NTPAA8R2LDNB0_技术文档

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

R44E.pdf

10.2.22

NTC Thermistors

Cat.No.R44E-12

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for EU RoHS Compliant

•

All the products in this catalog comply with EU RoHS.

•

EU RoHS is "the European Directive 2002/95/EC on the Restriction of the Use

of Certain Hazardous Substances in Electrical and Electronic Equipment".

•

For more details, please refer to our website 'Murata's Approach for EU RoHS'

(http://www.murata.com/info/rohs.html).

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

1

CONTENTS

Part Numbering

Basic Characteristics

2

6

2

3

4

5

6

7

8

1

2

3

4

for Temperature Sensor and Compensation 0201 (0603) Size

for Temperature Sensor and Compensation 0402 (1005) Size

for Temperature Sensor and Compensation 0603 (1608) Size

for Temperature Sensor and Compensation 0805 (2012) Size

7

8

10

12

13

14

18

22

25

26

28

29

31

32

34

35

37

41

43

for Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions

for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

for Temp. Sensor and Compensation Chip Type !Caution/Notice

for Temp. Sensor and Compensation Chip Type Package

5

for Temperature Sensor Thermo String Type

for Temperature Sensor Thermo String Type Specifications and Test Methods

for Temperature Sensor Lead Type

6

7

for Temperature Sensor Lead Insulation Type

for Temperature Sensor Temperature Characteristics (Center Value)

for Temperature Sensor Thermo String Type/Lead Type !Caution/Notice

for Temperature Sensor Thermo String Type/Lead Type Package

8

for Inrush Current Suppression Lead Type

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

for Inrush Current Suppression Lead Type !Caution/Notice

for Inrush Current Suppression Lead Type Package

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

o Part Numbering

NTC Thermistors for Temp. Sensor and Compensation Chip Type

(Part Number)

J

03 RB

NC

P

18 XH 103

q

w

e

r

t

y

u

i

qProduct ID

tResistance

Expressed by three-digit alphanumerics. The unit is ohm (Ω).

The first and second figures are significant digits, and the third

figure expresses the number of zeros which follow the two

figures. If there is a decimal point, it is expressed by the capital

letter "R". In this case, all figures are significant digits.

Product ID

NC

NTC Thermistors Chip Type

wSeries

Ex.

Code

Series

Code

102

Resistance

1kΩ

P

Plated Termination Series

103

10kΩ

eDimensions (LgW)

104

100kΩ

Code

03

Dimensions (LgW)

0.60g0.30mm

1.00g0.50mm

1.60g0.80mm

2.00g1.25mm

EIA

yResistance Tolerance

0201

0402

0603

0805

15

Code

Resistance Tolerance

18

D

E

F

J

±0.5%

±3%

21

±1%

rTemperature Characteristics

±5%

Code

WB

WD

WF

WL

WM

XC

Temperature Characteristics

uIndividual Specifications

Nominal B-Constant 4050e4099K

Nominal B-Constant 4150e4199K

Nominal B-Constant 4250e4299K

Nominal B-Constant 4450e4499K

Nominal B-Constant 4500e4549K

Nominal B-Constant 3100e3149K

Nominal B-Constant 3250e3299K

Nominal B-Constant 3350e3399K

Nominal B-Constant 3500e3549K

Nominal B-Constant 3650e3699K

Nominal B-Constant 3900e3949K

Nominal B-Constant 3950e3999K

Structures and others are expressed by two figures.

Individual Specifications

Code

Standard Type

03

Please contact us for details.

iPackaging

XF

XH

Code

Packaging

XM

XQ

XV

RA

RB

RC

RL

Plastic Taping 4mm Pitch

Paper Taping 4mm Pitch

Paper Taping 2mm Pitch (10000 pcs.)

Paper Taping 2mm Pitch (15000 pcs.)

XW

2

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistor for Temperature Sensor Thermo String Type

(Part Number)

F

A

2

B

025

NXF

T

15 XH 103

q

w

e

r

t

y

u

i

o

!

qProduct ID

uLead Wire Type

Product ID

Code

Lead Wire Type

NXF

NTC Thermistors Sensor Thermo String Type

A

ø0.3 Copper Lead Wire with Polyurethane Coat

wIndividual Specifications

iShape of the Lead Wire Kink

Code

Individual Specifications

Shape of the Lead Wire Kink

Code

T

Commercial Type

The Twist of Lead Wire Type

Standard Type

1

2

eChip Dimensions

oPackaging

Code

Dimensions (LxT)

EIA

15

1.00 x 0.50mm

0402

Code

Packaging

B

Bulk

rTemperature Characteristics

!Dimensions (Full Length)

Code

WB

WF

Temperature Characteristics

Nominal B-Constant 4050–4099K

Nominal B-Constant 4250–4299K

Nominal B-Constant 3350–3399K

Code

025

030

040

050

060

070

080

090

100

110

120

130

140

150

Dimensions (Full Length)

25mm

XH

30mm

40mm

tResistance

50mm

Expressed by three figures. The unit is (Ω). The first and second

figures are significant digits, and the third figure expresses the

number of zeros which follow the two figures.

60mm

70mm

80mm

Ex.

Code

103

Resistance

10kΩ

90mm

100mm

110mm

120mm

130mm

140mm

150mm

473

47kΩ

104

100kΩ

yResistance Tolerance

Code

Resistance Tolerance

F

±1%

3

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors for Temperature Sensor Lead Type

(Part Number)

E1 B0

NT SA0 XH 103

F

q

w

e

r

t

y

u

qProduct ID

tResistance Tolerance

Product ID

Code

Resistance Tolerance

NT

NTC Thermistors

E

F

±3%

±1%

wSeries

yIndividual Specifications

Code

Series

A lead structure and other specifications are expressed by two digits.

SA0

for Temperature Sensors No Lead-coating Type

Individual Specifications

Standard Bulk (NTSA, NTSD0 Series)

Standard Ammo Pack Taping (NTSA Series)

Standard Bulk (NTSD1 Series)

Code

E1

for Temperature Sensors Lead-coating Type

(Total Length 30mm max.)

SD0

SD1

N6

for Temperature Sensors Lead-coating Type

(Total Length 30 to 50mm)

PB

eTemperature Characteristics

uPackaging (NTSA/NTSD0 Series)

Code

WB

WC

WD

WF

XH

Temperature Characteristics

Code

Packaging

Nominal B-Constant 4050e4099K

Nominal B-Constant 4100e4149K

Nominal B-Constant 4150e4199K

Nominal B-Constant 4250e4299K

Nominal B-Constant 3350e3399K

Nominal B-Constant 3500e3549K

Nominal B-Constant 3700e3749K

Nominal B-Constant 3900e3949K

A0

B0

Ammo Pack Taping

Bulk

uTotal Length (NTSD1 Series)

Code

30

Total Length

30mm

XM

XR

40

40mm

XV

50

50mm

rResistance

Expressed by three-digit alphanumerics. The unit is ohm (Ω).

The first and second figures are significant digits, and the third

figure expresses the number of zeros which follow the two

figures. If there is a decimal point, it is expressed by the capital

letter "R". In this case, all figures are significant digits.

Ex.

Code

202

Resistance

2kΩ

203

20kΩ

4

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors for Inrush Current Suppression Lead Type

(Part Number)

NT PA7 160

L

BM B0

q

w

e

r

t

y

qProduct ID

rResistance Tolerance

Product ID

Code

Resistance Tolerance

NT

NTC Thermistors

L

±15%

wSeries

tIndividual Specifications

A lead structure and other specifications are expressed by two

capital letters.

Code

PA7

PA9

PAA

PAD

PAJ

PAN

Series

Nominal Body Diameter

ø7mm

ø9mm

Individual Specifications

Standard Type (Ammo Pack) ø7mm, ø9mm

Standard Type (Bulk) ø7mm, ø9mm

Standard Type (Ammo Pack) ø10mm, ø13mm

Body Diameter

Code

B1

Inrush Current

Suppression

Lead Type

ø10mm

ø13mm

BM

D6

ø18mm

ø22mm

Standard (Bulk)

ø18mm, ø22mm

ø10mm, ø13mm

DK

DN

eResistance

Expressed by three-digit alphanumerics. The unit is ohm (Ω).

The first and second figures are significant digits, and the third

figure expresses the number of zeros which follow the two

figures. If there is a decimal point, it is expressed by the capital

letter "R". In this case, all figures are significant digits.

yPackaging

Code

A0

Packaging

Ammo Pack Taping

Bulk

B0

Ex.

Code

3R0

100

Resistance

3Ω

10Ω

5

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

10.2.22

sales representatives or product engineers before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Basic Characteristics

!Basic Characteristics

1. Zero-power Resistance of Thermistor: R

R=R⁰expB (1/T-1/T0) ..............(1)

Resistance vs. Temperature

R: Resistance in ambient temperature T (K)

10²

(K: absolute temperature)

R⁰: Resistance in ambient temperature T0 (K)

B: B-Constant of Thermistor

10¹

2. B-Constant

as (1) formula

1

B=Rn (R/R⁰) / (1/T-1/T0) ............(2)

3. Thermal Dissipation Constant

10⁻¹

When electric power P (mW) is spent in ambient

B=3450

B=3900

B=4100

temperature T¹and thermistor temperature rises T2,

there is a formula as follows

P=C (T²-T1) ..................(3)

C: Thermal dissipation constant (mW/°C)

Thermal dissipation constant is varied with dimensions,

measurement conditions, etc.

10⁻²

−20

0

20 40 60 80 100 120

Temperature (˚C)

4. Thermal Time Constant

Period in which Thermistor's temperature will change

63.2% of its temperature difference from ambient

temperature T⁰(°C) to T1 (°C).

Thermal Time Constant

T1

X

63.2%

T0

Time

!Performance

Item

Condition

Resistance

B-Constant

Measured by zero-power in specified ambient temperature.

Calculated between two specified ambient temperatures by next formula.

T and T⁰is absolute temperature (K).

Rn (R/R⁰)

B =

1/TY1/T⁰

Shows necessary electric power that Thermistor's temperature rises 1˚C by self heating.

It is calculated by next formula. (mW/˚C)

Thermal Dissipation

Constant

P

C =

TYT⁰

Shows necessary electric power that Thermistor's temperature rises to a specified temperature by self heating in ambient

temperature 25˚C.

Rated Electric Power

Permissive Operating Current

It is possible to keep Thermistor's temperature rising max. 1˚C.

Please inquire about test conditions and ratings.

6

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

1

NTC Thermistors

for Temperature Sensor and Compensation 0201 (0603) Size

0201/0402/0603/0805 sized Chip NTC Thermistors have Ni

barrier termination and provide excellent solderability

and offer high stability in environment by unique inner

construction.

0.15±0.05

0.60±0.03

■ Features

1. Excellent solderability and high stability in

environment

2. Excellent long time aging stability

Electrode

(Ag System + Ni Plating + Sn Plating)

3. High accuracy in resistance and B-Constant

(in mm)

4. Reflow soldering possible

5. NCP series are recognized by UL/cUL.

(UL1434, File No.E137188)

■ Applications

1. Temperature compensation for transistor, IC and

crystal oscillator in mobile communications

2. Temperature sensor for rechargeable batteries

3. Temperature compensation of LCD

4. Temperature compensation in general use of electric circuits

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NCP03YS110J05RL

NCP03YS220J05RL

NCP03YS330J05RL

NCP03YS470J05RL

NCP03YS680J05RL

NCP03YS101J05RL

NCP03XM102p05RL

NCP03XM152p05RL

NCP03XM222p05RL

NCP03XM332p05RL

NCP03XM472p05RL

NCP03XH682p05RL

NCP03XH103F05RL

NCP03XH103p05RL

NCP03XV103p05RL

NCP03XH153p05RL

NCP03XH223p05RL

NCP03WF333p05RL

NCP03WB473p05RL

NCP03WL473p05RL

NCP03WF683p05RL

NCP03WL683p05RL

NCP03WF104F05RL

NCP03WF104p05RL

NCP03WL104p05RL

NCP03WL154p05RL

NCP03WL224p05RL

11 ±5%

22 ±5%

33 ±5%

47 ±5%

68 ±5%

100 ±5%

1.0k

2750 ±3%

3500 ±1%

3380 ±1%

3900 ±1%

3380 ±1%

4250 ±1%

4050 ±3%

4485 ±1%

4250 ±1%

4485 ±1%

4250 ±1%

4485 ±1%

2758

3539

3428

3930

3428

4303

4101

4537

4303

4537

4303

4537

2758

3545

3434

3934

3434

4311

4108

4543

4311

4543

4311

4543

2758

3560

3455

3944

3455

4334

4131

4557

4334

4557

4334

4557

9.50

6.70

5.50

4.60

3.80

3.10

1.00

0.81

0.67

0.55

0.46

0.38

0.31

0.25

0.21

0.17

0.14

0.12

0.10

0.08

0.06

100

1

1.5k

2.2k

3.3k

4.7k

6.8k

10k ±1%

10k

15k

22k

33k

47k

68k

100k ±1%

100k

150k

220k

A blank column is filled with resistance tolerance codes (E: ±3%, J: ±5%).

Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

7

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors

for Temperature Sensor and Compensation 0402 (1005) Size

0201/0402/0603/0805 sized Chip NTC Thermistor have Ni

barrier termination and provide excellent solderability

and offer high stability in environment by unique inner

construction.

2

0.25±0.10

1.0±0.05

■ Features

1. Excellent solderability and high stability in

environment

2. Excellent long time aging stability

3. High accuracy in resistance and B-Constant

4. Reflow soldering possible

Electrode

(Ag System + Ni Plating + Sn Plating)

(in mm)

5. Same B-constant in the same resistance in the three

sizes (0805 size / 0603 size / 0402 size)

Easy to use smaller size in the circuits

6. NCP series are recognized by UL/cUL.

(UL1434, File No.E137188)

■ Applications

1. Temperature compensation for transistor, IC and

crystal oscillator in mobile communications

2. Temperature sensor for rechargeable batteries

3. Temperature compensation of LCD

4. Temperature compensation in general use of electric

circuits

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NCP15XC220p03RC

NCP15XC330p03RC

NCP15XC470p03RC

NCP15XC680p03RC

NCP15XF101p03RC

NCP15XF151p03RC

NCP15XM221p03RC

NCP15XM331p03RC

NCP15XQ471p03RC

NCP15XQ681p03RC

NCP15XQ102p03RC

NCP15XW152p03RC

NCP15XW222p03RC

NCP15XW332p03RC

NCP15XM472p03RC

NCP15XW682p03RC

NCP15XH103D03RC

NCP15XH103F03RC

NCP15XH103p03RC

NCP15XV103p03RC

NCP15XW153p03RC

NCP15XW223p03RC

NCP15WL223p03RC

NCP15WB333p03RC

NCP15WL333p03RC

22

3100 ±3%

3250 ±3%

3500 ±3%

3650 ±2%

3650 ±3%

3650 ±2%

3950 ±3%

3500 ±2%

3950 ±3%

3126

3282

3539

3688

3982

3539

3982

3428

3930

3982

4537

4101

4537

3128

3284

3545

3693

3987

3545

3987

3434

3934

3987

4543

4108

4543

3136

3296

3560

3706

3998

3560

3998

3455

3944

3998

4557

4131

4557

6.70

5.50

4.60

3.80

3.10

2.50

2.10

1.70

1.40

1.20

1.00

0.81

0.67

0.55

0.46

0.38

0.31

0.25

0.21

0.17

100

1

33

47

68

100

150

220

330

470

680

1.0k

1.5k

2.2k

3.3k

4.7k

6.8k

10k ±0.5% 3380 ±0.7%

10k ±1%

10k

3380 ±1%

3900 ±3%

3950 ±3%

4485 ±1%

4050 ±3%

4485 ±1%

10k

15k

22k

33k

Continued on the following page.

8

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NCP15WB473D03RC 47k ±0.5% 4050 ±0.5%

4101

4537

4201

4537

4303

4537

4571

4108

4543

4209

4543

4311

4543

4582

4131

4557

4232

4557

4334

4557

4614

0.14

0.12

0.10

0.08

0.06

0.04

100

1

NCP15WB473F03RC

NCP15WB473p03RC

NCP15WL473p03RC

NCP15WD683p03RC

NCP15WL683p03RC

47k ±1%

47k

4050 ±1%

4485 ±1%

4150 ±3%

4485 ±1%

47k

68k

2

NCP15WF104D03RC 100k ±0.5% 4250 ±0.5%

NCP15WF104F03RC

NCP15WF104p03RC

NCP15WL104p03RC

NCP15WL154p03RC

NCP15WM154p03RC

NCP15WM224p03RC

NCP15WM474p03RC

100k ±1%

100k

4250 ±1%

4485 ±1%

4500 ±3%

100k

150k

220k

470k

A blank column is filled with resistance tolerance codes (E: ±3%, J: ±5%).

Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

9

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors

for Temperature Sensor and Compensation 0603 (1608) Size

0201/0402/0603/0805 sized Chip NTC Thermistors have Ni

barrier termination and provide excellent solderability

and offer high stability in environment by unique inner

construction.

0.2-0.6

1.6±0.15

■ Features

1. Excellent solderability and high stability in

3

environment

2. Excellent long time aging stability

3. High accuracy in resistance and B-constant

4. Flow / Reflow soldering possible

5. Same B-Constant in the same resistance in the three

sizes (0805 size / 0603 size / 0402 size)

Easy to use smaller size in the circuits

6. NCP series are recognized by UL/cUL.

(UL1434, File No.E137188)

Electrode

(Ag System + Ni Plating + Sn Plating)

(in mm)

■ Applications

1. Temperature compensation for transistor, IC and

crystal oscillator in mobile communications

2. Temperature sensor for rechargeable batteries

3. Temperature compensation of LCD

4. Temperature compensation in general use of electric

circuits

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NCP18XF101p03RB

NCP18XF151p03RB

NCP18XM221p03RB

NCP18XM331p03RB

NCP18XQ471p03RB

NCP18XQ681p03RB

NCP18XQ102p03RB

NCP18XW152p03RB

NCP18XW222p03RB

NCP18XW332p03RB

NCP18XM472p03RB

NCP18XW682p03RB

NCP18XH103D03RB

NCP18XH103F03RB

NCP18XH103p03RB

NCP18XV103p03RB

NCP18XW153p03RB

NCP18XW223p03RB

NCP18WB333p03RB

100

150

220

330

470

680

1.0k

1.5k

2.2k

3.3k

4.7k

6.8k

3250 ±3%

3500 ±3%

3650 ±2%

3650 ±3%

3650 ±2%

3950 ±3%

3500 ±2%

3950 ±3%

3282

3539

3688

3982

3539

3982

3428

3930

3982

4101

4201

4255

3284

3545

3693

3987

3545

3987

3434

3934

3987

4108

4209

4260

3296

3560

3706

3998

3560

3998

3455

3944

3998

4131

4232

4282

3.10

2.50

2.10

1.70

1.40

1.20

1.00

0.81

0.67

0.55

0.46

0.38

0.31

0.25

0.21

0.17

0.14

0.12

0.10

100

1

10k ±0.5% 3380 ±0.7%

10k ±1%

10k

3380 ±1%

3900 ±3%

3950 ±3%

4050 ±3%

10k

15k

22k

33k

NCP18WB473D03RB 47k ±0.5% 4030 ±0.5%

NCP18WB473F10RB

NCP18WB473p03RB

NCP18WD683p03RB

47k ±1%

47k

4050 ±1.5%

4050 ±2%

4150 ±3%

68k

NCP18WF104D03RB 100k ±0.5% 4200 ±0.5%

NCP18WF104F12RB 100k ±1% 4200 ±1%

Continued on the following page.

10

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NCP18WF104p03RB

NCP18WM154p03RB

NCP18WM224p03RB

NCP18WM474p03RB

100k

150k

220k

470k

4250 ±2%

4500 ±3%

4255

4571

4260

4582

4282

4614

0.10

0.08

0.06

0.04

100

1

A blank column is filled with resistance tolerance codes (E: ±3%, J: ±5%).

Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

3

11

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors

for Temperature Sensor and Compensation 0805 (2012) Size

0201/0402/0603/0805 sized Chip NTC Thermistors have Ni

barrier termination and provide excellent solderability

and offer high stability in environment by unique inner

0.2-0.7

construction.

2.0±0.2

■ Features

1. Excellent solderability and high stability in

environment

2. Excellent long time aging stability

3. High accuracy in resistance and B-constant

4. Flow / Reflow soldering possible

5. Same B-Constant in the same resistance in the three

sizes (0805 size / 0603 size / 0402 size)

Easy to use smaller size in the circuits

6. NCP series are recognized by UL/cUL.

(UL1434, File No.E137188)

Electrode

(Ag System + Ni Plating + Sn Plating)

(in mm)

4

■ Applications

1. Temperature compensation for transistor, IC and

crystal oscillator in mobile communications

2. Temperature sensor for rechargeable batteries

3. Temperature compensation of LCD

4. Temperature compensation in general use of electric

circuits

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NCP21XM221J03RA

NCP21XQ471J03RA

NCP21XQ102J03RA

NCP21XW222J03RA

NCP21XM472J03RA

NCP21XV103J03RA

NCP21XW153J03RA

NCP21XW223J03RA

NCP21WB333J03RA

NCP21WB473J03RA

NCP21WF104J03RA

220 ±5%

470 ±5%

1.0k ±5%

2.2k ±5%

4.7k ±5%

10k ±5%

15k ±5%

22k ±5%

33k ±5%

47k ±5%

100k ±5%

3500 ±3%

3650 ±3%

3950 ±3%

3500 ±3%

3900 ±3%

3950 ±3%

4050 ±3%

4250 ±3%

3539

3688

3982

3539

3930

3982

4101

4303

3545

3693

3987

3545

3934

3987

4108

4311

3560

3706

3998

3560

3944

3998

4131

4334

3.00

2.00

1.40

0.90

0.65

0.44

0.36

0.30

0.24

0.20

0.14

200

2

Rated Electric Power is necessary electric power that Thermistor's temperature rises 100°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

12

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Standard Land Pattern Dimensions

Solder Resist

Land

Chip

b

a

Dimensions (mm)

Soldering

Methods

Part Number

Chip (LxW)

a

b

c

NCP03

NCP15

Reflow Soldering 0.6x0.3

Reflow Soldering 1.0x0.5

0.25

0.3

0.4 0.4-0.5 0.5

0.6-1.0 0.8-0.9 0.6-0.8

0.6-0.8 0.6-0.7 0.6-0.8

1.0-1.1 0.9-1.0 1.0-1.2

1.0-1.1 0.6-0.7 1.0-1.2

Flow Soldering

Reflow Soldering

NCP18

NCP21

1.6x0.8

Flow Soldering

Reflow Soldering

2.0x1.25

4

13

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Part Number NCPppYS110 NCPppYS220 NCPppXC220 NCPppYS330 NCPppXC330

NCPppYS470 NCPppXC470 NCPppYS680

Resistance

B-Constant

11Ω

2750K

22Ω

2750K

22Ω

3100K

33Ω

2750K

33Ω

3100K

47Ω

2750K

47Ω

3100K

68Ω

2750K

Temp. (°C) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)

Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

95

100

105

110

115

120

125

127.366

101.662

81.726

66.148

53.946

44.273

36.494

30.262

25.226

21.150

17.828

15.103

12.859

11.000

9.452

8.162

7.077

6.161

5.389

4.731

4.168

3.687

3.273

254.732

203.325

163.452

132.296

107.893

88.546

72.987

60.523

50.451

42.300

35.657

30.205

25.719

22.000

18.904

16.323

14.155

12.323

10.778

9.461

8.336

7.374

6.545

5.830

5.210

4.671

4.201

3.789

3.427

3.107

2.825

2.574

2.352

2.153

355.823

273.975

213.003

166.943

131.997

105.318

84.670

68.628

55.981

45.859

37.819

31.396

26.211

22.000

18.560

15.735

13.403

11.462

9.842

8.488

7.348

6.399

5.595

4.896

4.299

3.795

3.360

382.098

304.987

245.178

198.444

161.839

132.819

109.481

90.785

75.677

63.449

53.485

45.308

38.578

33.000

28.356

24.485

21.232

18.484

16.167

14.192

12.504

11.061

9.817

533.734

410.962

319.504

250.415

197.996

157.978

127.005

102.942

83.972

68.789

56.728

47.094

39.317

33.000

27.840

23.603

20.104

17.193

14.763

12.732

11.022

9.598

8.392

7.345

6.448

5.692

5.040

4.474

3.983

3.551

3.173

2.851

2.568

2.314

544.201

434.376

349.193

282.633

230.498

189.167

155.927

129.299

107.782

90.367

76.176

64.529

54.944

47.000

40.386

34.872

30.239

26.326

23.025

20.213

17.809

15.753

13.982

12.454

11.130

9.979

760.166

585.310

455.051

356.652

281.994

224.998

180.886

146.614

119.596

97.972

80.794

67.073

55.997

47.000

39.651

33.616

28.633

24.487

21.026

18.133

15.698

13.670

11.952

10.461

9.184

787.354

628.459

505.215

408.915

333.487

273.688

225.597

187.071

155.940

130.744

110.212

93.361

79.494

68.000

58.430

50.454

43.750

38.089

33.313

29.244

25.766

22.792

20.230

18.019

16.102

14.437

12.984

11.710

10.591

9.604

4

2.915

2.605

2.335

2.100

1.894

1.713

1.554

1.412

8.744

7.814

7.006

6.301

5.683

5.140

4.661

4.237

8.107

7.179

6.373

5.673

5.057

4.520

4.060

3.657

8.974

8.094

7.320

6.638

6.035

5.500

5.024

4.600

2.983

2.656

2.367

2.116

1.901

1.712

1.543

8.731

7.957

7.269

6.655

1.287

1.176

1.077

3.862

3.528

3.230

3.296

Part Number NCPppXC680 NCPppYS101 NCPppXF101 NCPppXF151 NCPppXM221 NCPppXM331

NCPppXQ471 NCPppXQ681

Resistance

B-Constant

68Ω

3100K

100Ω

2750K

100Ω

3250K

150Ω

3250K

220Ω

3500K

330Ω

3500K

470Ω

3650K

680Ω

3650K

Temp. (°C) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω) Resistance (Ω)

Resistance (Ω) Resistance (Ω)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

95

100

105

110

115

120

125

1099.815

846.832

658.372

516.007

407.991

325.529

261.707

212.123

173.033

141.747

116.894

97.042

81.016

68.000

57.368

48.636

41.426

35.428

30.421

26.235

22.712

19.778

17.293

15.134

13.288

11.729

10.386

9.220

1157.874

924.204

742.963

601.346

490.422

402.482

331.760

275.105

229.324

192.270

162.076

137.296

116.902

100.000

85.927

74.197

64.339

56.013

48.989

43.006

37.891

33.517

29.750

26.498

23.680

21.231

19.094

17.221

15.575

14.124

12.840

11.702

10.690

9.787

1824.175

1390.685

1070.653

831.138

650.960

514.441

409.700

328.877

265.759

215.785

176.395

145.161

120.152

100.000

83.669

70.361

59.456

50.470

43.029

36.830

31.649

27.364

23.756

20.651

18.011

15.800

13.908

12.263

10.844

9.622

2736.262

2086.028

1605.979

1246.708

976.440

771.661

614.550

493.315

398.639

323.677

264.592

217.742

180.228

150.000

125.503

105.541

89.184

75.705

64.543

55.246

47.473

41.045

35.634

30.976

27.016

4947.904

3703.755

2798.873

2135.887

1645.037

1278.034

1000.620

789.612

627.752

502.474

405.010

328.480

268.044

220.000

181.576

150.668

125.681

105.336

88.717

75.059

63.777

54.415

46.631

40.115

34.637

30.013

26.110

7421.856

5555.632

4198.309

3203.831

2467.555

1917.051

1500.930

1184.418

941.628

753.711

607.514

492.720

402.066

330.000

272.365

226.002

188.521

158.004

133.076

112.588

95.666

81.622

69.946

60.172

51.955

45.019

39.165

34.186

29.935

26.312

23.180

20.494

18.171

11822.473

8767.745

6570.224

4971.784

3796.933

2923.400

2269.599

1775.225

1399.050

1110.220

887.257

713.463

577.375

470.000

384.800

316.757

262.177

218.069

182.297

153.150

129.249

109.551

93.281

17104.854

12685.248

9505.855

7193.219

5493.436

4229.599

3283.675

2568.411

2024.158

1606.275

1283.691

1032.245

835.351

680.000

556.733

458.287

379.320

315.504

263.749

221.579

186.998

158.499

134.960

115.383

99.029

79.750

68.446

58.996

51.036

44.332

38.640

33.790

29.664

23.700

20.862

18.394

16.265

14.434

12.844

11.472

10.275

85.356

73.839

64.140

55.905

48.888

42.918

37.795

33.409

22.790

19.957

17.541

15.453

13.663

12.114

10.778

8.208

7.317

6.539

5.874

5.291

4.768

8.563

7.648

6.850

6.162

26.123

23.091

20.472

9.243

16.168

29.618

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

Continued on the following page.

1

14

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Continued from the preceding page.

Part Number NCPppXM102 NCPppXQ102 NCPppXM152 NCPppXW152 NCPppXM222 NCPppXW222 NCPppXM332 NCPppXW332

Resistance

B-Constant

1kΩ

3500K

1kΩ

3650K

1.5kΩ

3500K

1.5kΩ

3950K

2.2kΩ

3500K

2.2kΩ

3950K

3.3kΩ

3500K

3.3kΩ

3950K

Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

95

100

105

110

115

120

125

21.266

16.150

12.347

9.503

7.365

5.747

4.516

3.572

2.844

2.280

1.839

1.492

1.218

1.000

0.825

0.685

0.571

0.479

0.403

0.341

0.290

0.247

0.212

0.182

0.157

0.136

0.119

0.104

0.091

0.080

0.070

0.062

0.055

0.049

25.154

18.655

13.979

10.578

8.079

6.220

4.829

3.777

2.977

2.362

1.888

1.518

1.229

1.000

0.819

0.674

0.558

0.464

0.388

0.326

0.275

0.233

0.199

0.170

0.146

0.126

0.109

0.094

0.082

0.072

0.063

0.056

0.049

0.044

31.899

24.225

18.520

14.255

11.047

8.621

6.773

5.358

4.266

3.419

2.758

2.238

1.827

1.500

1.238

1.027

0.857

0.718

0.605

0.512

0.435

0.371

0.318

0.274

0.236

0.205

0.178

0.155

0.136

0.120

0.105

0.093

0.083

0.074

51.791

37.172

27.005

19.843

14.728

11.044

8.362

6.389

4.922

3.825

2.994

2.361

1.876

1.500

1.207

0.978

0.797

0.653

0.538

0.446

0.371

0.311

0.261

0.221

0.187

0.160

0.137

0.117

0.101

0.088

0.076

0.067

0.058

0.051

46.786

35.530

27.162

20.907

16.203

12.644

9.934

7.858

6.257

5.015

4.045

3.283

2.680

2.200

1.816

1.507

1.257

1.053

0.887

0.751

0.638

0.544

0.466

0.401

0.346

0.300

0.261

0.228

0.200

0.175

0.155

0.137

0.121

0.108

75.961

54.520

39.607

29.103

21.601

16.198

12.264

9.370

7.219

5.609

4.391

3.463

2.751

2.200

1.771

1.434

1.169

0.958

0.789

0.654

0.545

0.456

0.383

0.324

0.275

0.234

0.200

0.172

0.149

0.129

0.112

0.098

0.085

0.075

70.179

53.295

40.743

31.360

24.304

18.966

14.901

11.787

9.386

7.523

6.067

4.924

4.019

3.300

2.724

2.260

1.885

1.580

1.331

1.126

0.957

0.816

0.700

0.602

0.520

0.450

0.392

0.342

0.299

0.263

0.232

0.205

0.182

0.162

113.941

81.779

59.411

43.654

32.401

24.297

18.396

14.055

10.829

8.414

6.586

5.195

4.126

3.300

2.656

2.152

1.753

1.437

1.184

0.981

0.817

0.684

0.575

0.486

0.412

0.351

0.301

0.258

0.223

0.193

0.168

0.146

0.128

0.113

4

Part Number NCPppXM472 NCPppXH682 NCPppXW682 NCPppXH103 NCPppXV103 NCPppXH153 NCPppXW153 NCPppXH223

Resistance

B-Constant

4.7kΩ

3500K

6.8kΩ

3380K

6.8kΩ

3950K

10kΩ

3380K

10kΩ

3900K

15kΩ

3380K

15kΩ

3950K

22kΩ

3380K

Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

95

100

105

110

115

120

125

105.705

79.126

59.794

45.630

35.144

27.303

21.377

16.869

13.411

10.735

8.653

7.018

5.726

4.700

3.879

3.219

2.685

2.250

1.895

1.604

1.363

1.163

0.996

0.857

0.740

0.641

0.558

0.487

0.426

0.375

0.330

0.292

0.259

0.230

133.043

100.756

77.076

59.540

46.401

36.482

28.904

23.047

18.509

14.974

12.189

9.978

8.215

6.800

5.654

4.725

3.967

3.344

2.829

2.404

2.050

1.759

1.515

1.309

1.135

0.988

0.862

0.755

0.662

0.583

0.515

0.457

0.406

0.361

234.787

168.515

122.422

89.953

66.766

50.066

37.906

28.963

22.313

17.338

13.571

10.705

8.503

6.800

5.474

4.434

3.613

2.961

2.440

2.022

1.683

1.409

1.185

1.001

0.849

0.724

0.620

0.532

0.459

0.398

0.346

0.302

0.264

0.232

195.652

148.171

113.347

87.559

68.237

53.650

42.506

33.892

27.219

22.021

17.926

14.674

12.081

10.000

8.315

6.948

5.834

4.917

4.161

3.535

3.014

2.586

2.228

328.996

237.387

173.185

127.773

95.327

71.746

54.564

41.813

32.330

25.194

19.785

15.651

12.468

10.000

8.072

6.556

5.356

4.401

3.635

3.019

2.521

2.115

1.781

293.478

222.256

170.021

131.338

102.355

80.474

63.759

50.838

40.828

33.032

26.888

22.010

18.121

15.000

12.472

10.422

8.751

7.375

6.241

5.302

4.521

3.879

3.341

2.887

2.503

517.912

371.724

270.048

198.426

147.278

110.439

83.617

63.888

49.221

38.245

29.936

23.613

18.756

15.000

12.074

9.780

7.969

6.531

5.382

4.459

3.713

3.108

2.613

2.208

430.434

325.976

249.364

192.629

150.121

118.029

93.514

74.563

59.881

48.446

39.436

32.282

26.577

22.000

18.292

15.285

12.834

10.817

9.154

7.777

6.631

5.690

4.901

4.234

3.671

3.195

2.790

1.925

1.669

1.452

1.268

1.110

0.974

0.858

0.758

1.509

1.284

1.097

0.941

0.810

0.701

0.608

0.530

1.873

1.597

1.367

1.174

1.013

0.878

0.763

0.665

2.178

1.902

1.664

1.461

1.287

1.137

1.007

0.895

2.441

2.142

1.888

1.668

1.477

1.312

1.169

0.672

0.596

0.531

0.463

0.406

0.358

0.582

0.511

0.797

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

Continued on the following page.

2

15

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Continued from the preceding page.

Part Number NCPppXW223 NCPppWL223 NCPppWB333 NCPppWF333 NCPppWL333 NCPppWB473 NCPppWL473 NCPppWD683

Resistance

B-Constant

22kΩ

3950K

22kΩ

4485K

33kΩ

4050K

33kΩ

4250K

33kΩ

4485K

47kΩ

4050K

47kΩ

4485K

68kΩ

4150K

Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

759.605

545.196

396.070

291.025

216.008

161.977

122.638

93.702

72.191

56.093

43.907

34.633

27.509

22.000

17.709

14.344

11.688

9.578

1073.436

753.900

535.073

383.590

277.643

202.813

149.462

111.082

83.233

62.858

47.831

36.664

28.304

22.000

17.214

13.557

10.744

8.566

1227.263

874.449

630.851

460.457

339.797

253.363

190.766

144.964

111.087

85.842

66.861

52.470

41.471

33.000

26.430

21.298

17.266

14.076

11.538

9.506

1451.049

1019.238

725.084

522.021

379.842

279.371

207.566

155.639

117.814

89.925

69.204

53.675

41.937

33.000

26.143

20.845

16.723

13.498

10.954

8.940

1610.154

1130.850

802.609

575.385

416.464

304.219

224.193

166.623

124.850

94.287

71.747

54.996

42.455

33.000

25.822

20.335

16.115

12.849

10.306

8.314

1747.920

1245.428

898.485

655.802

483.954

360.850

271.697

206.463

158.214

122.259

95.227

74.730

59.065

47.000

37.643

30.334

24.591

20.048

16.433

13.539

11.209

9.328

2293.249

1610.605

1143.110

819.487

593.146

433.281

319.305

237.312

177.816

134.287

102.184

78.327

60.467

47.000

36.776

28.962

22.952

18.301

14.679

11.842

9.607

2735.359

1937.391

1389.345

1008.014

738.978

547.456

409.600

309.217

235.606

180.980

140.139

109.344

85.929

68.000

54.167

43.421

35.016

28.406

23.166

18.997

15.657

12.967

10.794

9.021

7.894

6.540

5.446

4.559

3.832

3.239

6.871

5.543

4.497

3.669

3.009

2.481

4

7.870

6.549

5.475

4.595

7.334

6.046

5.011

4.170

6.746

5.503

4.513

3.721

65

70

75

7.837

6.428

5.300

7.798

6.544

80

2.748

2.056

3.874

3.487

3.084

5.518

4.393

7.575

85

2.342

1.713

3.282

2.928

2.569

4.674

3.659

6.387

90

2.004

1.434

2.789

2.469

2.151

3.972

3.063

5.407

95

1.722

1.206

2.379

2.091

1.809

3.388

2.577

4.598

100

105

110

115

120

125

1.486

1.287

1.119

0.975

0.854

0.750

1.019

0.866

0.739

0.633

0.545

0.471

2.038

1.751

1.509

1.306

1.134

0.987

1.777

1.516

1.298

1.116

0.962

0.832

1.529

1.299

1.108

0.949

0.817

0.707

2.902

2.494

2.150

1.860

1.615

1.406

2.178

1.849

1.578

1.352

1.164

1.006

3.922

3.359

2.887

2.489

2.155

1.870

Part Number NCPppWF683 NCPppWL683 NCPppWF104

NCPppWL104 NCPppWL154 NCPppWM154 NCPppWL224

NCP18WF104F

100kΩ±1%

4200K

Resistance

B-Constant

100kΩ

150kΩ

220kΩ

68kΩ

4250K

68kΩ

4485K

100kΩ

4250K

4485K

4500K

4485K

Temp. (°C) Resistance (kΩ) Resistance (kΩ)

Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)

Resistance (kΩ) Resistance (kΩ)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

2990.041

2100.247

1494.113

1075.679

782.705

575.674

427.712

320.710

242.768

185.300

142.603

110.602

86.415

68.000

53.871

42.954

34.460

27.814

22.572

18.422

15.113

12.459

10.325

8.592

3317.893

2330.237

1653.862

1185.641

858.168

626.875

461.974

343.345

257.266

194.287

147.841

113.325

87.484

68.000

53.208

41.903

33.208

26.477

21.237

17.133

13.900

11.339

9.300

4397.119

3088.599

2197.225

1581.881

1151.037

846.579

628.988

471.632

357.012

272.500

209.710

162.651

127.080

100.000

79.222

63.167

50.677

40.904

33.195

27.091

22.224

18.323

15.184

12.635

10.566

8.873

4879.254

3426.818

2432.149

1743.590

1262.012

921.875

679.373

504.919

378.333

285.717

217.414

166.654

128.653

100.000

78.247

61.622

48.835

38.937

31.231

25.195

20.441

16.675

13.677

11.277

9.346

7318.881

5140.228

3648.224

2615.385

1893.018

1382.813

1019.059

757.379

567.499

428.575

326.121

249.981

192.979

150.000

117.370

92.433

73.252

58.406

46.846

37.793

30.661

25.013

20.516

16.916

14.019

11.678

9.776

7899.466

5466.118

3834.499

2720.523

1951.216

1415.565

1036.984

767.079

572.667

431.264

327.405

250.538

193.166

150.000

117.281

92.293

73.090

58.240

46.665

37.605

30.453

24.804

20.293

16.679

13.776

11.428

9.520

10734.358

7539.001

5350.729

3835.898

2776.427

2028.126

1494.620

1110.822

832.332

628.577

478.310

366.639

283.036

220.000

172.143

135.569

107.436

85.662

68.708

55.429

44.970

36.686

30.090

24.810

20.562

17.128

4205.686

2966.436

2118.789

1531.319

1118.422

825.570

615.526

463.104

351.706

269.305

207.891

161.722

126.723

100.000

79.439

63.509

51.084

41.336

33.628

27.510

22.621

18.692

15.525

12.947

10.849

9.129

65

70

75

80

85

90

7.668

6.356

5.294

4.432

7.185

6.033

5.087

7.785

6.517

7.481

7.713

14.338

95

4.309

3.728

6.337

5.482

8.223

7.966

12.061

6.546

100

105

110

115

120

125

3.661

3.124

2.675

2.299

1.983

1.715

3.151

2.676

2.283

1.956

1.684

1.456

5.384

4.594

3.934

3.380

2.916

2.522

4.634

3.935

3.357

2.877

2.476

2.141

6.951

5.902

5.035

4.315

3.714

3.211

6.688

5.639

4.772

4.052

3.454

2.955

10.194

8.657

7.385

6.329

5.448

4.710

5.572

4.764

4.087

3.518

3.040

2.634

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

Continued on the following page.

16

3

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Temperature Characteristics (Center Value)

Continued from the preceding page.

Part Number NCPppWM224 NCPppWM474

Resistance

B-Constant

220kΩ

4500K

470kΩ

4500K

Temp. (°C) Resistance (kΩ) Resistance (kΩ)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

11585.884

8016.973

5623.931

3990.100

2861.784

2076.162

1520.909

1125.049

839.912

632.521

480.194

367.455

283.310

220.000

172.012

135.364

107.198

85.419

24751.661

17127.169

12014.762

8524.305

6113.811

4435.437

3249.216

2403.515

1794.358

1351.294

1025.870

785.018

605.252

470.000

367.480

289.186

229.014

182.485

146.215

117.828

95.420

68.441

55.153

44.665

4

65

36.379

77.718

70

29.763

63.584

75

24.462

52.260

80

20.205

43.166

85

16.761

35.808

90

13.962

29.828

95

11.684

24.961

100

105

110

115

120

125

9.809

8.270

6.998

5.942

5.067

4.334

20.955

17.668

14.951

12.695

10.824

9.259

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

4

17

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type !Caution/Notice

■ !Caution (Storage and Operating Conditions)

This product is designed for application in an

ordinary environment (normal room temperature,

humidity and atmospheric pressure).

2. Volatile or flammable gas

3. Dusty conditions

4. Under vacuum, or under high or low-pressure

5. Wet or humid locations

Do not use under the following conditions because

all these factors can deteriorate the product

characteristics or cause failures and burn-out.

1. Corrosive gas or deoxidizing gas

6. Places with salt water, oils, chemical liquids or

organic solvents

7. Strong vibrations

(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,

Sulfuric acid gas, Nitric oxide gas, etc.)

8. Other places where similar hazardous conditions

exist

■ !Caution (Others)

Be sure to provide an appropriate fail-safe function

on your product to prevent secondary damages that may be

caused by the abnormal function or the failure of our

product.

4

■ Notice (Storage and Operating Conditions)

To keep solderability of product from declining, the

following storage condition is recommended.

1. Storage condition:

Temperature -10 to +40 degrees C

Humidity less than 75%RH (not dewing condition)

2. Storage term:

Use this product within 6 months after delivery by

first-in and first-out stocking system.

3. Storage place:

Do not store this product in corrosive gas

(Sulfuric acid gas, Chlorine gas, etc.) or in direct

sunlight.

■ Notice (Rating)

Use this product within the specified temperature

range.

Higher temperature may cause deterioration of the

characteristics or the material quality of this

product.

■ Notice (Handling)

The ceramic of this product is fragile, and care must

be taken not to load an excessive press - force or

not to give a shock at handling.

Such forces may cause cracking or chipping.

18

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type !Caution/Notice

■ Notice (Soldering and Mounting)

1. Mounting Position

Choose a mounting position that minimizes the stress

Component Direction

imposed on the chip during flexing or bending of the

Locate this

product

board.

horizontal to the

direction in

which stress

acts.

Mounting Close to Board Separation Line

C

Perforation

Holes

B

Keep this product on the

PC Board away from the

Separation Line.

D

A

Slit

Worst ← A-C-B-D → Better

4

2. Allowable Soldering Temperature and Time

(a) Solder within the temperature and time combinations,

indicated by the slanted lines in the fllowing graphs.

(b) The excessive soldering conditions may cause

dissolution of metallization or deterioration of solder-

wetting on the external electrode.

NCP03/15 Series

Allowable Reflow Soldering Temp. and Time

280

270

260

250

240

230

220

(c) In case of repeated soldering, the accumulated soldering

time should be within the range shown below figure. (For

example, Reflow peak temperature: 260°C, twice -> The

total accumulated soldering time at 260°C is within 30

seconds.)

0

10 20 30 40 50 60 70 80 90

Time (sec.)

NCP18/21 Series

Allowable Flow Soldering Temp. and Time

Allowable Reflow Soldering Temp. and Time

280

270

260

250

240

230

220

210

280

270

260

250

240

230

220

210

0

10

20

30

0

10 20 30 40 50 60 70 80 90 100110

Time (sec.)

Continued on the following page.

1

19

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type !Caution/Notice

Continued from the preceding page.

3. Recommendable Temperature Profile for Soldering

(a) Insufficient preheating may cause a crack on ceramic

NCP03/15 Series

body. The difference between preheating temperature

Reflow Soldering Conditions

and maximum temperature in the profile shall be 100 °C.

(b) Rapid cooling by dipping in solvent or by other means is

not recommended.

Gradual Cooling

(in air)

Preheating (in air) Soldering

300

200

100

0

1-2 min.

*20sec.

Preheating: 160±10°C, 1-2 min.

Soldering: 240-270°C, 20sec.

* In case of repeated soldering, the accumulated soldering

time should be within the range shown above figure 2.

NCP18/21 Series

Flow Soldering Conditions

Reflow Soldering Conditions

4

Gradual Cooling

Preheating (in air) Soldering

(in air)

Preheating (in air) Soldering

(in air)

300

200

100

0

300

200

100

0

1-2 min.

*10sec.

*20sec.

Preheating: 160±10°C, 1-2 min.

Soldering: 230-260°C, 10sec.

Preheating: 160±10°C, 1-2 min.

Soldering: 230-270°C, 20sec.

4. Solder and Flux

(1) Solder and Paste

•Sn:Pb=63wt%:37wt%

(a) Reflow Soldering: NCP03/15/18/21 Series

Use RA/RMA type or equivalent type of solder paste. For

your reference, we are using the solder paste below for

any internal tests of this product.

•Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%

(2) Flux

Use rosin type flux in soldering process.

If below flux is used, some problems might be caused in

the product characteristics and reliability.

Please do not use below flux.

•RMA9086 90-4-M20 (Sn:Pb=63wt%:37wt%)

(Manufactured by Alpha Metals Japan Ltd.)

•M705-221BM5-42-11 (Sn:Ag:Cu=96.5wt%:3.0wt%:0.5wt%)

(Manufactured by Senju Metal Industry Co., Ltd.)

(b) Flow Soldering: NCP18/21 Series

• Strong acidic flux (with halide content exceeding

0.1wt%).

• Water-soluble flux

We are using the solder paste below for any internal tests

of this product.

(*Water-soluble flux can be defined as non rosin type

flux including wash-type flux and non-wash-type flux.)

5. Cleaning Conditions

NCP03/15

NCP18/21

For removing the flux after soldering, observe the following

points in order to avoid deterioration of the characteristics or

any change of the external electrodes' quality.

• Please keep mounted parts and a substrate from an

occurance of resonace in ultrasonic cleaning.

• Please do not clean the products in the case of using a

non-washed type flux.

Solvent

Isopropyl Alcohol

Less than 5 minutes at

Dipping Cleaning room temp. or less than room temp. or less than

2 minutes at 40°C max. 2 minutes at 40°C max.

Less than 5 minutes at

Less than 5 minutes and Less than 1 minute and

20W/r

Frequency of 28kHz to

40kHz

20W/r

Frequency of several

10kHz to 100kHz

Ultrasonic Cleaning

6. Drying

After cleaning, promptly dry this product.

Continued on the following page.

20

2

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type !Caution/Notice

Continued from the preceding page.

7. Printing Conditions of Solder Paste

The amount of solder is critical. Standard height of fillet is

Reference: Optimum Solder Amount

shown in the table below.

Too much soldering may cause mechanical stress,

resulting in cracking, mechanical and/or electronic

E

T

damage.

Electrode

Solder

Part Number

The Solder Paste Thickness

T

NCP03

100µm

150µm

200µm

1/3EVTVE

0.2mmVTVE

NCP15

NCP18/NCP21

4

8. Adhesive Application and Curing

Thin or insufficient adhesive may result in loose

component contact with land during flow soldering.

Low viscosity adhesive causes chips to slip after

mounting.

3

21

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Package

Minimum Quantity Guide

Quantity (pcs.)

Part Number

Paper Tape

15000

10000

4000

Embossed Tape

NCP03

NCP15

NCP18

NCP21

-

4000

Tape Carrier Packaging

1. Dimensions of Reel

2.0±0.5

ø13.0±0.2

ø21.0±0.8

4

W1.0

Y0

9.0

W0

Y1.5

13.0±1.0

ø180

(in mm)

2. Taping Method

(1) A tape in a reel contains Leader unit and Trailer unit where

products are not packed. (Please refer to the figure right.)

(2) The top and base tapes or plastic and cover tape are not

stuck at the first five pitches minimum.

Leader Unit

190-250 210-250

40 min.

Trailer Unit

Vacant Section Top Tape alone

Cover Tape alone

Chip-mounting Unit

(3) A label should be attached on the reel. (MURATA's part

number, inspection number and quantity should be marked

on the label.)

(4) Taping reels are packed in a package.

Direction of Feed

(in mm)

Continued on the following page.

1

22

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Package

Continued from the preceding page.

3. Paper Tape (NCP03/15/18 Series)

NCP03 Series

NCP15 Series

2.0±0.05

4.0±0.1

2.0±0.05

4.0±0.1

0.5 max.

0.8 max.

ø1.5+0.1/–0

0.38

0.65

Direction of Feed

Reference Value

NCP18 Series

2.0±0.05

4.0±0.1 4.0±0.1

1.1 max.

ø1.5+0.1/–0

4

1.05

Direction of Feed

Reference Value

(in mm)

(1) Other Conditions

(a) Packaging

Products are packaged in the cavity of the base tape and

sealed by top tape and bottom tape.

(b) Tape

Top tape and bottom tape have no joints and products

are packaged and sealed in the cavity of the base tape,

continuously.

(2) Peeling Force of Top Tape

F

165-180 °

1 Peeling angle: 165 to 180 degrees against the fixed surface of tape.

2 Peeling speed: 300mm/min.

3 Peeling force: 0.1 - 0.6N

(3) Pull Strength

Pull strength of top tape is specified at 10N minimum.

Pull strength of bottom tape should be specified 5N minimum.

Continued on the following page.

2

23

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temp. Sensor and Compensation Chip Type Package

Continued from the preceding page.

4. Embossed Tape (NCP21 Series)

(1) Other Conditions

(a) Packaging

2.0±0.05

1.05

0.2

Products are packaged in each cavity of the Embossed

tape and sealed by Cover tape.

4.0±0.1

+0.1

-1

φ1.5

(b) Tape

Cover tape has no joints.

+0.3

-0

φ1.0

1.45

Reference Value

(in mm)

Direction of Feed

(2) Peeling Force of Cover Tape

165-180 °

4

1 Peeling angle: 165 to 180 degrees against the fixed surface of tape.

2 Peeling speed: 300mm/min.

3 Peeling force: 0.1 - 0.7N

(3) Tape Strength

Pull strength of Embossed tape and Cover tape should be

specified 10N minimum.

3

24

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors

for Temperature Sensor Thermo String Type

1.2±0.4

This product is a small flexible lead type NTC Thermistor

with the small head and the thin lead wire.

■ Features

1. High accuracy and high sensibility temperature sensing

is available by the small size and high accuracy NTC

Thermistor.

ø0.30±0.05

2. Narrow space temperature sensing is available by the

small sensing head and the thin lead wire.

3. Flexibility and wide variety length (25 mm to 150mm)

enables designing flexible temperature sensing

architectures.

(in mm)

The full length 25mm, 30 to 150mm Interval 10mm.

NXFT15_1B Type(twist)

4. This product is compatible with our 0402 (EIA) size

chip Thermistor.

1.2±0.4

5. Excellent long time aging stability

6. This is halogen free product. *

* Cl= max.900ppm, Br=max.900ppm and

Cl+Br=max.1500ppm

7. NXFT series are recognized by UL/cUL.

(UL1434, File No.E137188).

5

ø0.30±0.05

■ Applications

1. Temperature compensation for transistor, IC and

crystal oscillator in mobile communications

2. Temperature sensor for rechargeable batteries

3. Temperature compensation of LCD

4. Temperature compensation in general use of electric

circuits

(in mm)

The full length 25mm, 30 to 150mm Interval 10mm.

NXFT15_2B Type(without twist)

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Operating Current

for Sensor (25°C)

(mA)

Rated Electric Typical Dissipation Thermal Time

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Power (25°C)

Constant (25°C)

(mW/°C)

Constant

(s)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mW)

NXFT15XH103FApBppp

NXFT15WB473FApBppp

NXFT15WF104FApBppp

10k

47k

3380 ±1%

4050 ±1%

4250 ±1%

3423

4091

4303

3431

4097

4311

3452

4114

4334

0.12

0.06

0.04

7.5

1.5

4

100k

p is the fulled with lead shape (1:twist, 2:without twist).

ppp is the fulled with Total-length codes. (25mm, 30 to 150mm interval 10mm, ex. 050=50mm)

Operating Current for Sensor rises Thermistor's temperature by 0.1.°C

Rated Electric Power is necessary electric power that Thermistor's temperature rises 5°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

25

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temperature Sensor Thermo String Type Specifications and Test Methods

No.

1

Item

Specifications

Test Methods

High Temperature

Storage Test

125±2°C in air, for 1000 +48/-0 hours without loading.

· Resistance (R25°C) fluctuation rate: less than ±1%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

Low Temperature

Storage Test

2

3

-40 +0/-3°C in air, for 1000 +48/-0 hours without loading.

Humidity

Storage Test

60±2°C, 90 to 95%RH in air, for 1000 +48/-0 hours without

loading.

-40 +0/-3°C, 30 minutes in air

+25±2°C, 10 to 15 minutes in air

+125±2°C, 30 minutes in air

+ 25 +2/-0°C, 10 to 15 minutes in air (1 cycle)

Continuous 100 cycles, without loading.

Temperature

Cycle

· Resistance (R25°C) fluctuation rate: less than ±2%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

4

High Temperature

Load

85±2°C in air, with 'Operating Current for Sensor' for 1000

+48/-0 hrs.

5

6

2mm length of coating resin from the top of Thermistor is to be

dipped into beads of lead (Pb), and DC100V 1 minute is

applied to circuit between beads of lead (Pb) and lead wire.

Insulation Break -

down Voltage

· No damage electrical characteristics on DC100 V, 1 min.

Both lead wires are dipped into 350±10°C solder for 3.5±0.5

seconds, or 260±5°C solder for 10±1 seconds according to

Fig-1. (solder <JIS Z 3282 H60A>)

Resistance to

Soldering Heat

· Resistance (R25°C) fluctuation rate: less than ±1%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

7

5

1 to 2mm

Solder

Fig-1

Both lead wires are dipped into flux (25wt% colophony <JIS K

5902> isopropyl alcohol <JIS K 8839>) for 5 to 10 seconds.

Then both lead wires are dipped into 235±5°C solder

<JIS Z 3282 H60A> for 2±0.5 seconds according to Fig-1.

8

Solderability

More than 90% of lead wire surface shall be covered by solder.

The lead wire shall be inserted in a ø1.0mm hole until resin part

contacts with a substrate as shown in fig.-2. And 1N force for

10 seconds shall be applied to the lead wire.

Lead Wire

Pull Strength

· Resistance (R25°C) fluctuation rate: less than ±1%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

9

1N (10 sec.)

Fig-2

Hold the lead wires like Fig-3. Bend by 90 degrees and again

bend back to the initial position. Then bend to the other side by

90 degrees and again bend back to the initial position. After

bending process, 10N force for 3 seconds shall be applied to

the lead wire.

Lead Wire

Bending Strength

10

· Lead wire does not break.

10N (3 sec.)

Fig-3

* · R25 is zero-power resistance at 25°C.

· B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C.

· After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).

Continued on the following page.

26

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temperature Sensor Thermo String Type Specifications and Test Methods

Continued from the preceding page.

No.

Item

Specifications

Test Methods

NTC Thermistor shall be dropped without any force onto

concrete floor from 1 meter height one time.

11 Free Fall

NTC Thermistor shall be fixed to the vibration test equipment.

Vibration of total 1.5 mm amplitude, Frequency sequence of

10Hz - 55Hz - 10Hz in 1 minute, shall be applied for right

angled 3 directions for each 2 hours duration.

· Resistance (R25°C) fluctuation rate: less than ±1%.

· B-Constant (B25/50°C) fluctuation rate: less than ±1%.

· No visible damage at resin part.

12 Vibration

Mount

The oscillating

Direction Z

Solder is attached

from the reverse side.

The oscillating

Direction Y

The oscillating

Direction X

* · R25 is zero-power resistance at 25°C.

· B25/50 is calculated by zero-power resistance of Thermistor in 25°C -50°C.

· After each test, NTC Thermistor should be kept for 1 hour at room temperature (normal humidity and normal atmospheric pressure).

5

27

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors

for Temperature Sensor Lead Type

3.0 max. ( 3.3 max.) 1.8 max. ( 2.5 max.)

This product is a sensor type NTC Thermistor to be

useful in the normal temperature range developed by

the unique ceramic technology and the automatic

assembly.

Epoxy Resin

■ Features

Solder Plated Copper Ply Wire

ø0.4±0.03

1. High-accuracy of B-Constant tolerance +/-0.5%

+/-1% of resistance and +/-0.5% of B-Constant is

2.5±1.0

realized due to technical advantages of the

Applicable to NTSA0XM202, NTSA0WB203

and NTSA0WC303 Types.

material and manufacturing process.

(in mm)

2. Quick response

This product provides faster response time due

to its smaller size.

3. Taping type is available.

4. Strong lead strength

Original lead-wiring technique assures reliable

connection. It can be formed and bent flexibly

according to the mounting conditions.

■ Applications

1. Rechargeable batteries

2. Battery charging circuits

3. Head of printers

4. DC fan motors

5. Home appliance equipments

6

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation Thermal Time

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

Constant

(s)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NTSA0XM202pE1B0

NTSA0XR502pE1B0

NTSA0XH103pE1B0

NTSA0XV103pE1B0

NTSA0WB203pE1B0

NTSA0WC303pE1B0

NTSA0WD503pE1B0

NTSA0WF104pE1B0

2.0k

5.0k

10k

20k

30k

50k

100k

3500 ±0.5%

3700 ±1%

3380 ±0.5%

3900 ±0.5%

4050 ±1%

4100 ±1%

4150 ±1%

4250 ±1%

3523

3727

3428

3930

4078

4128

4205

4303

3526

3738

3434

3934

4080

4130

4213

4311

3543

3760

3455

3944

4096

4147

4234

4334

1.05

0.68

0.38

0.46

0.31

0.26

0.20

0.14

21

15

21

15

2.1

1.5

2.1

1.5

7

A blank column is filled with resistance tolerance codes (F: ±1%, E: ±3%).

Rated Electric Power is necessary electric power that Thermistor's temperature rises 10°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

Taping type of part numbers with "N6A0" is available (Lead spacing=5mm).

28

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors

for Temperature Sensor Lead Insulation Type

3.0 max. ( 3.8 max.)

2.0 max. ( 2.5 max.)

This product is a sensor type NTC Thermistor to be

useful in the normal temperature range developed by

the unique ceramic technology and the automatic

assembly.

+1.5

−0.5

2.5

■ Features

0.60-0.95

1. Electric insulation on lead wire

ø0.4±0.03

2. Excellent bending resistance due to suitable

hardness of surface coating

(Solder Plated

Copper Ply Wire)

NTSD0 Series

Applicable to NTSD0XM202, NTSD0WB203

and NTSD0WC303 Types.

3. Easy handling due to most suitable hardness of

surface of coating

(in mm)

4. High-accuracy of B-Constant tolerance +/-0.5%

+/-1% of resistance and +/-0.5% of B-Constant is

realized due to technical advantages of the

material and manufacturing process.

3.0 max. ( 3.8 max.)

2.0 max. ( 2.5 max.)

Epoxy Resin

ø0.46±0.03

Polyurethane Wire

2.5^+1.5

-0.5

■ Applications

1. Rechargeable batteries

2. Battery charging circuits

3. Head of printers

ø0.45±0.05

Sn-Ag Solder Copper Wire

NTSD1XM202/NTSD1WB203/NTSD1WC303 Types

(0.8)

4. DC fan motors

(in mm)

Type

L (mm)

30

5. Home appliance equipments

NTSD1 Series

NTSD1_FPB30

NTSD1_FPB40

NTSD1_FPB50

40

50

NTSD0 Series

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation Thermal Time

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C) Constant (25°C)

Constant

(s)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

(mW/°C)

NTSD0XM202pE1B0

NTSD0XR502pE1B0

NTSD0XH103pE1B0

NTSD0XV103pE1B0

NTSD0WB203pE1B0

NTSD0WC303pE1B0

NTSD0WD503pE1B0

NTSD0WF104pE1B0

2.0k

5.0k

10k

20k

30k

50k

100k

3500 ±0.5%

3700 ±1%

3380 ±0.5%

3900 ±0.5%

4050 ±1%

4100 ±1%

4150 ±1%

4250 ±1%

3523

3727

3428

3930

4078

4128

4205

4303

3526

3738

3434

3934

4080

4130

4213

4311

3543

3760

3455

3944

4096

4147

4234

4334

1.05

0.68

0.38

0.46

0.31

0.26

0.20

0.14

21

2.1

7

15

21

15

1.5

2.1

1.5

7

A blank column is filled with resistance tolerance codes (F: ±1%, E: ±3%).

Rated Electric Power is necessary electric power that Thermistor's temperature rises 10°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

NTSD1 Series

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation Thermal Time

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C) Constant (25°C)

Constant

(s)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

(mW/°C)

NTSD1XM202FPBpp

NTSD1XR502FPBpp

NTSD1XH103FPBpp

NTSD1XV103FPBpp

NTSD1WB203FPBpp

NTSD1WC303FPBpp

2.0k ±1% 3500 ±0.5%

5.0k ±1% 3700 ±1%

10k ±1% 3380 ±0.5%

10k ±1% 3900 ±0.5%

20k ±1% 4050 ±1%

30k ±1% 4100 ±1%

3523

3727

3428

3930

4078

4128

3526

3738

3434

3934

4080

4130

3543

3760

3455

3944

4096

4147

1.05

0.68

0.38

0.46

0.31

0.26

21

2.1

7

15

21

1.5

2.1

Continued on the following page.

29

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

Resistance

(25°C)

(ohm)

B-Constant

(25-50°C)

(K)

B-Constant

Permissive Operating Rated Electric Typical Dissipation Thermal Time

Part Number

(25-80°C)

(25-85°C)

(25-100°C)

Current (25°C)

Power (25°C)

Constant (25°C)

(mW/°C)

Constant

(s)

(Reference Value) (K) (Reference Value) (K) (Reference Value) (K)

(mA)

(mW)

NTSD1WD503FPBpp

NTSD1WF104FPBpp

50k ±1% 4150 ±1%

100k ±1% 4250 ±1%

4205

4303

4213

4311

4234

4334

0.20

0.14

15

1.5

7

A blank column is filled with Total-length codes. (30, 40, 50)

Rated Electric Power is necessary electric power that Thermistor's temperature rises 10°C by self heating at 25°C in still air.

Operating Temperature Range: -40°C to +125°C

■ Temperature Tolerance - Temperature Characteristics

Resistance Tolerance: +/-1% B-Constant Tolerance: +/-1%

Resistance Tolerance: +/-1% B-Constant Tolerance: +/-0.5%

3.0

2.0

1.0

0

2.0

1.0

0

-50

0

50

100

150

-50

0

50

100

150

Temperature (°C)

7

30

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temperature Sensor Temperature Characteristics (Center Value)

Part Number NXFpXH103

NXFpWB473

47kΩ

NXFpWF104

100kΩ

Resistance

B-Constant

10kΩ

3380K

4050K

4250K

Temp. (°C) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

0

5

10

15

20

25

30

35

40

45

50

55

60

197.388

149.395

114.345

88.381

68.915

54.166

42.889

34.196

27.445

22.165

18.010

14.720

12.099

10.000

8.309

6.939

5.824

4.911

4.160

3.539

3.024

2.593

2.233

1690.590

1215.320

882.908

647.911

480.069

359.009

270.868

206.113

158.126

122.267

95.256

74.754

59.075

47.000

37.636

30.326

24.583

20.043

16.433

13.545

11.223

9.345

4221.280

2995.040

2147.000

1554.600

1136.690

839.019

624.987

469.678

355.975

272.011

209.489

162.559

127.057

100.000

79.222

63.167

50.677

40.904

33.195

27.091

22.224

18.323

15.184

12.635

10.566

8.873

65

70

75

80

7.818

6.571

5.548

4.704

1.929

1.673

1.455

85

90

1.270

4.004

7.481

95

1.112

3.422

6.337

100

105

110

115

120

125

0.976

0.860

0.759

0.673

0.598

0.532

2.936

2.528

2.184

1.893

1.646

1.436

5.384

4.594

3.934

3.380

2.916

2.522

Part Number

NTSppXM202 NTSppXR502 NTSppXH103 NTSppXV103 NTSppWB203 NTSppWC303 NTSppWD503 NTSppWF104

Resistance

20kΩ

30kΩ

50kΩ

100kΩ

2.0kΩ

5.0kΩ

10kΩ

B-Constant

Temp. (°C)

Y40

Y35

Y30

Y25

Y20

Y15

Y10

Y5

3500K

3700K

3380K

3900K

4050K

4100K

4150K

4250K

Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ) Resistance (kΩ)

44.657

33.505

25.388

19.402

14.961

11.644

9.133

7.198

5.716

4.571

3.682

2.987

2.437

2.000

1.651

1.371

1.143

0.958

0.807

0.683

0.582

0.497

0.426

0.367

0.318

0.276

0.240

0.210

0.183

0.161

0.142

0.125

0.111

0.099

123.484

92.295

69.614

52.860

40.480

31.275

24.339

19.154

15.148

11.964

9.520

7.624

6.160

5.000

4.082

3.354

2.773

2.299

1.914

1.607

1.356

1.149

0.978

0.834

0.714

0.612

0.527

0.456

0.396

0.345

0.302

0.264

0.232

0.205

195.652

148.171

113.347

87.559

68.237

53.650

42.506

33.892

27.219

22.021

17.926

14.674

12.081

10.000

8.315

6.948

5.834

4.917

4.161

3.535

3.014

2.586

2.228

347.808

248.591

179.973

131.832

97.679

73.119

55.301

42.257

32.582

25.324

19.847

15.679

12.478

10.000

8.068

6.552

5.353

4.399

3.635

3.020

2.521

2.115

1.783

733.007

524.831

380.184

277.845

205.260

153.642

116.016

88.125

67.522

52.168

40.617

31.847

25.151

20.000

16.014

12.902

10.457

8.527

6.993

5.771

4.789

3.992

3.343

2.809

2.376

2.020

1149.500

819.651

591.391

430.529

316.870

236.337

177.842

134.630

102.816

79.183

61.460

48.045

37.834

30.000

23.955

19.249

15.560

12.657

10.354

8.525

7.058

5.869

4.905

4.113

3.472

2.945

2.509

2.143

1.832

1.571

1.350

1.171

1.019

0.886

1948.575

1387.289

999.456

728.895

537.039

399.167

299.469

226.186

172.393

132.857

103.089

80.430

63.201

50.000

39.825

31.918

25.733

20.877

17.034

13.929

11.439

9.485

7.906

6.614

5.558

4.686

3.967

3.373

2.878

2.465

2.118

1.828

1.583

1.374

4256.752

3005.888

2148.514

1555.020

1137.312

839.314

625.338

469.127

355.224

272.045

209.803

162.713

127.117

100.000

79.215

63.150

50.649

40.885

33.195

27.014

22.079

18.226

15.124

12.598

10.542

8.852

0

5

10

15

20

25

30

35

40

45

50

55

60

65

70

75

80

85

90

95

100

105

110

115

120

125

7

1.925

1.669

1.452

1.268

1.110

0.974

0.858

0.758

1.510

1.284

1.096

0.939

0.808

0.698

0.605

0.527

1.724

1.476

1.264

1.085

0.935

0.812

0.708

0.617

7.463

6.321

5.374

4.585

3.925

3.376

2.913

2.520

0.671

0.596

0.531

0.460

0.403

0.354

Detailed Resistance - Temperature Tables are downloadable from the following URL.

http://search.murata.co.jp/Ceramy/CatsearchAction.do?sLang=en

31

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temperature Sensor Thermo String Type/Lead Type !Caution/Notice

■ !Caution (Storage and Operating Conditions)

This product is designed for application in an

ordinary environment (normal room temperature,

humidity and atmospheric pressure).

2. Volatile or flammable gas

3. Dusty conditions

4. Under vacuum, or under high or low-pressure

5. Wet or humid locations

Do not use under the following conditions because

all these factors can deteriorate the product

characteristics or cause failures and burn-out.

1. Corrosive gas or deoxidizing gas

6. Places with salt water, oils, chemical liquids or

organic solvents

7. Strong vibrations

(Chlorine gas, Hydrogen sulfide gas, Ammonia gas,

Sulfuric acid gas, Nitric oxide gas, etc.)

8. Other places where similar hazardous conditions

exist

■ !Caution (Others)

Be sure to provide an appropriate fail-safe function

on your product to prevent secondary damages that may be

caused by the abnormal function or the failure of our

product.

■ Notice (Storage and Operating Conditions)

To keep solderability of product from declining, the

following storage condition is recommended.

1. Storage condition:

3. Handling after unpacking:

After unpacking, reseal product promptly or

store it in a sealed container with a drying agent.

4. Storage place:

Temperature -10 to +40 degrees C

Humidity less than 75%RH (not dewing condition)

2. Storage term:

Do not store this product in corrosive gas

(Sulfuric acid gas, Chlorine gas, etc.) or in direct

sunlight.

Use this product within 6 months after delivery by

first-in and first-out stocking system.

■ Notice (Rating)

Use this product within the specified temperature

range.

Higher temperature may cause deterioration of the

characteristics or the material quality of this

product.

7

■ Notice (Soldering and Mounting) NTS Series

1. Be sure that the preheat-up does not melt the

soldering of this product. Excessive heat may

cause failure to open, short or insulation break

down.

2. Do not touch the body with soldering iron.

The soldering point should be min. 5mm away from

the root of lead wire.

32

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temperature Sensor Thermo String Type/Lead Type !Caution/Notice

■ Notice (Soldering and Mounting) NXF Series

Please notice as shown below when you mount this product.

1. Do not melt the solder in resin head, when you solder

this product. If you melt the solder in resin head,

it has posibility that the break of wire, short and

break of lead insulation. In case you cut the lead

wire of this product less than 20mm from resin head,

the heat of melted solder at lead wire edge is

propagated easily to the resin head along the lead

wire.

2. Do not touch the resin head directly by solder iron.

It may cause the melt of solder in resin head.

3. Do not separate the parallel lead wires 10mm or less

from theresin head, when you separate parallel lead

wires.

4. If you mold by resin this product, please evaluate

the qualityl of this product before you use it.

5. Do not bend the lead wire radius 1mm or less when

you bend the lead wire.

■ Notice (Handling)

1. The ceramic element of this product is fragile, and

care must be taken not to load an excessive

press-force or not to give a shock at handling.

Such forces may cause cracking or chipping.

2. Do not apply an excessive force to the lead.

Otherwise, it may cause junction between lead and

element to break or crack. Holding element by side

lead wire is recommended when lead wire is bent or

cut.

7

33

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Temperature Sensor Thermo String Type/Lead Type Package

Minimum Quantity

Minimum Quantity (pcs.)

Part Number

Bulk

1000

500

200

Ammo Pack Taping

NXF

-

NTSA

3000

NTSD0

-

NTSD1_30

NTSD1_40

NTSD1_50

Taping Dimensions (NTSA_N6A0 Series)

P2

P

∆S

∆h2

∆h1

T

D

e

H2

H0

P1

ød

W2

W0

F

L

W1

W

t2

t1

I

P0

øD0

Item

Code

Dimensions (mm)

12.7

P

P0

F

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

12.7±0.3

5.0+0.8/–0.2

6.35±1.3

P2

P1

D

Length from Hole Center to Component Center

Length from Hole Center to Lead

Body Diameter

3.85±0.8

3.5 max.

∆S

W

0±2.0

Deviation along Tape, Left or Right

Carrier Tape Width

18.0±0.5

7

W1

H0

H2

I

9.0±0.5

Position of Sprocket Hole

16.0±1.0

Lead Distance between Reference and Bottom Planes

Height of Component

4.0 max.

+0.5 to –1.0

4.0±0.1

Protrusion Length

D0

d

Diameter of Sprocket Hole

Lead Diameter

0.50±0.03

0.6±0.3

t1

Total Tape Thickness

t2

1.6 max.

Total Thickness, Tape and Lead Wire

Deviation across Tape

∆h1, ∆h2

L

1.0 max.

11.0+0/–2.0

11.0 min.

1.5±1.5

Portion to Cut in Case of Defect

Hole Down Tape Width

W0

W2

e

Hole Down Tape Position

Coating Extension on Lead

Body Thickness

Up to the crimp point

2.6 max.

T

(in mm)

34

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

NTC Thermistors

for Inrush Current Suppression Lead Type

NTPAN : 23.0 max.

This product effectively supresses surge currents

NTPAJ : 20.0 max.

5.5 max.

which are generated when switching power regulators

are turned on.

■ Features

Coating Extension

on Lead : to line A

A

1. Lead is not contained in the ceramic element, the

terminations, the solder for inner connection and

the coating resin.

ø0.8±0.05

Sn plated Cu wire

10.0±1.5

2. Most suitable for power supplies of less than 100W

3. Excellent recovery characteristics due to resin

coating with excellent heat characteristics

4. Highly reliable

NTPAN/NTPAJ Series

NTPAD/NTPAA Series

NTPA7/NTPA9 Series

(in mm)

NTPAD : 16.0 max.

NTPAA : 12.0 max.

5.5 max.

5.0 max.

■ Applications

1. Switching power supplies

2. CRT monitors

3. Color televisions

4. VCR-Power supplies

5. Other power circuits

Coating Extension

on Lead : to line A

A

ø0.8±0.05

Sn plated Cu wire

7.5±1.5

(in mm)

NTPA9 : 11.0 max.

NTPA7 : 9.0 max.

5.0 max.

Coating Extension

on Lead : to line A

A

ø0.6±0.05

Sn plated Cu wire

5.0±1.5

(in mm)

Resistance

(25°C)

(ohm)

Permissible Max.

Current (55°C)

(A)

Thermal Time

Constant (25°C)

(s)

Thermal Dissipation

Constant (25°C)

(mW/°C)

8

Part Number

Current (25°C)

(A)

NTPAN3R0LDKB0

NTPAN4R0LDKB0

NTPAN6R0LDKB0

NTPAJ4R0LDKB0

NTPAJ6R0LDKB0

NTPAJ8R0LDKB0

NTPAJ100LDKB0

NTPAD3R9LDNB0

NTPAD5R1LDNB0

NTPAD8R0LDNB0

NTPAD160LDNB0

NTPAA2R2LDNB0

3.0 ±15%

4.0 ±15%

6.0 ±15%

4.0 ±15%

6.0 ±15%

8.0 ±15%

10.0 ±15%

3.9 ±15%

5.1 ±15%

8.0 ±15%

16.0 ±15%

2.2 ±15%

5.4

4.7

3.9

4.0

3.4

3.0

2.6

3.3

3.0

2.7

2.0

3.7

4.7

4.1

3.4

3.5

2.9

2.6

2.2

2.9

2.6

2.3

1.7

3.2

135

130

125

130

65

26.8

21.8

18.2

18.8

18.7

19.1

13.5

85

65

100

70

Continued on the following page.

35

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Continued from the preceding page.

Resistance

(25°C)

(ohm)

Permissible Max.

Current (25°C)

(A)

Permissible Max.

Current (55°C)

(A)

Thermal Time

Constant (25°C)

(s)

Thermal Dissipation

Constant (25°C)

(mW/°C)

Part Number

NTPAA3R9LDNB0

NTPAA5R1LDNB0

NTPAA8R2LDNB0

NTPAA100LDNB0

NTPA9160LBMB0

NTPA74R0LBMB0

NTPA78R0LBMB0

NTPA7160LBMB0

NTPA7220LBMB0

3.9 ±15%

5.1 ±15%

8.2 ±15%

10.0 ±15%

16.0 ±15%

4.0 ±15%

8.0 ±15%

16.0 ±15%

22.0 ±15%

2.7

2.5

2.0

1.7

1.4

2.3

1.7

1.2

1.0

2.3

2.2

1.7

1.5

1.2

2.0

1.5

1.0

0.88

70

65

40

13.5

11.6

9.4

9.5

9.9

9.1

NTPAD/NTPAA/NTPA9/NTPA7 series are also availabe on tape. The final alphabet of the part number should be "DNB0=>D6A0", "BNB0 =>B1A0".

Operating Temperature Range: -20°C to +160°C

■ Permissible Electrolytic Capacitor

Voltage (AC)

100Vrms

120Vrms

132Vrms

220Vrms

240Vrms

264Vrms

Part Number

NTPAN

8600µF

5000µF

2700µF

1400µF

800µF

5972µF

3472µF

1875µF

972µF

556µF

486µF

396µF

4936µF

2870µF

1550µF

803µF

459µF

402µF

327µF

1777µF

1033µF

558µF

289µF

165µF

145µF

118µF

1493µF

868µF

469µF

243µF

139µF

122µF

99µF

1234µF

717µF

387µF

201µF

115µF

100µF

82µF

NTPAJ

NTPAD

NTPAA

NTPA9

NTPA74R0

NTPA78R0

NTPA7160

NTPA7220

700µF

570µF

400µF

278µF

230µF

83µF

69µF

57µF

■ Application Circuit

■ Determination of Allowable Current

1.0

NTC

−t˚

+

0.5

−

0

20

40

60

80

100

120

140

160

Ambient Temperature (˚C)

8

36

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

■ NTPAN3R0L Type

■ NTPAN4R0L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.01

0.1

1

10

0.01

0.1

1

10

Current (A)

■ NTPAN6R0L Type

■ NTPAJ4R0L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.1

1

0.1

1

■ NTPAJ6R0L Type

■ NTPAJ8R0L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.1

1

0.1

1

8

Continued on the following page.

37

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

Continued from the preceding page.

■ NTPAJ100L Type

■ NTPAD3R9L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.01

0.1

1

10

0.01

0.1

1

10

Current (A)

■ NTPAD5R1L Type

■ NTPAD8R0L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.1

1

0.1

1

■ NTPAD160L Type

■ NTPAA2R2L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.1

1

0.1

1

8

Continued on the following page.

38

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

Continued from the preceding page.

■ NTPAA3R9L Type

■ NTPAA5R1L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.01

0.1

1

10

0.01

0.1

1

10

Current (A)

■ NTPAA8R2L Type

■ NTPAA100L Type

Ta=25˚C

Ta=25°C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature

0.1

0.01

0.1

1

0.01

1

10

0.01

0.1

1

10

0.01

0.1

1

Current (A)

■ NTPA9160L Type

■ NTPA74R0L Type

Ta=25˚C

Ta=25°C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Thermistor's Temperature

0.1

0.01

0.1

1

0.01

1

10

0.01

0.1

1

10

0.1

1

Current (A)

8

Current (A)

Continued on the following page.

39

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

Current - R Ratio (RT/R25)/Current - Temperature Characteristics (Typical)

Continued from the preceding page.

■ NTPA78R0L Type

■ NTPA7160L Type

Ta=25˚C

10

1

1000

100

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

1

0.01

0.1

1

10

0.01

0.1

1

10

Current (A)

■ NTPA7220L Type

Ta=25˚C

10

1

1000

100

10

Resistance Ratio

Thermistor's Temperature (˚C)

0.1

0.01

1

0.01

0.1

1

10

Current (A)

8

40

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Inrush Current Suppression Lead Type !Caution/Notice

■ !Caution (Storage and Operating Conditions)

1. This product is designed for the Switching Power

(1) Corrosive gas or deoxidizing gas.

(Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) Volatile or flammable gas

(3) Dusty conditions

Supply with smoothing capacitors.

Other applications of this product may result in

fire.

2. Use this product within the specified maximum

current. Otherwise it may catch fire in the worst

case.

(4) Under high or low pressure

(5) Wet or humid conditions

3. Use this product with smoothing capacitor within

the specified maximum capacitance value. Otherwise

it may catch fire in the worst case.

(6) Near with salt water, oils, chemical liquids or

organic solvents

(7) Strong vibrations

4. This product is designed for application in an

ordinary environment

(8) Other places where similar hazardous conditions

exist.

(normal room temperature, humidity and atmospheric

pressure).

Do not use under the following conditions because

all these factors can deteriorate the

product characteristics cause failure and burn-out.

■ !Caution (Others)

Be sure to provide an appropriate fail-safe function

on your product to prevent secondary damages that may be

caused by the abnormal function or the failure of our

product.

■ Notice (Storage and Operating Conditions)

To keep solderability of product from declining, the

following storage condition is recommended.

1. Storage condition:

3. Handling after unpacking:

After unpacking, reseal product promptly or

store it in a sealed container with a drying agent.

4. Storage place:

Temperature -10 to +40 degrees C

Humidity less than 75%RH (not dewing condition)

2. Storage term:

Do not store this product in corrosive gas

(Sulfuric acid gas, Chlorine gas, etc.) or in direct

sunlight.

Use this product within 6 months after delivery by

first-in and first-out stocking system.

■ Notice (Rating)

Use this product within the specified temperature

range.

Higher temperature may cause deterioration of the

characteristics or the material quality of this

product.

8

■ Notice (Soldering and Mounting)

1. Be sure that the preheat-up does not melt the

soldering of this product. Excessive heat may

cause failure to open, short or insulation break

down.

2. Do not touch the body with soldering iron.

The soldering point should be min. 5mm away from

the root of lead wire.

41

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Inrush Current Suppression Lead Type !Caution/Notice

■ Notice (Handling)

1. When this product is operated, temperature of some

3. The ceramic element of this product is fragile, and

care must be taken not to load an excessive

press-force or not to give a shock at handling.

Such forces may cause cracking or chipping to the

element.

area may be about 160 (degree C).

Use proper surrounding parts and material which

withstand such temperature. If they are inadequate

and kept at high temperature for long time, they

may be deteriorated or may produce harmful gas.

And, such harmful gas may deteriorate the element

of this product.

4. Do not apply an excessive force to the lead wire.

Otherwise, it may cause break off junction between

lead wire and element, or may crack element.

So, fix lead wire of element side when lead wire

is bent or cut.

2. This product does not have waterproof construction.

Splashed water may cause failure mode such as

deterioration of characteristics or current leak.

So, do not apply cleaning to immerse it into water

or any solvent.

■ Notice (Others)

1. This product may allow passing higher current than

its initial value when it receives inrush current

again just after the last one until it cools down

and recovers its original resistance enough.

Be sure the highest current under actual condition

on the operating repetition and the operating

temperature.

2. The resin coating of this product does not

guarantee insulating. Keep an adequate insulating

distance to surrounding parts.

8

42

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Inrush Current Suppression Lead Type Package

■ Minimum Quantity

Minimum Quantity (pcs.)

Part Numbers

Bulk

500

300

150

100

50

Ammo Pack Taping

NTPA7

NTPA9

NTPAA

NTPAD

NTPAJ

NTPAN

1000

750

400

-

■ Taping Dimensions (NTPAD/NTPAA_D6A0 Series)

∆S

P2

D

P

∆h1

∆h2

T

A

P1

F

d

P0

Item

Code

Dimensions (mm)

30.0

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

P

P0

F

15.0±0.3

7.5±0.5

Length from Hole Center to Component Center

Length from Hole Center to Lead

Body Diameter

P2

P1

D

7.5±1.5

3.75±1.0

(refer to the table below)

±2.0

Body Thickness

T

Deviation Along Tape, Left or Right

Carrier Tape Width

∆S

W

18.0±0.5

Position of Sprocket Hole

W1

H0

H2

I

9.0±0.5

Lead Distance between Reference and Bottom Plane

Height of Component

16.0±0.5

10.0 max.

W0.5 to Y6.0

4.0±0.1

Protrusion Length

Diameter of Sprocket Hole

Lead Diameter

D0

d

0.8±0.05

Total Tape Thickness

t1

0.6±0.3

Total Thickness, Tape and Lead Wire

Deviation Across Tape

t2

2.0 max.

8

∆h1, ∆h2

L

2.0 max.

+0

–2.0

Portion to Cut in Case of Defect

Hold Down Tape Width

11.0

W0

W2

e

11.5 min.

4.0 max.

to line A

Hold Down Tape Position

Coating Extension on Lead

Type

NTPAD

NTPAA

D (mm)

16.0 max.

12.0 max.

T (mm)

5.5 max.

5.0 max.

Continued on the following page.

43

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

!Note

R44E.pdf

sales representatives or product engineers before ordering.

^{• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering}1^.0.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

for Inrush Current Suppression Lead Type Package

Continued from the preceding page.

■ Taping Dimensions (NTPA9/NTPA7_B1A0 Series)

∆S

P2

P

∆h1

∆h2

D

T

A

P1

F

d

P0

Item

Code

P

Dimensions (mm)

Pitch of Component

Pitch of Sprocket Hole

Lead Spacing

12.7

P0

F

12.7±0.3

+0.8

5.0

–0.3

Length from Hole Center to Component Center

Length from Hole Center to Lead

Body Diameter

P2

P1

D

6.35±1.3

3.85±0.8

(refer to the table below)

5.0 max.

Body Thickness

T

Deviation Along Tape, Left or Right

Carrier Tape Width

∆S

W

W1

H0

H2

I

±1.5

18.0±0.5

+0.5

–0.75

Position of Sprocket Hole

9.0

Lead Distance between Reference and Bottom Planes

Height of Component

16.0±1.0

6.0 max.

W0.5 to Y4.0

4.0±0.3

Protrusion Length

Diameter of Sprocket Hole

Lead Diameter

D0

d

0.6±0.05

0.6±0.3

Total Tape Thickness

t1

Total Thickness, Tape and Lead Wire

Deviation Across Tape

t2

2.0 max.

∆h1, ∆h2

1.5 max.

+0

Portion to Cut in Case of Defect

Hold Down Tape Width

L

11.0

–2.0

W0

W2

e

11.0 min.

4.0 max.

to line A

Hold Down Tape Position

Coating Extension on Lead

Type

NTPA9

NTPA7

D (mm)

11.0 max.

9.0 max.

8

44

• This PDF catalog is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s specifications are subject to change or our products in it may be discontinued without advance notice. Please check with our

sales representatives or product engineers before ordering.

!Note

R44E.pdf

10.2.22

• This PDF catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.


型号：	NTPAA8R2LDNB0
厂家：	muRata
描述：	NTC Thermistors NTC热敏电阻
文件：	总47页 (文件大小：1370K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

NTPAA8R2LDNB0 [MURATA]

相关型号：

NTPAD160LD6A0

NTPAD160LDNB0

NTPAD3R9LD6A0

NTPAD3R9LDNB0

NTPAD5R1LD6A0

NTPAD5R1LDNB0

NTPAD8R0LD6A0

NTPAD8R0LDNB0

NTPAJ100LDKB0

NTPAJ4R0LDKB0

NTPAJ6R0LDKB0

NTPAJ8R0LDKB0