EVA86Q7UTF331KB01#_技术文档

Reference Specification

Safety Standard Certified Resin Molding SMD Type Multilayer Ceramic Capacitors for

Automotive (Powertrain/Safety)

Product specifications in this catalog are as of May. 2023, and are subject to change or

obsolescence without notice.

Please consult the approval sheet before ordering.Please read rating and Cautions first.

Reference only

Caution

■Storage and Operation Conditions

1. The molding resin of the molding type ceramic capacitor does not form a perfect seal, avoid corrosive gas

(e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas etc.) and direct sunlight,

and use (storage) in the condition without moisture condensation.

When washing, bonding or molding this product, make sure that there is no effect on the quality in your product.

This one is MSL 3 product. So, in order to avoid the absorption of moisture, capacitors are packed in

moisture-proof package.

Under the following humidity and temperature conditions, the warranty period for unopened moisture-proof

package is 2 years after the moisture-proof package is enclosed.

Solder the enclosed capacitors within 168 h after opening the moisture-proof package.

Also, even after opening, store it in the packing condition at the time of delivery or in a similar state.

Temperature : 10 to 30 ℃

Humidityꢀ ꢀ: 60 % max.

If it has been more than 1 week since opening, or if the 10 % display of the HIC (humidity indicator card)

is pink, perform baking (60 °C, 168 h) before mounting.

In addition, if it exceeds 12 months, check the solderability before use.

■Rating

1. Temperature Dependent Characteristics

1. The electrical characteristics of a capacitor can change with temperature.

1-1. For capacitors having larger temperature dependency, the capacitance may change with temperature changes.

The following actions are recommended in order to ensure suitable capacitance values.

(1) Select a suitable capacitance for the operating temperature range.

(2) The capacitance may change within the rated temperature. When you use a high dielectric constant type

capacitor in a circuit that needs a tight (narrow) capacitance tolerance (e.g., a time-constant circuit),

please carefully consider the temperature characteristics, and carefully confirm the various characteristics

in actual use conditions and the actual system.

2. Measurement of Capacitance

1. Measure capacitance with the voltage and frequency specified in the product specifications.

1-1. The output voltage of the measuring equipment may decrease occasionally when capacitance is high.

Please confirm whether a prescribed measured voltage is impressed to the capacitor.

1-2. The capacitance values of high dielectric constant type capacitors change depending on the AC voltage applied.

Please consider the AC voltage characteristics when selecting a capacitor to be used in an AC circuit.

3. Applied Voltage

1. Do not apply a voltage to a safety standard certified product that exceeds the rated voltage as called out in the

specifications. Applied voltage between the terminals of a safety standard certified product shall be less than or equal

to the rated voltage (+10 %).ꢀWhen a safety standard certified product is used as a DC voltage product, the AC rated

voltage value becomes the DC rated voltage value.

(Example : AC250 V (r.m.s.) rated product can be used as DC250 V (+10 %) rated product.)

If both AC rated voltage and DC rated voltage are specified, apply the voltage lower than the respective rated voltage.

1-1. When a safety standard certified product is used in a circuit connected to a commercial power supply,

ensure that the applied commercial power supply voltage including fluctuation should be less than +10 % above

its rated voltage.

EGEVA03

1 / 23

Reference only

Caution

1-2. When using a safety standard certified product as a DC rated product in circuits other than those connected to

a commercial power supply.

When AC voltage is superimposed on DC voltage, the zero-to-peak voltage shall not exceed the rated DC voltage.

When AC voltage or pulse voltage is applied, the peak-to-peak voltage shall not exceed the rated DC voltage.

Typical Voltage Applied to the DC Capacitor

DC Voltage

DC Voltage+AC

AC Voltage

Pulse Voltage

E

0

E

0

(E : Maximum possible applied voltage.)

2. Abnormal voltages (surge voltage, static electricity, pulse voltage, etc.) shall not exceed the rated DC voltage.

4. Type of Applied Voltage and Self-heating Temperature

1. Confirm the operating conditions to make sure that no large current is flowing into the capacitor due to the continuous

application of an AC voltage or pulse voltage. When a DC rated voltage product is used in an AC voltage circuit or a

pulse voltage circuit, the AC current or pulse current will flow into the capacitor; therefore check the self-heating condition.

Please confirm the surface temperature of the capacitor so that the temperature remains within the upper limits of the

operating temperature, including the rise in temperature due to self-heating. When the capacitor is used with a

high-frequency voltage or pulse voltage, heat may be generated by dielectric loss.

The load should be contained so that the self-heating of the capacitor body remains below 20 °C, when measuring

at an ambient temperature of 25 °C. In addition, use a K thermocouple of φ0.1 mm with less heat capacity when

measuring, and measure in a condition where there is no effect from the radiant heat of other components or air flow

caused by convection. Excessive generation of heat may cause deterioration of the characteristics and reliability of the

capacitor. (Absolutely do not perform measurements while the cooling fan is operating, as an accurate measurement

may not be performed.)

5. DC Voltage and AC Voltage Characteristics

1. The capacitance value of a high dielectric constant type capacitor changes depending on the DC voltage applied.

Please consider the DC voltage characteristics when a capacitor is selected for use in a DC circuit.

1-1. The capacitance of ceramic capacitors may change sharply depending on the applied voltage (see figure).

Please confirm the following in order to secure the capacitance.

(1) Determine whether the capacitance change caused by the applied voltage is within the allowed range.

(2) In the DC voltage characteristics, the rate of capacitance change becomes larger as voltage increases, even if the

applied voltage is below the rated voltage. When a high dielectric constant type capacitor is used in a circuit that

requires a tight (narrow) capacitance tolerance (e.g., a time constant circuit), please carefully consider the voltage

characteristics, and confirm the various characteristics in actual operating conditions in an actual system.

2. The capacitance values of high dielectric constant type capacitors changes depending on the AC voltage applied.

Please consider the AC voltage characteristics when selecting a capacitor to be used in an AC circuit.

6. Capacitance Aging

1. The high dielectric constant type capacitors have the characteristic in which the capacitance value decreases with the

passage of time. When you use high dielectric constant type capacitors in a circuit that needs a tight (narrow) capacitance

tolerance (e.g., a time-constant circuit), please carefully consider the characteristics of these capacitors, such as their

aging, voltage, and temperature characteristics. In addition, check capacitors using your actual appliances at the intended

environment and operating conditions.

EGEVA03

2 / 23

Reference only

Caution

7. Vibration and Shock

1. Please confirm the kind of vibration and/or shock, its condition, and any generation of resonance.

Please mount the capacitor so as not to generate resonance, and do not allow any impact on the terminals.

2. Mechanical shock due to being dropped may cause a bend of terminal, damage or a crack in the dielectric material of

the capacitor. Do not use a dropped capacitor because the quality and reliability may be deteriorated.

3. When printed circuit boards are piled up or handled, the corner of another printed circuit board should not be allowed

to hit the capacitor, in order to avoid a bend of terminal, a crack or other damage to the capacitor.

■Soldering and Mounting

1. Mounting Position

1. Confirm the best mounting position and direction that minimizes the stress imposed on the capacitor during flexing

or bending the printed circuit board.

1-1. Choose a mounting position that minimizes the stress imposed on the chip during flexing or bending of the board.

[Component Direction]

Locate chip horizontal to the direction in which stress acts.

[Chip Mounting Close to Board Separation Point]

It is effective to implement the following measures, to reduce stress in separating the board. It is best to implement all

of the following three measures; however, implement as many measures as possible to reduce stress.

Contents of Measures

(1) Turn the mounting direction of the component parallel

(1) to the board separation surface.

Stress Level

A>D

C

Perforatio

B

(2) Add slits in the board separation part.

(3) Keep the mounting position of the component away

(3) from the board separation surface.

A>B

B

A

A>C

Slit

[Mounting Capacitors Near Screw Holes]

When a capacitor is mounted near a screw hole, it may be affected by the board deflection that occurs during the

tightening of the screw. Mount the capacitor in a position as far away from the screw holes as possible.

Screw Hole

Recommended

2. Information before Mounting

1. Do not re-use capacitors that were removed from the equipment.

2. Confirm capacitance characteristics under actual applied voltage.

3. Confirm the mechanical stress under actual process and equipment use.

4. Confirm the rated capacitance, rated voltage and other electrical characteristics before assembly.

5. Prior to use, confirm the solderability of capacitors that were in long-term storage.

6. Prior to measuring capacitance, carry out a heat treatment for capacitors that were in long-term storage.

7. The use of Sn-Zn based solder will deteriorate the reliability of the MLCC.

Please contact our sales representative or product engineers on the use of Sn-Zn based solder in advance.

EGEVA03

3 / 23

Reference only

Caution

3. Maintenance of the Mounting (pick and place) Machine

1. Make sure that the following excessive forces are not applied to the capacitors.

1-1. In mounting the capacitors on the printed circuit board, any bending force against them shall be kept to a minimum

to prevent them from any bending damage or cracking. Please take into account the following precautions and

recommendations for use in your process.

(1) Adjust the lowest position of the pickup nozzle so as not to bend the printed circuit board.

(2) Adjust the nozzle pressure within a static load of 1 to 3 N during mounting.

2. Dirt particles and dust accumulated between the suction nozzle and the cylinder inner wall prevent the nozzle from moving

moving smoothly. This imposes greater force upon the chip during mounting, causing cracked chips. Also, the locating

claw, when worn out, imposes uneven forces on the chip when positioning, causing cracked chips.

The suction nozzle and the locating claw must be maintained, checked, and replaced periodically.

4-1. Reflow Soldering

[Standard Conditions for Reflow Soldering]

1. When sudden heat is applied to the components, the

mechanical strength of the components will decrease

because a sudden temperature change causes deformation

inside the components. In order to prevent mechanical damage

to the components, preheating is required for both the

components and the PCB. Preheating conditions are shown

in table 1. It is required to keep the temperature differential

between the solder and the components surface (ΔT) as small

as possible.

Reflow

Temperature (℃)

Soldering

Peak Temperature

Gradual

Cooling

220 ℃

190 ℃

170 ℃

150 ℃

ΔＴ

Preheating

2 When components are immersed in solvent after mounting,

be sure to maintain the temperature difference (ΔT) between

the component and the solvent within the range shown in table 1.

Time

60 to 120 sec.

30 to 60 sec.

Table 1

Temperature Differential

ΔT≦130°C

[Allowable Reflow Soldering Temperature and Time]

280

Recommended Conditions

Lead Free Solder

270

260

250

Peak Temperature

Atmosphere

240 to 260 °C

Air or N₂

Lead Free Solder : Sn-3.0Ag-0.5Cu

240

230

220

3. When a capacitor is mounted at a temperature lower than

the peak reflow temperature recommended by the solder

manufacturer, the following quality problems can occur.

Consider factors such as the placement of peripheral components

and the reflow temperature setting to prevent the capacitor’s

reflow temperature from.

0

30

60

90

120

Soldering Time (sec.)

In the case of repeated soldering, the accumulated

soldering time must be within the range shown above.

Be sure to evaluate the mounting situation beforehand and verify

that none of the following problems occur.

・Drop in solder wettability

・Solder voids

・Possible occurrence of whiskering

・Drop in bonding strength

・Drop in self-alignment properties

・Possible occurrence of tombstones and/or shifting on the land

patterns of the circuit board

EGEVA03

4 / 23

Reference only

Caution

4. Optimum Solder Amount for Reflow Soldering

4-1. If solder paste is excessive, solder between a chip and a

metal terminal melts. This causes the chip to move and

come off.

higher than 0.3 mm

and lower than 1.0 mm

4-2. If solder paste is too little, it causes a lack of adhesive

strength on the metal terminal and the capacitor comes off.

4-3. Please make sure that solder is smoothly applied higher

than 0.3 mm and lower than 1.0 mm.

Inverting the PCB

Make sure not to impose any abnormal mechanical shocks to the PCB.

4-2. Flow Soldering

1. Do not apply flow soldering.

4-3. Correction of Soldered Portion

1. Use a soldering iron with a tip radius of 3.0 mm or less.

2. Regarding the type of solder, use a wire diameter of

φ0.5 mm or less (rosin core wire solder).

Tip of Soldering Iron

Tip temperature : 350 ℃ or less / 5 s or less / 60 W or less

3. Do not touch the resin by tip of Soldering Iron

to avoid the degradation of resin.

4. The amount of solder for corrections by soldering iron,

should be higher than 0.3 mm and lower than 1.0 mm.

Apply the tip of the

Wire Solder

Copper Land

soldering iron only on the

terminal portion, without

touching the resin.

higher than 0.3 mm

and lower than 1.0 mm

5. Washing

Excessive ultrasonic oscillation during cleaning can cause the PCBs to resonate, resulting in cracked chips or broken

solder joints. Take note not to vibrate PCBs.

6. Electrical Test on Printed Circuit Board

1. Confirm position of the backup pin or specific jig, when inspecting the electrical performance of a capacitor after

mounting on the printed circuit board.

1-1. Avoid bending the printed circuit board by the pressure of a test-probe, etc. The thrusting force of the test probe can

flex the PCB, resulting in cracked chips or open solder joints. Provide backup pins on the back side of the PCB

to prevent warping or flexing. Install backup pins as close to the capacitor as possible.

1-2. Avoid vibration of the board by shock when a test-probe contacts a printed circuit board.

[Not Recommended]

[Recommended]

Backup Pin

Peeling

Test-probe

EGEVA03

5 / 23

Reference only

Caution

7. Printed Circuit Board Cropping

1. After mounting a capacitor on a printed circuit board, do not apply any stress to the capacitor that causes bending

or twisting the board.

1-1. In cropping the board, the stress as shown at right may cause the capacitor to crack. Cracked capacitors may cause

deterioration of the insulation resistance, and result in a short. Avoid this type of stress to a capacitor.

[Bending]

[Twisting]

2. Check the cropping method for the printed circuit board in advance.

2-1. Printed circuit board cropping shall be carried out by using a jig or an apparatus (Disk separator, router type separator,

etc.) to prevent the mechanical stress that can occur to the board.

Board Separation Apparatus

Hand Separation

Nipper Separation

Board Separation Method

(1) Board Separation Jig

(2) Disk Separator

(3) Router Type Separator

Level of stress on board

Recommended

High

×

Medium

Low

△*

○

· Board handling

Hand and nipper separation

apply a high level of stress.

Use another method.

· Board handling

· Board bending direction

· Layout of capacitors

· Layout of slits

Notes

· Design of V groove

· Arrangement of blades

· Controlling blade life

Board handling

* When a board separation jig or disk separator is used, if the following precautions are not observed,

a large board deflection stress will occur and the capacitors may crack. Use router type separator if at all possible.

(1) Example of a suitable jig

[In the case of Single-side Mounting]

An outline of the board separation jig is shown as follows. Recommended example: Stress on the component

mounting position can be minimized by holding the portion close to the jig, and bend in the direction towards

the side where the capacitors are mounted. Not recommended example: The risk of cracks occurring in the

capacitors increases due to large stress being applied to the component mounting position, if the portion away

from the jig is held and bent in the direction opposite the side where the capacitors are mounted.

Recommended

Not Recommended

[Outline of Jig]

[In the case of Double-sided Mounting]

Since components are mounted on both sides of the board, the risk of cracks occurring can not be avoided with the

above method. Therefore, implement the following measures to prevent stress from being applied to the components.

(Measures)

Consider introducing a router type separator. If it is difficult to introduce a router type separator, implement

the following measures. (Refer to item 1. Mounting Position)

①

Mount the components at a right angle to the board separation surface.

When mounting components near the board separation point, add slits in the separation position

near the component.

②

③

Keep the mounting position of the components away from the board separation point.

④

EGEVA03

6 / 23

Reference only

Caution

(2) Example of a Disk Separator

An outline of a disk separator is shown as follows. As shown in the Principle of Operation, the top blade and bottom

blade are aligned with the V-grooves on the printed circuit board to separate the board. In the following case, board

deflection stress will be applied and cause cracks in the capacitors.

When the adjustment of the top and bottom blades are misaligned, such as deviating in the top-bottom, left-right

or front-rear directions

①

The angle of the V groove is too low, depth of the V groove is too shallow, or the V groove is misaligned

top-bottom IF V groove is too deep, it is possible to brake when you handle and carry it. Carefully design depth of

the V groove with consideration about strength of material of the printed circuit board.

②

[Outline of Machine]

[Principle of Operation]

[Cross-section Diagram]

Not Recommended

Left-right Misalignment

Recommended

Top-bottom Misalignment

Front-rear Misalignment

Top Bladeꢀ

Bottom Blade

Not Recommended

Example of Recommended

V-groove Design

Left-right Misalignment

Low-Angle

Depth too Shallow

Depth too Deep

(3) Example of Router Type Separator

The router type separator performs cutting by a router rotating at a high speed. Since the board does not bend in the

cutting process, stress on the board can be suppressed during board separation. When attaching or removing

boards to/from the router type separator, carefully handle the boards to prevent bending.

[Outline Drawing]

Router

8. Assembly

1. Handling

If a board mounted with capacitors is held with one hand, the board may bend. Firmly hold the edges of the board with

both hands when handling. If a board mounted with capacitors is dropped, cracks may occur in the capacitors.

Do not use dropped boards, as there is a possibility that the quality of the capacitors may be impaired.

EGEVA03

7 / 23

Reference only

Caution

2. Attachment of Other Components

2-1. Mounting of Other Components

Pay attention to the following items, when mounting other

components on the back side of the board after capacitors

have been mounted on the opposite side. When the bottom

dead point of the suction nozzle is set too low, board deflection

stress may be applied to the capacitors on the back side

(bottom side), and cracks may occur in the capacitors.

・ After the board is straightened, set the bottom dead point

of the nozzle on the upper surface of the board.

Suction Nozzle

吸着ノズル

・ Periodically check and adjust the bottom dead point.

2-2. Inserting Components with Leads into Boards

When inserting components (transformers, IC, etc.) into boards,

bending the board may cause cracks in the capacitors or

cracks in the solder. Pay attention to the following.

Increase the size of the holes to insert the leads, to reduce

the stress on the board during insertion.

Fix the board with backup pins or a dedicated jig before

insertion.

Support below the board so that the board does not bend.

When using multiple backup pins on the board, periodically

confirm that there is no difference in the height of each

backup pin.

・

Component with

2-3. Attaching/Removing Sockets

When the board itself is a connector, the board may bend when

a socket is attached or removed. Plan the work so that the board

does not bend when a socket is attached or removed.

ソケット

Socket

ソケット

2-4. Tightening Screws

The board may be bent, when tightening screws, etc. during the

attachment of the board to a shield or chassis.

Pay attention to the following items before performing the work.

Plan the work to prevent the board from bending.

Use a torque screwdriver, to prevent over-tightening of the

screws.

・

Screwdriver

ドライバー

The board may bend after mounting by reflow soldering, etc.

Please note, as stress may be applied to the chips by forcibly

flattening the board when tightening the screws.

・

■Other

1. Under Operation of Equipment

1-1. Do not touch a capacitor directly with bare hands during operation in order to avoid the danger of an electric shock.

1-2. Do not allow the terminals of a capacitor to come in contact with any conductive objects (short-circuit). Do not

expose a capacitor to a conductive liquid, including any acid or alkali solutions.

1-3. Confirm the environment in which the equipment will operate is under the specified conditions. Do not use

the equipment under the following environments.

(1) Being spattered with water or oil.

(2) Being exposed to direct sunlight.

(3) Being exposed to ozone, ultraviolet rays, or radiation.

(4) Being exposed to toxic gas (e.g., hydrogen sulfide, sulfur dioxide, chlorine, ammonia gas, etc.)

(5) Any vibrations or mechanical shocks exceeding the specified limits.

(6) Moisture condensing environments.

1-4. Use damp proof countermeasures if using under any conditions that can cause condensation.

EGEVA03

8 / 23

Reference only

Caution

2. Other

2-1. In an Emergency

(1) If the equipment should generate smoke, fire, or smell, immediately turn off or unplug the equipment. If the

equipment is not turned off or unplugged, the hazards may be worsened by supplying continuous power.

(2) In this type of situation, do not allow face and hands to come in contact with the capacitor or burns may be

caused by the capacitor's high temperature.

2-2. Disposal of Waste

When capacitors are disposed of, they must be burned or buried by an industrial waste vendor with the appropriate

licenses.

2-3. Circuit Design

(1) Addition of Fail Safe Function

Capacitors that are cracked by dropping or bending of the board may cause deterioration of the insulation

resistance, and result in a short. If the circuit being used may cause an electrical shock, smoke or fire when

a capacitor is shorted, be sure to install fail-safe functions, such as a fuse, to prevent secondary accidents.

(2) Capacitors used to prevent electromagnetic interference in the primary AC side circuit, or as a

connection/insulation, must be a safety standard certified product, or satisfy the contents stipulated

in the Electrical Appliance and Material Safety Law. Install a fuse for each line in case of a short.

2-4. Test Condition for AC Withstanding Voltage

(1) Test Equipment

Test for AC withstanding voltage should be made with equipment capable of creating a wave similar

to a 50/60 Hz sine wave.

(2) Voltage Applied Method

The capacitor's leads or terminals should be firmly connected to the output of the withstanding

voltage test equipment, and then the voltage should be raised from near zero to the test voltage.

If the test voltage is applied directly to the capacitor without raising it from near zero, it should be

applied with the zero cross. *At the end of the test time, the test voltage should be reduced to near

zero, and then the capacitor's leads or terminals should be taken off the output of the withstanding

voltage test equipment. If the test voltage is applied directly to the capacitor without raising it from

near zero, surge voltage may occur and cause a defect.

*ZERO CROSS is the point where voltage sine wave passes 0 V.

- See the figure at right -

2-5. Remarks

Failure to follow the cautions may result, worst case, in a short circuit and smoking when the product is used.

The above notices are for standard applications and conditions. Contact us when the products are used

in special mounting conditions. Select optimum conditions for operation as they determine the reliability of

the product after assembly. The data herein are given in typical values, not guaranteed ratings.

EGEVA03

9 / 23

Reference only

Caution

3. Limitation of applications

The products listed in the specification(hereinafter the product(s) is called as the “Product(s)”) are designed and manufactured

for applications specified in the specification. (hereinafter called as the “Specific Application”)

We shall not warrant anythingꢀin connection with the Products including fitness, performance, adequateness, safety,

or quality, in the case of applications listed in from (1) to (11) written at the end of this precautions, which may generally

require high performance, function, quality, management of production or safety.

Therefore, the Product shall be applied in compliance with the specific application.

WE DISCLAIM ANY LOSS AND DAMAGES ARISING FROM OR IN CONNECTION WITH THE PRODUCTS

INCLUDING BUT NOT LIMITED TO THE CASE SUCH LOSS AND DAMAGES CAUSED BY THE

UNEXPECTED ACCIDENT, IN EVENT THAT (i) THE PRODUCT IS APPLIED FOR THE PURPOSE WHICH

IS NOT SPECIFIED AS THE SPECIFIC APPLICATION FOR THE PRODUCT, AND/OR (ii) THE PRODUCT

IS APPLIED FOR ANY FOLLOWING APPLICATION PURPOSES FROM (1) TO (11) (EXCEPT THAT SUCH

APPLICATION PURPOSE IS UNAMBIGUOUSLY SPECIFIED AS SPECIFIC APPLICATION FOR THE

PRODUCT IN OUR CATALOGꢀSPECIFICATION FORMS, DATASHEETS, OR OTHER DOCUMENTS

OFFICIALLY ISSUED BY US*)

1. Aircraft equipment

2. Aerospace equipment

3. Undersea equipment

4. Power plant control equipment

5. Medical equipment

6. Transportation equipment

7. Traffic control equipment

8. Disaster prevention/security equipment

9. Industrial data-processing equipment

10. Combustion/explosion control equipment

11. Equipment with complexity and/or required reliability equivalent to the applications listed in the above.

For exploring information of the Products which will be compatible with the particular purpose other than those specified

in the specification, please contact our sales offices, distribution agents, or trading companies with which you make a deal,

or via our web contact form.

Contact form: https://www.murata.com/contactform

*We may design and manufacture particular Products for applications listed in (1) to (11). Provided that,

in such case we shall unambiguously specify such Specific Application in the specification without any exception.

Therefore, any other documents and/or performances, whether exist or non-exist, shall not be deemed as

the evidence to imply that we accept the applications listed in (1) to (11).

Notice

■Rating

1. Operating Temperature

1. The operating temperature limit depends on the capacitor.

1-1. Do not apply temperatures exceeding the upper operating temperature. It is necessary to select a capacitor with

a suitable rated temperature that will cover the operating temperature range. It is also necessary to consider

the temperature distribution in equipment and the seasonal temperature variable factor.

1-2. Consider the self-heating factor of the capacitor. The surface temperature of the capacitor shall be the upper

operating temperature or less when including the self-heating factors.

2. Atmosphere Surroundings (gaseous and liquid)

1. Restriction on the operating environment of capacitors.

1-1. Capacitors, when used in the above, unsuitable, operating environments may deteriorate due to the corrosion

of the terminations and the penetration of moisture into the capacitor.

1-2. The same phenomenon as the above may occur when the electrodes or terminals of the capacitor are subject

to moisture condensation.

1-3. The deterioration of characteristics and insulation resistance due to the oxidization or corrosion of terminal

electrodes may result in breakdown when the capacitor is exposed to corrosive or volatile gases or solvents

for long periods of time.

3. Piezo-electric Phenomenon

1. When using high dielectric constant type capacitors in AC or pulse circuits, the capacitor itself vibrates at specific frequencies

and noise may be generated. Moreover, when the mechanical vibration or shock is added to the capacitor, noise may occur.

EGEVA03

10 / 23

Reference only

Notice

■Soldering and Mounting

1. PCB Design

1. Notice for Pattern Forms

1-1. Unlike leaded components, chip components are susceptible to flexing stresses since they are mounted directly

on the substrate. They are also more sensitive to mechanical and thermal stresses than leaded components.

Excess solder fillet height can multiply these tresses and cause chip cracking. When designing substrates,

take land patterns and dimensions into consideration to eliminate the possibility of excess solder fillet height.

1-2. There is a possibility of chip cracking caused by PCB expansion/contraction with heat, because stress on a chip is

different depending on PCB material and structure. When the thermal expansion coefficient greatly differs between

the board used for mounting and the chip, it will cause cracking of the chip due to the thermal expansion and

contraction.

Pattern Forms

Prohibited

Correct

Chassis

Solder(ground)

Solder Resist

Placing Close to Chassis

in section

Electrode Pattern

Lead Wire

Solder Resist

Placing

of Chip Components

and Leaded Components

in section

Soldering Iron

Solder Resist

Lead Wire

Placing

of Leaded Components

after Chip Component

in section

Land

The part that

tends to have

Solder Resist

Lateral Mounting *

excessive solder

*When the capacitors are mounted in parallel and share the land, separate the land by solder resist to avoid excessive solder.

2. Land Dimensions

2-1. Chip capacitors can be cracked due to the stress of PCB

bending, etc. if the land area is larger than needed and

has an excess amount of solder. Please refer to the land

dimensions in the following table for reflow soldering.

Please confirm the suitable land dimension by evaluating

of the actual SET / PCB.

Unit：mm

a

b

c

5.7

1.65

3.0

EGEVA03

11 / 23

Reference only

Notice

3. Board Design

When designing the board, keep in mind that the amount of strain which occurs will increase depending on the size

and material of the board.

Relationship with amount of strain to the board thickness, length, width, etc.]

3PL

Relationshipbetweenloadandstrain

ε=

2Ewh²

ε：Strain on center of board (μst)

L：Distance between supporting points (mm)

P

Y

w

h

E

Y

P

：Board width (mm)

：Board thickness (mm)

：Elastic modulus of board (N/m²=Pa)

：Deflection (mm)

h

：Load (N)

w

L

When the load is constant, the following relationship can be established.

· As the distance between the supporting points (L) increases,the amount of strain also increases.

→Reduce the distance between the supporting points.

· As the elastic modulus (E) decreases, the amount of strain increases.

→Increase the elastic modulus.

·

As the board width (w) decreases, the amount of strain increases.

→Increase the width of the board.

As the board thickness (h) decreases, the amount of strain increases.

·

→Increase the thickness of the board.

Since the board thickness is squared, the effect on the amount of strain becomes even greater.

4. Washing

1. Please evaluate the capacitor using actual cleaning equipment and conditions to confirm the quality, and select the

solvent for cleaning.

2. Unsuitable cleaning solvent may leave residual flux or other foreign substances, causing deterioration of electrical

characteristics and the reliability of the capacitors.

3. Select the proper cleaning conditions.

3-1. Improper cleaning conditions (excessive or insufficient) may result in deterioration of the performance of the capacitors.

5. Coating

1. A crack may be cause in the capacitor due to the stress of the thermal contraction of the resin during curing process. The

stress is affected by the amount of resin and curing contraction. Select a resin with low curing contraction. The difference

in the thermal expansion coefficient between a coating resin or a molding resin and the capacitor may cause the

destruction and deterioration of the capacitor such as a crack or peeling, and lead to the deterioration of insulation

resistance or dielectric breakdown. Select a resin for which the thermal expansion coefficient is as close to that of the

capacitor as possible. A silicone resin can be used as an under-coating to buffer against the stress.

2. Select a resin that is less hygroscopic. Using hygroscopic resins under high humidity conditions may cause

the deterioration of the insulation resistance of a capacitor. An epoxy resin can be used as a less hygroscopic resin.

■Other

1. Transportation

1. The performance of a capacitor may be affected by the conditions during transportation.

1-1. The capacitors shall be protected against excessive temperature, humidity, and mechanical force during

transportation.

・ Mechanical condition

Transportation shall be done in such a way that the boxes are not deformed and forced are not directly passed

on to the inner packaging.

1-2. Do not apply excessive vibration, shock, or pressure to the capacitor.

(1) When excessive mechanical shock or pressure is applied to a capacitor, chipping or cracking may occur

in the ceramic body of the capacitor.

(2) When the sharp edge of an air driver, a soldering iron, tweezers, a chassis, etc. impacts strongly on the surface

of the capacitor, the capacitor may crack and short-circuit.

1-3. Do not use a capacitor to which excessive shock was applied by dropping, etc. A capacitor dropped accidentally

during processing may be damaged.

EGEVA03

12 / 23

Reference only

Notice

2. Characteristics Evaluation in the Actual System

1. Evaluate the capacitor in the actual system, to confirm that there is no problem with the performance and specification

values in a finished product before using.

2. Since a voltage dependency and temperature dependency exists in the capacitance of high dielectric type ceramic

capacitors, the capacitance may change depending on the operating conditions in the actual system. Therefore,

be sure to evaluate the various characteristics, such as the leakage current and noise absorptivity, which will affect

the capacitance value of the capacitor.

3. In addition, voltages exceeding the predetermined surge may be applied to the capacitor by the inductance in the actual

system. Evaluate the surge resistance in the actual system as required.

Note

1. Please make sure that your product has been evaluated in view of your specifications with our product being mounted

to your product.

2. You are requested not to use our product deviating from this specification.

EGEVA03

13 / 23

Reference only

1. Application

This specification is applied to Safety Standard Certified Resin Molding SMD Type Multilayer Ceramic

Capacitors Type TF in accordance with AEC-Q200 requirements.

The safety standard certification is obtained by Class X1, Y2.

1-1.Specific applications:

･Automotive powertrain/safety equipment: Products that can be used for automotive equipment related

to running, turning, stopping, safety devices, etc., or equipment whose structure, equipment, and

performance are legally required to meet technical standards for safety assurance or environmental

protection.

･Automotive infotainment/comfort equipment: Products that can be used for automotive equipment such

as car navigation systems and car audio systems that do not directly relate to human life and whose

structure, equipment, and performance are not specifically required by law to meet technical standards

for safety assurance or environmental protection.

･Medical equipment [GHTF A/B/C] except for implant equipment

Products suitable for use in medical devices designated under the GHTF/IMDRF international

classifications as Class A or Class B (the functions of which are not directly involved in protection of

human life or property) or in medical devices other than implants designated under the GHTF/IMDRF

international classifications as Class C (the malfunctioning of which is considered to pose a

comparatively high risk to the human body).

･Consumer equipment: Products that can be used in consumer equipment such as home appliances,

audio/visual equipment, communication equipment, information equipment, office equipment, and

household robotics, and whose functions are not directly related to the protection of human life and

property.

･Industrial equipment: Products that can be used in industrial equipment such as base stations,

manufacturing equipment, industrial robotics equipment, and measurement equipment, and whose

functions do not directly relate to the protection of human life and property.

1-2.Unsuitable Application: Applications listed in “Limitation of applications” in this product specification.

Approval standard and certified number

Standard number

*Certified number

Rated voltage

UL60384-14/

E37921

UL/cUL

X1: AC305 V(r.m.s.) / DC1500 V

Y2: AC305 V(r.m.s.) / DC1500 V

CSA E60384-14

ENEC (VDE)

40056291

EN60384-14

*Above Certified number may be changed on account of the revision of standards and

the renewal of certification.

2. Rating

2-1. Operating temperature range

-55 to 125°C

2-2. Rated voltage

X1: AC305 V(r.m.s.) / DC1500 V

Y2: AC305 V(r.m.s.) / DC1500 V

2-3. Part name configuration

ex.) EVA

Series Body Dimension Temperature Certified Capacitance Capacitance Individual Package

Dimension (T) Characteristic Type Tolerance Specification

86

Q

7U

TF

472

K

B01

K

•Body Dimension

Code

86

Body Dimension (mm)

8.0 × 6.0

ETEVA8602

14 / 23

Reference only

•Dimension(T)

Code

Q

Dimension (mm)

3.7

Please refer to [Part number list] on the dimensions of metal terminal product.

•Temperature Characteristic

Code

Public STD Code

U2J

(EIA)

7U

Please confirm detailed specification on [Specification and test methods].

• Certified Type

This denotes safety certified type name Type TF.

•Capacitance

The first two digits denote significant figures ; the last digit denotes the multiplier of 10 in pF.

ex.) In case 472.

47×10²= 4700 pF

•Capacitance Tolerance

Please refer to [Part number list].

• Individual Specification

Code

Individual Specification

B01

Terminal style : Inside bending

•Package

Code

K

Package

φ330 mm reel Plastic taping

2-4. Marking

Certified Type

Capacitance

: Code

: 3 digit system

Company name : Abbreviation

472

ETEVA8602

15 / 23

Reference only

3. Part number list

Unit : mm

Dimension(mm)

W

Cap.

Pack qty.

(pcs)

T.C.

tol.

Customer Part Number

Murata Part Number

(pF)

L

T

(%)

U2J 100 ±10

U2J 150 ±10

U2J 220 ±10

U2J 330 ±10

U2J 470 ±10

U2J 680 ±10

U2J 1000 ±10

U2J 1500 ±10

U2J 2200 ±10

U2J 3300 ±10

U2J 4700 ±10

EVA86Q7UTF101KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF151KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF221KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF331KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF471KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF681KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF102KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF152KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF222KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF332KB01K 8.4±0.5 6.0±0.5 3.7±0.5

EVA86Q7UTF472KB01K 8.4±0.5 6.0±0.5 3.7±0.5

1000

ETEVA8602

16 / 23

Reference only

4. Specification

No.

Test Item

Specification

Test Method

1

Pre-and Post-Stress Electrical Test

-

2

High Temperature Exposure

(Storage)

The measured and observed characteristics should

satisfy the specifications in the following table.

Set the capacitor for 1,000±12 h at 150±3 ℃.

Let sit for 24±2 h at *room condition, then measure.

Appearance

No marking defects

Capacitance

Change

Within ±5.0 % or ±0.5 pF

(Whichever is larger)

Q

500 or more

I.R.

More than 1,000 MΩ or 50 MΩ･μF

(Whichever is smaller)

3

Temperature Cycle

The measured and observed characteristics should

satisfy the specifications in the following table.

Fix the capacitor to the supporting jig in the same manner and under the same

conditions as (No.18). Perform the 1,000 cycles according to the four heat

treatments listed in the following table.

Let sit for 24±2 h at *room condition, then measure.

Appearance

No marking defects

Capacitance

Change

Within ±5.0 % or ±0.5 pF

(Whichever is larger)

Step

1

2

3

4

Q

500 or more

Temp. (℃)

Time (min)

-55+0/-3

15±3

Room Temp.

1

125+3/-0

15±3

Room Temp.

1

I.R.

More than 1,000 MΩ or 50 MΩ･μF

(Whichever is smaller)

Dielectric Strength Per Item 16

4

Destructive

No defects or abnormalities

Per EIA-469

Physical Analysis

5-1 Humidity Loading (AC)

The measured and observed characteristics should

satisfy the specifications in the following table.

Apply the AC305 V(r.m.s.) for 1,000±12 h at 85±3 ℃ in 80 to 85 % relative

humidity.

Remove and let sit for 24±2 h at *room condition, then measure.

The change/discharge current is less than 50 mA.

Appearance

No marking defects

Capacitance

Change

Within ±6.0 % or ±0.6 pF

(Whichever is larger)

Q

200 or more

I.R.

More than 100 MΩ or 5 MΩ･μF

(Whichever is smaller)

5-2 Biased Humidity (Humidity Loading

(DC))

The measured and observed characteristics should

satisfy the specifications in the following table.

Apply the rated voltage (DC1500 V) and DC1.3+0.2/-0 V (add 100 kΩ resistor)

at 85±3 ℃ and 80 to 85 % humidity for 1,000±12 h.

Remove and let sit for 24±2 h at *room condition, then measure.

Appearance

No marking defects

The change/discharge current is less than 50 mA.

Capacitance

Change

Within ±6.0 % or ±0.6 pF

(Whichever is larger)

Q

200 or more

I.R.

More than 100 MΩ or 5 MΩ･μF

(Whichever is smaller)

*room condition : Temperature : 15 to 35 ℃, Relative humidity : 45 to 75 %, Atmosphere pressure : 86 to 106 kPa

ESEVA8602

17 / 23

Reference only

Test Item

No.

6-1 Operating Life (AC)

Specification

Test Method

The measured and observed characteristics should

satisfy the specifications in the following table.

Impulse voltage

Each individual capacitor should be subjected to a 5 kV impulses for three

times or more. Then the capacitors are applied to life test.

Appearance

No marking defects

Capacitance

Change

Within ±6.0 % or ±0.6 pF

(Whichever is larger)

Front time (T1) = 1.7 μs = 1.67T

Time to half-value (T2) = 50 μs

Q

350 or more

I.R.

More than 100 MΩ or 5 MΩ･μF

(Whichever is smaller)

Dielectric Strength Per Item 16

The capacitors are placed in a circulating air oven for a period of 1,000 h.

The air in the oven is maintained at maximum operating temperature +2/-0 °C,

and relative humidity of 50 % max..

The charge/discharge current is less than 50 mA.

Throughout the test, the capacitors are subjected to AC519 V(r.m.s.) (170 % of

ac rated voltage) <50/60 Hz> alternating voltage of mains frequency, except

that once each hour the voltage is increased to AC1000 V(r.m.s.) for 0.1 s.

6-2 Operating Life (DC)

The measured and observed characteristics should

Impulse voltage

satisfy the specifications in the following table.

Each individual capacitor should be subjected to a 5 kV impulses for three

times or more. Then the capacitors are applied to life test.

Appearance

No marking defects

Capacitance

Change

Within ±6.0 % or ±0.6 pF

(Whichever is larger)

Front time (T1) = 1.7 μs = 1.67T

Time to half-value (T2) = 50 μs

Q

350 or more

I.R.

More than 100 MΩ or 5 MΩ･μF

(Whichever is smaller)

Dielectric Strength Per Item 16

Apply DC2550 V (170 % of dc rated voltage) for 1,000±12 h at maximum

operating temperature +2/-0 ℃, and relative humidity of 50 % max..

Remove and let sit for 24±2 h at *room condition, then measure. The

change/discharge current is less than 50 mA.

No defects or abnormalities

External Visual

Physical Dimension

Marking

7

8

9

Visual inspection

Within the specified dimensions

To be easily legible

Using calipers and micrometers.

The capacitor should be inspected by naked eyes.

10 Resistance to

Solvents

The measured and observed characteristics should

satisfy the specifications in the following table.

Per MIL-STD-202 Method 215.

Solvent 1 : 1 part (by volume) of isopropyl alcohol

3 parts (by volume) of mineral spirits

Solvent 3 : Terpene defluxer

Solvent 4 : 42 parts (by volume) of water

1 part (by volume) of propylene glycol

monomethyl ether

Appearance

No marking defects

Within the specified tolerance

500 or more

Capacitance

Q

1 part (by volume) of monoethanolomine

I.R.

More than 1,000 MΩ or 50 MΩ･μF

(Whichever is smaller)

11 Mechanical shock

The measured and observed characteristics should

satisfy the specifications in the following table.

Three shocks in each direction should be applied along 3 mutually

perpendicular axes of the test specimen (18 shocks).

The specified test pulse should be half sine and should have a duration : 0.5

ms, peak value : 1,500 g and velocity change : 4.7 m/s.

Appearance

Capacitance

Q

No marking defects

Within the specified tolerance

500 or more

12 Vibration

The measured and observed characteristics should

satisfy the specifications in the following table.

Solder the capacitor to the test jig (glass epoxy board) in the same manner and

under the same conditions as (No.18).

The capacitor should be subjected to a simple harmonic motion having a total

amplitude of 1.5 mm, the frequency being valid uniformly between the

approximate limits of 10 and 2,000 Hz.

The frequency range, from 10 to 2,000 Hz and return to 10 Hz, should be

traversed in approximately 20 min. This motion should be applied for 12 items

in each 3 mutually perpendicular directions (total of 36 times).

Appearance

Capacitance

Q

No marking defects

Within the specified tolerance

500 or more

^*room condition : Temperature : 15 to 35 ℃, Relative humidity : 45 to 75 %, Atmosphere pressure : 86 to 106 kPa

ESEVA8602

18 / 23

Reference only

Test Item

No.

Specification

Test Method

Reflow Soldering : Peak 260+0/-5 ℃

The area of soldering 230 ℃ min.、20 to 40 s

13 Resistance to Soldering Heat

The measured and observed characteristics should

satisfy the specifications in the following table.

Let sit for 24±2 h at *room condition, then measure.

Appearance

No marking defects

Within the specified tolerance

500 or more

Capacitance

Q

300 ℃

260+0/-5 ℃

230℃ min

20 to 40 s

I.R.

More than 1,000 MΩ or 50 MΩ･μF

(Whichever is smaller)

200 ℃

180 ℃

Dielectric

Strength

Per Item 16

150 ℃

100 ℃

60 to 120 s

14 ESD

The measured and observed characteristics should

satisfy the specifications in the following table.

Per AEC-Q200-002

Appearance

No marking defects

Within the specified tolerance

500 or more

Capacitance

Q

I.R.

More than 1,000 MΩ or 50 MΩ･μF

(Whichever is smaller)

15 Solderability

The connection between the board and the metal

terminals is covered with solder without opening.

The solder should be at least 0.3 mm wet in height.

Preheat at 155 ℃ for 4 h.

After the preheating, following test is done.

Reflow Soldering : Peak 260+0/-5 ℃

The area of soldering 230 ℃ min., 20 to 40 s.

300 ℃

260+0/-5 ℃

230℃ min

20 to 40 s

200 ℃

180 ℃

150 ℃

60 to 120 s

16 Electrical

Characteriz-

ation

Appearance

Capacitance

No defects or abnormalities

Within the specified tolerance

Visual inspection

The capacitance/Q should be measured at 25 ℃ at the frequency and voltage

shown in the table.

Nominal

Capacitance

Measuring

frequency

Measuring

voltage

C<1000 pF

1±0.1 MHz

1±0.1 kHz

AC1.0±0.2 V(r.m.s.)

C≧1000 pF

Q

500 or more

I.R. 25℃

More than 10,000 MΩ or 100 MΩ･μF

(Whichever is smaller)

The insulation resistance should be measured with AC500±50 V at 25 ℃ and

125 ℃ within 2min. of charging.

I.R. 125℃

More than 1,000 MΩ or 100 MΩ･μF

(Whichever is smaller)

Dielectric Strength No failure

(Between

Terminals)

No failure should be observed when voltage in the table is applied between the

terminations for 60±1 s, provided the charge/discharge current is less than 50

mA.

Test voltage is AC2000 V(r.m.s.) and DC4000 V.

Dielectric Strength No failure

(Terminal To

External Resin)

No failure should be observed when voltage in the table is applied between the

terminations for 60±1 s, provided the charge/discharge current is less than 50

mA.

Test voltage is AC2110 V(r.m.s.) and DC4000 V.

^*room condition : Temperature : 15 to 35 ℃, Relative humidity : 45 to 75 %, Atmosphere pressure : 86 to 106 kPa

ESEVA8602

19 / 23

Reference only

Test Item

No.

Specification

Test Method

17 Board Flex

The measured and observed characteristics should

satisfy the specifications in the following table.

Solder the capacitor on the test jig (glass epoxy board) shown in Fig. 1 using

solder. Then apply a force in the direction shown in Fig. 2 for 60 s. Then

soldering should be done by the reflow method and should be conducted with

care so that the soldering is uniform and free of defects such as heat shock.

Appearance

No marking defects

Capacitance

Change

Within ±10.0 % or ±1.0 pF

(Whichever is larger)

Test jig

Dimension (mm)

material : glass epoxy board

Thickness : 1.6 mm

a

b

c

20 50

Pressurizing

speed:1.0mm/s

Pressurize

5.7

9.0

3.0

Land dimension

R4

a

b

Flexure:5 mm

Capacitance meter

45

Fig. 2

Fig. 1

18 Terminal Strength

The measured and observed characteristics should

satisfy the specifications in the following table.

Solder the capacitor to the test jig (glass epoxy board) shown in Fig. 3 using

solder. Then apply 18 N force in parallel with the test jig for 60 s.

The soldering should be done by the reflow method and should be conducted

with care so that the soldering is uniform and free of defects such as heat

shock.

Appearance

No marking defects

Within specified tolerance

500 or more

Capacitance

Q

Dimension (mm)

Land dimension

I.R.

More than 1,000 MΩ or 50 MΩ･μF

(Whichever is smaller)

a

b

c

5.7

9.0

3.0

a

b

Test jig

material : glass epoxy board

Thickness : 1.6 mm

Fig. 3

19 Beam Load Test

Destruction value should be exceed following one.

54.5 N

Please the capacitor in the beam load fixture as in Fig. 4

Apply a force.

Speed supplied the Stress Load : 2.5 mm/s

0.6L

Fig. 4

20 Capacitance

Temperature

Temp.

Coefficient

The capacitance change should be measured after 5 min. at each specified

temperature stage.

-750±120 ppm/℃

（Temp. Range : 25 to 125 ℃）

-750+120、-347 ppm/℃

Characteristics

The range of capacitance change compared with the above 25 ℃ value over

the temperature ranges shown in the table should be within the specified

ranges.

（Temp. Range : -55 to 25 ℃）

Capacitance

Drift

Within ±0.5 % or ±0.05 pF

(Whichever is larger)

Step

Temperature (℃)

25±2

1

2

3

4

5

-55±3

25±2

125±3

25±2

ESEVA8602

20 / 23

Reference only

Test Item

No.

21 Active Flammability

Specification

The cheese-cloth should not be on fire.

Test Method

The capacitors should be individually wrapped in at least one, but not more than

two, complete layers of cheese-cloth. The capacitor should be subjected to 20

discharges. The interval between successive discharges should be 5 s. The

UAc should be maintained for 2 min. after the last discharge.

C1,2 : 1 μF±10 %, C3 : 0.033 μF±5 % 10 kV

L1~4 : 1.5 mH±20 % 16 A Rod core choke

R

: 100 Ω±2 %, Ct : 3 μF±5 % 10 kV

UAc : UR±5 %, UR : Rated working voltage

Cx : Capacitor under test

F

: Fuse, Rated 10 A

Ut : Voltage applied to Ct

22 Passive Flammability

The burning time should not be exceeded the time 30 s. The capacitor under test should be held in the flame in the position which best

The tissue paper should not ignite.

promotes burning.

Time of exposure to flame is for 30 s.

Length of flame：12±1 mm

Gas burner

：Length 35 mm min.

Inside Dia. 0.5±0.1 mm

Outside Dia. 0.9 mm max.

Gas : Butane gas Purity 95 % min.

ESEVA8602

21 / 23

Reference only

5. Packing

(1) Appearance of taping

(a) Plastic Tape

Cover Tape (Thickness : Around 60 µm) is put on capacitor on Base Tape (Blister carrier Tape).

(b) The sprocket holes are to the right as the Tape is pulled toward the user.

(2) Packed capacitors

Capacitor

(3) Dimensions of Tape

2.0±0.1

φ1.5+0.1/-0

4.0±0.1

12.0±0.1

0.4±0.1

A

4.5 max.

A

B

6.6 (typ.)

8.9 (typ.)

(Unit : mm)

(4) Dimensions of Reel

21.4±1.0

2.0±0.5

φ21±0.8

330±2.0

φ13±0.2

(Unit : mm)

17.4±1.0

EKTK8602

22 / 23

Reference only

(5) Part of the leader and part of the empty tape should be attached to the end of the tape as follows.

210 min.

Vacant section : 160 min.

Capacitors mounting unit

Vacant section : 190 min.

Direction of feed

(Unit : mm)

(6) The top tape or cover tape and base tape are not attached at the end of the tape for a minimum of

5 pitches.

(7) Missing capacitors number within 0.1 % of the number per reel or 1 pc, whichever is greater, and not

continuous.

(8) The top tape or cover tape and bottom tape should not protrude beyond the edges of the tape and

should not cover sprocket holes.

(9) Cumulative tolerance of sprocket holes, 10 pitches : ±0.3 mm.

(10) Peeling off force : 0.1 to 0.6 N in the direction shown on the follows.

165 to 180°

Top Tape or Cover Tape

Base Tape

EKTK8602

23 / 23


型号：	EVA86Q7UTF331KB01#
厂家：	muRata
描述：	汽车[动力总成 / 安全设备],汽车[信息娱乐 / 舒适设备],民用设备,工业设备,移动设备,植入式以外的医疗器械设备 [GHTF A/B/C] 医疗医疗器械
文件：	总24页 (文件大小：1111K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

EVA86Q7UTF331KB01# [MURATA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E