PLA10AN1330R5D2M [MURATA]

AC Line Filters Common Mode Choke Coil PLA10 Series; AC线滤波器共模扼流线圈PLA10系列


型号：	PLA10AN1330R5D2M
厂家：	muRata
描述：	AC Line Filters Common Mode Choke Coil PLA10 Series AC线滤波器共模扼流线圈PLA10系列电源滤波器过滤器 LTE
文件：	总3页 (文件大小：88K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Common Mode Choke Coil

Data Sheet

AC Line Filters

Common Mode Choke Coil

PLA10 Series

PLA10 Series Standard Winding Type

Dimension

Insertion Loss Characteristics (Main)

16 max.

18 max.

PLA1±AN1522R±R2

PLA1±AN1821R7R2

PLA1±AN2221R5R2

PLA1±AN3±21R3R2

PLA1±AN3521R2R2

PLA1±AN5521R±R2

2±

4±

PLA1±AN742±R8R2

PLA1±AN1±3±R7R2

PLA1±AN123±R6R2

PLA1±AN2±3±R5R2

PLA1±AN3±3±R4R2

PLA1±AN433±R3R2

6±

8±

ø±.9 max.

13±±.5

1±±±.5

(1)

(4)

[(1)]

(3)

±.±1

±.1

1±

1±±

[(2)]

[(3)]

[(2)]

Frequency (MHz)

(in mm)

Rated Value ( : packaging code)

Part Number

Common Mode Inductance (min.)

Rated Current

Rated Voltage

Insulation Resistance (min.)

PLA10AN1522R0R2

PLA10AN1821R7R2

PLA10AN2221R5R2

PLA10AN3021R3R2

PLA10AN3521R2R2

PLA10AN5521R0R2

PLA10AN7420R8R2

PLA10AN1030R7R2

PLA10AN1230R6R2

PLA10AN2030R5R2

PLA10AN3030R4R2

PLA10AN4330R3R2

1.5mH

1.8mH

2.2mH

3.0mH

3.5mH

5.5mH

7.4mH

10.0mH

12.0mH

20.0mH

30.0mH

43.0mH

2.0A

1.7A

1.5A

1.3A

1.2A

1.0A

0.8A

0.7A

0.6A

0.5A

0.4A

0.3A

300V

100M ohm

Operating Temperature Range: -25°C to 60°C

Winding Temperature Rise (at Rated Current): 60°C (max.)

Continued on the following page.

oThis data sheet is applied for AC Line Filters Common Mode Choke Coil used for General Electronics equipment for your design.

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁcations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁcations because there is no space for detailed speciﬁcations. Therefore, please approve our product

speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

2012.7.5

http://www.murata.com/

Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Common Mode Choke Coil

Data Sheet

Continued from the preceding page.

PLA10 Series Sectional Winding Type

Dimension

Insertion Loss Characteristics (Main)

18 max.

16 max.

PLA1±AN9±12R±D2

PLA1±AN1321R7D2

PLA1±AN1821R5D2

PLA1±AN2±21R3D2

2±

4±

PLA1±AN3621R±D2

PLA1±AN772±R7D2

PLA1±AN133±R5D2

PLA1±AN223±R4D2

PLA1±AN363±R3D2

6±

8±

ø±.9 max.

13±±.5

1±±±.5

(1)

(4)

[(1)]

(3)

±.±1

±.1

1±

1±±

[(2)]

[(3)]

[(2)]

Frequency (MHz)

(in mm)

Rated Value ( : packaging code)

Part Number

Common Mode Inductance (min.)

Rated Current

Rated Voltage

Insulation Resistance (min.)

PLA10AN9012R0D2

PLA10AN1321R7D2

PLA10AN1821R5D2

PLA10AN2021R3D2

PLA10AN3621R0D2

PLA10AN7720R7D2

PLA10AN1330R5D2

PLA10AN2230R4D2

PLA10AN3630R3D2

0.9mH

1.3mH

1.8mH

2.0mH

3.6mH

7.7mH

13.0mH

22.0mH

36.0mH

2.0A

1.7A

1.5A

1.3A

1.0A

0.7A

0.5A

0.4A

0.3A

300V

100M ohm

Operating Temperature Range: -25°C to 60°C

Winding Temperature Rise (at Rated Current): 60°C (max.)

Equivalent Circuit

Packaging

Code

Packaging

Magazine

Box

Minimum Quantity

1800

1260

(1)

(4)

(2)

N1 : N2 = 1 : 1

(3)

No polarity.

Continued on the following page.

oThis data sheet is applied for AC Line Filters Common Mode Choke Coil used for General Electronics equipment for your design.

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁcations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁcations because there is no space for detailed speciﬁcations. Therefore, please approve our product

speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

2012.7.5

http://www.murata.com/

Noise Suppression Products/EMI Suppression Filters > AC Line Filters > Common Mode Choke Coil

Data Sheet

Continued from the preceding page.

Caution (Rating)

Notice (Soldering and Mounting)

Magnetic Flux Leakage

c !

1. Rated Current

Operating current should not exceed the rated

value. Even if operating current is under the

rated value, adequate ventilation is required to

avoid excessive heat generated within the product

(choke coil) and from surrounding heat sources.

If exceeding these conditions, excessive heat may

cause fumes or permanent damage to the product.

Please ensure that product (choke coil) is

evaluated and conﬁrmed against the speciﬁcation

when it is mounted in your ﬁnal assembled product.

-> Winding temperature should be less than

120 degree C.

Choke coils generate small amounts of magnetic ﬂux

leakage that may adversely affect equipment operation

according to component arrangement.

Testing should be completed on ﬁnal assembly to

ensure equipment performance is not affected.

*As for FKOB series winding temperature should be

less than 95 degree C.

Maximum allowable temperature at the surface of

coil (ambient temperature + winding temperature

rise) is in accordance with each safety standard

applicable to ﬁnal assembled product.

When the temperature at winding exceeds maximum

allowable temperature of safety standard, the

rated current should be derated.

2. Inrush Current

Inrush current should not exceed 10 times rated

current within 1/4 cycle of 50/60Hz commercial

power line. Inrush current should be limited to a

minimum of 10 seconds after last inrush.

If these conditions are exceeded, excessive heat may

cause fumes or permanent damage to the component,

or at worst cause ignition.

Notice (Other)

Coil Humming Noise

Magnetic ﬂux generated between coil and core or

between the choke coil windings creates repulsive

power between the coil windings. This repulsive

power causes the coil winding to vibrate and create

a humming noise. The amount of hum produced by the

coil is proportionate to the amount of harmonic

distortion generated by the operating current. This

does not inﬂuence the electrical performance of

the coils, but it should be considered and tested

in actual circuit application.

oThis data sheet is applied for AC Line Filters Common Mode Choke Coil used for General Electronics equipment for your design.

!Note:

1. This datasheet is downloaded from the website of Murata Manufacturing co., ltd. Therefore, it’s speciﬁcations are subject to change or our products in it

may be discontinued without advance notice. Please check with our sales representatives or product engineers before ordering.

2. This datasheet has only typical speciﬁcations because there is no space for detailed speciﬁcations. Therefore, please approve our product

speciﬁcations or transact the approval sheet for product speciﬁcations before ordering.

2012.7.5

http://www.murata.com/

相关型号：