GA355DR7GC332KY02L [MURATA]
Ceramic Capacitor, Multilayer, Ceramic, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0033uF, Surface Mount, 2220, CHIP;型号: | GA355DR7GC332KY02L |
厂家: | muRata |
描述: | Ceramic Capacitor, Multilayer, Ceramic, 10% +Tol, 10% -Tol, X7R, 15% TC, 0.0033uF, Surface Mount, 2220, CHIP 电容器 |
文件: | 总5页 (文件大小:99K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
Chip Monolithic Ceramic Capacitors
Safety Standard Recognized Type GC (UL, IEC60384-14 Class X1/Y2)
e
g
e
■ Features
1. Chip monolithic ceramic capacitor (certified as
conforming to safety standards) for AC lines.
2. A new monolithic structure for small, high
capacitance capable of operating at high voltage
levels.
L
W
3. Compared to lead type capacitors, this new
capacitor is greatly downsized and low-profiled to
1/10 or less in volume, and 1/4 or less in height.
4. The type GC can be used as an X1-class and Y2-class
capacitor, line-by-pass capacitor of UL1414.
5. +125 degree C guaranteed.
Dimensions (mm)
e min.
Part Number
L
W
T
g min.
4.0
GA355D
5.7 ±0.4 5.0 ±0.4 2.0 ±0.3
0.3
6. Only for reflow soldering.
■ Standard Recognition
■ Applications
Status of Recognition
Rated
Voltage
Standard No.
1. Ideal for use as Y capacitor or X capacitor for
various switching power supplies
2. Ideal for modem applications
Type GB
Type GC
UL
UL1414
Yꢀ
Y
BSI
VDE
SEV
SEMKO
AC250V
(r.m.s.)
EN132400
EN132400 Class
X2
X1, Y2
: Line-By-Pass only
Electrode g
Rated Voltage
(V)
TC Code
(Standard)
Capacitance
(pF)
Length L Width W Thickness T
Electrode e
(mm)
Part Number
min.
(mm)
(mm)
(mm)
(mm)
GA355DR7GC101KY02L
GA355DR7GC151KY02L
GA355DR7GC221KY02L
GA355DR7GC331KY02L
GA355DR7GC471KY02L
GA355DR7GC681KY02L
GA355DR7GC102KY02L
GA355DR7GC152KY02L
GA355DR7GC222KY02L
GA355DR7GC332KY02L
GA355DR7GC472KY02L
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
AC250 (r.m.s.)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
X7R (EIA)
100 ±10%
150 ±10%
220 ±10%
330 ±10%
470 ±10%
680 ±10%
1000 ±10%
1500 ±10%
2200 ±10%
3300 ±10%
4700 ±10%
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.7
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
4.0
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
0.3 min.
18
121
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
GA3 Series Specifications and Test Methods
Specifications
No.
1
Item
Operating
Test Method
Y55 to W125D
Y
Temperature Range
Visual inspection
Using calipers
2
3
Appearance
No defects or abnormalities
Dimensions
Within the specified dimensions
No failure should be observed when voltage in table is applied
between the terminations for 60T1 sec., provided the
charge/discharge current is less than 50mA.
4
5
Dielectric Strength No defects or abnormalities
Test voltage
Type GB
DC1075V
Type GC/GD/GF
AC1500V (r.m.s.)
10 impulse of alternating polarity is subjected.
No self healing break downs or flash-overs have taken place in (5 impulse for each polarity)
Pulse Voltage
(Application: Type
GD/GF)
the capacitor.
The interval between impulse is 60 sec.
Applied Voltage : 2.5kV zero to peak
The insulation resistance should be measured with DC500T50V
and within 60T5 sec. of charging.
Insulation Resistance
(I.R.)
6
7
More than 6,000MΩ
Capacitance
Within the specified tolerance
The capacitance/Q/D.F. should be measured at 20D at a
frequency of 1T0.2kHz (SL char. : 1T0.2MHz) and a voltage of
AC1T0.2V (r.m.s.).
Char.
Specification
Dissipation
Factor (D.F.)
Q
D.F.V0.025
X7R
#Pretreatment for X7R char.
8
2
W00
Y10
QU400+20C* (CF30pF)
QU1000
Perform a heat treatment at 150
D for 60T5 min. and then
SL
(CU30pF)
1
let sit for 24T2 hrs. at * room condition.
Char.
X7R
Capacitance Change
The range of capacitance change compared with the 25D (SL
char. : 20D) value within Y55 to W125D should be within the
specified range.
Within T15%
Capacitance
Temperature
Characteristics
Temperature characteristic guarantee is Y55 to W125D
9
#Pretreatment for X7R char.
Char.
SL
Temperature Coefficient
+350 to -1000ppm/D
W00
Y10
Perform a heat treatment at 150
D for 60T5 min. and then
1
let sit for 24T2 hrs. at * room condition.
Temperature characteristic guarantee is W20 to W85D
Appearance
No defects or abnormalities
As in Fig., discharge is made 50 times at 5 sec. intervals from
the capacitor (Cd) charged at DC voltage of specified.
I.R.
More than 1,000MΩ
R3
R1
Discharge
Test
10
R2
Ct
(Application:
Type GC)
10kV
V
Dielectric
Strength
Cd
In accordance with item No.4
Ct : Capacitor under test Cd : 0.001µF
R1 : 1,000Ω R2 : 100MΩ R3 : Surge resistance
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 1 using a eutectic solder. Then apply 10N force in the
direction of the arrow. The soldering should be done either with
an iron or using the reflow method and should be conducted with
care so that the soldering is uniform and free of defects such as
heat shock.
Adhesive Strength
of Termination
11
No removal of the terminations or other defect should occur.
10N, 10T1s
Speed : 1.0mm/s
Glass Epoxy Board
Fig. 1
*1 "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmospheric pressure : 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
21
125
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
GA3 Series Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Test Method
Appearance
No defects or abnormalities
Within the specified tolerance
Solder the capacitor to the test jig (glass epoxy board).
The capacitor should be subjected to a simple harmonic motion
having a total amplitude of 1.5mm, the frequency being varied
uniformly between the approximate limits of 10 and 55Hz. The
frequency range, from 10 to 55Hz and return to 10Hz, should be
traversed in approximately 1 min. This motion should be applied
for a period of 2 hrs. in each 3 mutually perpendicular directions
(total of 6 hrs.).
Capacitance
Vibration
Resistance
12
Char.
Specification
D.F.
Q
D.F.V0.025
QU400+20C* (CF30pF)
X7R
2
SL
QU1000
(CU30pF)
Solder resist
Cu
Glass Epoxy Board
No cracking or marking defects should occur.
Solder the capacitor to the testing jig (glass epoxy board) shown
in Fig. 2 using a eutectic solder. Then apply a force in the
direction shown in Fig. 3. The soldering should be done either
with an iron or using the reflow method and should be conducted
with care so that the soldering is uniform and free of defects such
as heat shock.
b
φ4.5
d
c
a
50
t : 1.6
Pressurizing
20
100
speed : 1.0mm/s
13 Deflection
Pressurize
Dimension (mm)
LZW
R230
(mm)
a
b
c
d
4.5Z2.0
4.5Z3.2
5.7Z2.8
5.7Z5.0
3.5
3.5
4.5
4.5
7.0
7.0
8.0
8.0
2.4
3.7
3.2
5.6
Flexure=1
1.0
Capacitance meter
45 45
(in mm)
Fig. 2
Fig. 3
Immerse the capacitor in a solution of ethanol (JIS-K-8101) and
rosin (JIS-K-5902) (25% rosin in weight proportion).
Immerse in eutectic solder solution for 2T0.5 sec. at 235T5D.
Immersing speed : 25T2.5mm/s
Solderability of
Termination
14
75% of the terminations are to be soldered evenly and continuously.
No marking defects
Preheat the capacitor as table. Immerse the capacitor in
Appearance
eutectic solder solution at 260T5D for 10T1 sec. Let sit at
1
* room condition for 24T2 hrs., then measure.
Char.
X7R
Capacitance Change
Within T10%
#Immersing speed : 25T2.5mm/s
Capacitance
Change
#Pretreatment for X7R char.
Within T2.5% or T0.25pF
(Whichever is larger)
SL
W00
Y10
Resistance
15 to Soldering
Heat
Perform a heat treatment at 150
D for 60T5 min. and then
1
let sit for 24T2 hrs. at * room condition.
I.R.
More than 1,000MΩ
*Preheating
Step
1
2
Temperature
100D to 120D
170D to 200D
Time
1 min.
1 min.
Dielectric
Strength
In accordance with item No.4
*1 "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmospheric pressure : 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
21
126
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
GA3 Series Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Test Method
Fix the capacitor to the supporting jig (glass epoxy board) shown
in Fig. 4 using a eutectic solder.
Appearance
No marking defects
Perform the 5 cycles according to the 4 heat treatments listed in
the following table.
Let sit for 24T2 hrs. at * room condition, then measure.
Char.
X7R
Capacitance Change
Within T15%
Within T2.5% or T0.25pF
(Whichever is larger)
Capacitance
Change
1
SL
Time (min.)
30T3
2 to 3
30T3
2 to 3
Temperature (D)
Min. Operating Temp.T3
Room Temp.
Max. Operating Temp.T2
Room Temp.
Step
1
2
3
4
Char.
X7R
Specification
D.F.
Q
D.F.V0.05
2
QU400+20C* (CF30pF)
Temperature
Cycle
SL
16
QU1000
(CU30pF)
#Pretreatment for X7R char.
W00
Y10
Perform a heat treatment at 150
D for 60T5 min. and then
I.R.
More than 3,000MΩ
1
let sit for 24T2 hrs. at * room condition.
Dielectric
Strength
Solder resist
Cu
In accordance with item No.4
No marking defects
Glass Epoxy Board
Fig. 4
Appearance
Char.
Capacitance Change
Capacitance
Change
X7R
Within T15%
Within T5.0% or T0.5pF
(Whichever is larger)
Let the capacitor sit at 40T2D and relative humidity of 90 to 95%
for 500T12 hrs.
SL
1
Remove and let sit for 24T2 hrs. at * room condition, then
Humidity
measure.
#Pretreatment for X7R char.
Perform a heat treatment at 150
let sit for 24T2 hrs. at * room condition.
17 (Steady
State)
Char.
X7R
Specification
D.F.
Q
D.F.V0.05
W00
Y10
2
QU275+5/2C* (CF30pF)
D for 60T5 min. and then
SL
1
QU350
(CU30pF)
I.R.
More than 3,000MΩ
Dielectric
Strength
In accordance with item No.4
No marking defects
Impulse Voltage
Appearance
T1
=
1.2µs=1.67T
50µs
100 (%)
90
50
30
Each individual capacitor should
be subjected to a 2.5kV (Type
GC/GF : 5kV) Impulses (the
voltage value means zero to
peak) for three times. Then the
capacitors are applied to life test.
T2=
Char.
X7R
Capacitance Change
Within T20%
Capacitance
Change
0
t
T
Within T3.0% or T0.3pF
(Whichever is larger)
T2
SL
W2
Y0
Apply voltage as Table for 1,000 hrs. at 125
humidity 50% max.
D, relative
Char.
X7R
Specification
D.F.
Q
D.F.V0.05
2
18 Life
Type
Applied voltage
AC312.5V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
QU275+5/2C* (CF30pF)
SL
QU350
(CU30pF)
GB
GC
GD
GF
I.R.
More than 3,000MΩ
AC425V (r.m.s.), except that once each hour the
voltage is increased to AC1,000V (r.m.s.) for 0.1 sec.
1
Let sit for 24T2 hrs. at * room condition, then measure.
Dielectric
Strength
In accordance with item No.4
#Pretreatment for X7R char.
W00
Y10
Perform a heat treatment at 150
D for 60T5 min. and then
1
let sit for 24T2 hrs. at * room condition.
*1 "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmospheric pressure : 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
Continued on the following page.
21
127
Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.
This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specificaions before ordering.
!Note
C02E10.pdf 04.1.20
GA3 Series Specifications and Test Methods
Continued from the preceding page.
Specifications
No.
Item
Test Method
Appearance
No marking defects
Char.
X7R
Capacitance Change
Within T15%
Capacitance
Change
Within T5.0% or T0.5pF
(Whichever is larger)
SL
Apply the rated voltage at 40T2D and relative humidity of 90 to
W24
Y00
1
95% for 500
hrs. Remove and let sit for 24T2 hrs. at * room
condition, then measure.
#Pretreatment for X7R char.
Humidity
Loading
19
Char.
X7R
Specification
D.F.
Q
D.F.V0.05
W00
Y10
Perform a heat treatment at 150
D for 60T5 min. and then
2
QU275+5/2C* (CF30pF)
1
let sit for 24T2 hrs. at * room condition.
SL
QU350
(CU30pF)
I.R.
More than 3,000MΩ
In accordance with item No.4
Dielectric
Strength
*1 "Room condition" Temperature : 15 to 35D, Relative humidity : 45 to 75%, Atmospheric pressure : 86 to 106kPa
*2 "C" expresses nominal capacitance value (pF).
21
128
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明