M61601QFCN [MTRONPTI]

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO;


型号：	M61601QFCN
厂家：	MTRONPTI
描述：	5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave, Precision TCXO/TCVCXO 石英晶振压控振荡器温度补偿晶振有源晶体振荡电路
文件：	总7页 (文件大小：809K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

M616x Series

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Product Features

•

Tight stability performance

(+/0.2 ppm) over Industrial Temperatures (-40°C to +85°C)

(+/0.10 ppm) over Commercial Temperatures (0°C to 70°C)

Available in 10 pad and 14 DIP conﬁgurations (Contact factory for 14 DIP)

3.0 V, 3.3 V and 5.0 V versions

Low phase noise performance

Tri-state Function standard

•

N (10 Pad)

Package Option

Low G-sensitivity (0.6 ppb/G) version available

Product Description

MtronPTI’s M616x Series TCXO’s and TCVCXO’s provide design engineers with low voltage, surface mount products

with extremely tight stability (to 0.10 ppm) over temperature and time. Specially processed crystals enable the M616x to

achieve consistent long-term stability and minimal frequency shift after reﬂow. This processing also achieves excellent

g-sensitivity (0.6 ppb/g). The low phase noise (-155 dBc/Hz at 100 kHz) makes the M616x ideal for the design engineer

working on all types of systems as the reference timing source. Ten pad SMT and 14-pin DIP compatible versions

available.

Product Applications

The M616x Series is ideally suited for a wide range of applications such as GPS, military, avionics, test and measurement,

WLAN, WiMax base stations, point to point/multi-point radios, medical equipment, frequency synthesis, frequency translation

and land mobile radio. Standard output for the M616x series is HCMOS compatible or clipped sinewave. The product is

ideally suited for battery and remote applications where it draws as little as 1.5 mA of current with a 3.3 volt supply at 13

MHz. This low power consumption provides an advantage over similarly speciﬁed ovenized oscillators for power-sensitive

applications. The M616x series offers ±9.2 ppm minimum pull range with excellent tuning linearity performance for critical

PLL applications. This series is available in frequencies from 8 to 40MHz and selective frequencies up to 52 MHz.

Product Ordering Information

Ordering Information

00.0000

MHz

M616x

Product Series

M6160: 5.0 V

M6161: 3.3 V

M6162: 3.0 V

M6163: 5.0 V Low G

M6164: 3.3 V Low G

M6165: 3.0 V Low G

Temperature Range

1: 0ºC to +70ºC

8: 0ºC to +50ºC

2: -40ºC to +85ºC F: -30ºC to +75ºC

6: -20ºC to +70ºC

Stability

L: ±4.6 ppm

H: ±2.5 ppm

K: ±2.0 ppm

J: ±1.0 ppm

G: ±0.5 ppm

P: ±0.3 ppm

M: ±0.2 ppm

Q: ±0.14 ppm

N: ±0.10 ppm

Output Type

T: Voltage Controlled With Tristate

F: No Voltage Control With Tristate

Output Waveform

C: HCMOS

S: Clipped Sine Wave

Package/Lead Conﬁgurations

N: 10 Pad Leadless Ceramic D: 14 DIP

Frequency (customer speciﬁed)

M6160Sxxx, M6161Sxxx, M6162Sxxx, M6163Sxxx, M6164Sxxx &

M6165Sxxx - Contact factory for datasheets.

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

Revision: 5-7-11

M616x Series

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Performance Characteristics

Parameter

Symbol

F_O

Min.

Typ.

Max.

Units

MHz

Conditions/Notes

Contact factory above 40 MHz

See Ordering Information

Frequency Range

Operating Temperature

Storage Temperature

Frequency Tolerance @ +25°C

Frequency Stability

T_A

-40

+85

+125

+1.0

°C

T_STG

-55

-1.0

ppm

For TCXO only

See Ordering Information

+1.0

(Fmax – Fmin)/2

Stability Vs. Reflow

Frequency Vs. Supply

Frequency Vs. Load

Aging (First Year)

Aging (10 Year)

-1.0

ppm

±0.02

±0.1

+1.0

+2.0

+3.0

+5.0

3.0

For 5% supply voltage variation

For 5% load variation

-1.0

-2.0

-3.0

-5.0

2.0

F₀< 20 MHz

F₀> 20 MHz

F₀< 20 MHz (Includes first year)

F₀> 20 MHz (Includes first year)

See Ordering Information

HCMOS output at 13 MHz

HCMOS output at 26 MHz

HCMOS output at 52 MHz

Clipped sinewave output at 13 MHz

Clipped sinewave output at 26 MHz

Clipped sinewave output at 52 MHz

I_OH/I_OL= ± 4 mA, Vs = +3.0 V

Aging (10 Year)

Supply Voltage Tolerance

Supply Current (I_D)

3.0

4.0

5.5

6.5

1.3

1.9

1.7

2.3

2.8

3.5

Output Logic Levels

(HCMOS)

V_OL

V_OH

%V_S

Output Level

1.0

0.8

V_pk-pk

F_o< 40 MHz

F_o> 40 MHz

(Clipped Sinewave)

Waveform Symmetry

Rise/Fall Time

Ref. to ½ V_S.HCMOS only

Ref. 10% to 90%. HCMOS only

HCMOS output

6.5

Output Load

10/10

Kohm/pF Clipped sinewave output

Frequency Adjustment

G-Sensitivity

-5.0

0.3

+5.0

2.7

ppm

ppb/g

Volts

Over Control Voltage Range

0.6

Control Voltage Range

For V_S= 3.0

0.3

0.5

3.0

4.5

Volts

For V_S= 3.3

For V_S= 5.0

Input Leakage Current

Input Resistance

Linearity

-50

+50

µA

Kohm

100

Modulation Bandwidth

Tristate Function

2 kHz

%V_S

Output enabled. Logic “1” or “Open”

Output disabled. Logic “0” or “GND”

Tristate Leakage Current

Phase Noise

-100

+100

µA

-98

dBc/Hz

10 Hz Offset

100 Hz Offset

(Typical 20 MHz CMOS)

-125

dBc/Hz

-145

-154

-156

dBc/Hz

1 KHz Offset

10 KHz Offset

100 kHz Offset

Shock

MIL-STD-202, Method 213, Condition C

MIL-STD-202, Methods 201 & 204

EIAJ-STD-002

100 g

Vibration

Solderability

Package

10 g from 10 to 2000 Hz

5.0 x 7.0 mm, SMT and DIP

RoHS Compliant

Max Soldering Conditions

See solder profile

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M616x Series

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Phase Noise Plot

M616x 20 MHz Phase Noise

Output Waveform (HCMOS Output)

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M616x Series

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Product Dimension & Pinout Information - Package Code N (10 Pad)

Pin Connections

Function

Pad

N/C - Do Not Connect

Ground

Output

N/C - Do Not Connect

Tristate

Supply Voltage (V_s)

Control Voltage

SUGGESTED SOLDER PAD LAYOUT

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M616x Series

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Handling Information

Although protection circuitry has been designed into the M616x oscillator, proper precautions should be taken to

avoid exposure to electrostatic discharge (ESD) during handling and mounting. MtronPTI utilizes a human-body

model (HBM) and a charged-device model (CDM) for ESD-susceptibility testing and protection design evaluation.

ESD voltage thresholds are dependent on the circuit parameters used to deﬁne the mode. Although no industry-

wide standard has been adopted for the CDM, a standard HBM (resistance = 1500 Ω, capacitance = 100 pF) is

widely used and therefore can be used for comparison purposes. The HBM ESD threshold presented here was

obtained using these circuit parameters.

Typical Test Circuits

N/C

Test Circuit - N Package

With Tri-State

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M616x Series

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Tape & Reel Speciﬁcations

(all measurements

are in mm)

M616x

5.40

7.40

1.55

7.50

2.60

2.00

4.00 16.00

330

13.00 20.20

100

16.40

Standard Tape and Reel: 1000 parts per reel

Maximum Soldering Conditions

Solder Conditions

Note: Exceeding these limits may damage the device.

MtronPTI reserves the right to make changes to the product(s) and service(s) described herein without notice. No liability is assumed as a result of their use or application.

Please see www.mtronpti.com for our complete offering and detailed datasheets. Contact MtronPTI for your application speciﬁc requirements at 800.762.8800 toll free or 605.665.9321.

M616x Series

5 x 7 mm, 3.0, 3.3 & 5.0 Volt, HCMOS or Clipped Sinewave,

Precision TCXO/TCVCXO

Quality Parameters

Environmental Specifications/Qualification Testing Performed on the M616x TCXO/TCVCXO

Test

Electrical Characteristics

Frequency vs. Temperature Internal Specification

Mechanical Shock

Vibration

Thermal Cycle

Aging

Gross Leak

Fine Leak

Solderability

Test Method

Internal Specification

Test Condition

Per Specification

100 g, 6 ms

MIL-STD-202, Method 213, C

MIL-STD-202, Method 201-204

MIL-STD-883, Method 1010, B

Internal Specification

MIL-STD-202, Method 112

MIL-STD-883, Method 2003

MIL-STD-883, Method 2015

MIL-STD-883, Method 2016

Internal Specification

10 g from 10-2000 Hz

-55 Deg. C to +125 Deg. C, 15 minute Dwell, 10 cycles

168 Hours at 105 Degrees C

30 Second Immersion (Crystal Only)

Must meet 1x10^-8(Crystal Only)

8 Hour Steam Age – Must Exhibit 95% coverage

Three 1 minute soaks

Resistance to Solvents

Physical Dimensions

Internal Visual

Per Specification

Per Internal Specification

Load Circuit

Load Circuit #7 - Clipped Sinewave Output

Load Circuit #2 - HCMOS Output

DUT Output

Test Point

DUT Output

Test Point

10K Ohms

10 pF

C Load

Note: C Load includes probe and ﬁxturing.

Product Revision Table

Date Revision PCN Number Details of Revision

For custom products or additional speciﬁcations contact our sales team at

800.762.8800 (toll free) or 605.665.9321

For more information on this product visit the MtronPTI website at

www.mtronpti.com

M61601QFCN [MTRONPTI]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E