WL40W1F-DAC4AS/Q [MSYSTEM]
Wireless I/O WL40F Series;
| 型号： | WL40W1F-DAC4AS/Q |
| 厂家： | 
M-SYSTEM |
| 描述： | Wireless I/O WL40F Series 无线 |
| 文件： | 总7页 (文件大小：607K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MODEL: WL40W1F-DAC4A
/C02: Polyurethane coating
/C03: Rubber coating
Wireless I/O WL40F Series
WIRELESS I/O UNIT
FUNCTIONS & FEATURES
This unit
Modbus-RTU Transparent 900MHz Band Wireless Device
(Child Device), Built-in I/O, 2 contact Inputs, 2 NPN
Transistor Outputs
• Operates as a 900MHz band wireless device (child device).
• Incorporates the module compliant with FCC Part 15, and
can be used only in the United States.
• Connects inputs/outputs by wireless communication using
Modbus-RTU protocol.
60 (2.36)
[260
(10.24)]
RELATED PRODUCTS
For related products of wireless device, refer to M-System's
web site.
• PC configurator software (model: W920FCFG)
Downloadable at M-System’s web site.
A dedicated cable is required to connect the unit to the PC.
Please refer to the internet software download site or the
users manual for the PC configurator software for applicable
cable types.
155 (6.10)
mm (inch)
MODEL: WL40W1F-DAC4A-[1][2]
Maintenance software
Maintenance console: MH920 Console International (model:
MH920CI) (OKI)
ORDERING INFORMATION
• Code number: WL40W1F-DAC4A-[1][2]
Specify a code from below for each [1] and [2].
(e.g. WL40W1F-DAC4A-R/E/Q)
(Maintenance software is downloadable at M-System’s web
site.)
Coaxial cable
• Specify the specification for option code /Q
(e.g. /C01)
• 7.5 m extension cable for rooftop antenna (model: CX-
SAC0SAD0Q0750) (OKI)
Using 7.5 m coaxial cable for extension decreases
transmission distance.
I/O TYPE
DAC4A: 2 contact inputs, 2 NPN transistor outputs
GENERAL SPECIFICATIONS
Connection
[1] POWER INPUT
DC Power
Wireless network: SMA coaxial connector
Power supply: Tension clamp (Front Twinconnection)
S: 12 V DC
Applicable wire size: 0.2 - 2.5 mm
Input/output: Separable tension clamp terminal
Applicable wire size: 0.2 - 1.5 mm , stripped length 10 mm
2, stripped length 10 mm
(Operational voltage range 12 V ±10 %, ripple 10 %p-p max.)
R: 24 V DC
2
(Operational voltage range 24 V ±10 %, ripple 10 %p-p max.)
Maintenance: Mini USB type B female connector
Isolation: Power input to FE1 to Contact input to Transistor
output to antenna connector
[2] OPTIONS (multiple selections)
Antenna
Indicator LED: Power
/S: Sleeve antenna
/E: Rooftop antenna
WIRELESS SPECIFICATIONS
Communication Standard: IEEE 802.15.4g
Frequency: 900MHz band (902 - 928 MHz)
Max. Transmission power: 20mW
Bandwidth: 400 kHz
Other Options
blank: none
/Q: Option other than the above (specify the specification)
SPECIFICATIONS OF OPTION: Q
COATING (For the detail, refer to M-System's web site.)
/C01: Silicone coating
Modulation: GFSK
Baud rate: Max. 100 kbps
WL40W1F SPECIFICATIONS
ES-9083 Rev.1 Page 1/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DAC4A
Channels: 1 to 43ch
OUTPUT SPECIFICATIONS
Output setting: Configurator software
■TRANSISTOR OUTPUT
Security: 128bit AES
Indicator LEDs: 920Run, 920Link, 920ERR
Protocol: Modbus-RTU
Number of output: 2 points
Communication module: Coordinator module incorporated
(Oki Electric Industry Co., Ltd. )
Radio parameters setting: Configurator software
Antenna
Common: Negative common (NPN)
Rated load voltage:
24 V DC: ±10 %, ripple 5 %p-p max. (for power input 24 V
DC)
•Sleeve antenna (Model: MH920-ANT-F (S))
Indoor use
12 V DC: ±10 %, ripple 5 %p-p max. (for power input 12 V
DC)
Non-waterproof
Rated output current: 0.1 A
Non-directional
Residual voltage: ≤ 1.2 V
Gain: 3.0dBi max.
Leakage current: ≤ 0.1 mA
•Rooftop antenna (Model: MH920-ANT-F (R))
Outdoor/indoor use
ON delay time: ≤ 2.0 msec.
OFF delay time: ≤ 2.0 msec.
Cable length: 2.5 m
Overload current protection function: Limits the current
value when overcurrent is detected.
Overheat protection function: Turns OFF the outputs when
overheat is detected. (When driving an inductive load,
connect a diode in parallel with the load.)
Transistor output status indicator LED: lights up when the
contact is ON (DO1, DO2).
Waterproof performance: IPx6 (except connector)
Non-directional
Gain: 2.0dBi max.
INPUT SPECIFICATIONS
■CONTACT INPUT (NPN/PNP)
Number of input: 2 points
Rated input voltage:
INSTALLATION
Current consumption:
24 V DC: ±10 %, ripple 5 %p-p max. (for power input 24 V
DC)
24 V DC: ≤ 70 mA (contact I/O load charge is not included)
12 V DC: ≤ 130mA (contact I/O load charge is not included)
Operating temperature: -10 to +55°C (14 to 131°F)
Storage temperature: -10 to +55°C (14 to +131°F)
Operating humidity: 10 to 90 %RH (non-condensing)
Atmosphere: No corrosive gas or heavy dust
Mounting: DIN rail
12 V DC: ±10 %, ripple 5 %p-p max. (for power input 12 V
DC)
ON voltage/ON Current:
≥ 16 V DC (between input terminal and COM)/ ≥ 3.7 mA
(for power input 24 V DC)
≥ 7.5 V DC (between input terminal and COM)/ ≥ 3.7 mA
(for power input 12 V DC)
Weight
OFF voltage/OFF current:
Unit: Approx. 260 g (0.57 lb)
≤ 5 V DC (between input terminal and COM)/ ≥ 1 mA (for
power input 24 V DC)
Sleeve antenna (standard): 27 g (0.95 oz)
Rooftop antenna: 52 g (1.83 oz)
≤ 3 V DC (between input terminal and COM)/ ≥ 1 mA (for
power input 12 V DC)
PERFORMANCE
Input current:
Insulation resistance: ≥ 100 MΩ with 500 V DC
Dielectric strength: 1500 V AC @ 1 minute
(power input to FE1 to contact input to transistor output to
antenna connector)
≤ 5.5 mA (at 24 V DC) (for power input 24 V DC)
≤ 5.5 mA (at 12 V DC) (for power input 12 V DC)
Input resistance:
approx. 4.4 kΩ (for power input 24 V DC)
approx. 2.2 kΩ (for power input 12 V DC)
Read rate: ≤ 5 msec.
STANDARDS & APPROVALS
Module conforming to FCC Part 15 incorporated
ON delay time: ≤ 2.0 msec.
OFF delay time: ≤ 2.0 msec.
Contact input status indicator LED: lights up when the
contact is ON (Dl1, Dl2).
WL40W1F SPECIFICATIONS
ES-9083 Rev.1 Page 2/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DAC4A
CONFIGURATOR SOFTWARE SETTING
With configurator software, settings shown below are available.
Refer to the users manual of W920FCFG for detailed operation.
■ WIRELESS SETTING
ITEM
Preferred PAN ID (group number)
Radio channel number
Short address
SETTING RANGE
DEFAULT
0000 – FFFE (hexadecimal, 4 digits)
1 – 43 (selectable up to 10 channels)
0000 – FFFD (hexadecimal, 4 digits)
0000
None
0000
Network name
English one-byte characters within 16 characters
(one-byte space, “-”, “_”, “.”, “@” are usable.)
Blank
Encryption key
0000...0 – FFFF...F
(hexadecimal, 32 digits)
0000...0
Transmitter power output
Low-speed moving mode
0.16mW / 1mW / 20mW
No / Yes
20mW
No
Device type in a network,
Number of devices in a network
Child (xed), 1 to 30 devices /
Child (xed), 31 to 60 devices /
Child (xed), 61 to 100 devices /
Child (xed) + child (moving)
Child (xed), 1 to 30
devices
Set network quality
Standard (recommended) /
Frequency of route switching and delay (higher) /
Frequency of route switching and delay (highest)
Standard (recommended)
Network join mode
Fixed route
V3-compatible mode / Fast join mode
No / Yes
V3-compatible mode
No
Destination short address
Temporary detour
0000 – FFFD (hexadecimal, 4 digits)
No / Yes
0000
Yes
Packet ltering
None / Yes (polling type)
1.0 – 60.0 (sec.)
Yes (polling type)
1.0 (sec.)
3.0 (sec.)
1
Filter timeout on polling
920Run timeout
1.0 – 60.0 (sec.)
Modbus node address
Retry times before route switching
1 – 247
Once / Twice / Three times
Three times
* For version confi rmation of communication module, refer to the users manual of W920FCFG.
■ TRANSISTOR OUTPUT SETTING
ITEM
Output status at time of
SETTING RANGE
DEFAULT
Hold / Clear
Hold
920Run communication disconnect
EXTERNAL VIEW
■ FRONT VIEW
Antenna Connector
Status Indicator LED
Contact input/Transistor output
Indicator LED
Power
DI1
DI2
DO1
DO2
920Link
920Run
920ERR
Maintenance Connector
Configuration Jack
CFG2
DI1A
DI1B
DI2A
DI2B
NC
CFG1
Contact Input Connector
24V
0V
V+
NC
NC
FE1
V-
DO1
DO2
NC
＊
Connector for Power Input
Transistor Output Connector
＊Power input defers depending on the power input code you select.
WL40W1F SPECIFICATIONS
ES-9083 Rev.1 Page 3/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DAC4A
TERMINAL ASSIGNMENTS
■ CONNECTORS FOR POWER INPUT
Unit side connector: MSTBV2,5/5-GF-5,08AU (Phoenix Contact)
Cable side connector: TFKC2,5/5-STF-5,08AU (Phoenix Contact)
• Power input code: R (24 V DC)
• Power input code: S (12 V DC)
ID
24V
0V
FUNCTION
ID
12V
0V
FUNCTION
Power input 24 V
Power input 0 V
Not used
Power input 12 V
Power input 0 V
Not used
24V
0V
12V
0V
NC
NC
FE1
NC
NC
FE1
NC
NC
FE1
NC
NC
FE1
Not used
Not used
Power input earth
Power input earth
■ CONTACT INPUT CONNECTOR
Unit side connector: MC1,5/5-GF-3,5 (Phoenix Contact)
Cable side connector: FMC1,5/5-STF-3,5 (Phoenix Contact)
ID
FUNCTION
DI1A Contact input 1A
DI1B Contact input 1B
DI2A Contact input 2A
DI2B Contact input 2B
NC Not used
DI1A
DI1B
DI2A
DI2B
NC
■ TRANSISTOR OUTPUT CONNECTOR
Unit side connector: MC1,5/5-GF-3,5 (Phoenix Contact)
Cable side connecto: FMC1,5/5-STF-3,5 (Phoenix Contact)
ID
V+ External excitation +
V– External excitation –
FUNCTION
V+
V-
DO1
DO2
NC
DO1 NPN transistor output 1
DO2 NPN transistor output 2
NC Not used
WL40W1F SPECIFICATIONS
ES-9083 Rev.1 Page 4/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DAC4A
MODBUS FUNCTION CODES & SUPPORTED CODES
Modbus function codes are shown below.
■ DATA AND CONTROL FUNCTION
CODE NAME
01
02
03
04
05
06
15
16
Read Coil Status
Digital output from the slave (read / write)
Read Input Status
Status of digital inputs to the slave read only
(
)
Read Holding Registers
Read Input Registers
Force Single Coil
General purpose register within the slave read / write
(
)
Collected data from the !eld by the slave read only
(
)
Digital output from the slave read / write
(
)
Preset Single Registers
Force Multiple Coils
Preset Multiple Registers
General purpose register within the slave read / write
(
)
Digital output from the slave read / write
(
)
General purpose register within the slave read / write
(
)
■ EXCEPTION CODE
CODE NAME
01
02
03
04
05
06
07
Illegal Function
Function code is not allowable for the slave
Address is not available within the slave
Data is not valid for the function
Illegal Data Address
Illegal Data Value
Slave Device Failure
Acknowledge
Slave Device Busy
Negative Acknowledge
MODBUS I/O ASSIGNMENT
ADDRESS
DATA TYPE
DATA
Coil (0X)
1, 2
Digital Output 1, 2
Reserved (unused)
Digital Input 1, 2
Reserved (unused)
Reserved (unused)
Reserved (unused)
3 – 16
1, 2
Input (1X)
3 – 16
1 – 16
1 – 16
Input Register (3X)
–
–
Holding Register (4X)
Note: DO NOT access addresses other than mentioned above. Such access may cause problems such as inadequate operation.
I/O DATA DESCRIPTIONS
■CONTACT INPUT DATA/TRANSISTOR OUTPUT DATA (1 BIT)
Contact input data and transistor output data are indicated each by 1 bit.
0: OFF
1: ON
WL40W1F SPECIFICATIONS
ES-9083 Rev.1 Page 5/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DAC4A
EXTERNAL DIMENSIONS & TERMINAL ASSIGNMENTS unit: mm (inch)
● WITH SLEEVE ANTENNA
DIN RAIL
35mm wide
60 (2.36)
45 (1.77)
107 (4.21)
3 (.12)
[200 (7.87)]
● WITH ROOFTOP ANTENNA
3 (0.12) dia.
1.2 (.05) dia.
8 (.31) Hex.
DIN RAIL
35mm wide
27 dia.
(1.06)
approx. 2500 (98.4)
20
(.79)
107 (4.21)
3(.12)
WL40W1F SPECIFICATIONS
ES-9083 Rev.1 Page 6/7
http://www.m-system.co.jp/
MODEL: WL40W1F-DAC4A
SCHEMATIC CIRCUITRY & CONNECTION DIAGRAM
LED
Two-way
＊
Antenna Connector
wireless circuit
24V
Power Input
0V
USB Connector
Jack
Maintenance Connector
Configuration Jack
NC
NC
FE1
Control
Circuit
Input Circuit
Output Circuit
DI1A
DI1B
DI2A
DI2B
NC
V+
V–
EXCITATION +
EXCITATION –
INPUT 1
INPUT 2
OUTPUT 1
OUTPUT 2
DO1
DO2
NC
＊Power input defers depending on the power input code you select.
■ INPUT CIRCUIT
■ OUTPUT CIRCUIT
DI1A
V+
DO1
DI1B
DI2A
Control
Circuit
Control
Circuit
DI2B
DO2
V–
• Input Connection Example
• Output Connection Example
PNP connection
NPN connection
+
−
−
+
DI1B
DI1A
DI2B
DI2A
DI1B
DI1A
DI2B
DI2A
V+
V–
−
+
DO1
DO2
+
−
−
+
Specifications are subject to change without notice.
WL40W1F SPECIFICATIONS
ES-9083 Rev.1 Page 7/7
http://www.m-system.co.jp/
相关型号：
WL40W1F-DAC4AS/S
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2-R
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2-R/E
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2-R/Q
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL40W1F-DS2-R/S
Wireless I/O WL40F SeriesWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
MSYSTEM
WL4532V
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-100
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-101
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-102
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-120
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
WL4532V-121
SMD POWER INDUCTOR-RoHSWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
FENGJUI
©2020 ICPDF网 联系我们和版权申明