HN-214DX [MURATA]
2.4 GHz Frequency Hopping Wireless Data Modem;型号: | HN-214DX |
厂家: | muRata |
描述: | 2.4 GHz Frequency Hopping Wireless Data Modem 无线 |
文件: | 总3页 (文件大小:217K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DEVELOPER KIT
(Info: click here)
HN-210D
Features:
Benefits:
• 2.4GHz frequency hopping spread
spectrum technology
• Exceptional immunity to multipath
fading and jamming
• 460Kbps over the air and 115Kbps I/O
data rates
• 64 hopping patterns
• FCC certified and CE marked
• Integral 6dB patch antenna
• RS-232 asynchronous serial interface
• Supports high speed applications
needing long range
• Co-location of multiple networks without
interference
• License-free application worldwide
• Cost-effective, simple installation
• Connects to PC serial ports
2.4GHz
Frequency
Hopping Wireless
Data Modem
The HN-210D is a versatile, low cost, multi-purpose 2.4 GHz frequency-hopping wireless data modem. The
HN-210D communicates through a serial port and over the air at 460.8Kbps and supports both point-to-point
and point-to-multipoint networks.
Specifications
HN-210D
HN-210DX
HN-214D
Frequency Band
2401 - 2471 MHz (USA)
2448 - 2480 MHz (France, Spain)
Licensing
Unlicensed under FCC Part 15, ETSI 300.328
75 - US & ETSI, 25 France
Number of Channels
Hopping Patterns
I/O Data Rates
User configurable, 64 patterns (networks) available
Up to 115.2 Kbps asynchronous
RF Channel Rate
Line of Site Range
RF Bandwidth
460 Kbps
> 5 miles
750 KHz
Modulation Type
Output Impedance
Network Protocol
Transmit Power
Receive Sensitivity
Power Requirements
GFSK
50 ohms
Dynamically assigned TDMA with ARQ
EIRP: +16dBm/+24dBm
-99dBm for 10-5 BER
+18dBm
-93 dBm for 10-5 BER
EIRP: +16dBm/+24dBm
-99dBm for 10-5 BER
9 Vdc
160mA typ. 750mA surge
Serial Data Interface
Async. RS-232
www.RFM.com E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 1 of 3
HN-210D - 4/10/08
Mechanical Specifications
HN-210D
HN-210DX
HN-214D
Antenna
Integrated 6dB patch
n/a
Polycarbonate, NEMA 4X
130 x 79 x 35 (excl. flange)
235g
Integrated 6dB patch
Case Materials
Dimensions (mm)
Weight excl. cable
Antenna Connector
Data Connector
Power Connector
n/a
TNC male
n/a
9-Pin D
2 terminal connector
Environmental Specifications
Temperature Range
Humidity
-30°C to +70°C (radio enclosure)
95% at +40°C, Non-condensing
Power supply
Serial adapter box
HN-210D with 50 feet of cable
www.RFM.com
E-mail: info@rfm.com
Page 2 of 3
©2008 by RF Monolithics, Inc.
HN-210D - 4/10/08
Built around the WIT2410 radio, the HN-210D has an integral 6dB patch antenna creating a "single piece" modem. Communication with the HN-210D is
through a 115.2Kbps asynchronous serial port supporting a standard RS-232 interface. The HN-210D communicates over the air at 460.8Kbps and
supports both point-to-point and point-to-multipoint networks.
With a NEMA 4X weatherproof enclosure and aluminum mounting flange, the HN-210D is simple to install on the side of a building or attached to a mast.
With no antenna to connect, the HN-210D is simply mounted where the antenna would ordinarily be mounted. This removes the need for long antenna
cable runs, expensive in terms of both cost and performance.
The HN-210D comes with a 50-foot cable that connects to a DIN-rail mount serial adapter box (standard RS-232 serial 9-pin D connection) making
installation in equipment cabinets simple. The HN-214D comes with a 4-foot cable for use when long cable runs are not needed. The serial adapter box
also provides power to the HN-210D through a universal 110/220 50/60 wall-mount power supply (also included).
The integral 6dB patch antenna provides a line-of-site range of several miles, making the HN-210D ideal for a variety of "last mile" applications. For
applications requiring more antenna gain, the HN-210DX replaces the built-in patch antenna with an external TNC connector.
When paired with the Cirronet SNAP2410 family of products, the HN-210D provides a cost-effective link from remote devices to Ethernet/IP-based
applications. These applications include Intranet-based applications as well as Internet access. The HN-210D also is ideal for use in SCADA applications
as remote modems in multipoint configurations and is an extremely cost-effective solution for point-to-point installations. Selectable transmit power levels
of 10mW and 100mW allow the HN-210D to be used worldwide, even with the gain of the patch antenna.
Based on the Cirronet WIT2410 spread spectrum frequencyhopping radio, the HN-210D has exceptional multipath fade rejection as well as immunity to
jamming. The WIT2410 is a field proven performer that delivers robust, reliable, real-world performance.
The HN-210D is both FCC and CE marked. Operating in the 2.4GHz ISM band, the HN-210D can be deployed around the world without a license.
www.RFM.com
E-mail: info@rfm.com
Page 3 of 3
©2008 by RF Monolithics, Inc.
HN-210D - 4/10/08
相关型号:
©2020 ICPDF网 联系我们和版权申明