DST9HB32E271Q55B [MURATA]

Data Line Filter, 1 Function(s), 250V, 6A,;


型号：	DST9HB32E271Q55B
厂家：	muRata
描述：	Data Line Filter, 1 Function(s), 250V, 6A, LTE
文件：	总4页 (文件大小：81K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Heavy-duty Type

Data Sheet

Leaded EMIFIL (Three-terminal Capacitor type)

Heavy-duty Type

DSN9H/DST9H Series

DSN9H Series

Dimensions

Insertion Loss Characteristics (Main Items)

100pF

22pF

(50Ω - 50Ω)

2200pF

270pF

4.0max

9.5max

2.5 0.5

1.0 0.5

5.0 0.5

100

120

ø0.65

0.1

Frequency (MHz)

100

1000

(in mm)

Rated Value ( : lead type/packaging code)

Operating

Temperature Range

Part Number

Capacitance

Rated Voltage

Rated Current

DSN9HB32E220

22pF 20ꢀ

100pF 20ꢀ

270pF 20ꢀ

2200pF 20ꢀ

250Vdc

-40 to +105°C

DSN9HB32E101

DSN9HB32E271

DSN9HB32E222

Diameter of Lead is 0.6mm for taping type. Taping type is three terminal in line arrangement.

DST9H Series

Dimensions

Insertion Loss Characteristics (Main Items)

(50Ω - 50Ω)

100pF

4.0 max.

9.5 max.

22pF

270pF

2200pF

Ferrite bead

2.5 0.5

5.0 0.5

1.25 0.5

ø0.65

100

120

GND

Q55 Type: I=25.0 min.

Q50 Type: I1=4.0 0.5

0.1

Frequency (MHz)

100

1000

(in mm)

Continued on the following page.

oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁcations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁcations because there is no space for detailed speciﬁcations. Therefore, please approve our product

speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

2014.5.12

Murata Manufacturing Co., Ltd.

http://www.murata.com/

Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Heavy-duty Type

Data Sheet

Continued from the preceding page.

Rated Value ( : lead type/packaging code)

Operating

Temperature Range

Part Number

Capacitance

Rated Voltage

Rated Current

DST9HB32E220

22pF 20ꢀ

100pF 20ꢀ

270pF 20ꢀ

2200pF 20ꢀ

250Vdc

-40 to +105°C

DST9HB32E101

DST9HB32E271

DST9HB32E222

Diameter of Lead is 0.6mm for taping type. Taping type is three terminal in line arrangement.

Equivalent Circuit

DSN9H Series

DST9H Series

GND

No polarity.

Packaging

Minimum Quantity

Minimum Order Quantity (order in sets only) (Pcs.)

ø320mm

Part Number

Ammo Pack

Bulk (Bag)

Paper reel

250 Q55

DSN9 Series

DST9 Series

2000

1000

—

500 Q54/Q56

200 Q55

250 Q50/Q52

Lead Type/Packaging

Code

Q55B

Q50B

Q52B

Q54B

Q56B

T41B

T51B

Q91A

Q92A

Q93A

U21A

U31A

Lead Type

Lead Length* (mm)

25.0 min.

4.0 0.5

Packaging

Series

All series

DST9N/H

DST9N

Straight

6.0 1.0

4.0 0.5

Bulk

DSN6N/9N, DSS6N

6.0 1.0

4.0 0.5

Incrimp

Straight

Incrimp

DSS6N

25.0 min.

20.0 1.0

16.5 1.0

18.5 1.0

16.5 1.0

18.5 1.0

DSp6N, DSN9N/H, DSS1N

DSp6N, DSp9N/H

Ammo Pack

DSS6N

Lead Distance between Reference and Bottom Planes Except for Bulk.

Continued on the following page.

oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁcations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁcations because there is no space for detailed speciﬁcations. Therefore, please approve our product

speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

2014.5.12

Murata Manufacturing Co., Ltd.

http://www.murata.com/

Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Heavy-duty Type

Data Sheet

Continued from the preceding page.

Caution · Notice

!Caution

o Rating

Do not use products beyond the rated current and rated voltage as this

may create excessive heat and deteriorate the insulation resistance.

o Soldering and Mounting

1. Mounting holes should be designed as specified in these

specifications. Other designs than those shown in these

specifications may cause cracks in ceramics that may

lead to smoking or firing.

Marking Side

Center Terminal

(Ground Terminal)

2. DSN9/DST9/DSN9H/DST9H/VFS9V Series

Mounting for PCB. (Applis only to bulk type.)

Fig.1 Right Way

Fig.2 Wrong Way

The form of the mounting hole of the bulk item is a triangle.

The product should be inserted and soldered to each hole in

the correct way as in Fig.1. (The center terminal and the other

terminals become parallel when viewing the product from the

side.) Smoking and firing maybe caused by incorrect mounting

as in Fig.2. (The center terminal and the other terminals cross

when viewing the product from the side.)

3. Take care not to apply any mechanical stress to product

body at the lead terminal bending process for product

angle adjustment after insertion.

For DST9, please do not bend the lead terminal at the

point between the dielectric part and the ferrite bead.

Continued on the following page.

oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁcations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁcations because there is no space for detailed speciﬁcations. Therefore, please approve our product

speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

2014.5.12

Murata Manufacturing Co., Ltd.

http://www.murata.com/

Noise Suppression Products/EMI Suppression Filters > Leaded EMIFILr (Three-terminal Capacitor type) > Heavy-duty Type

Data Sheet

Continued from the preceding page.

Notice

o Storage and Operating Conditions

2. Products should be used at rated voltage or less and

rated current or less.

1. Do not use products in a chemical atmosphere such

as chlorine gas, acid or sulfide gas.

2. Do not use products near water, oil or organic

solvents. Avoid environments where dust or dirt may

adhere to the product.

3. Products should not be applied for the absorption of

surges that have large energy (e.g., induced lightning

surges, switching surges) because it is designed for the

absorption of electrostatic surges (VFR3V).

4. Electrostatic testing should be done on the following

conditions (VFR3V).

1. Storage Period

Use the products within 12 months after delivery.

Solderability should be checked if this period is

exceeded.

N s ; # ꢀ 2 s 6²]²< 8.0 x10⁵

n: Times applied

C: Charging Capacitance (pF)

2. Storage Conditions

V: Testing Voltage (kV)

(1) Storage temperature: -10 to 40 degrees C

Relative humidity: 15 to 85%

R: Charging Resistance (Ω)

Avoid sudden changes in temperature and humidity.

(2) Do not store products in a chemical atmosphere

such as chlorine gas, acid or sulfide gas.

(3) When restoring taping type (BL01RN1A1F1J),

please attach the spacer between the flanges of the

reel. The spacer is corrugated paper that is attached

when shipping.

o Soldering and Mounting

1. Washing

Failure and degradation of a product are caused

by the washing method. When you wash in conditions

that are not in the mounting information, please contact

Murata engineering.

2. Soldering

Reliability decreases with improper soldering

methods. Please solder by the standard soldering

conditions shown in the mounting information.

3. Other

1. Terminal (with mark) should be properly connected to

the line of incoming electrostatic surge. (There is

polarity.) Otherwise, no effect in ESD suppression can

be expected (VFR3V).

Noise suppression levels resulting from Murata's

EMI suppression filters EMIFILr may vary, depending

on the circuits and ICs used, type of noise, mounting

pattern, lead wire length, mounting location, and other

operating conditions. Be sure to check and confirm in

advance the noise suppression effect of each filter, in

actual circuits, etc. before applying the filter in a

commercial-purpose equipment design.

Example of input terminal

Example of output terminal

Incoming

Electrostatic Surges

Incoming

Electrostatic Surges

oThis data sheet is applied for Lead EMIFILr Capacitor Type used for General Electronics equipment for your design.

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁcations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁcations because there is no space for detailed speciﬁcations. Therefore, please approve our product

speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

2014.5.12

Murata Manufacturing Co., Ltd.

http://www.murata.com/

相关型号：