M61008STCNFREQ [MTRONPTI]

HCMOS Output Clock Oscillator, 8MHz Min, 52MHz Max, ROHS COMPLIANT, CERAMIC, LEADLESS PACKAGE-10;


型号：	M61008STCNFREQ
厂家：	MTRONPTI
描述：	HCMOS Output Clock Oscillator, 8MHz Min, 52MHz Max, ROHS COMPLIANT, CERAMIC, LEADLESS PACKAGE-10 机械振荡器
文件：	总8页 (文件大小：747K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

M610x Series Stratum 3

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Product Features

•

Stratum 3 performance with hold-over

stability (0.32 ppm) over industrial temperature

range (-40 °C to +85 °C)

•

Available in both 10 and 4/5 pads conﬁgurations

3.0 V, 3.3 V and 5.0 V versions

Low phase noise and Excellent G-Sens performance:

1.5ppb/G

N (10 Pad)

Package Option

•

Tri-state Function available

Product Description

MtronPTI’s M610x Series TCXO’s and TCVCXO’s provide network and wireless engineers with low voltage, surface

mount products with tight stability over temperature and time. MtronPTI’s unique approach to crystal compensation

enables these devices to achieve full Stratum 3 temperature stability including holdover over -40 C to +85 C. Specially

processed crystals enable the M610x to achieve consistent long-term stability and minimal frequency shift after reﬂow.

This processing also achieves excellent g-sensitivity (1.5 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes

the M610x ideal for those design engineers working on high data-rate, low BER data communication network products.

With two standard package conﬁgurations, MtronPTI can support the original industry standard 10 pad as well as the

newer 4/5 pad topology (4 pad is without Tristate function and 5 pad is with Tristate function).

Product Applications

The M610x Series is ideally suited for a wide range of applications such as SONET, SDH, SERDES, GSM, CDMA, 3G, 4G,

Gig-Ethernet, 10G and 40G systems. Standard output for the M610x series is HCMOS compatible or clipped sinewave and

draws as little as 1.5 mA with a 3.3 volt supply at 13 MHz. This low power consumption provides a distinct advantage over

similarly speciﬁed ovenized oscillators for power-sensitive remote applications. The M610x series offers ±9.2 ppm minimum

pull range with excellent tuning linearity performance for critical PLL applications. This series is available in frequencies from

8 to 40MHz and selectively to 52MHz.

Product Ordering Information

M6100Sxxx, M6101Sxxx & M6102Sxxx - Contact factory for datasheets.

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

Revision: 1-5-11

M610x Series Stratum 3

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Performance Characteristics

Parameter

Symbol

F_O

Min.

Typ.

Max.

Units

MHz

Conditions/Notes

Contact factory above 40 MHz

See Ordering Information

Frequency Range

Operating Temperature

Storage Temperature

Frequency Tolerance @ +25°C

Frequency Stability

T_A

-40

+85

°C

T_STG

-55

-1.0

+125

+1.0

+0.28

+4.6

+0.32

°C

ppm

For TCXO only

-0.28

-4.6

Stability vs. Temperature

Overall stability for 10 years

Holdover stability for 24 hours over

operating temperature

-0.32

Stability Vs. Reflow

-1.0

-5.0

+1.0

±0.1

+5.0

3.3

ppm

Frequency Vs. Supply

Frequency Vs. Load

Supply Voltage Tolerance

Supply Current (I_D)

±0.02

For 5% supply voltage variation

For 5% load variation

See Ordering Information

HCMOS output at 13 MHz

HCMOS output at 26 MHz

HCMOS output at 52 MHz

Clipped sinewave output at 13 MHz

Clipped sinewave output at 26 MHz

Clipped sinewave output at 52 MHz

I_OH/I_OL= ± 4 mA, Vs = +3.0 V

F_o< 40 MHz

2.2

3.5

6.0

1.5

1.8

3.0

%V_S

V_pk-pk

5.0

9.2

2.2

2.7

4.5

Output Logic Levels

(HCMOS)

V_OL

V_OH

1.0

0.8

Output Level

(Clipped Sinewave)

Waveform Symmetry

Rise/Fall Time

Output Load

F_o> 40 MHz

Ref. to ½ V_S.HCMOS only

Ref. 10% to 90%. HCMOS only

HCMOS output

10/10

Kohm/pF Clipped sinewave output

Frequency Adjustment

Control Voltage Range

±9.2

0.3

ppm

Volts

µA

Over Control Voltage Range

For V_S= 3.0

2.7

3.0

4.5

+50

0.3

For V_S= 3.3

0.5

For V_S= 5.0

Input Leakage Current

Input Resistance

Linearity

-50

100

Kohm

Modulation Bandwidth

Tristate Function

kHz

%V_S

µA

Output enabled. Logic “1” or “Open”

Output disabled. Logic “0” or “GND”

Tristate Leakage Current

Phase Noise

-100

+100

-95

dBc/Hz

10 Hz Offset

100 Hz Offset

(Typical 10 MHz CMOS)

-125

dBc/Hz

-145

-152

-155

dBc/Hz

1 KHz Offset

10 KHz Offset

100 kHz Offset

Shock

MIL-STD-202, Method 213, Condition C

MIL-STD-202, Methods 201 & 204

EIAJ-STD-002

100 g

Vibration

Solderability

Package

10 g from 10 to 2000 Hz

5.0 x 7.0 x 2.0 mm, SMT

RoHS Compliant

Max Soldering Conditions

See solder profile

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M610x Series Stratum 3

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Phase Noise Plot

Output Waveform (HCMOS Output)

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M610x Series Stratum 3

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Product Dimension & Pinout Information - Package Code N (10 Pad)

Pin Connections

Function

Pad

Vref or N/C

N/C - Do Not Connect

Ground

Output

N/C - Do Not Connect

Tristate

Supply Voltage (V_s)

Control Voltage

Part Marking Guide

Line

Description

Part family, year,

month of production

Frequency

SUGGESTED SOLDER PAD LAYOUT

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

Product Dimension & Pinout Information - Package Code T (4/5 Pad)

Pin Connections

Function

Pad

Vcontrol

N/C - Do Not Connect

Ground

N/C - Do Not Connect

Output

Tristate or

N/C - Do Not Connect

Power

N/C - Do Not Connect

Part Marking Guide

Line

Description

Part family, year,

month of production

Frequency

SUGGESTED SOLDER PAD LAYOUT

WITH TRISTATE (5 PAD)

SUGGESTED SOLDER PAD LAYOUT

WITHOUT TRISTATE (4 PAD)

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M610x Series Stratum 3

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Handling Information

Although protection circuitry has been designed into the M610x oscillator, proper precautions should be taken to

avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body

model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.

ESD voltage thresholds are dependent on the circuit parameters used to deﬁne the mode. Although no industry-

wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is

widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was

obtained using these circuit parameters.

Typical Test Circuits

Test Circuit - T Package

Without Tri-State Option

Test Circuit - T Package

With Tri-State Option

Test Circuit - N Package

With Tri-State

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M610x Series Stratum 3

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Tape & Reel Speciﬁcations

(all measurements

are in mm)

M610x

5.40

7.40

1.55

7.50

2.60

2.00

4.00 16.00

330

13.00 20.20

100 16.40

Standard Tape and Reel: 1000 parts per reel

Maximum Soldering Conditions

Solder Conditions

Note: Exceeding these limits may damage the device.

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M610x Series Stratum 3

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Quality Parameters

Environmental Specifications/Qualification Testing Performed on the M610x TCXO/TCVCXO

Test

Electrical Characteristics

Frequency vs. Temperature Internal Specification

Mechanical Shock

Vibration

Thermal Cycle

Aging

Gross Leak

Fine Leak

Solderability

Test Method

Internal Specification

Test Condition

Per Specification

100 g, 6 ms

MIL-STD-202, Method 213, C

MIL-STD-202, Method 201-204

MIL-STD-883, Method 1010, B

Internal Specification

MIL-STD-202, Method 112

MIL-STD-883, Method 2003

MIL-STD-883, Method 2015

MIL-STD-883, Method 2016

Internal Specification

10 g from 10-2000 Hz

-55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles

168 Hours at 105 Degrees C

30 Second Immersion (Crystal Only)

Must meet 1x10^-8(Crystal Only)

8 Hour Steam Age – Must Exhibit 95% coverage

Three 1 minute soaks

Resistance to Solvents

Physical Dimensions

Internal Visual

Per Specification

Per Internal Specification

Load Circuit

Load Circuit #7 - Clipped Sinewave Output

Load Circuit #2 - HCMOS Output

DUT Output

Test Point

DUT Output

Test Point

C Load

10K Ohms

10 pF

Note: C Load includes probe and ﬁxturing.

Product Revision Table

Date Revision PCN Number Details of Revision

For custom products or additional speciﬁcations contact our sales team at

800.762.8800 (toll free) or 605.665.9321

For more information on this product visit the MtronPTI website at

www.mtronpti.com

M61008STCNFREQ [MTRONPTI]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E