MYGTM0242EBZF [MURATA]
High efficiency and small size have been achieved;
| 型号： | MYGTM0242EBZF |
| 厂家： | 
muRata |
| 描述： | High efficiency and small size have been achieved |
| 文件： | 总14页 (文件大小：658K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
MYGTM0242EBZF DATA Sheet
1
DC-DC Converter DATA Sheet
MYGTM0242EBZF
1.Features
・Single output/SIL/non-isolated type DC-DC converter with high
output voltage(24V/2.5A).
・High efficiency and small size have been achieved.
・High input range（30.0V to 40.0V）.
・Shield case type.
2. Appearance.Dimensions
25.4 Max.
MYGTM
The tolerance not specified is ±0.3
0242EBZF
MURATA
21.7Max.
18.3
22.4
①
(0.5)
(1.5)
6.25
【unit：mm】
11.3±0.5
3.7±0.5
(
)…reference value
Pin Pitch a= 2.5 ±0.3mm
Distance between the both roots of Pin.
Tolerance is not accumulated.
Marking
(1) Manufacturer Parts Number
(2) Manufacturer ID
MYGTM0242EBZF
MURATA
(3) Lot No.
Initial Character(Manufacturer ID)
C：Shenzhen Murata Mfg.Co.,Ltd.
N：Wakura Murata Mfg.Co.,Ltd.
R：Kanazu Murata Mfg.Co.,Ltd.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
2
Pin Number and Function
Pin No.
1,2
Symbol
Vin
Function
Input
3,4,5
6,7
GND
Vout
GND
Output
3. Block Diagram
Vout
Vin
1,2
6,7
4,5
3
GND
Control Circuit
4. Environmental Conditions
4.1. Input Voltage Range
+30.0V~ +40.0V
4.2. Operating Temperature Range
4.3. Storage Temperature Range
4.4. Operating Humidity Range
4.5. Storage Humidity Range
0°C ~ +80°C (Temperature gradient 25°C/H)
-20°C ~ +85°C (Temperature gradient 25°C/H)
10% ~ 85% (No water condenses in any cases.)
5% ~ 90% (No water condenses in any cases.)
5. Absolute Maximum Ratings
Input Voltage
+45V
※No voltage, no matter how instantaneous, shall be applied beyond the absolute maximum voltage rating to
this product. If you apply any voltage over this limit the product characteristics will deteriorate or the product
itself will be destroyed. Even though it may continue operating for a while after the over-voltage event,
it’s life will likely be shortened significantly.Reliability and life of the module may degrade similarly
if the maximum operating voltage rating is continuously exceeded.
This product is designed to operate within the maximum operating voltage rating specification.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
3
6. Characteristics
6.1. Electrical Characteristics (Ta=25 oC)
Value
Typ.
Item
Condition
Unit
Symbol
Min.
30.0
Max.
37.0
24.0
－
40.0
24.72
2.5
V
V
Input Voltage Range
Output Voltage
Vin
Vo
Io
Vin=30.0-40.0V
23.28
0.0
Io=0～2.5A
Load Current
Vin=30.0~40.0V
A
Vin=30.0-40.0V
t=600msmax/4.1s
Slew Rate=100μs
Pulse Load Current
Ip
2.5
－
4.0
A
Vin=37.0V, Io=2.5A,
BW = 20MHz
Ripple Voltage
Efficiency
Vrip
EFF
－
－
80
95
－
－
mV(p-p)
%
Vin =40.0V, Io=2.5A
Protection Circuit
SCP
Automatic return type short circuit protection circuit is built in.
<Caution>
The above electrical characteristics are guaranteed with the condition that the impedance of the input voltage
source is sufficiently low as shown in section 10. Connecting an input inductance or using an input power supply
with output inductance may cause an unstable operation of this device. Please check the proper operation of
this device with the peripheral circuits on your system.
6.2. Output Current Derating
When using this product at Ta≧ 55 oC,it is used by the following output current de-rating.
Output Current Derating
Curve
Output Current[%]
100
90
80
70
60
50
40
30
20
10
0
-10
0
10
20
30
40
50
60
70
80
Ta [
]
℃
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
4
7. Test Circuit
7. 1. Test Circuit
IIN
IOUT
Vr
VIN
V
VOUT
GND
A
1,2
3
A
6,7
4,5
+
+
V
RL
DCIN
C1
C2
C3
GND
MYGTM0242EBZF
： Digital Multi meter
： Ripple Voltmeter
HP34401A equivalent
RM－101 equivalent
EUL－150αXL equivalent
HP6654A equivalent
( Agilent Technologies)
( Keisokugiken )
V
A
Vr
： Electronic Load Device
： DC Power Supply
( Fujitsu access )
RL
( Agilent Technologies)
C1
C2
C3
：Low Impedance Aluminum Electrolytic Capacitor (EY-500E□□332MM40S : NIPPON CHEMI-CON)
：Low Impedance Aluminum Electrolytic Capacitor（EKZE350ETD681MK20S：NIPPON CHEMI-CON)
：Ceramic Capacitor 0.1μF
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
5
8. Pattern Layout
8. 1. Foot Print Dimensions
φ2.0
Hole D
6.25
2-φ1.1
6-2.5
R0.85
R0.85
5-φ0.9
Hole C
Hole A
Hole B
R0.85
1.7
1.7
3.95
R0.85
18.95
φ2.0
Top View
Unit【mm】
8. 2. Patterning Area
Metal case is connected to GND. So hole A,B,C and D should be connected to GND.
The Area indicated is allowed no pattern or only GND pattern.
Hole A and C
Hole B and D
7.0
2.0
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
6
9. Mounting Condition
9.1. Soldering
9.1.1. Flux
Please solder the products with no-cleaning type Rosin Flux which leaves little residue and lowactivity.
Do not use cleaning type flax, in case that you wash the products after using cleaningtype flux,
they may damage mounting parts on the products and may cause defective or lowquality products.
9.1.2. Solder
Please recommend use of the solder Sn-3Ag-0.5Cu.
When use other solders, use it after examining at customer.
9.1.3. Condition of soldering
Please solder under the following condition.
･ Flow soldering Preheating
Soldering
: 120±10 oC 60～120 seconds
: 255±5 oC
Time within
･ Condition of iron soldering
: 10 seconds
: under 380 oC, 4 seconds at maximum
(Only iron less than 30W should be used.)
9. 2. Cleaning
Please do not wash the products.
10. Packaging Specification
10.1. Packing form
These are packed in a tray(See Fig.1)
10.2. The number of products in pack specification form.
66pcs./tray
If the products have fraction, may not follow this specification.
10.3. Packaging Form
10.3.1. Case of reuseable box is used.
These trayies packed products are packaging for Fig. 2.
10.3.2. Case of reuseable box is not used
These trayies packed products are packaging for Fig. 3.
The product is arranged in the tray as follows.
lengthwise:6pcs×crosswise:11pcs
Product
storage direction
Top View
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact th
2016.7.12
MYGTM0242EBZF DATA Sheet
7
B-B'cross section
28.7
34.0
275.0
25.8
23.3
43.0
30.0
3.5
Product
storage
direction
Fig.1
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
8
As in Fig.2, 10 traies are packed up in the outside packing box .(Number of packed traies is 9 and Empty traies is 1)
When there is a fraction, packing up the empty tray. (Number of all traies is allways 10.)
Then, traies piles up alternately.
Air cap
Empty tray
Product packed tray
Buffer material
Buffer material
Outside packing box
Buffer material
Outside packing box
Tray
Fig.2
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
9
As in Fig.3, 10 traies fixed by banding band are packed up in the corrugated fiberboard box.
(Number of packed traies is 9 and Empty traies is 1.)
When there is a fraction, fixed the empty trais by banding band. (Number of all traies is allways 10.)
Then, traies piles up alternately.
Banding band
Tyay
Top view
Empty tyay
Product packed tray
Side view
Corrugated fiberboard mount
Fixed Tray
Corrugated fiberboard box
Fig.3
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
10
Item
Specification
Box
Packaging form typical classification
Dimensions of packaging form (typ.)
Case of reuseable box is
used.
W
D
=
=
=
538 ( mm )
368 ( mm )
284 ( mm )
H
H
Case of reuseable box is not
used
W
D
W
D
=
=
=
432 ( mm )
296 ( mm )
264 ( mm )
H
The number of products in packaging form
Mass of one product
594 ( pcs )
17 ( ｇ ) Typ
Remark
・If the products have fraction, may not follow this specification.
※On the Packing case, the following is indicated.
Murata Parts No.
Quantity
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
11
11. Typical Characteristics Data
11. 1. Static Electrical Characteristics
Vin=30V,37V,40V, Vout=24V
(Ta=25 oC, Cin= EKY-500E□□332MM40S, Cout= EKZE350ETD681MK20S)
Fig.11-1-1. Output Voltage v.s. Output Current
Fig.11-1-2. Efficiency v.s. Output Current
Fig.11-1-3. Ripple Voltage v.s. Output Current
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
12
11. 2. Dynamic Electrical Characteristics
Vin=37V, Vout=24V
(Ta=25 oC, Cin= EKY-500E□□332MM40S, Cout= EKZE350ETD681MK20S)
Vin(50V/div)
Vin(50V/div)
Vout(10V/div)
Vout(10V/div)
20ms/div
20ms/div
Fig.11-2-1. Start-up Waveform(Io=0A)
Fig.11-2-2. Start-up Waveform(Io=2.5A)
100us/div
100us/div
Vout(200mV/div)
Vout(200mV/div)
Iout(5A/div)
Iout(5A/div)
Fig.11-2-3. Load Transient Response
Fig.11-2-4. Load Transient Response
(Io=0 → 4A)
(Io=4A → 0A)
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
13
12. Notice
12.1. Input / Output capacitor
When a inductance or a switch devise are connected to the input line, or when you use a power supply with
output inductance as the input voltage source, the input voltage of the DC-DC converter will be fluctuated.
By this input voltage fluctuation, the transient load response of the DC-DC converter may be deteriorated or
abnormal oscillation may occur. So please confirm normal operation on each application.
Please use external input capacitor in order to decrease inductance of input line.
12.2. Wiring of input / output capacitor
In the case of input / output capacitor connection, in order to reduce electrical noise, please design PCBs
with consideration of the following item.
①.Please be sure to check normal operation on your system.
②.Please use low impedance capacitors with good high frequency characteristic.
③.Please shorten those leads of each capacitor as much as possible, and make sure the lead
Inductance low.
④.Both input-side and output side, please make the wiring loop between plus and minus as small as
possible.The influence of leakage inductance can be reduced.
⑤.Please design the print pattern of the main circuit as wide and short as possible.
Make wiring roop small
Make wiring roop small
+Vin
+Vout
out
+V
+Vin
-Vin
DC-DC
Converter
+Vin
Load
GND
C1
C2
shorten the leads and pattern
shorten the leads and pattern
12.3. This product should not be operated in parallel or in series.
12.4. Please do not use a connector or a socket to connect this product to your product.
The electric characteristics may be deteriorated by the influence of contact resistance.
12.5. Be sure to provide an appropriate fail-safe function on your product to prevent secondary damage
that may be caused due to abnormal functional or failure of this product.
12.6. Inrush current protection is not a feature of this product.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
MYGTM0242EBZF DATA Sheet
14
12.7. Please connect the input terminals with the correct polarity. If you connect this by mistake, it may break
the DC-DC converter. In the case of destruction of the DC-DC converter inside, over input current may flow,
and so DC-DC converter maybe occurred abnormal temperature rise, or your product may be damaged.
Please add a diode and fuse per the following diagram to protect them.
fuse
+
+
+
Load
OUT
diode
IN
-
-
Standard of fuse : current rating 10A
※Please select diode and fuse after confirming the operation of your product.
!
Note
1. Please make sure that your product has been evaluated and confirmed against your specifications
when our product is mounted to your product.
2. Please contact our main sales office or nearby sales office before using our products for the applications
listed below which require especially high reliability for the prevention of defects which might directly
cause damage to the third party’s life, body or property or this products for any other applications that
described in the above.
①Aircraft equipment
②Aerospace equipment
③Undersea equipment
④Power plant control equipment
⑤Medical equipment
⑥Transportation equipment (vehicles, trains, ships, etc.)
⑦Traffic signal equipment
⑧Disaster prevention /crime prevention equipment
⑨Data-processing equipment
⑩Application of similar complexity and/or reliability requirements to the applications listed in the above.
3. If you have any concerned materials other than RoHS directive, please contact us.
4. About the written contents, since changing without a preliminary
announcement for improvement and supply are sometimes stopped, please confirm in case of ordering.
If written contents are unknown, please ask to our main sales office or nearby sales office.
Note:
1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’ s specifications are subject to change or our
products in it may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.
2. This datasheet has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product
specifications or transact the approval sheet for product specifications before ordering.
2016.7.12
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明