M61601MTSN
更新时间：2024-10-29 21:27:05
品牌：MTRONPTI
描述：5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO
概述
数据手册M61601MTSN 概述
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO
M61601MTSN 数据手册
通过下载M61601MTSN数据手册来全面了解它。这个PDF文档包含了所有必要的细节，如产品概述、功能特性、引脚定义、引脚排列图等信息。
PDF下载M616x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Product Features
•
Tight stability performance
(+/0.2 ppm) over Industrial Temperatures (-40°C to +85°C)
(+/0.10 ppm) over Commercial Temperatures (0°C to 70°C)
Available in 10 pad and 14 DIP configurations (Contact factory for 14 DIP)
3.0 V, 3.3 V and 5.0 V versions
Low phase noise performance
Tri-state Function standard
•
•
•
•
•
N (10 Pad)
Package Option
Low G-sensitivity (0.6 ppb/G) version available
Product Description
MtronPTI’s M616x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products
with extremely tight stability (to 0.10 ppm) over temperature and time. Specially processed crystals enable the M616x to
achieve consistent long-term stability and minimal frequency shift after reflow. This processing also achieves excellent
g-sensitivity (0.6 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes the M616x ideal for the design engineer
working on all types of systems as the reference timing source. Ten pad SMT and 14-pin DIP compatible versions
available.
Product Applications
The M616x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,
WLAN, WiMax base stations, point to point/multi-point radios, medical equipment, frequency synthesis, frequency translation
and land mobile radio. Standard output for the M616x series is HCMOS compatible or clipped sinewave. The product is
ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply at 13
MHz. This low power consumption provides an advantage over similarly specified ovenized oscillators for power-sensitive
applications. The M616x series offers ±9.2 ppm minimum pull range with excellent tuning linearity performance for critical
PLL applications. This series is available in frequencies from 8 to 40MHz and selective frequencies up to 52 MHz.
Product Ordering Information
Ordering Information
00.0000
MHz
M616x
1
J
T
C
T
Product Series
M6160: 5.0 V
M6161: 3.3 V
M6162: 3.0 V
M6163: 5.0 V Low G
M6164: 3.3 V Low G
M6165: 3.0 V Low G
Temperature Range
1: 0ºC to +70ºC
8: 0ºC to +50ºC
2: -40ºC to +85ºC F: -30ºC to +75ºC
6: -20ºC to +70ºC
Stability
L: ±4.6 ppm
H: ±2.5 ppm
K: ±2.0 ppm
J: ±1.0 ppm
G: ±0.5 ppm
P: ±0.3 ppm
M: ±0.2 ppm
Q: ±0.14 ppm
N: ±0.10 ppm
Output Type
T: Voltage Controlled With Tristate
F: No Voltage Control With Tristate
Output Waveform
C: HCMOS
S: Clipped Sine Wave
Package/Lead Configurations
N: 10 Pad Leadless Ceramic D: 14 DIP
Frequency (customer specified)
M6160Sxxx, M6161Sxxx, M6162Sxxx, M6163Sxxx, M6164Sxxx &
M6165Sxxx - Contact factory for datasheets.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
Revision: 5-7-11
M616x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Performance Characteristics
Parameter
Symbol
FO
Min.
Typ.
Max.
52
Units
MHz
Conditions/Notes
Contact factory above 40 MHz
See Ordering Information
Frequency Range
8
Operating Temperature
Storage Temperature
Frequency Tolerance @ +25°C
Frequency Stability
TA
-40
+85
+125
+1.0
°C
°C
TSTG
-55
-1.0
ppm
For TCXO only
See Ordering Information
+1.0
(Fmax – Fmin)/2
Stability Vs. Reflow
Frequency Vs. Supply
Frequency Vs. Load
Aging (First Year)
Aging (First Year)
Aging (10 Year)
-1.0
ppm
ppm
ppm
ppm
ppm
ppm
ppm
%
±0.02
±0.02
±0.1
±0.1
+1.0
+2.0
+3.0
+5.0
+5.0
3.0
For 5% supply voltage variation
For 5% load variation
-1.0
-2.0
-3.0
-5.0
-5.0
2.0
F0 < 20 MHz
F0 > 20 MHz
F0 < 20 MHz (Includes first year)
F0 > 20 MHz (Includes first year)
See Ordering Information
HCMOS output at 13 MHz
HCMOS output at 26 MHz
HCMOS output at 52 MHz
Clipped sinewave output at 13 MHz
Clipped sinewave output at 26 MHz
Clipped sinewave output at 52 MHz
IOH/IOL = ± 4 mA, Vs = +3.0 V
IOH/IOL = ± 4 mA, Vs = +3.0 V
Aging (10 Year)
Supply Voltage Tolerance
Supply Current (ID)
mA
3.0
4.0
mA
5.5
6.5
mA
1.3
1.9
mA
1.7
2.3
mA
2.8
3.5
mA
Output Logic Levels
(HCMOS)
VOL
VOH
20
%VS
%VS
80
Output Level
1.0
0.8
Vpk-pk
Vpk-pk
Fo < 40 MHz
Fo > 40 MHz
(Clipped Sinewave)
Waveform Symmetry
Rise/Fall Time
40
60
%
ns
pF
Ref. to ½ VS. HCMOS only
Ref. 10% to 90%. HCMOS only
HCMOS output
6.5
Output Load
15
10/10
Kohm/pF Clipped sinewave output
Frequency Adjustment
G-Sensitivity
-5.0
0.3
+5.0
2.7
ppm
ppb/g
Volts
Over Control Voltage Range
0.6
Control Voltage Range
For VS = 3.0
0.3
0.5
3.0
4.5
Volts
Volts
For VS = 3.3
For VS = 5.0
Input Leakage Current
Input Resistance
Linearity
-50
+50
µA
Kohm
%
100
5
Modulation Bandwidth
Tristate Function
2 kHz
70
%VS
%VS
Output enabled. Logic “1” or “Open”
Output disabled. Logic “0” or “GND”
30
Tristate Leakage Current
Phase Noise
-100
+100
µA
-98
dBc/Hz
10 Hz Offset
100 Hz Offset
(Typical 20 MHz CMOS)
-125
dBc/Hz
-145
-154
-156
dBc/Hz
dBc/Hz
dBc/Hz
1 KHz Offset
10 KHz Offset
100 kHz Offset
Shock
MIL-STD-202, Method 213, Condition C
MIL-STD-202, Methods 201 & 204
EIAJ-STD-002
100 g
Vibration
Solderability
Package
10 g from 10 to 2000 Hz
5.0 x 7.0 mm, SMT and DIP
RoHS Compliant
Max Soldering Conditions
See solder profile
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
2
M616x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Phase Noise Plot
M616x 20 MHz Phase Noise
Output Waveform (HCMOS Output)
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
3
M616x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Product Dimension & Pinout Information - Package Code N (10 Pad)
Pin Connections
Function
Pad
1
N/C - Do Not Connect
N/C - Do Not Connect
N/C - Do Not Connect
Ground
2
3
4
Output
5
N/C - Do Not Connect
N/C - Do Not Connect
Tristate
6
7
8
Supply Voltage (Vs)
Control Voltage
9
10
SUGGESTED SOLDER PAD LAYOUT
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
4
M616x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Handling Information
Although protection circuitry has been designed into the M616x oscillator, proper precautions should be taken to
avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body
model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.
ESD voltage thresholds are dependent on the circuit parameters used to define the mode. Although no industry-
wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is
widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was
obtained using these circuit parameters.
Typical Test Circuits
N/C
Test Circuit - N Package
With Tri-State
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
5
M616x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Tape & Reel Specifications
(all measurements
A
B
C
D
E
F
G
H
J
K
L
M
N
are in mm)
M616x
5.40
7.40
1.55
7.50
2.60
2.00
4.00 16.00
330
13.00 20.20
100
16.40
Standard Tape and Reel: 1000 parts per reel
Maximum Soldering Conditions
Solder Condit
Note: Exceeding these limits may damage the device.
MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.
Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application specific requirements at 800.762.8800 toll free or 605.665.9321.
6
M616x Series
5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,
Precision TCXO/TCVCXO
Quality Parameters
Test
Electrical Characteristics
Frequency vs. Temperature Internal Specification
Mechanical Shock
Vibration
Thermal Cycle
Aging
Gross Leak
Fine Leak
Solderability
Test Method
Internal Specification
Test Condition
Per Specification
Per Specification
100 g, 6 ms
MIL-STD-202, Method 213, C
MIL-STD-202, Method 201-204
MIL-STD-883, Method 1010, B
Internal Specification
MIL-STD-202, Method 112
MIL-STD-202, Method 112
MIL-STD-883, Method 2003
MIL-STD-883, Method 2015
MIL-STD-883, Method 2016
Internal Specification
10 g from 10-2000 Hz
-55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles
168 Hours at 105 Degrees C
30 Second Immersion (Crystal Only)
Must meet 1x10-8 (Crystal Only)
8 Hour Steam Age – Must Exhibit 95% coverage
Three 1 minute soaks
Resistance to Solvents
Physical Dimensions
Internal Visual
Per Specification
Per Internal Specification
Load Circuit
Load Circuit #7 - Clipped Sinewave Output
Load Circuit #2 - HCMOS Output
DUT Output
Test Point
DUT Output
Test Point
10K Ohms
10 pF
C Load
Note: C Load includes probe and fixturing.
Product Revision Table
Date Revision PCN Number Details of Revision
For custom products or additional specifications contact our sales team at
800.762.8800 (toll free) or 605.665.9321
For more information on this product visit the MtronPTI website at
www.mtronpti.com
7
M61601MTSN 相关器件
| 型号 | 制造商 | 描述 | 价格 | 文档 |
| M61601NFCN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601NFSN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601NTCN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601NTSN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601PFCN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601PFSN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601PTCD20.0000MHZ | MTRONPTI | HCMOS Output Clock Oscillator, | 获取价格 |
|
| M61601PTCN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601PTSN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
| M61601QFCN | MTRONPTI | 5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO | 获取价格 |
|
M61601MTSN 相关文章
HARTING(浩亭)圆形连接器产品选型手册
- 2024-10-31
- 6
HYCON(宏康科技)产品选型手册
- 2024-10-31
- 6
GREEGOO整流二极管和晶闸管产品选型手册
- 2024-10-31
- 7
西门子豪掷106亿美元，战略收购工程软件巨头Altair
- 2024-10-31
- 8
