified)
/3: 300 mm
• Two PID function blocks
• Advanced computation and sequence control functions
• Auto-tuning function for automatically setting PID
parameters
/4: 400 mm
Backup Module Power Supply
blank: Single supply
• Parameter input and change with touch panel
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 1/13
http://www.m-system.co.jp/
MODEL: SC210W
• Loop Configuration Builder Software (model: SFEW3E) for
function parameter setting, list printing and data
downloading/uploading
Screw terminal
Terminal screws: Nickel-plated steel (standard) or stainless
steel
• PC Configurator Software (model: SCCFG) for exporting
short trend data (CSV), and storing/transferring display
parameter setting
Terminal fixing screws: Chrome-plated steel
Housing material: Flame-resistant resin (gray), steel
Isolation: Pv1 to Pv2 to supply output to Ai1 or Ai2 or Ai3 or
Ai4 to Di1 or Di2 or Di3 or Di4 or Di5 or Pi1 or Pi2 or Pi3 or
Pi4 or Pi5 to Di6 or Pi6 to Mv1 to Mv2 or Mv2B to Ao1 or Ao2
to Do1 to Do2 to Do3 to Do4 to Do5 to Do6 to NestBus to
Modbus-RTU to Modbus/TCP to power to backup module
power to FG
• Control and supervision by SCADA software via Modbus
TCP/IP or RTU communication
• Backup module (applicable to Mv2 only) is incorporated
for manual loading: MV output is automatically switched to
manual control in case of control module abnormality
• Independently powered and controlled backup module
• Easy extraction of control module at the front for
replacement while MV output is maintained
• Housing with selectable depth enabling use of existing
wires at replacement: 300 mm and 400 mm
• Separable terminal block
PID control: Single loop, cascade, advanced
Proportional band (P): 1 to 1000 %
Integral time (I): 0.01 to 100 minutes
Derivative time (D): 0.01 to 10 minutes
Auto-tuning: Limit cycle method
Alarm: PV high & low, deviation, rate of change
Computation: 48 functions blocks available for arithmetic
operations, time functions, signal selection, limit, alarm and
other functions
• Expansion of operations blocks due to Expansion module
Typical Applications
• Replacement of conventional controllers
• Panel operation for small-scale instrumentation
Sequence operation: Logic sequence and step sequence
(max. 1068 commands)
Computation cycle: 100 msec. to 3 sec. (control cycle
selectable among 1, 2, 4, 8, 16, 32 and 64 times of the
computation cycle)
RELATED PRODUCTS
• PC Configurator cable (model: COP-US)
• Loop configuration builder software (model: SFEW3E Ver.
1.101 or later)
MV output range: -15 - +115 %
Parameter setting: With touch panel or PC (Loop
Configuration Builder Software model: SFEW3E)
Self diagnostics: CPU monitoring with a watchdog timer
RUN contact: OFF in error detected by diagnostic (including
NestBus)
• PC configurator software (model: SCCFG Ver.1.84 or later)
Builder software and configurator software are
downloadable at M-System’s web site.
Short trend
ACCESSORIES
Storing interval: 1, 2, 5, 10, 20, 30 sec.,
1, 2, 5, 10, 30, 60 min.
• Precision resistor module (model: REM4): 2 units
• Cold junction compensation sensor: 2 pcs
• Mounting brackets: 2 pcs
Capacity: 400 points (display 200 points)
• Connector adapter: 1 pce
■ Display
(The jack on the unit and the plug of PC Configurator cable
(not included in the product) are different in size.)
Display device: 4.3-inch TFT LCD
Display colors: 256
Resolution: 480 × 272 pixels
Pixel pitch: 0.198 × 0.198 mm (128 × 128 DPI)
Backlight: LED
GENERAL SPECIFICATIONS
Construction: Panel flush mounting
Backlight life: Approx. 50 000 hours (at 50 % brightness)
Note: The backlight can be replaced in M-System factory.
The LCD must be replaced at the same time.
Screen saver standby time: 1 to 99 minutes
Scaling range: -32000 to +32000
Degree of protection: IP55; ensured for the front panel of
the unit independently mounted to a panel
Connection
Terminal screws: M3.5 screw terminals (torque 1.0 N·m)
Terminal fixing screws: M4 screw terminals
(torque 1.2 N·m)
Decimal point position: 10-1, 10-2, 10-3, 10-4, 10-5 or none
Scale divisions: 2 to 10
Backup module power supply terminal (option /M2, /R):
Engineering unit indication: Max. 8 characters
Auto/Man indicator: Green/Amber LED
Backup mode MV output setting indicator: Blue LED
Euro terminal block (wire dia. 2.4 max., 0.5 – 2.5 mm
2,
stripped length 10 mm)
Ethernet: RJ-45 Modular Jack
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 2/13
http://www.m-system.co.jp/
MODEL: SC210W
MV output setting indicator: Blue LED
Data link layer: 10BASE-T / 100BASE-TX
Transfer rate: 10 / 100 Mbps, Auto Negotiation
Protocol: Modbus/TCP
FACTORY DEFAULT
Data: RTU (binary)
■ LOOP 1
Connections: 2
P : 100%
Transmission media:
I : No integral action
D : No derivative action
CAS
10BASE-T (STP cable, category 5)
100BASE-TX (STP cable, category 5e)
Max. segment length: 100 meters
Port number: 502
H
PID
G02
L
SEQ
G81
Reverse Action
Ai 1
Pv 1
Mv 1
(PV /MV
)
IP address: 192.168.0.1 (factory setting)
1
1
*
*
1 – 5 V DC
1 – 5 V DC
4 – 20 mA DC
AL1
AL2
SUPPLY OUTPUT
Output voltage:
■ LOOP 2
24 V DC ±10 % with no load
18 V DC min. at 20 mA
Current rating: ≤ 22 mA DC
∙Shortcircuit protection
Current limited: Approx. 30 mA
P : 100%
: No integral action
D : No derivative action
I
CAS
H
L
PID
G03
SEQ
G81
Reverse Action
Ai 2
Pv 2
Mv 2
(PV /MV
)
1
1
*
*
1 – 5 V DC
1 – 5 V DC
4 – 20 mA DC
INPUT SPECIFICATIONS
■ Pv1, Pv2 (universal input)
AL3
AL4
∙Current input: 4 – 20 mA DC with input resistance 250 Ω
(REM4)
*1. Factory default setting
Use Loop Configuration Builder Software (model: SFEW3E)
to modify setting.
∙Voltage input: -10 – +10 V DC
-1 – +1 V DC
0 – 10 V DC
EXTERNAL INTERFACE
■ NestBus
1 – 5 V DC
0 – 1 V DC
Configuration: Bus type multi-drop
Standard: Conforms to TIA/EIA-485-A
Transfer rate: 19.2 kbps
Input resistance: ≥ 1 MΩ
∙Thermocouple input: K, E, J, T, B, R, S, C, N, U, L, P, PR (See
Table 1)
Protocol: NestBus (M-System’s own protocol)
Max. transmission distance: 1 kilometer
Transmission media:
Input resistance: ≥ 30 kΩ
Burnout sensing: ≤ 0.3 µA
Burnout indication: 115 % of the measuring range (upscale)
∙RTD input: Pt100 (JIS ’97, IEC), Pt100 (JIS ’89), JPt100 (JIS
’89), Pt50Ω (JIS ’81), Ni100 (See Table 2)
Maximum lead wire resistance: 100 Ω per wire
Burnout indication: 115 % of the measuring range (upscale)
Sensing current: ≤ 1 mA
Shielded twisted-pair cable (CPEV-S 0.9 dia.)
Terminating resistor: incorporated
Card No. setting: 0 - F (16 cards; 2 assigned for one unit)
■ Modbus-RTU
Configuration: Half-duplex, asynchronous, no procedure
Standard: Conforms to TIA/EIA-485-A
Max. transmission distance: 500 meters
Transfer rate: 4800, 9600, 19.2 k, 38.4 k bps
Data bit: 8
∙Potentiometer input: Total resistance 100 Ω to 10 kΩ
Minimum span: 50 % of total resistance
Excitation: ≤ 0.6 V DC
■ Ai1, Ai2, Ai3, Ai4
Parity bit: Odd, even, none
∙Voltage input: 1 – 5 V DC
Max. node number: 15 (except the master)
Transmission media:
Input resistance: ≥ 1 MΩ
■ Pi1, Pi2, Pi3, Pi4, Pi5: Dry contact
(Di1 through Di5 are assigned to the same terminals
respectively.)
Shielded twisted-pair cable (CPEV-S 0.9 dia.)
Terminating resistor: incorporated
Node address setting: 1 - 247
Maximum frequency: 20 Hz
■ Modbus/TCP (Ethernet)
Minimum pulse width: 25 msec.
Physical layer standard: IEEE 802.3u
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 3/13
http://www.m-system.co.jp/
MODEL: SC210W
Common: Negative common per 5 points
Sensing: Approx. 12 V DC, 6 mA
ON voltage/resistance: ≤ 2.25 V, ≤ 1.5 kΩ
OFF voltage/resistance: ≥ 11.25 V ≥ 15 kΩ
■ Pi6: Dry contact
OUTPUT SPECIFICATIONS
■ Mv1, Mv2, Mv2B
∙Current output: 4 – 20 mA DC
Load resistance: ≤ 600 Ω
(Mv2B is the output from backup unit.)
■ Ao1, Ao2
(Di6 is assigned to the same terminal.)
Maximum frequency: 10 kHz
∙Voltage output: 1 – 5 V DC
Load resistance: ≥ 10 kΩ
Minimum pulse width: 0.05 msec.
Common: Negative common
■ Discrete Output
Sensing: Approx. 12 V DC, 12 mA
ON voltage/resistance: ≤ 2 V, ≤ 1.5 kΩ
OFF voltage/resistance: ≥ 11 V, ≥ 15 kΩ
Excitation: 12 V DC ±10%, 15 mA
Current limiting circuit: Approx. 30 mA
■ Di1, Di2, Di3, Di4, Di5: Dry contact
(Pi1 through Pi5 are assigned to the same terminals
respectively.)
∙Do1, Do2, Do3, Do4, Do5, RUN contact (Do6): Relay
contact
Rated load: 250 V AC @1 A (cos ø = 1)
30 V DC @1 A (resistive load)
Maximum switching voltage: 250 V AC or 30 V DC
Maximum switching power: 250 VA or 60 W
Minimum load: 5 V DC @10 mA
Mechanical life: 2 × 10 cycles
7
Common: Negative common per 5 points
Sensing: Approx. 12 V DC, 6 mA
ON voltage/resistance: ≤ 2.25 V, ≤ 1.5 kΩ
OFF voltage/resistance: ≥ 11.25 V ≥ 15 kΩ
■ Di6: Dry contact
∙Do1, Do2, Do3, Do4, Do5: Photo MOSFET relay
Rating: 200 V AC/DC @0.5 A (resistive load)
ON resistance: 2.1 Ω
Maximum frequency: 4 Hz @24 V, 10 mA
ON delay time: ≤ 5.0 msec.
(Pi6 is assigned to the same terminal.)
Common: Negative common
OFF delay time: ≤ 3.0 msec.
Sensing: Approx. 12 V DC, 12 mA
ON voltage/resistance: ≤ 2 V, ≤ 1.5 kΩ
OFF voltage/resistance: ≥ 11 V, ≥ 15 kΩ
[Table 1 (Thermocouple input)]
INSTALLATION
Power input
∙AC:
Control module
USABLE
RANGE (°C)
CONFORMANCE
RANGE (°C)
≤ 25 VA at 100 V AC
T/C
K (CA)
≤ 40 VA at 240 V AC
-272 to +1472
-272 to +1100
-260 to +1300
-272 to +500
24 to 1920
-150 to +1370
-170 to +1000
-180 to +1200
-170 to +400
1000 to 1760
380 to 1760
400 to 1760
100 to 2315
-130 to +1300
-200 to +600
-200 to +900
0 to 1395
Backup module
E (CRC)
≤ 10 VA at 100 V AC
J (IC)
≤ 15 VA at 240 V AC
T (CC)
•DC
B (RH)
Control module: ≤ 650 mA
Backup module: ≤ 150 mA
Operating temperature: -5 to +55°C (23 to 131°F)
Operating humidity: 5 to 90 %RH (non-condensing)
Mounting: Panel flush mounting (high-density mounting in
horizontal direction)
R
-100 to +1860
-100 to +1860
-52 to +2416
-272 to +1400
-252 to +700
-252 to +1000
-52 to +1496
-52 to +1860
S
C (WRe 5-26)
N
U
L
P (Platinel II)
Weight:
(PR)
300 to 1760
Approx. 2.0 kg (4.41 lb) for 300 mm depth type
Approx. 2.5 kg (5.51 lb) for 400 mm depth type
Overrange input (out of the usable range) is handled as burnout.
[Table 2 (RTD input)]
USABLE
RANGE (°C)
CONFORMANCE
RANGE (°C)
PERFORMANCE
Accuracy
RTD
Pt 100 (JIS ’97, IEC
Pt 100 (JIS ’89)
JPt 100 (JIS ’89)
Pt 50Ω (JIS ’81)
Ni 100
)
-240 to +900
-240 to +900
-236 to +560
-236 to +700
-100 to +252
-200 to +850
-200 to +660
-200 to +510
-200 to +649
-80 to +250
DC input: ±0.1 % ±1 digit
Thermocouple input: ±1℃ ±1 digit
±2℃ ±1 digit for B, R, S, C and PR
RTD input: ±1℃ ±1 digit
Potentiometer input: ±0.2 % ±1 digit
Overrange input (out of the usable range) is handled as burnout.
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 4/13
http://www.m-system.co.jp/
MODEL: SC210W
DC output: ±0.1 %
Precision resistor module (REM4): ±0.1 %
Cold junction compensation:
±2°C at 25°C ±10°C
±4°C for S, R and PR
Temp. coefficient: ±0.015 %/°C (±0.008 %/°F)
DC input: ±0.015 %/°C (±0.008 %/°F)
Thermocouple input: ±0.015 %/°C (±0.008 %/°F)
RTD input: ±0.015 %/°C (±0.008 %/°F)
Potentiometer input: ±0.015 %/°C (±0.008 %/°F)
DC output: ±0.015 %/°C (±0.008 %/°F)
Precision resistor module (REM4): ±0.015 %/°C (±0.008
%/°F)
Line voltage effect: ±0.1 % over voltage range
Calendar clock accuracy: Monthly deviation 3 minutes at
25°C
RAM memory duration in power failure for hot start:
10 minutes assured
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength:
1500 V AC @ 1 minute
(Pv1 or supply output to Pv2 or Ai1 or Ai2 or Ai3 or Ai4 to
Di1 or Di2 or Di3 or Di4 or Di5 or Pi1 or Pi2 or Pi3 or Pi4 or
Pi5 to Di6 or Pi6 to Mv1 to Mv2 or Mv2B or Ao1 or Ao2 to
Do1 to Do2 or Do3 or Do4 or Do5 or Do6 to NestBus to
Modbus-RTU to Modbus/TCP to power to backup module
power to FG)
500 V AC @ 1 minute (Pv2 to Ai1 or Ai2 or Ai3 or Ai4)
500 V AC @ 1 minute (Mv2 or Mv2B to Ao1 or Ao2)
500 V AC @ 1 minute (Do2 to Do3 to Do4 to Do5 to Do6)
500 V AC @ 1 minute (Pv1 to supply output)
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 5/13
http://www.m-system.co.jp/
MODEL: SC210W
EXTERNAL VIEW
■ CONTROL MODULE FRONT VIEW
1
2
Auto/Man
3
4
5
7
6
1. TFT Color LCD with touch panel
Provides operation and engineering views to facilitate monitoring and setting
2. MV output setting indicator LEDs for the backup mode
3. Configurator jack and cap
Connects with a PC where Loop Configuration Builder Software (model: SFEW3E) or PC configurator software (model: SCCFG)
is installed via a PC configurator cable (model: COP-US) and enables programming and parameter setting
4. MV value (DOWN) button
5. Acceleration button
(Accelerates MV signal’s changing speed by pressing simultaneously with MV value button)
6. MV value (UP) button
7. Auto / Man selector (changes the control mode for MV output)
■ BACKUP MODULE
8
9
10
11
8. MV output setting indicators
9. MV value (UP) button
10. Acceleration button
(Accelerates MV signal’s changing speed by pressing simultaneously with MV value button)
11. MV value (DOWN) button
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 6/13
http://www.m-system.co.jp/
MODEL: SC210W
COMMUNICATION CABLE CONNECTIONS
■ NestBus
SML
T1
SML
T1
SC210W
T1
T2
T2
T2
*1
*1
T3
T3
T3
FG
T4
T4
*2
FG
■ Modbus-RTU
R2K-1
RS-485
RS-485
SC210W
T1
SC210W
T1
T2
T3
T4
T1
RS-232-C
T2
T2
*1
*1
T3
T3
FG
FG
*2
FG
*1. Internal terminating resistor is used when the device is at the end of a transmission line.
*2. For noise protection, connect all shielded cables with each other and ground them at a single dedicated ground point within
the system with grounding resistance of 100 Ω or less. Note that the most suitable ground point differs depending on the system.
Also note that there may be cases where less noise is caused when the shields are left ungrounded.
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 7/13
http://www.m-system.co.jp/
MODEL: SC210W
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
1
*
BACKUP MODULE POWER INPUT TERMINAL
175 (6.89)
210 (8.27) max.
2
*
RJ-45 CONNECTOR
52–M3.5 SCREW
MOUNTING BRACKETS
TERMINAL COVER
80 (3.15)
4–M4 SCREW FOR
FIXING TERMINAL
60 61 62 63
14
1
40
41
42
43
44
45
46
47
48
49
50
51
52
27
28
29
30
31
32
33
34
35
36
37
38
39
15
2
16
3
17
4
18
5
19
6
20
7
21
8
22
9
23
10
24
11
25
12
26
13
Jack cap
72 (2.83)
24
*3
1 (.04)
67.5 (2.66)
(.94)
*1. Option /M2, /R only
*2. For Modbus/TCP only
*3. Option /3: 300 mm (11.81”)
Option /4: 400 mm (15.75”)
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 8/13
http://www.m-system.co.jp/
MODEL: SC210W
MOUNTING REQUIREMENTS unit: mm
■ PANEL CUTOUT unit: mm
• Single mounting
• Clustered mounting
68 +0.7
0
[68+72×(n - 1)] +1
0
n = number of units
Panel thickness 2.3 – 20
■ Caution
• IP55 is ensured for the front panel of the unit independently mounted to a panel. Securely seal the mounting surface along
the panel cutout once the unit is installed.
• Set the unit on a vertical surface with its operation buttons at the lower side. Mounting in other directions may cause heat
built up inside the unit and shorten its life span or degrade its performance.
• Ensure that there is sufficient space for ventilation inside the panel. Do not install above the devices that generate high heat
such as heaters, transformers or resistors. Leave at least 30 mm (1.2 inch) space above, below and behind the unit for
maintenance purpose (e.g. wiring, removing or installing).
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 9/13
http://www.m-system.co.jp/
MODEL: SC210W
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
■ BACKUP MODULE POWER SUPPLY: SINGLE SUPPLY
Backup Module
Control Module
Isolation
Isolation
Shielded Twisted-pair Cable
+
40 T1
27 T2
28 T3
41 T4
26 FG
To Other
NestBus
Devices
+
+
+
+
34
35
36
37
Discrete
Input
Circuit
Di 1 / Pi 1
Di 2 / Pi 2
Di 3 / Pi 3
Di 4 / Pi 4
Di 5 / Pi 5
–
1
Jumper*
SHLD
SHLD
Isolation
+
1
T1
To Other
Modbus-RTU
Devices
+
–
38
39
–
14 T2
15 T3
Shielded Twisted-pair Cable
2
Jumper*
Isolation
Sensor
Excitation
SENSOR EXC
31
2
T4
Isolation
Di 6 / Pi 6
RJ-45 CONNECTOR Modbus/TCP
Digital
Input
Circuit
Computation
INPUT
COM
32
33
16
Do 1
17
Isolation
Isolation
Isolation
A1 42
B1 43
C1 44
A2 45
B2 46
C2 47
18
A/D
Converter
Do 2
Pv 1
UNIVERSAL INPUT
19
20
Do 3
21
A/D
Converter
Pv 2
UNIVERSAL INPUT
22
Do 4
23
+
+
+
48
49
50
24
A/D
Converter
Ai 1
Ai 2
Ai 3
Ai 4
Do 5
25
10
Do 6
RUN CONTACT
11
Isolation
Isolation
Isolation
Output
Driver
+
–
+
–
+
–
+
51
52
3
4
5
6
7
Mv 1
Isolation
Output
Driver
Excitation
Supply
3
+
–
29
30
*
Mv 2, Mv 2B
2-WIRE TRANSMITTER
Output
Driver
PC CONFIGURATOR/
BUILDER SOFTWARE
Ao 1
Ao 2
Jack
Output
Driver
+
–
8
9
Display /
Setting
12 U(+)
13 V(–)
POWER
MV SETTING
INDICATORS
Isolation
Digital
Computation
Output
Driver
Output
Switch
OPERATION BUTTONS
Backup Module
Power Circuit
*1. Close across the terminals 27 – 28 when the unit is located at the end of a transmission line (= no cross-wiring).
*2. Close across the terminals 14 – 15 when the unit is located at the end of a transmission line (= no cross-wiring).
*3. Backup is applicable to Mv 2 only. Mv 2B is output of the backup module.
■ UNIVERSAL INPUT CONNECTION E.G.
■ DISCRETE INPUT PULSE
POTENTIOMETER
max.
INPUT CONNECTION E.G.:
RTD
+12V
A
B
B
3
2
1
+
+
–
+
–
A
A
B
A
B
C
A
B
C
29
30
A
2-Wire
XMTR
T/C
Dry contact
*4
1 or 2kΩ
+
–
+
B
C
VOLT / CURRENT
INPUT
+
–
R
–
–
C
min.
CJC SENSOR
B
*5
*6
R
*4. Connect input resistor module (model: REM4) for current input.
*5. Connect CJC sensor for thermocouple input.
C
*6. Connect input resistor module (model: REM4).
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 10/13
http://www.m-system.co.jp/
MODEL: SC210W
■ BACKUP MODULE POWER SUPPLY: DUAL SUPPLY
Backup Module
Control Module
Isolation
Isolation
Shielded Twisted-pair Cable
+
40 T1
27 T2
28 T3
41 T4
26 FG
To Other
NestBus
Devices
+
+
+
+
34
35
36
37
Discrete
Input
Circuit
Di 1 / Pi 1
Di 2 / Pi 2
Di 3 / Pi 3
Di 4 / Pi 4
Di 5 / Pi 5
–
1
Jumper*
SHLD
SHLD
Isolation
+
1
T1
To Other
Modbus-RTU
Devices
+
–
38
39
–
14 T2
15 T3
Shielded Twisted-pair Cable
2
Jumper*
Isolation
Sensor
Excitation
SENSOR EXC
31
2
T4
Di 6 / Pi 6
RJ-45 CONNECTOR Modbus/TCP
Digital
Input
Circuit
Computation
INPUT
COM
Isolation
32
33
16
Do 1
17
Isolation
Isolation
Isolation
A1 42
B1 43
C1 44
A2 45
B2 46
C2 47
18
A/D
Converter
Do 2
Pv 1
UNIVERSAL INPUT
19
20
Do 3
21
A/D
Converter
Pv 2
UNIVERSAL INPUT
22
Do 4
23
+
+
+
48
49
50
24
A/D
Converter
Ai 1
Ai 2
Ai 3
Ai 4
Do 5
25
10
Do 6
RUN CONTACT
11
Isolation
Isolation
Isolation
Output
Driver
+
–
+
–
+
–
+
51
52
3
4
5
6
7
Mv 1
Isolation
Output
Driver
Excitation
Supply
3
*
+
–
29
30
Mv 2, Mv 2B
2-WIRE TRANSMITTER
Output
Driver
Ao 1
Ao 2
PC CONFIGURATOR/
BUILDER SOFTWARE
Jack
Output
Driver
+
–
8
9
Display /
Setting
12 U(+)
13 V(–)
POWER
MV SETTING
INDICATORS
Isolation
62
Digital
Computation
Output
Driver
Output
Switch
63 FG
60 U(+)
61 V(–)
OPERATION BUTTONS
Backup Module
Power Circuit
BACK UP POWER
*1. Close across the terminals 27 – 28 when the unit is located at the end of a transmission line (= no cross-wiring).
*2. Close across the terminals 14 – 15 when the unit is located at the end of a transmission line (= no cross-wiring).
*3. Backup is applicable to Mv 2 only. Mv 2B is output of the backup module.
■ UNIVERSAL INPUT CONNECTION E.G.
■ DISCRETE INPUT PULSE
POTENTIOMETER
max.
INPUT CONNECTION E.G.:
RTD
+12V
A
B
B
3
2
1
+
+
–
+
–
A
A
B
A
B
C
A
B
C
29
30
A
2-Wire
XMTR
T/C
Dry contact
*4
1 or 2kΩ
+
–
+
B
C
VOLT / CURRENT
INPUT
+
–
R
–
–
C
min.
CJC SENSOR
B
*5
*6
R
*4. Connect input resistor module (model: REM4) for current input.
*5. Connect CJC sensor for thermocouple input.
C
*6. Connect input resistor module (model: REM4).
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 11/13
http://www.m-system.co.jp/
MODEL: SC210W
SYSTEM CONFIGURATION EXAMPLES
■ SINGLE LOOP CONTROL
■ CASCADE CONTROL
Multi-Function PID Controller
Model: SC210W
Multi-Function PID Controller
Model: SC210W
Ai
PV
PV
MV
MV
Flow
Level
■ I/O EXPANDED VIA NESTBUS
NestBus
Multi-Function PID Controller
Model: SC210W
Multi-Function PID Controller
Model: SC210
Remote I/O Module
Model: SML
PWR
RUN
PV
PV
MV
MV
■ CONTROL / SUPERVISION VIA MODBUS/TCP
SCADA System
Modbus/TCP
Ethernet Communication Adaptor
Model: GR8-EM
Multi-Function PID Controller
Model: SC210W
PV
MV
Modbus-RTU
Multi-Function PID Controller
Model: SC210W
Multi-Function PID Controller
Model: SC210
PV
PV
MV
MV
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 12/13
http://www.m-system.co.jp/
MODEL: SC210W
■ CONTROL / SUPERVISION VIA MODUBS-RTU
SCADA System
RS-485/RS-232-C
Converter
Model: R2K-1
Modbus-RTU
Multi-Function PID Controller
Model: SC210W
Multi-Function PID Controller
Model: SC210
PV
PV
MV
MV
Specifications are subject to change without notice.
SC210W SPECIFICATIONS
ES-6347 Rev.0 Page 13/13
http://www.m-system.co.jp/
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明