LXMSJZNCMF-198 [MURATA]
ultra small paackage;型号: | LXMSJZNCMF-198 |
厂家: | muRata |
描述: | ultra small paackage |
文件: | 总8页 (文件大小:342K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
1, General Descriptions
Murata MAGICSTRAP® is an innovative RFID module which
complies EPC global Gen2 (v2).
This product can be used as an ultra small tag and this can be
fit on any metal objects, non-metal objects, as well as
embedding into any objects by glue or adhesive and so on.
This can be used globally with high performance and reliability.
[Features]
1-1. Compliant with ISO18000-63 and EPC global Gen2(v2)
1-2. Ultra small package (1.25 x 1.25 x 0.55mm )
1-3. Supports wide frequency range from 865MHz to 928MHz, allowing to cover all globally relevant UHF
frequency bands
1-4. 100% green material for RoHS compliance
2, MAGICSTRAP® Block Diagram
Figure.1 shows MAGICSTRAP® block diagram.
Matching
Circuit
Analog F/E
Controller
Memory
&
Antenna
Integrated Circuit
Fig.1 MAGICSTRAP®Block Diagram
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
1
Rev1.1 Oct, 2017
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
3, Mechanical Information
[Dimension]
T
L
<Top View>
W
T
<Side View>
Unit:mm
Dimensions
Mark
L
<Bottom View>
1.25±0.15
1.25±0.15
0.55max.
W
T
Fig.2 MAGICSTRAP® Package Dimension
4. Electrical Performance
4-1. Frequency range
865 – 928 MHz
4-2. Part number / IC / Memory size
P/N
IC
TID
EPC
96bit
LXMSJZNCMF-198
Impinj MonzaR6
96bits
5. Absolute maximum ratings
Symbol
Tstg
Parameter
Min
-40
-40
Max
+85
+85
Unit
℃
Storage temperature
Operating temperature
Ta
℃
6. RoHS compliance
This product is compliant with RoHS directive
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
2
Rev1.1 Oct, 2017
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
7, Reading range (reference only)
Reading range varies by Output Power of Reader/Writer and an antenna.
7-1. EU band
10mm
7-2. US, JAPAN band
10mm
*Measurement setup
8. Packaging
8-1. Dimensions of tape (plastic tape)
J
t
E
D
B
C
K
H
A
G
F
A
B
C
D
E
F
dimensions 1.45±0.1 1.45±0.1 8.0±0.2
3.5±0.05 1.75±0.1 4.0±0.1
G
H
J
K
t
dimensions 2.0±0.05 4.0±0.1
1.5+0.1
0.65±0.05
0.25±0.05
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
3
Rev1.1 Oct, 2017
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
8-2. Dimensions of reel
Unit: mm
2±0.5
Φ180
Φ60
φ13±0.2
9.0
13.0±1.4
8-3. Taping Diagrams
[1] Feeding Hole :
As specified in (1)
As specified in (1)
50um in thickness
As specified in (1)
[2] Hole for chip
[3] Cover tape
[4] Base tape
:
:
:
Feeding Hole
Feeding Direction
Chip
Package chips
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
4
Rev1.1 Oct, 2017
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
8-4 Leader and Tail tape
Cover tape
A
Components
A
B
C
D
1160-1190 mm
400-500 mm
150-200 mm
20-40 mm
8-5 Taping direction
The tape for chips are wound clockwise, the feeding holes to the right side as the tape is pulled
toward the user.
8-6. Quantity per reel
5,000 pcs
8-7. Minimum order quantity
5,000pcs
8-8. Material
Base tape: Plastic
Reel: Plastic
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
5
Rev1.1 Oct, 2017
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
8-9. Peeling force
0.1~1.0 N in the direction of peeling as shown below.
.
0.1~1.0 N
165 ~ 180 °
Cover tape
Base tape
9. Contact window
URL : http://www.murata.com/products/rfid/index.html
" MAGICSTRAP® " is the registered trademark of Murata Manufacturing. Co., Ltd. in Japan.
For any inquiries/queries, please feel free to contact us.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
6
Rev1.1 Oct, 2017
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
NOTICE
1. Storage Conditions:
To avoid damaging, be sure to observe the following points.
- Store products where the ambient temperature is 15 to 35 °C and humidity 45 to 75% RH.
(Packing materials, In particular, may be deformed at the temperature over 40 °C.).
- Store products in non corrosive gas (Cl2, NH3,SO2, Nox, etc.).
- Stored products should be used within 6 months of receipt.
This product is applicable to MSL1 (Based on IPC/JEDEC J-STD-020)
2. Handling Conditions:
Be careful in handling or transporting products because excessive stress or mechanical shock
may break products due to the nature of ceramics structure.
3. Cleaning Conditions:
Any cleaning is not permitted..
4. Operational Environment Conditions:
Products are designed to work for electronic products under normal environmental conditions
(ambient temperature, humidity and pressure). Therefore, products have no problems to be used under the
similar conditions to the above-mentioned. However, if products are used under the following circumstances, it
may damage products and leakage of electricity and abnormal temperature may occur.
- In an atmosphere containing corrosive gas ( Cl2, NH3, SOx, NOx etc.).
- In an atmosphere containing combustible and volatile gases.
- In a dusty environment.
- Direct sunlight
- Water splashing place.
- Humid place where water condenses.
- In a freezing environment.
If there are possibilities for products to be used under the preceding clause, consult with Murata
before actual use.
If product malfunctions may result in serious damage, including that to human life,
sufficient fail-safe measures must be taken, including the following:
(1) Installation of protection circuits or other protective device to improve system safety
(2) Installation of redundant circuits in the case of single-circuit failure
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
7
Rev1.1 Oct, 2017
UHF MAGICSTRAP® Data Sheet
LXMSJZNCMF-198
5. Input Power Capacity:
Products shall be used in the input power capacity as specified in this specification.
Inform Murata beforehand, in case that the components are used beyond such input power
capacity range.
6. Limitation of Applications:
The products are designed and produced for application in ordinary electronic equipment
(AV equipment, OA equipment, telecommunication, etc). If the products are to be used in
devices requiring extremely high reliability following the application listed below, you should
consult with the Murata staff in advance.
- Aircraft equipment.
- Aerospace equipment
- Undersea equipment.
- Power plant control equipment.
- Medical equipment.
- Transportation equipment (vehicles, trains, ships, etc.).
- Traffic signal equipment.
- Disaster prevention / crime prevention equipment.
- Data-procession equipment.
- Application which malfunction or operational error may endanger human life and property of assets.
- Application which related to occurrence the serious damage
- Application of similar complexity and/ or reliability requirements to the applications listed in the above.
!
Note:
Please make sure that your product has been evaluated and confirmed against your specifications when
our product is mounted to your product.
All the items and parameters in this product specification have been prescribed on the premise
that our product is used for the purpose, under the condition and in the environment agreed
upon between you and us. You are requested not to use our product deviating from such
agreement.
We consider it not appropriate to include other terms and conditions for transaction warranty in
product specifications, drawings or other technical documents. Therefore, even if your original
part of this product specification includes such terms and conditions as warranty clause, product liability
clause, or intellectual property infringement liability clause, we are not able to accept such terms and
conditions in this product specification unless they are based on the governmental
regulation or what we have agreed otherwise in a separate contact. We would like to suggest
that you propose to discuss them under negotiation of contract.
All Rights Reserved, Copyright© Murata Manufacturing Co., Ltd.
8
Rev1.1 Oct, 2017
相关型号:
©2020 ICPDF网 联系我们和版权申明