WL40EW2VN-R/E [MSYSTEM]

Wireless I/O WL40VN Series;


型号：	WL40EW2VN-R/E
厂家：	M-SYSTEM
描述：	Wireless I/O WL40VN Series 无线
文件：	总6页 (文件大小：574K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

MODEL: WL40EW2VN

Wireless I/O WL40VN Series

FUNCTIONS & FEATURES

This unit

• Incorporates 920MHz band wireless module with RS-485

transparent type, which can communicate using Modbus-

RTU protocol.

WIRELESS GATEWAY

(Modbus/TCP, Modbus-RTU Transparent 920MHz Band

Wireless Device (parent device) for Vietnam)

• Converts Modbus-RTU (RS-485) and Modbus/TCP

(Ethernet) protocol.

For use in Vietnam only.

60 (2.36)

RELATED PRODUCTS

For related products of wireless device, refer to M-System's

web site.

[260

(10.24)]

Maintenance software

Maintenance console: MH920 Console International (model:

MH920CI) (OKI)

155 (6.10)

(Maintenance software is downloadable at M-System’s web

site.)

mm (inch)

Coaxial cable

• 7.5 m extension cable for rooftop antenna (model: CX-

SAC0SAD0Q0750) (OKI)

MODEL: WL40EW2VN-[1][2]

Using 7.5 m coaxial cable for extension decreases

transmission distance.

ORDERING INFORMATION

• Code number: WL40EW2VN-[1][2]

Specify a code from below for each of [1] and [2].

(e.g. WL40EW2VN-R/E/Q)

GENERAL SPECIFICATIONS

Connection

• Specify the specification for option code /Q

(e.g. /C01)

Wireless network: SMA coaxial connector

Power supply: Tension clamp (Front Twinconnection)

Applicable wire size: 0.2 - 2.5 mm2, stripped length 10 mm

Ethernet: RJ-45 Modular Jack

[1] POWER INPUT

Maintenance: Mini USB type B female connector

Housing material: Flame-resistant resin

Isolation: Power supply to Ethernet or FE1 to antenna

connector

DC Power

S: 12 V DC

(Operational voltage range 12 V ±10 %, ripple 10 %p-p max.)

R: 24 V DC

Switch: IP Reset

(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)

Refer to the instruction manual for details.

Indicator LED: Power

[2] OPTIONS (multiple selections)

Antenna

/S: Sleeve antenna

/E: Rooftop antenna

Other Options

blank: none

/Q: Option other than the above (specify the specification)

SPECIFICATIONS OF OPTION: Q

COATING (For the detail, refer to M-System's web site.)

/C01: Silicone coating

/C02: Polyurethane coating

/C03: Rubber coating

WL40EW2VN SPECIFICATIONS

ES-9117 Rev.0 Page 1/6

http://www.m-system.co.jp/

MODEL: WL40EW2VN

Operating temperature: -20 to +60°C (-4 to +140°F)

Operating humidity: 10 to 90 %RH (non-condensing)

Atmosphere: No corrosive gas or heavy dust

Mounting: DIN rail

COMMUNICATION

■ Common spec.

Modbus protocol

Protocol: Modbus/TCP

Data: RTU (Binary)

Weight

Unit: Approx. 270 g (0.60 lb)

Port No.: 502

Sleeve antenna (standard): 27 g (0.95 oz)

Rooftop antenna: 52 g (1.83 oz)

Max. number of socket connections: 8

IP address: 192.168.0.1

(factory setting; can be changed via web browser)

■ Ethernet

PERFORMANCE

Communication Standard: IEEE 802.3u

Transmission: 10BASE-T, 100BASE-TX

Baud rate: 10/100 Mbps (Auto Negotiation function)

Transmission media: 10BASE-T (STP, Category 5) 100BASE-

TX (STP, Category 5e)

Insulation resistance: ≥ 100 MΩ with 500 V DC

Dielectric strength: 1500 V AC @ 1 minute

(power input to Ethernet or FE1 to antenna connector)

STANDARDS & APPROVALS

QCVN 47: 2015 / BTTTT

Max. length of fieldbus segment: 100 meters

Ethernet indicator LED: Link, Link100

QCVN 96: 2015 / BTTTT

WIRELESS SPECIFICATIONS

Communication Standard: IEEE 802.15.4g

Frequency: 920MHz band (918.4 - 922.4 MHz)

Max. Transmission power: 20mW

Bandwidth: 400 kHz

Modulation: GFSK

Baud rate: Max. 100 kbps

Channels: 1 to 7ch

Security: 128bit AES

Indicator LEDs: 920Run, 920Link

Number of child devices: Max. 100

Protocol: Modbus-RTU

Communication module: Coordinator module incorporated

(Oki Electric Industry Co., Ltd. )

Radio parameters setting: by Web browser

Max. transmission distance (optical): Approx. 1 km

Antenna

•Sleeve antenna (Model: MH920-ANT-F (S))

Indoor use

Non-waterproof

Non-directional

Gain: 3.0dBi max.

•Rooftop antenna (Model: MH920-ANT-F (R))

Outdoor/indoor use

Cable length: 2.5 m

Waterproof performance: IPx6 (except connector)

Non-directional

Gain: 2.0dBi max.

INSTALLATION

Current consumption:

24 V DC: ≤ 90 mA

12 V DC: ≤170 mA

WL40EW2VN SPECIFICATIONS

ES-9117 Rev.0 Page 2/6

http://www.m-system.co.jp/

MODEL: WL40EW2VN

WEB BROWSER SETTING

With Web browser, settings shown below are available.

Refer to the operating manual (EM-9115-B) for detailed settings.

■ TCP / IP SETTING

ITEM

SETTING RANGE

DEFAULT

192.168.0.1

255.255.255.0

0.0.0.0

IP address

Subnet mask

Default gateway

1.0.0.0 – 223.255.255.255

224.0.0.0 – 255.255.255.255

0.0.0.0 – 255.255.255.255

■ MODBUS / TCP SETTING

ITEM

SETTING RANGE

1 – 65535

DEFAULT

Port

502

Modbus exception response

Not return 06 (BUSY), 0B (ERROR) /

Return 06 (BUSY), 0B (ERROR)

Communication timeout

1 – 60 (min.)

1 (min.)

■ WIRELESS SETTING

ITEM

SETTING RANGE

DEFAULT

0000

PAN ID (group number)

Radio channel number

Network name

0000 – FFFE (hexadecimal, 4 digits)

1 – 7 ch

1 ch

English one-byte characters within 16 characters

(one-byte space, “-”, “_”, “.”, “@” are usable.)

MH920

Encryption key

0000...0 – FFFF...F

(hexadecimal, 32 digits)

0000...0

Pre!x

2000:0000:0000:0000 – 3FFF:FFFF:FFFF:FFFF

10 – 3600 (sec.)

2000:0000:0000:0000

1800 (sec.)

Monitoring unit time of 1% duty (sec.)

Transmitter power output

0.16mW / 1mW / 20mW

20mW

Device type in a network,

Number of devices in a network

Child (!xed), 1 to 30 devices /

Child (!xed), 31 to 60 devices /

Child (!xed), 61 to 100 devices /

Child (!xed) + child (moving)

Child (!xed), 1 to 30 devices

Set network quality

Standard (recommended) /

Frequency of route switching and delay (higher) /

Frequency of route switching and delay (highest)

Standard (recommended)

Network join mode

V3-compatible mode / Fast join mode

None / Yes (polling type)

V3-compatible mode

Yes (polling type)

4.0 (sec.)

Packet !ltering

Filter timeout on polling

Setting mode of short address

1.0 – 60.0 (sec.)

Range mode: 1 device (max. multi drop number)

List mode

Range mode: 1 to 4 devices (max. multi drop number)

Range mode: 1 to 8 devices (max. multi drop number)

Range mode: 1 to 16 devices (max. multi drop number)

Range mode: 1 to 31 devices (max. multi drop number)

List mode

920Run timeout

0.0 – 3200.0 (sec.)

Once / Twice / Three times

Short address

5.0 (sec.)

Retry times before route switching

Short address list setting

MAC address list setting

Connection refusal list setting

Three times

—

MAC address

Note: For version confirmation of communication module, refer to the operating manual (EM-9115-B).

WL40EW2VN SPECIFICATIONS

ES-9117 Rev.0 Page 3/6

http://www.m-system.co.jp/

MODEL: WL40EW2VN

EXTERNAL VIEW

■ FRONT VIEW

Status Indicator LED

Antenna Connector

Power

Link

Link100

920Link

920Run

Network Status Indicator LED

Maintenance Connector

CFG

Ethernet

RJ-45 Modular jack

Reset Switch

24V

FE1

IP Reset

Connector for Power Input *

* Power input defers depending on the power input code you select.

TERMINAL ASSIGNMENTS

■ CONNECTORS FOR POWER INPUT

Unit side connector: MSTBV2,5/5-GF-5,08AU (Phoenix Contact)

Cable side connector: TFKC2,5/5-STF-5,08AU (Phoenix Contact)

• Power input code: R (24 V DC)

• Power input code: S (12 V DC)

24V

FUNCTION

12V

FUNCTION

Power input 24 V

Power input 0 V

Not used

Power input 12 V

Power input 0 V

Not used

24V

12V

FE1

Not used

Power input earth

MODBUS FUNCTION CODES & SUPPORTED CODES

Modbus function codes are shown below.

■ DATA AND CONTROL FUNCTIONS

CODE

NAME

Read Coil Status

Digital output from the slave (read/write)

Read Input Status

Read Holding Registers

Read Input Registers

Force Single Coil

Status of digital inputs to the slave (read only)

General purpose register within the slave (read/write)

Collected data from the !eld by the slave (read only)

Digital output from the slave (read/write)

Preset Single Register

Force Multiple Coils

Preset Multiple Registers

General purpose register within the slave (read/write)

Digital output from the slave (read/write)

General purpose register within the slave (read/write)

■ EXCEPTION CODES

CODE

NAME

Slave Device Busy

Device’s Modbus/TCP request queue is full.

Gateway Target Device Failed To Respond

Response from 920MHz band wireless device (child) is error, or response

timeout occurred.

Note: When 920 MHz band wireless device (child) returns an exception code other than the above, the exception code is directly transmit-

ted to upper devices.

WL40EW2VN SPECIFICATIONS

ES-9117 Rev.0 Page 4/6

http://www.m-system.co.jp/

MODEL: WL40EW2VN

EXTERNAL DIMENSIONS unit: mm (inch)

• With sleeve antenna

DIN RAIL

35mm wide

60 (2.36)

45 (1.77)

107 (4.21)

3 (.12)

[200 (7.87)]

• With rooftop antenna

ø3 (.12)

ø1.2 (.05)

8 (.31) Hex.

DIN RAIL

35mm wide

ø27

approx. 2500 (98.4)

(1.06)

107 (4.21)

(.79)

3 (.12)

WL40EW2VN SPECIFICATIONS

ES-9117 Rev.0 Page 5/6

http://www.m-system.co.jp/

MODEL: WL40EW2VN

SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM

LED

Isolation

Two-way

wireless circuit

Communication

Circuit

To Other

Ethernet Devices

Antenna Connector

USB Connector

RJ-45 Modular Jack

24V

Maintenance

Connector

Power Input

Control

Circuit

FE1

Reset Switch

* Power input defers depending on the power input code you select.

SYSTEM CONFIGURATION EXAMPLES

PC side as Modbus/Master communicates with child devices via wireless module using Modbus/TCP and RTU protocol,

and also communicates with slave devices in multi drop connection (RS-485).

LAN cable

(STP cable)

RS-485

Slave Device

MAX. 31

Slave Device

Wireless gateway

(model: WL40MW1VN)

Modbus/Master

Wireless gateway

(model: WL40EW2VN)

Specifications are subject to change without notice.

WL40EW2VN SPECIFICATIONS

ES-9117 Rev.0 Page 6/6

http://www.m-system.co.jp/

WL40EW2VN-R/E [MSYSTEM]

相关型号：

WL40EW2VN-R/Q

WL40EW2VN-R/S

WL40EW2VN-S

WL40EW2VN-S/E

WL40EW2VN-S/Q

WL40EW2VN-S/S

WL40MW1F

WL40MW1F-R

WL40MW1F-R/E

WL40MW1F-R/Q

WL40MW1F-R/S

WL40MW1F-S