PVZ3A205A01B00_技术文档

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

Mu ra ta

Ma nu fa cturin g Co., Ltd .

Cat.No.R50E-13

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

R50E13.pdf 04.6.11

1

2

3

4

5

6

7

8

9

CONTENTS

Part Numbering

2

4

Selection Guide of Trimmer Potentiometers

1

2

3

4

5

6

7

8

9

SMD Open Type 2mm Size PVZ2 Series

PVZ2 Series Notice

5

7

SMD Open Type 3mm Size PVZ3/ PVS3/ PVA3 Series

PVZ3/PVS3/PVA3 Series Notice

9

16

19

21

23

26

28

31

33

39

41

52

54

71

73

75

77

79

82

83

88

SMD Sealed Type 2mm Size PVF2 Series

PVF2 Series Notice

SMD Sealed Type 3mm Size PVG3 Series

PVG3 Series Notice

SMD Sealed Type 4mm Size PVM4 Series

PVM4 Series Notice

SMD Sealed Type Multi-turns PVG5/ PV01 Series

PVG5/PV01 Series Notice

Lead Sealed Type Single-turn PVC6/ PV32/ PV34 Series

PVC6/PV32/PV34 Series Notice

Lead Sealed Type Multi-turns PV12/ PV37/ PV23/ PV22/ PV36 Series

PV12/PV37/PV23/PV22/PV36 Series Notice

Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series

PVS1 Series Notice

SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods

SMD Sealed Type/Lead Sealed Type Specifications and Test Methods

Angle Sensing Potentiometer Specifications and Test Methods

Packaging

Recommended Adjustment Tools/Qualified Standards

• The RoHS compliance means that we judge from EU Directive 2002/95/EC the products do not contain lead, cadmium, mercury, hexavalent

chromium, PBB and PBDE, except exemptions stated in EU Directive 2002/95/EC annex and impurities existing in natural world.

• This statement does not insure the complaince of any of the listed parts with any laws or legal imperatives developed by any EU members

individually with regards to the RoHS Directive.

Recycled Paper

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

o Part Numbering

Trimmer Potentiometers

(Part Number)

PV Z3

A

103 A01 R00

q

w

e

r

t

y

P

Y

W

Y

P

X

Z

Side, Triangle

Top, Inline

Lead Sealed 19mm

Rectangular 15-turns

23

36

qProduct ID

Product ID

PV

Trimmer Potentiometers

Top, Triangle

Side, Triangle

Side, Inline

Lead Sealed 10mm Square

25-turns

wSeries

eAdjustment Direction /Lead Type

Side, Triangle

Top, Triangle

Top, Inline

Adjustment Direction/

Lead Type

Code

Series

Code

W

Y

P

X

Z

A

K

A

K

R

Top

Rear

Top

Lead Sealed 6mm Square

12-turns

Z2

SMD Open 2mm Size

37

Side, Triangle

Side, Inline

Z3

SMD Open 3mm Size

Rear

rTotal Resistance

SMD Open 3mm Size

Stopper Low-profile

Expressed by three figures. The unit is ohm. The first and second

figures are significant digits, and the third figure expresses the

number of zeros which follow the two figures.

S3

A3

A

Top

SMD Open 3mm Size

A

G

K

A

H

P

W

X

A

D

E

G

H

M

Q

H

P

R

N

T

Top

F2 SMD Sealed type 2mm Size

Top

Ex.)

Code

100

Total Resistance

10ohm

Top, J-hook

Top, Gull-wing

Rear

G3

SMD Sealed 3mm Size

SMD Sealed 4mm Size

102

1000ohm

104

100000ohm (=100kohm)

M4

G5

Top

SMD Sealed 5mm Square

11-turns

tIndividual Specification

Side

Code

Series

Individual Specification Code

Side

ꢀ

SMD Sealed 6mm Square

12-turns

PVZ2/PVZ3/PVS3/

PVA3/PV32/PV12

01

Top

A01

Standard Type

Side

PVG3/PVM4/PVG5/PV01/

Top, Triangle

Side, Triangle

Top, Inline

Side, Inline

Top, Triangle

Top, Inline

Side, Triangle

Top, Triangle

Side, Triangle

Side, Inline

Top, Triangle

Side, Triangle

Side

C01 PVC6/PV34/PV22/PV23/

PV36/PV37

Standard Type

A04

C01

E01

D01

C31

C04

PVZ2

PVZ3

Ultra-thin Type

High-heat Resistance Type (for Top Adjustment)

High-heat Resistance Type (for Rear Adjustment)

High-liability Type

Lead Sealed 6mm Square

Single-turn

C6

PVZ3

PVM4

PV36/PV37

PVC6

Radial Taping

Standard Type (Resistance Change

Characteristics : Linear)

A11

A41

A81

A51

A91

PVF2

Lead Sealed 6mm Round

Single-turn

32

34

Standard Type (Resistance Change

Characteristics : Log curve)

Standard Type (Resistance Change

Characteristics : Log curve)

S

F

Standard Type (Resistance Change

Characteristics : Log-log curve)

P

H

X

W

H

P

T

Lead Sealed 9mm Square

Single-turn

Standard Type (Resistance Change

Characteristics : Log-log curve)

yPackaging

Lead Sealed 7mm Round

4-turns

12

22

Code

A00

Packaging

Ammo Pack

Bulk

S

L

B00

Lead Sealed

31mm Rectangular

22-turns

M00*

R00

Magazine

Reel

S

Y

Side, Inline

Side, Triangle

* M12 for PV36P Type and M15 for PV36W/Y/X/Z Type.

2

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Angle Sensing Potentiometers

(Part Number)

PV S1

A

103 A01 R00

q

w

e

r

t

y

qProduct ID

tIndividual Specification Code

Product ID

Code

A01

A03

Individual Specification Code

Trimmer Potentiometers

(Rotary Position Sensor)

SMD Type Standard

Lead Type Standard

PV

wSeries

yPackaging

Code

Series

Code

B00

R00

T00

Packaging

Bulk

S1

Dust-proof Type 12mm Size

Reel

eTerminal Shape

Tray

Code

Terminal Shape

SMD Type

A

L

Lead Type

rTotal Resistance

Expressed by three figures. The unit is ohm. The first and second

figures are significant digits, and the third figure expresses the

number of zeros which follow the two figures.

Ex.)

Code

Total Resistance

103

10000 ohm (=10k ohm)

PVS1 Series will be changed to new part number since Oct. 1, 2004. Details is as follows.

(Part Number)

SV 01

A

103 AE A01 R00

q

w

e

r

t

y

u

qProduct ID

tRotor Hole Shape/Rotor Hole Size

Product ID

Code

AD

Rotor Hole Shape/Rotor Hole Size

D Hole/3.5mm Dia.

SV

Rotary Position Sensor

AE

D Hole/4.0mm Dia.

wSeries

CE

T Hole/4.0mm Dia.

Code

Series

yIndividual Specification Code

01

Carbon Rotary Position Sensor

Code

A01

A03

Individual Specification Code

eTerminal Shape

SMD Type Standard

Lead Type Standard

Code

Terminal Shape

SMD Type

A

L

uPackaging

Lead Type

Code

B00

R00

T00

Packaging

Bulk

rTotal Resistance

Expressed by three figures. The unit is ohm. The first and second

figures are significant digits, and the third figure expresses the

number of zeros which follow the two figures.

Reel

Tray

Ex.)

Code

Total Resistance

103

10000 ohm (=10k ohm)

3

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Selection Guide of Trimmer Potentiometers

Start

Mounting Method

Surface Mount

PCB Insertion

Sealed Construction

Construction

Adjustment

Open

Sealed

Top

Side

Resistive Element

Carbon

Cermet

Carbon

Cermet

Cermet Resistive Element

2mm size Single Turn

3mm size Single Turn

2mm size Single Turn

3mm size Single Turn

6mm size Single Turn

for Automatic Adjustment

with Rotational Stop

for Automatic Adjustment

with Rotational Stop

Low Height

with Rotational Stop

(0.85mm max.)

PVZ2A_A04

(1.0mm max.)

PVZ2A_A01

PVF2

PVS3

PVA3

PVG3A

PVC6A/D/M

PVC6E/G/H/Q

7mm size 4 Turns

with Rotational Stop

Rear Adjustment

PVG3G

PV12H/P

PV12T/S

PVZ2K

6mm size 12 Turns

Rear Adjustment

with Rotational Stop

3mm size Single Turn

for Automatic Adjustment

PVG3K

PV37W/Y

PV37P/X/Z

PVZ3A

Rear Adjustment

4mm size Single Turn

10mm size 25 Turns

PVZ3K

Rear Adjustment

Low profile (1.5mm max.)

PVM4

PV36W/Y

PV36P/X/Z

5mm size 11 Turns

19mm size 15 Turns

PVZ3R

PVG5

PV23P/Y

4

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

1

Trimmer Potentiometers

SMD Open Type 2mm Size PVZ2 Series

2.1

0.8

#2

2

0.5

0.4

■ Features

Soldering Part

2.4 Dia.

1

1. Ultra-small and thin external dimensions of

2.1(W)x2.7(L)x0.85 max. (T)mm.

(PVZ2A_A04 Series)

2. Au plated termination achieves a high density

P.C.B. mounting.

#1

#3

#2

0.7

0.55

3. Cross-shaped driver slot allows for in-process

automatic adjustment and it provides superior

adjustability.

#1

#3

CLOCKWISE

1

2

Driver Plate Rotation Area :

Please do not place any components

more than 0.7mm in height within this area.

PVZ2A_A01 : 0.9±0.1

PVZ2A_A04 : 0.8±0.05

PVZ2A

in mm

4. Two-piece parts construction achieves low cost and

excellent quality.

(

)

Tolerance : ±0.2

5. Special resin substrate allows high peak temperature

for reflow soldering.

2.1

0.8

+0.1

0.9

-

0.2

#2

2.4 Dia.

*1

■ Applications

1. Pick-up module

3. Cellular-phone

5. Pager

2. LCD

4. PHS

6. DVC

7. Digital camera

8. Portable audio, etc.

Soldering

Part

#1

#3

#2

0.65 0.6 0.65

#1

CLOCKWISE

#3

1. Driver Plate Rotation Area :

Please do not place any components

more than 0.7mm in height within this area.

PVZ2K

in mm

(

)

Tolerance : ±0.2

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVZ2p501A01

PVZ2p102A01

PVZ2p202A01

PVZ2p302A01

PVZ2p502A01

PVZ2p103A01

PVZ2p203A01

PVZ2p303A01

PVZ2p503A01

PVZ2p104A01

PVZ2p204A01

PVZ2p304A01

PVZ2p504A01

PVZ2p105A01

PVZ2p501A04

PVZ2p102A04

PVZ2p202A04

PVZ2p302A04

PVZ2p502A04

PVZ2p103A04

PVZ2p203A04

PVZ2p303A04

PVZ2p503A04

PVZ2p104A04

PVZ2p204A04

0.1W(50°C)

Reflow/Soldering Iron

1(240°±10°)

500ohm ±30%

1k ohm ±30%

2k ohm ±30%

3k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

30k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

300k ohm ±30%

500k ohm ±30%

1M ohm ±30%

500ohm ±30%

1k ohm ±30%

2k ohm ±30%

3k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

30k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

±500ppm/°C

Continued on the following page.

5

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

1

PVZ2p304A04

PVZ2p504A04

PVZ2p105A04

0.1W(50°C)

Reflow/Soldering Iron

1(240°±10°)

300k ohm ±30%

500k ohm ±30%

1M ohm ±30%

±500ppm/°C

The blank column is filled with the code of adjustment direction A (top) or K (rear).

■ Construction

■ Standard Land Pattern

PVZ2A

0.9

0.6

0.7

0.6

in mm

Tolerance : ±0.1

(

)

■ Construction

PVZ2K

■ Standard Land Pattern

PVZ2K

0.9

#2-Terminal

Driver Plate

3.4 Dia.

#1-Terminal

Wiper

Resistive

Element

0.7 0.6 0.7

Resin Substrate

#3-Terminal

in mm

Tolerance : ±0.1

(

)

■ Characteristics

Humidity Exposure

High Temperature

Exposure

Res. Change : +10, -2%

<

Res. Change : R 50kohm···+2, -10%

=

50kohm<R···+2, -15%

Humidity Load Life

Res. Change : ±10%

<

Res. Change : R 50kohm···+2, -10%

=

Load Life

50kohm<R···+2, -15%

Temperature Cycle

Temperature Coefficient

of Resistance

Res. Change : ±5%

±500ppm/˚C

Rotational Life

Res. Change : ±10% (10 cycles)

6

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVZ2 Series Notice

1

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

4. If the trimmer potentiometer is used in DC and high

humidity conditions, please connect wiper (#2) for

plus and resistive element (#1 or #3) for minus.

■ Notice (Soldering and Mounting)

1. Soldering

The thickness of solder paste should be printed

from 100 micro m to 150 micro m and the

dimension of land pattern used should be Murata's

standard land pattern at reflow soldering.

Insufficient amounts of solder can lead to

insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

(1) Reflow soldering and Soldering Iron are

available. Cannot be soldered using the flow

soldering method. If you use the flow soldering

method, the trimmer potentiometer may not

function.

(2) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(5) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

(3) Standard soldering condition

(a) Reflow soldering :

2. Mounting

Refer to the standard temperature profile.

(b) Soldering iron:

(1) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(2) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(3) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 1.5-1.8mm dia. and inner dimension

1.3mm dia.

>Temperature of tip 360 deg. C max.

>Soldering time

>Diameter

3 sec. max.

1mm max.

>Wattage of iron 30W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature, the

trimmer potentiometer may deviate from the

specified characteristics.

3. Cleaning

(1) In case there is flux on the resistive element,

clean sufficiently with cleaning solvents and

completely remove all residual flux.

(2) Isopropyl-alcohol and Ethyl-alcohol are

Continued on the following page.

(4) Apply the appropriate amount of solder paste.

7

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVZ2 Series Notice

1

Continued from the preceding page.

applicable solvents for cleaning. If you use any

other types of solvents, please evaluate

performance by your product.

■ Reflow Soldering Standard Profile

For reflow soldering

Gradual Cooling

(in the air)

Pre-heating (in the air)

Soldering

230

200

100

0

60-120 sec.

30 sec. max.

Time

(Melting zone)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdriver below.

* Recommended screwdriver for manual adjustment

PVZ2A_A01=Murata P/N : KMDR090

3. Please use within the effective rotational angle.

The potentiometer does not have a mechanical stop

for over rotation. In cases out of effective

rotational angle, the trimmer potentiometer may

not function.

PVZ2A_A04=Murata P/N : KMDR150

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

4. When using a lock paint to fix slot position,

please consult with a Murata factory representative

prior to using to prevent corrosion and contact

intermittence.

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

8

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

SMD Open Type 3mm Size PVZ3/PVS3/PVA3 Series

2

PVZ3 Series

3.1

1.0

#2

1.15 Dia.

2.2 Dia.

1.85±0.1

■ Features

0.25±0.1

0.1max.

3.0 Dia.

1. Excellent solderability characteristics are

achieved via special plating techniques on each

termination.

2. Specially designed substrate prevents wicking of

#1

#3

0.75

1.0

0.75

flux onto the top of the part body.

3. Funnel shaped adjustment slot allows for in-process

automatic adjustment.

#2

#1

CLOCKWISE

#3

4. High-heat resistance type is available

(PVZ3A_C01/PVZ3K_E01/PVZ3R_E01).

5. Enlarged bottom termination enhance soldering

strength while reducing the necessary land area

required promoting high-density PCB mounting.

6. Flat surface is provided for smooth pick and place

(PVZ3K only).

PVZ3A

PVZ3K

PVZ3R

in mm

)

(

Tolerance : ±0.3

2.1

3.1

#2

1.85±0.1

0.25±0.1

7. The standard position of driver plate is adjusted

at the center normally, but another position is

also available.

#3

#1

Soldering part

1.1

1.15 Dia.

2.2 Dia.

3.0 Dia.

8. This product meets Pb-free.

#2 (Wiper Contact)

#3

#1

CLOCKWISE

■ Applications

CIRCUIT

(

1. Optical pick up

2. Cordless telephones

4. FDD

3. CD players

in mm

Tolerance : ±0.3

0.85 0.9 0.85

)

5. Motor

6. CD-ROMs

7. Car stereos

9. Headphone stereos

8. TFT-LCD TV sets

1.4±0.1 0.5±0.1

3.1

#2

#3

#1

Soldering part

1.15 Dia.

2.2 Dia.

3.0 Dia.

1.1

#2 (Wiper Contact)

#3

#1

CLOCKWISE

CIRCUIT

(

in mm

Tolerance : ±0.3

0.85 0.9 0.85

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

0.1W(50°C)

Soldering Method

Total Resistance Value

TCR

PVZ3A201p

PVZ3A301p

PVZ3A501p

PVZ3A102p

PVZ3A202p

PVZ3A302p

PVZ3A502p

PVZ3A103p

PVZ3A203p

PVZ3A303p

Reflow/Soldering Iron

1(230°±10°)

200ohm ±30%

300ohm ±30%

500ohm ±30%

1k ohm ±30%

2k ohm ±30%

3k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

30k ohm ±30%

±500ppm/°C

0.1W(50°C)

Continued on the following page.

9

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVZ3A503p

0.1W(50°C)

Reflow/Soldering Iron

1(230°±10°)

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

300k ohm ±30%

500k ohm ±30%

1M ohm ±30%

2M ohm ±30%

200ohm ±30%

300ohm ±30%

500ohm ±30%

1k ohm ±30%

2k ohm ±30%

3k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

30k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

300k ohm ±30%

500k ohm ±30%

1M ohm ±30%

2M ohm ±30%

200ohm ±30%

300ohm ±30%

500ohm ±30%

1k ohm ±30%

2k ohm ±30%

3k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

30k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

300k ohm ±30%

500k ohm ±30%

1M ohm ±30%

2M ohm ±30%

±500ppm/°C

PVZ3A104p

PVZ3A204p

PVZ3A304p

PVZ3A504p

PVZ3A105p

2

PVZ3A205p

PVZ3K201E01

PVZ3K301E01

PVZ3K501E01

PVZ3K102E01

PVZ3K202E01

PVZ3K302E01

PVZ3K502E01

PVZ3K103E01

PVZ3K203E01

PVZ3K303E01

PVZ3K503E01

PVZ3K104E01

PVZ3K204E01

PVZ3K304E01

PVZ3K504E01

PVZ3K105E01

PVZ3K205E01

PVZ3R201E01

PVZ3R301E01

PVZ3R501E01

PVZ3R102E01

PVZ3R202E01

PVZ3R302E01

PVZ3R502E01

PVZ3R103E01

PVZ3R203E01

PVZ3R303E01

PVZ3R503E01

PVZ3R104E01

PVZ3R204E01

PVZ3R304E01

PVZ3R504E01

PVZ3R105E01

PVZ3R205E01

The blank column is filled with the code of individual specification A01 (standard type) and C01 (high-heat resistance type).

10

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

■ Construction

■ Standard Land Pattern

PVZ3A

PVZ3K

PVZ3R

PVZ3A

1.1

2

1.0

0.7

1.0

in mm

Tolerance : ±0.1

(

)

■ Construction

■ Standard Land Pattern

PVZ3K

Driver Plate

#2-Terminal

1.5

#1-Terminal

Wiper

0.5

3.0

Resistive Element

(Carbon)

#3-Terminal

in mm

Tolerance : ±0.1

(

)

Resin Substrate

■ Construction

■ Standard Land Pattern

PVZ3R

Driver Plate

#2-Terminal

1.5

#1-Terminal

4.0 Dia.

Wiper

Resistive Element

(Carbon)

1.25

3.0

#3-Terminal

in mm

Tolerance : ±0.1

Resin Substrate

(

)

■ Characteristics

Humidity Exposure

Res. Change : +10, -2%

<

High Temperature

Exposure

Res. Change : R 100kohm···+2, -10%

=

100kohm<R···+2, -15%

Humidity Load Life

Res. Change : ±10%

<

Res. Change : R 100kohm···+2, -10%

=

Load Life

100kohm<R···+2, -15%

Temperature Cycle

Temperature Coefficient

of Resistance

Res. Change : ±5%

±500ppm/˚C

Rotational Life

Res. Change : ±10% (10 cycles)

11

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVS3 Series

Soldering part

3.0

2.3±0.1

1.0

1.5±0.1

1.5

1.2 Dia.

3.0 Dia.

■ Features

1.25

#2

4.1Dia.

1

1. Funnel shaped slot allows for in-process automatic

adjustment and it provides superior adjustability.

2. Easy insertion and operation of adjustment

screwdriver

2

0.3±0.1

3. Low profile of 1.5mm height with stopper

4. Plated termination achieves high resistance to

solder leaching.

#3

#1

1.1

0.7 1.1 0.7

0.85

#2 (Wiper Contact)

1.Driver Plate Rotation Area:

Please do not place any components

more than 0.7mm in height within

this area.

#1

#3

5. Screwdrivers for adjustment are available on the

market.

CLOCKWISE

CIRCUIT

in mm

(

)

Tolerance : ±0.3

■ Applications

1. Camcorders

2. Video disk players

4. Headphone stereos

6. Micro-motors

3. TFT-LCD TV sets

5. Cordless telephones

7. Optical cameras

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

0.1W(70°C)

Soldering Method

Total Resistance Value

TCR

PVS3A101A01

PVS3A201A01

PVS3A301A01

PVS3A501A01

PVS3A102A01

PVS3A202A01

PVS3A302A01

PVS3A502A01

PVS3A103A01

PVS3A203A01

PVS3A303A01

PVS3A503A01

PVS3A104A01

PVS3A204A01

PVS3A304A01

PVS3A504A01

PVS3A105A01

PVS3A205A01

Reflow/Soldering Iron

1(270°±10°)

100ohm ±25%

200ohm ±25%

300ohm ±25%

500ohm ±25%

1k ohm ±25%

2k ohm ±25%

3k ohm ±25%

5k ohm ±25%

10k ohm ±25%

20k ohm ±25%

30k ohm ±25%

50k ohm ±25%

100k ohm ±25%

200k ohm ±25%

300k ohm ±25%

500k ohm ±25%

1M ohm ±25%

2M ohm ±25%

±250ppm/°C

0.1W(70°C)

■ Construction

■ Standard Land Pattern

1.6

Driver Plate

Wiper

Stopper /

#2 Terminal

Stopper

Resistive

Element

#1 Terminal

#3 Terminal

1.1

0.8

1.1

Ceramic

Substrate

in mm

Tolerance : ±0.1

(

)

Continued on the following page.

12

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Characteristics

Humidity Exposure

Res. Change : ±3%

High Temperature

Exposure

Humidity Load Life

Load Life

Res. Change : ±3%

Temperature Cycle

Temperature Coefficient

of Resistance

2

±250ppm/˚C

Rotational Life

Res. Change : ±10% (10 cycles)

13

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVA3 Series

1.85±0.1

3.0

2.4±0.1

#2

2.2 Dia.

1.2 Dia.

3.0 Dia.

0.7

0.3±0.1

■ Features

1. Funnel shaped slot allows for in-process automatic

adjustment and it provides superior adjustability.

2. Easy insertion and operation of adjustment

screwdriver

#1

#3

1.1 0.7

0.7

2

1.5

0.6

3. Plated termination achieves high resistance to

solder leaching.

#2

#1

#3

4. Screwdrivers for adjustment are available on the

market.

CLOCKWISE

in mm

Tolerance : ±0.3

5. Recommended for both reflow and flow soldering

method. (Need cleaning for flow soldering method)

(

)

■ Applications

1. Camcorders

2. Video disk players

4. Headphone stereos

6. Micro-motors

3. TFT-LCD TV sets

5. Cordless telephones

7. Optical cameras

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

0.1W(70°C)

Soldering Method

Total Resistance Value

TCR

PVA3A101A01

PVA3A201A01

PVA3A301A01

PVA3A501A01

PVA3A102A01

PVA3A202A01

PVA3A302A01

PVA3A502A01

PVA3A103A01

PVA3A203A01

PVA3A303A01

PVA3A503A01

PVA3A104A01

PVA3A204A01

PVA3A304A01

PVA3A504A01

PVA3A105A01

PVA3A205A01

Flow/Reflow/Soldering Iron

1(270°±10°)

100ohm ±25%

200ohm ±25%

300ohm ±25%

500ohm ±25%

1k ohm ±25%

2k ohm ±25%

3k ohm ±25%

5k ohm ±25%

10k ohm ±25%

20k ohm ±25%

30k ohm ±25%

50k ohm ±25%

100k ohm ±25%

200k ohm ±25%

300k ohm ±25%

500k ohm ±25%

1M ohm ±25%

2M ohm ±25%

±250ppm/°C

0.1W(70°C)

■ Construction

■ Standard Land Pattern

1.6

1.1

0.8

1.1

in mm

Tolerance : ±0.1

(

)

Continued on the following page.

14

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Characteristics

Humidity Exposure

Res. Change : ±3%

High Temperature

Exposure

Humidity Load Life

Load Life

Res. Change : ±3%

Temperature Cycle

Temperature Coefficient

of Resistance

2

±250ppm/˚C

Rotational Life

Res. Change : ±10% (10 cycles)

15

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVZ3/PVS3/PVA3 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

2

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

4. If the trimmer potentiometer is used in DC and high

humidity conditions, please connect wiper (#2) for

plus and resistive element (#1 or #3) for minus.

(PVZ3 Series only)

■ Notice (Soldering and Mounting)

1. Soldering

If you use the flow soldering method, the

trimmer potentiometer may not function.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

(1) Standard soldering condition

(a) Reflow soldering :

Refer to the standard temperature profile.

(b) Soldering iron:

*PVZ3A_A01 series

potentiometer may be damaged.

>Temperature of tip 260 deg. C max.

(4) Apply the appropriate amount of solder paste.

The thickness of solder paste should be printed

from 150 micro m to 200 micro m (PVZ3 series

should be printed from 100 micro m to 150 micro m)

and the dimension of land pattern used should be

Murata's standard land pattern at reflow

soldering. Insufficient amounts of solder can

lead to insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

>Soldering time

>Diameter

3 sec. max.

2mm max.

30W max.

>Wattage of iron

*PVZ3A_C01, PVZ3K_E01, PVZ3R_E01 series

*PVS3, PVA3 series

>Temperature of tip 360 deg. C max.

>Soldering time

>Diameter

3 sec. max.

2mm max.

30W max.

>Wattage of iron

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

2. Mounting

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(2) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

Continued on the following page.

(2) Flow soldering is available for PVA3 series.

For PVZ3 and PVS3, do not use flow

soldering method (dipping).

16

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVZ3/PVS3/PVA3 Series Notice

Continued from the preceding page.

trimmer potentiometer from breakage.

(4) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 2.5-2.8mm dia. and inner dimension

2mm dia.

clean sufficiently with cleaning solvents and

completely remove all residual flux.

(2) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please evaluate

performance by your product.

2

3. Cleaning

(1) In case there is flux on the resistive element,

■ Flow Soldering Standard Profile

PVA3 Series Only

For flow soldering

Gradual Cooling

(in the air)

Pre-heating (in the air)

Soldering

250

200

100

0

Time

60-120 sec.

5 sec. max.

■ Reflow Soldering Standard Profile

PVA3/PVS3/PVZ3_A01 Series

PVZ3_C01/E01 Series

For reflow soldering

For refllow soldering

Gradual cooling

(in the air)

Gradual Cooling

(in the air)

Pre-heating (in the air)

Soldering

Pre-heating (in the air)

Soldering

260

220

230

200

180

150

100

0

Time

60-120 sec.

30 sec. max.

Time

60-120 sec.

30-40 sec.

(Melting zone)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdriver for manual adjustment

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

VESSEL MFG. : NO.9000+1.7x30

(Murata P/N : KMDR080)

3. For PVZ3 and PVA3 series, please use within the

effective rotational angle.

The potentiometer does not have a mechanical stop

for over rotation. In cases out of effective

rotational angle, the trimmer potentiometer may

not function.

TORAY MFG. : SA-2225

(Murata P/N : KMDR070)

* Recommended screwdriver for automatic

adjustment

4. When using a lock paint to fix slot position,

please consult with a Murata factory representative

prior to using to prevent corrosion and contact

intermittence.

TORAY MFG. : JB-2225

(Murata P/N : KMBT070)

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

17

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVZ3/PVS3/PVA3 Series Notice

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

18

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

SMD Sealed Type 2mm Size PVF2 Series

2.30±0.15

0.50

0.30

■ Features

1. Ultra-compact size of "2x2x2.3mm"

Marking

2.00

#2

1.6dia.

0.50

2. A sealed structure prevents liquids (water,

cleaning liquid, sweat, etc.) from entering.

3. As for the resistance change characteristics, both

a log curve type and linear type are available.

4. A rotation service life of 100 cycles is quaranteed.

5. Can be automatically mounted using a chip placer,

as well as mounted using reflow soldering.

#1 #3

0.30

0.50

0.30±0.15

#2 (Wiper contact)

#3

3

#1

Clockwise

in mm

Tolerance : ±0.10

CIRCUIT

(

)

■ Applications

1. Hearing aids

2. Ultra-compact sensors or the like

3. Applications requiring ultra-compactness, and a

sealed structure

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVF2A501A11

PVF2A102A11

PVF2A202A11

PVF2A502A11

PVF2A103A11

PVF2A203A11

PVF2A503A11

PVF2A104A11

PVF2A204A11

PVF2A504A11

PVF2A105A11

PVF2A102A41

PVF2A202A41

PVF2A502A41

PVF2A103A41

PVF2A203A41

PVF2A503A41

PVF2A104A41

PVF2A204A41

PVF2A504A41

PVF2A102A51

PVF2A202A51

PVF2A502A51

PVF2A103A51

PVF2A203A51

PVF2A503A51

PVF2A104A51

PVF2A204A51

PVF2A504A51

PVF2A102A81

PVF2A202A81

PVF2A502A81

PVF2A103A81

PVF2A203A81

0.001W(50°C)

Reflow/Soldering Iron

1(210°±10°)

500ohm ±30%

1k ohm ±30%

2k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

500k ohm ±30%

1M ohm ±30%

1k ohm ±30%

2k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

500k ohm ±30%

1k ohm ±30%

2k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

500k ohm ±30%

1k ohm ±30%

2k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

±500ppm/°C

Continued on the following page.

19

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVF2A503A81

PVF2A104A81

PVF2A204A81

PVF2A504A81

PVF2A102A91

PVF2A202A91

PVF2A502A91

PVF2A103A91

PVF2A203A91

PVF2A503A91

PVF2A104A91

PVF2A204A91

PVF2A504A91

0.001W(50°C)

Reflow/Soldering Iron

1(210°±10°)

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

500k ohm ±30%

1k ohm ±30%

±500ppm/°C

2k ohm ±30%

5k ohm ±30%

10k ohm ±30%

20k ohm ±30%

50k ohm ±30%

100k ohm ±30%

200k ohm ±30%

500k ohm ±30%

3

The last three digits express the individual specification codes for Resistant Curve. Please refer to Resistance Curve on the following page for characteristics.

■ Construction

■ Standard Land Pattern

Shaft

0.60

O-ring

Rotor

Case

0.60

0.40

Terminal

Wiper

Substrate

in mm

Tolerance : ±0.10

(

)

Resistive Element

■ Characteristics

Temperature Cycle

∆TR ±5%

Humidity

∆TR ±15, -2%

∆V.S.S. ±5%

∆TR +2, -10%

∆TR ±3%

Vibration

Shock (100G)

Temperature Load Life

Low Temperature Exposure

Rotational Life (100 cycles)

∆TR: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

∆TR ±10%

■ Resistance Curve

Linear-log. curve (Measured from terminal 1 to 2)

Linear-log. log. curve (Measured from terminal 2 to 3)

100

90

80

70

60

50

40

30

20

10

0

100

90

80

A11

A81

A41

A11

70

A91

60

50

A51

40

30

20

10

0

#1

20

40

60

80

100

#3

0

#1

20

40

60

80

100

#3

Percent clockwise rotation

20

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVF2 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

3

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

4. If the trimmer potentiometer is used in DC and high

humidity conditions, please connect wiper (#2) for

plus and resistive element (#1 or #3) for minus.

■ Notice (Soldering and Mounting)

1. Soldering

the trimmer potentiometer may not function.

2. Mounting

(1) Standard solder iron condition

(a) Reflow soldering:

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of

the surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

Refer to the standard temperature profile.

(b) Sodering iron:

>Temperature of tip 260 deg. C max.

>Soldering time

>Diameter

3 sec. max.

1mm dia. max.

30W max.

(2) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

3. Cleaning

>Wattage of iron

Before using other soldering conditions than

those listed above, please consult with a Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

(2) Use our standard land dimension. Excessive land

area causes displacement due to the effect of

the surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

>Power: 600W (67 liter) max.

>Frequency: 28kHz

potentiometer may be damaged.

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

Continued on the following page.

(4) Cannot be soldered using the flow soldering

method. If you use the flow soldering method,

21

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVF2 Series Notice

Continued from the preceding page.

cleaning compatibility usually depends on the

jig construction and/or the cleaning condition

such as the depth of immersion, please check

the cleaning equipment to determine the suitable

conditions.

If the trimmer potentiometer is cleaned by

other conditions, the trimmer potentiometer may

be damaged.

■ Reflow Soldering Standard Profile

For reflow soldering

Gradual Cooling

(in the air)

Pre-heating (in the air)

Soldering

230

200

3

100

0

60-120 sec.

30 sec. max.

Time

(Melting zone)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot.

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

3. The rotational torque at the position of the

adjustment range should not exceed the stop

strength.

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

22

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

SMD Sealed Type 3mm Size PVG3 Series

3.6

2.0

0.45

0.4 Depth

■ Features

#2

1. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

2. Driver plate with cross-slot is suitable for

automatic adjustment.

0.1 Min.

0.6

#3

#1

2.3

1.00±0.15

3. Rotor with large diameter and deep groove improves

driver insertion.

#2

4. J-hook, Gull wing terminal shape. Rear and through

hole terminal shape.

#1

#3

PVG3A

PVG3G

PVG3K

CLOCKWISE

0.75±0.15

5. 3mm and 4mm land pattern can be used without change.

(Gull wing is suitable for 4mm size land pattern.)

6. Heat resistance performance enables high

temperature peak re-flow soldering.

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

in mm

Tolerance : ±0.3

(

)

3.6

2.0

0.45

4

0.4 Depth

#2

0.1 Min.

#3

#1

2.3

■ Applications

1.00±0.15

1. Small sensors

2. Optical Transceiver Module

4. Printer

3. Copier

#2

5. Compact Power Supply 6. Wireless Radio module

#1

#3

CLOCKWISE

(

0.75±0.15

in mm

Tolerance : ±0.3

)

3.6

1.1

(2.5)

2.0

#2

#3

#1

0.8±0.2

0.5

0.55 Depth

0.5

2.3

#2

#1

#3

CLOCKWISE

in mm

Tolerance : ±0.3

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVG3p100C01

PVG3p200C01

PVG3p500C01

PVG3p101C01

PVG3p201C01

PVG3p501C01

PVG3p102C01

PVG3p202C01

PVG3p502C01

PVG3p103C01

PVG3p203C01

PVG3p503C01

0.25W(70°C)

Reflow/Soldering Iron

1(210°±10°)

1(210°±10)

1(210°±10°)

10ohm ±20%

20ohm ±20%

50ohm ±20%

100ohm ±20%

200ohm ±20%

500ohm ±20%

1k ohm ±20%

2k ohm ±20%

5k ohm ±20%

10k ohm ±20%

20k ohm ±20%

50k ohm ±20%

±150ppm/°C

Continued on the following page.

23

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVG3p104C01

PVG3p204C01

PVG3p504C01

PVG3p105C01

PVG3p205C01

0.25W(70°C)

Reflow/Soldering Iron

1(210°±10°)

100k ohm ±20%

200k ohm ±20%

500k ohm ±20%

1M ohm ±20%

2M ohm ±20%

±150ppm/°C

The blank column is filled with the code of adjustment direction and lead type A (top, J-hook), G (top, gull-wing), or K (rear).

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PVG3p100A01

PVG3p200A01

PVG3p500A01

PVG3p101A01

PVG3p201A01

PVG3p501A01

PVG3p102A01

PVG3p202A01

PVG3p502A01

PVG3p103A01

PVG3p203A01

PVG3p503A01

PVG3p104A01

PVG3p204A01

PVG3p504A01

PVG3p105A01

PVG3p205A01

0.25(70°C)

Reflow/Soldering Iron

1(210°±10°)

10 ohm±20%

20 ohm±20%

50 ohm±20%

100 ohm±20%

200 ohm±20%

500 ohm±20%

1k ohm±20%

2k ohm±20%

5k ohm±20%

10k ohm±20%

20k ohm±20%

50k ohm±20%

100k ohm±20%

200k ohm±20%

500k ohm±20%

1M ohm±20%

2M ohm±20%

±250

±100

Non Standard

Product

4

(Cd included)

■ Construction

PVG3A/PVG3G

PVG3K

Rotor

Cover

Rotor

2

#2-Terminal

Cover

#2-Terminal

2

Case

M

Case

M

#3-Terminal

Wiper

Resistive

Element

Resistive

Element

Wiper

Ceramic

Substrate

Ceramic

Substrate

#1-Terminal

O-Ring

#1-Terminal

■ Standard Land Pattern

PVG3A

PVG3G

1.4

1.1

1.2

1.1

1.2

1.1

in mm

Tolerance : ±0.1

in mm

Tolerance : ±0.1

(

)

(

)

Continued on the following page.

24

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Standard Land Pattern

PVG3K

1.5

3.2 dia.

1.2

1.1

1.2

in mm

Tolerance : ±0.1

(

)

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S ±1%

∆TR ±2%

∆V.S.S ±1%

Humidity

4

IR

10Mohm min.

∆TR

±1%

Vibration (20G)

∆V.S.S ±1%

∆TR ±1%

∆V.S.S ±1%

Shock (100G)

∆TR

±3% or 3ohm max., whichever is greater

Temperature Load Life

∆V.S.S ±1%

∆TR

∆V.S.S ±2%

∆TR ±3%

∆V.S.S ±2%

∆TR RV100ohm ±3% or 2ohm max., whichever is greater

...

±2%

Low Temperature Exposure

High Temperature Exposure

Rotational Life (50cycles)

...

RG100kohm +0/-10%

∆TR

: Total Resistance Change

∆V.S.S : Voltage Setting Stability

IR

R

: Insulation ResistanceR

: Standard Total Resistance

25

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVG3 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

4

■ Notice (Soldering and Mounting)

1. Soldering

2. Mounting

(1) Standard soldering condition

(a) Reflow soldering :

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

Refer to the standard temperature profile.

(b) Soldering iron

Temperature of tip : 400 deg. C max.

Soldering time

Diameter of tip

Wattage of iron

: 3 sec. max.

: 2mm dia. max.

: 30W max.

(2) Do not apply excessive force (preferably 4.9N

(Ref.; 500gf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(4) In chip placers, the size of the cylindrical

pick-up nozzle should be outer dimension

2.5-3.0mm dia. and inner dimension

2.0-2.5mm dia..

Before using other soldering conditions more

than those listed above, please consult with a

Murata factory representative prior to using.

If the soldering conditions are not

suitable, e.g., excessive time and/or excessive

temperature, the trimmer potentiometer may

deviate from the specified characteristics.

(2) Cannot be soldered using the flow soldering

method. If you use the flow soldering method,

the trimmer potentiometer may not function.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) Less than 3 minutes of total cleaning time by

dipping, vapor and ultra-sonic method.

(3) In case of ultra-sonic cleaning method, cleaning

conditions should be as follows.

potentiometer may be damaged.

(4) Apply the appropriate amount of solder paste.

If the amount of solder paste applied to the

land is insufficient, the required adhesive

strength cannot be obtained. If an excessive

amount of solder paste is applied, solder

bridging or flux overflow to the resistive

element surface can occur.

(a) Power: 600W (67lit.) max.

(b) Frequency: 28kHz

(c) Temperature: Ambient temperature

Due to ultra-sonic cleaning equipment's peculiar

self-resonance point and that cleaning

compatibility usually depends on the jig

Continued on the following page.

26

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVG3 Series Notice

Continued from the preceding page.

construction and/or the cleaning condition such

as the depth of immersion, please check the

cleaning equipment to determine the suitable

conditions. If the condition is not suitable,

the trimmer potentiometer may deviate from

specified characteristics.

■ Reflow Soldering Standard Profile

Gradual cooling

in air

Pre-heating in air

Soldering

260

230

200

150

100

0

60-120 sec.

40 sec. max.

Time

(Melting zone)

4

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence.

driver slot.

* Recommended screwdriver for manual adjustment

TORAY INDUSTRIES, INC. : SA-2225

(Murata P/N : KMDR070)

3. When adjusting with an adjustment tool, the applied

force to the adjustment screw should not exceed

4.9N (Ref.; 500gf). If excessive force is applied,

the trimmer potentiometer may not function due to

damage.

* Recommended screwdriver bit for automatic

adjustment

TORAY INDUSTRIES, INC. : JB-2225

(Mutata P/N : KMBT070)

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

We can supply the screwdrivers above.

If you place order, please specify the Murata P/N.

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

27

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

SMD Sealed Type 4mm Size PVM4 Series

2.0±0.2

4.0

#2

1.5 Dia.

3.8 Dia.

0.7

■ Features

1. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

2. Available for flow and reflow soldering method

while maintaining unique sealed construction.

3. Simple construction by 3-piece parts achieves high

reliability.

#1

#3

0.55±0.1

0.35±0.1 Depth

0.75

1.7

0.6

#2

#1

#3

4. Large diameter slot of rotor improves driver

insertion.

CLOCKWISE

5. Available for cleaning after soldering

6. High grade version is available (PVM4AxxxD01).

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

in mm

Tolerance : ±0.3

1.8

0.85

(

)

■ Applications

1. Security

2. OA, FA equipments

3. Measuring equipments 4. Professional cameras

5. Encorders

6. Sensors

5

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVM4A101C01

PVM4A201C01

PVM4A301C01

PVM4A501C01

PVM4A102C01

PVM4A202C01

PVM4A302C01

PVM4A502C01

PVM4A103C01

PVM4A203C01

PVM4A303C01

PVM4A503C01

PVM4A104C01

PVM4A204C01

PVM4A304C01

PVM4A504C01

PVM4A105C01

PVM4A205C01

PVM4A101D01

PVM4A201D01

PVM4A301D01

PVM4A501D01

PVM4A102D01

PVM4A202D01

PVM4A302D01

PVM4A502D01

PVM4A103D01

PVM4A203D01

PVM4A303D01

PVM4A503D01

0.1W(70°C)

Flow/Reflow/Soldering Iron

1(240°±10°)

100ohm ±25%

200ohm ±25%

300ohm ±25%

500ohm ±25%

1k ohm ±25%

2k ohm ±25%

3k ohm ±25%

5k ohm ±25%

10k ohm ±25%

20k ohm ±25%

30k ohm ±25%

50k ohm ±25%

100k ohm ±25%

200k ohm ±25%

300k ohm ±25%

500k ohm ±25%

1M ohm ±25%

2M ohm ±25%

100ohm ±20%

200ohm ±20%

300ohm ±20%

500ohm ±20%

1k ohm ±20%

2k ohm ±20%

3k ohm ±20%

5k ohm ±20%

10k ohm ±20%

20k ohm ±20%

30k ohm ±20%

50k ohm ±20%

±250ppm/°C

±100ppm/°C

±200ppm/°C

±150ppm/°C

0.25W(70°C) Flow/Reflow/Soldering Iron

Continued on the following page.

28

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVM4A104D01

PVM4A204D01

PVM4A304D01

PVM4A504D01

PVM4A105D01

PVM4A205D01

0.25W(70°C) Flow/Reflow/Soldering Iron

1(240°±10°)

100k ohm ±20%

200k ohm ±20%

300k ohm ±20%

500k ohm ±20%

1M ohm ±20%

2M ohm ±20%

±150ppm/°C

The last three digits express the individual specification codes. C01 for standard type and D01 for high-liability type.

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PVM4A101A01

PVM4A201A01

PVM4A301A01

PVM4A501A01

PVM4A102A01

PVM4A202A01

PVM4A302A01

PVM4A502A01

PVM4A103A01

PVM4A203A01

PVM4A303A01

PVM4A503A01

PVM4A104A01

PVM4A204A01

PVM4A304A01

PVM4A504A01

PVM4A105A01

PVM4A205A01

PVM4A101B01

PVM4A201B01

PVM4A301B01

PVM4A501B01

PVM4A102B01

PVM4A202B01

PVM4A302B01

PVM4A502B01

PVM4A103B01

PVM4A203B01

PVM4A303B01

PVM4A503B01

PVM4A104B01

PVM4A204B01

PVM4A304B01

PVM4A504B01

PVM4A105B01

PVM4A205B01

0.1(70°C)

0.25(70°C)

Flow/Reflow/Soldering Iron

1(240°±10°)

100 ohm±25%

200 ohm±25%

300 ohm±25%

500 ohm±25%

1k ohm±25%

2k ohm±25%

3k ohm±25%

5k ohm±25%

10k ohm±25%

20k ohm±25%

30k ohm±25%

50k ohm±25%

100k ohm±25%

200k ohm±25%

300k ohm±25%

500k ohm±25%

1M ohm±25%

2M ohm±25%

100 ohm±20%

200 ohm±20%

300 ohm±20%

500 ohm±20%

1k ohm±20%

2k ohm±20%

3k ohm±20%

5k ohm±20%

10k ohm±20%

20k ohm±20%

30k ohm±20%

50k ohm±20%

100k ohm±20%

200k ohm±20%

300k ohm±20%

500k ohm±20%

1M ohm±20%

2M ohm±20%

±250

±150

±100

±150

Non Standard

Product

(Cd Free)

Non Standard

Product

(Cd included)

5

Non Standard

Product

(Cd Free)

Non Standard

Product

(Cd included)

Continued on the following page.

29

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Construction

■ Standard Land Pattern

1.7

Rotor

#2 Terminal

Wiper

Rubber

Ceramic

Substrate

#1 Terminal

Resistive

Element

in mm

Tolerance : ±0.1

1.1

1.6

1.1

(

)

#3 Terminal

■ Characteristics

Item

PVM4ApppC01

Res. Change : ±3%

PVM4ApppD01

Res. Change : ±2%

Res. Change : ±3%

Res. Change : ±2%

Humidity Exposure

High Temperature Exposure

Humidity Load Life

Temperature Load Life

Temperature Cycle

Rotational Life

Res. Change : ±3%

Res. Change : ±10% (20 cycles)

Res. Change : ±5% (100 cycles)

5

30

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVM4 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

5

■ Notice (Soldering and Mounting)

1. Soldering

Insufficient amounts of solder can lead to

insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

(1) Can be soldered by reflow soldering method, flow

soldering method, and soldering iron. (In case

of flow soldering, it is necessary to clean

after soldering.)

(5) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

(2) Use our standard land dimension. Excessive land

area causes displacement due to the effect of

the surface tension of the solder. Insufficient

land area leads to insufficient soldering

strength of the chip.

2. Mounting

(1) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

(2) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(3) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 4.0mm dia. and inner dimension 2.0mm

dia.

(3) Standard soldering condition

(a) Reflow and flow soldering :

Refer to the standard temperature profile.

(b) Soldering iron:

>Temperature of tip 400 deg.C max.

>Soldering time

>Diameter

5 sec. max.

2mm dia. max.

40W max.

>Wattage of iron

Before using other soldering conditions than

those listed above, please consult with a Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

3. Cleaning

(1) Isopropyl alcohol and Ethyl alcohol are

available materials for cleaning.

For other materials, please consult with a Murata

factory representative prior to using.

(2) The following are the recommended cleaning

conditions for the potentiometer. If this part

is cleanied under any other conditions than

these listed below, the sealing construction may

be damaged.

(4) Apply the appropriate amount of solder paste.

The thickness of solder paste should be printed

from 100 micro m to 150 micro m and the

dimension of land pattern used should be Murata's

standard land pattern at reflow soldering.

(Condition)

Type1: Cold dipping/Max. 5 min.

Continued on the following page.

31

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVM4 Series Notice

Continued from the preceding page.

Type2: Hot dipping/Max. 2 min.

Type3: Ultra-sonic washing/Max. 1 min.

(20W/litre or below)

Due to ultra-sonic cleaning equipment's peculiar

self-resonance point and that cleaning compatibility

usually depends on the jig construction and/or the

cleaning condition such as the depth of immersion,

please check the cleaning equipment to determine

the suitable conditions.

Type4: Hot dipping/Max. 1 min.+

Ultra-sonic washing/Max.1 min.

(20W/litre or below)

Type5: Hot dipping/Max. 1 min.+

Ultra-sonic washing/Max. 30 sec.+

(20W/litre or below)/(Preferably max. 30 sec.)

Vapor/Max.30 sec.

If the condition is not suitable, the trimmer

potentiometer may deviate from specified

characteristics.

■ Flow Soldering Standard Profile

■ Reflow Soldering Standard Profile

Gradual Cooling

(in the air)

Gradual Cooling

(in the air)

Pre-heating(in the air)

Soldering

Pre-heating(in the air)

Soldering

260

200

180

200

150

100

150

100

0

Time

60 to 120 sec.

10 sec. max.

60 to 120 sec.

30 to 50 sec.

Time

5

150 to 180°C

(Melting zone)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

applied, the trimmer potentiometer may not

function.

driver slot. We recommend the screwdriver below.

* Recommended screwdriver for manual adjustment

VESSEL MFG.: NO. 9000-2.6x30

3. Please use within the effective rotational angle.

The potentiometer does not have a mechanical stop

for over rotation. In cases out of effective

rotational angle, the trimmer potentiometer may

not function.

(Murata P/N : KMDR120)

We can supply the screwdrivers above.

If you place order, please specify the Murata P/N.

2. Don't apply more than 4.9N (Ref.; 500gf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

32

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

SMD Sealed Type Multi-turns PVG5/PV01 Series

PVG5 Series

■ Features

ADJ. Slot

DIA 1.5

Width 0.6

Depth 0.5

1. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

2. Available with reflow soldering method

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. Both Top and side adjustment directions

6. Ultra smaller volume (1/5-1/2) than leaded multi-turn

5.0

0.2

3-0.7

#1

2.4

1.2

3-0.8

#2

#3

2.5

Schematic

#2

potentiometer.

PVG5A

#1

#3

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

CLOCKWISE

in mm

Tolerance : ±0.3

(

)

ADJ.Slot

■ Applications

1. Measuring instruments 2. OA equipment

DIA 1.5

Width 0.6

Depth 0.5

2.4

4.9

1.2

3. Madical equipment

5. Sensors

4. Power supply

6. Base station for cellular phone

3-0.7

3-0.9

#3

Schematic

#2

#1

PVG5H

#1

#3

CLOCKWISE

in mm

Tolerance : ±0.3

(

)

6

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVG5p100C01

PVG5p200C01

PVG5p500C01

PVG5p101C01

PVG5p201C01

PVG5p501C01

PVG5p102C01

PVG5p202C01

PVG5p502C01

PVG5p103C01

PVG5p203C01

PVG5p503C01

PVG5p104C01

PVG5p204C01

PVG5p504C01

PVG5p105C01

PVG5p205C01

0.25W(70°C)

Reflow/Soldering Iron

11

10ohm ±10%

20ohm ±10%

±150ppm/°C

50ohm ±10%

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

The blank column is filled with the code of adjustment direction A (top) or H (side).

33

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PVG5p100A01

PVG5p200A01

PVG5p500A01

PVG5p101A01

PVG5p201A01

PVG5p501A01

PVG5p102A01

PVG5p202A01

PVG5p502A01

PVG5p103A01

PVG5p203A01

PVG5p503A01

PVG5p104A01

PVG5p204A01

PVG5p504A01

PVG5p105A01

PVG5p205A01

0.25(70°C)

Reflow/Soldering Iron

11

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±200

±100

Non Standard

Product

(Cd included)

■ Construction

Adjustment Screw

Case

Gear

#2 Terminal

Wiper

Resistive Element

Ceramic Substrate

#1, #3 Terminal

6

■ Standard Land Pattern

PVG5A

1.3

PVG5H

1.3

1.2

1.3

1.0

1.3

in mm

Tolerance : ±0.1

in mm

)

(

)

(

Tolerance : ±0.1

Continued on the following page.

34

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

10Mohm min.

±1%

∆TR

Vibration

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3% or 3ohm max.,

whichever is greater

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±3% or 3ohm max.,

Shock

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (100 cycles)

whichever is greater

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

6

35

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV01 Series

6.4

1.2

■ Features

1. Small size (6.35x6.35x4.3mm)

1.8±0.2 DIA

0.6±0.2

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available with reflow soldering method

4. Available for ultrasonic cleaning after soldering

5. Clutch mechanism prevents excessive wiper rotation.

6. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

#2

3−0.4±0.1 Dia.

#3

#1

2.5

#2

PV01P

PV01W

PV01X

#1

#3

in mm

Tolerance : ±0.3

Clockwise

(

)

■ Applications

1. Measuring instruments 2. FAX

6.4

1.2

#2

3. PPCs

4. Printers

5. Sensors

3−0.4±0.1 Dia.

#1

2.5

#3

2.5

1.8±0.2 Dia.

0.6±0.2

3−1.0

#2

#1

#3

in mm

Tolerance : ±0.3

(

)

Clockwise

6.4

#2

3−0.4±0.1 Dia.

#3

2.5

#1

2.5

1.1

6

0.6

1.0

3−1.0

#2

#1

#3

in mm

Tolerance : ±0.3

Clockwise

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV01p100C01

PV01p200C01

PV01p500C01

PV01p101C01

PV01p201C01

PV01p501C01

PV01p102C01

PV01p202C01

PV01p502C01

PV01p103C01

PV01p203C01

PV01p253C01

PV01p503C01

PV01p104C01

PV01p204C01

PV01p254C01

0.25W(85°C)

Reflow/Soldering Iron

12

10ohm ±10%

20ohm ±10%

±150ppm/°C

50ohm ±10%

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

Continued on the following page.

36

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV01p504C01

PV01p105C01

0.25W(85°C)

Reflow/Soldering Iron

12

500k ohm ±10%

1M ohm ±10%

±150ppm/°C

The blank column is filled with the code of adjustment direction P (side), W (top) or X (side).

Magazine packaging is standard for PV01 series.

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PV01p100A01

PV01p200A01

PV01p500A01

PV01p101A01

PV01p201A01

PV01p501A01

PV01p102A01

PV01p202A01

PV01p502A01

PV01p103A01

PV01p203A01

PV01p253A01

PV01p503A01

PV01p104A01

PV01p204A01

PV01p254A01

PV01p504A01

PV01p105A01

0.25(85°C)

Refrow/Soldering Iron

12

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Gear

Case

6

Terminal

Adjustment Screw

Wiper

Cermet Resistive

Element

Alumina Substrate

■ Standard Land Pattern

PV01P

PV01W/PV01X

1.6

3.4

1.6

3.4

1.6

in mm

)

in mm

Tolerance : ±0.1

(

)

Tolerance : ±0.1

Continued on the following page.

37

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Characteristics

∆TR

±1%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

±1%

∆TR

Vibration (20G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR RV100ohm ±3%

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

...

RG100ohm ±2%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR

R

: Insulation Resistance

: Standard Total Resistance

6

38

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVG5/PV01 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

surface tension of the solder. Insufficient land

area leads to insufficient soldering strength of

the chip.

(1) Standard soldering condition

(a) Reflow and flow soldering:

Refer to the standard temperature profile.

(b) Soldering iron:

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

(3) Do not warp and/or bend PC board to prevent

trimmer potentiometer from breakage.

(4) In chip placers, the recommended size of the

cylindrical pick-up nozzle should be outer

dimension 4.0mm dia. and inner dimension 2.0mm

dia.

6

>Temperature of tip 260 deg.C max.

>Soldering time

>Diameter

3 sec. max.

2mm dia. max.

30W max.

>Wattage of iron

Before using other soldering conditions than

those listed above, please consult with a Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer capacitor may deviate from the

specified characteristics.

3. Cleaning

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

(2) Cannot be soldered using the flow soldering

method. If you use the flow soldering method,

the trimmer potentiometer may not function.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

>Power: 600W (67 liter) max.

(4) Insufficient amounts of solder can lead to

insufficient soldering strength on PCB.

Excessive amounts of solder may cause bridging

between the terminals.

>Frequency: 28kHz

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

cleaning compatibility usually depends on the jig

construction and/or the cleaning condition such

as the depth of immersion, please check the

Continued on the following page.

2. Mounting

(1) Use our standard land dimension. Excessive land

area causes displacement due to the effect of the

39

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVG5/PV01 Series Notice

Continued from the preceding page.

cleaning equipment to determine the suitable

conditions.

conditions, the trimmer potentiometer may be

damaged.

If the trimmer potentiometer is cleaned by other

■ Reflow Soldering Standard Profile

For reflow soldering

Gradual Cooling

(in the air)

Pre-heating (in the air)

Soldering

230

200

100

0

60-120 sec.

30 sec. max.

Time

(Melting zone)

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdrivers for manual adjustment

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

VESSEL MFG. : NO.9000-1.3x30

(Murata P/N : KMDR130)

3. When adjusting with a screwdriver, do not apply

excessive force (preferable 4.9N (Ref; 500gf) max.)

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

ENGINEER INC. : DA-40

(Murata P/N : KMDR180)

We can supply the screwdrivers above.

If you place order, please specify Murata P/N.

6

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

40

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

Lead Sealed Type Single-turn PVC6/PV32/PV34 Series

PVC6 Series

6.9

0.55W×3.2L×1.3D

■ Features

1. Enlarged and colored rotor provides superior

adjustability.

3.2 Dia.

2. Cone-shaped rotor improves driver insertion during

automatic adjustment.

3-0.5 Dia.

3. Available for "Zero" plus adjustment tool (taper

head) use

#3

2.5

#2

4. Easy to see 11-scales adjustment positions.

#2

#1

#3

5. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

6. Available for ultrasonic cleaning after soldering

7. During cutting process by the inserter machine, the

round shaped lead wire prevents clinch problems

and realizes longer life of cutter than flat shaped

lead wire.

PVC6A

PVC6D

PVC6E

PVC6H

CLOCKWISE

in mm

Tolerance : ±0.3

#1

(

)

6.9

0.55W×3.2L×1.3D

8. Flammability: UL94V-0

3.2 Dia.

9. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

3-0.5 Dia.

#3

#1

2.5

#2

■ Applications

#2

#1

CLOCKWISE

#3

1. DY

2. CRT display

4. Professional cameras

6. FAX

in mm

Tolerance : ±0.3

3. Power supply

5. CATV

(

)

7. Printers

9. Sensors

8. OA Equipment

0.55W×3.2L×1.3D

6.9

6.5

3.2 Dia.

7

3-0.5 Dia.

#1 #2 #3

2.5

6.0

#2

#1

CLOCKWISE

#3

in mm

Tolerance : ±0.3

(

)

0.55W×3.2L×1.3D

6.9

6.5

0.55W×3.2L×1.3D

3.2 Dia.

3-0.5 Dia.

#1 #2 #3

2.5

#3

2.5

6.0

#2

#1

#3

#1

CLOCKWISE

#3

CLOCKWISE

PVC6M

in mm

Tolerance : ±0.3

in mm

Tolerance : ±0.3

#1

(

)

(

)

Continued on the following page.

41

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

0.55W×3.2L×1.3D

6.9

0.55W×3.2L×1.3D

6.5

6.9

6.5

3.2 Dia.

3-0.5 Dia.

#1 #2 #3

#3 #2 #1

2.5

6.0

#3

6.0

#2

2.5

#2

#1

CLOCKWISE

#3

PVC6G

PVC6Q

CLOCKWISE

in mm

Tolerance : ±0.3

in mm

Tolerance : ±0.3

(

)

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVC6p100C01

PVC6p200C01

PVC6p250C01

PVC6p500C01

PVC6p101C01

PVC6p201C01

PVC6p251C01

PVC6p501C01

PVC6p102C01

PVC6p202C01

PVC6p252C01

PVC6p502C01

PVC6p103C01

PVC6p203C01

PVC6p253C01

PVC6p503C01

PVC6p104C01

PVC6p204C01

PVC6p254C01

PVC6p504C01

PVC6p105C01

PVC6p205C01

PVC6p505C01

PVC6p100C04

PVC6p200C04

PVC6p250C04

PVC6p500C04

PVC6p101C04

PVC6p201C04

PVC6p251C04

PVC6p501C04

PVC6p102C04

PVC6p202C04

PVC6p252C04

PVC6p502C04

PVC6p103C04

PVC6p203C04

PVC6p253C04

PVC6p503C04

PVC6p104C04

PVC6p204C04

PVC6p254C04

PVC6p504C04

PVC6p105C04

0.5W(70°C)

Flow/Soldering Iron

1(240°±5°)

10ohm ±10%

20ohm ±10%

±100ppm/°C

25ohm ±10%

50ohm ±10%

100ohm ±10%

200ohm ±10%

250ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

2.5k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

5M ohm ±10%

10ohm ±10%

7

20ohm ±10%

25ohm ±10%

50ohm ±10%

100ohm ±10%

200ohm ±10%

250ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

2.5k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

500k ohm ±10%

1M ohm ±10%

Continued on the following page.

42

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PVC6p205C04

PVC6p505C04

0.5W(70°C)

Flow/Soldering Iron

1(240°±5°)

2M ohm ±10%

5M ohm ±10%

±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (A, D, E, G, H, M and Q).

The order quantity should be an integral multiple of the "Minimum Quantity" .

The last three digits express the individual specification codes. C01 for standard type and C04 for radial taping type (PVC6M/PVC6Q series only).

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PVC6p100A01

PVC6p200A01

PVC6p250A01

PVC6p500A01

PVC6p101A01

PVC6p201A01

PVC6p251A01

PVC6p501A01

PVC6p102A01

PVC6p202A01

PVC6p252A01

PVC6p502A01

PVC6p103A01

PVC6p203A01

PVC6p253A01

PVC6p503A01

PVC6p104A01

PVC6p204A01

PVC6p254A01

PVC6p504A01

PVC6p105A01

PVC6p205A01

PVC6p505A01

PVC6p100A04

PVC6p200A04

PVC6p250A04

PVC6p500A04

PVC6p101A04

PVC6p201A04

PVC6p251A04

PVC6p501A04

PVC6p102A04

PVC6p202A04

PVC6p252A04

PVC6p502A04

PVC6p103A04

PVC6p203A04

PVC6p253A04

PVC6p503A04

PVC6p104A04

PVC6p204A04

PVC6p254A04

PVC6p504A04

PVC6p105A04

PVC6p205A04

PVC6p505A04

0.5(70°C)

Flow/Soldering Iron

1(240°±5°)

10 ohm±10%

20 ohm±10%

25 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

250 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

2.5k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

5M ohm±10%

10 ohm±10%

20 ohm±10%

25 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

250 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

2.5k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

5M ohm±10%

±100

Non Standard

Product

(Cd Free)

Non Standard

Product

(Cd included)

Non Standard

Product

7

(Cd Free)

Non Standard

Product

(Cd included)

Continued on the following page.

43

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Construction

Rotor

Cover

"O"-Ring

Ceramic

Substrate

Wiper

Case

Terminal

■ Mounting Holes

PVC6A/PVC6E

PVC6D/PVC6H

2.5

(2)

(3)

(1)

(3)

(1)

2.5

(2)

Tolerance:±0.1

in mm

Tolerance:±0.1

in mm

PVC6M/PVC6Q

PVC6G

2.5

(1)

(2)

(3)

(1)

7

2.5

(2)

Tolerance ±0.1

Tolerance:±0.1

in mm

Continued on the following page.

44

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Characteristics

∆TR

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

±2%

Temperature Cycle

Humidity

IR

100Mohm min.

±1%

∆TR

Vibration (20G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±2%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR

±4%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

7

45

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV32 Series

0.6

1.0 Depth

■ Features

1. 6 standard terminal styles

6.6±0.5 Dia.

2. Round shaped body enables smaller area mount than

same 6mm square potentiometer.

3. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

4. Available for ultrasonic cleaning after soldering

5. Flammability : UL94V-0

0.85 Dia. max.

3−0.5±0.1 Dia.

#1#2 #3

#2

90°±6°

#1

CLOCKWISE

#3

PV32H

PV32R

PV32N

PV32T

■ Applications

1. HDTVs

in mm

Tolerance : ±0.3

(

)

2. Professional cameras

4. FAX

3. CATV

0.6

1.0 Depth

5. Printers

7. Power supply

6. Sensors

6.6±0.5 Dia.

3−0.5±0.1 Dia.

#1 #2 #3

#2

#1

CLOCKWISE

#3

2.5

in mm

Tolerance : ±0.3

(

)

0.6

1.0 Depth

6.4±0.4

5.9±0.4

6.9

0.6

1.0 Depth

6.6±0.5 DIA.

3−0.5±0.1 Dia.

#3 #2 #1

3−0.5±0.1 DIA.

5.0

#2

#1 #2 #3

#2

#1

CLOCKWISE

#3

#1

#3

CLOCKWISE

(

PV32P

2.5 2.5

2.5

in mm

Tolerance : ±0.3

(

)

7

Tolerance : ±0.3

6.4±0.4

5.9±0.4

6.4±0.4

6.9

0.6

6.9

5.9±0.4

0.6

1.0 Depth

3−0.5±0.1 Dia.

#1 #2 #3

5.0

#2

5.0

#2

#1

#3

#1

#3

CLOCKWISE

PV32S

2.5 2.5

in mm

Tolerance : ±0.3

in mm

Tolerance : ±0.3

(

)

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV32p100A01

PV32p200A01

PV32p250A01

0.5W(70°C)

Flow/Soldering Iron

1(230°±5°)

10ohm ±20%

20ohm ±20%

25ohm ±20%

±100ppm/°C

Continued on the following page.

46

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV32p500A01

PV32p101A01

PV32p201A01

PV32p251A01

PV32p501A01

PV32p102A01

PV32p202A01

PV32p252A01

PV32p502A01

PV32p103A01

PV32p203A01

PV32p253A01

PV32p503A01

PV32p104A01

PV32p204A01

PV32p254A01

PV32p504A01

PV32p105A01

PV32p205A01

PV32p505A01

0.5W(70°C)

Flow/Soldering Iron

1(230°±5°)

50ohm ±20%

100ohm ±20%

200ohm ±20%

250ohm ±20%

500ohm ±20%

1k ohm ±20%

2k ohm ±20%

2.5k ohm ±20%

5k ohm ±20%

10k ohm ±20%

20k ohm ±20%

25k ohm ±20%

50k ohm ±20%

100k ohm ±20%

200k ohm ±20%

250k ohm ±20%

500k ohm ±20%

1M ohm ±20%

2M ohm ±20%

5M ohm ±20%

±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (H, P, R, N, S and T).

The order quantity should be an integral multiple of the "Minimum Quantity".

■ Construction

Rotor

Cover

"O"-Ring

Wiper

Resistive

Element

Ceramic

Substrate

Terminal

7

■ Mounting Holes

PV32H

PV32R

(1)

(2)

(3)

(2)

2.5

(1)

(3)

Tolerance:±0.1

in mm

Continued on the following page.

47

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Mounting Holes

PV32P/PV32S

PV32N

2.5

(2)

(3)

(1)

(3)

(1)

2.5

(2)

Tolerance ±0.1

in mm

Tolerance:±0.1

in mm

PV32T

2.5

(1)

(3)

(2)

Tolerance:±0.1

in mm

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

∆TR

±1%

Vibration (20G)

Shock (100G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±2%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

7

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR

±4%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

48

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV34 Series

9.6

5.5±0.5

4.9

0.3

■ Features

1. 5 standard terminal styles

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Flammability : UL94V-0

2.5 2.5

#1

#3

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

#2

#1

#3

CLOCKWISE

#2

PV34F

PV34H

PV34P

PV34X

in mm

(

)

Tolerance : ±0.3

■ Applications

1. HDTVs

2. Professional cameras

4. Printers

9.6

3. CATV

4.9

5. Sensors

6. Switching power supplies

3−0.5±0.1 DIA.

#1

#2 #3

#2

#1

CLOCKWISE

#3

2.5 2.5

in mm

(

Tolerance ±0.3

9.6

5.5±0.5

4.9

0.3

2.5 2.5

#2

#1

#3

#1

#3

CLOCKWISE

in mm

(

)

#2

Tolerance : ±0.3

7

9.6

4.9

3−0.5±0.1 Dia.

#1

#2 #3

#1

#3 #2

#2

#1

CLOCKWISE

#3

#1

#3

CLOCKWISE

PV34W

2.5 2.5

in mm

Tolerance : ±0.3

in mm

Tolerance : ±0.3

(

)

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV34p100C01

PV34p200C01

PV34p500C01

0.5W(70°C)

Flow/Soldering Iron

1(280°±15°)

10ohm ±10%

20ohm ±10%

50ohm ±10%

±150ppm/°C

Continued on the following page.

49

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV34p101C01

PV34p201C01

PV34p501C01

PV34p102C01

PV34p202C01

PV34p502C01

PV34p103C01

PV34p203C01

PV34p253C01

PV34p503C01

PV34p104C01

PV34p204C01

PV34p254C01

PV34p504C01

PV34p105C01

PV34p205C01

0.5W(70°C)

Flow/Soldering Iron

1(280°±15°)

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

±150ppm/°C

±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (F, H, P, X and W).

The order quantity should be an integral multiple of the "Minimum Quantity".

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PV34p100A01

PV34p200A01

PV34p500A01

PV34p101A01

PV34p201A01

PV34p501A01

PV34p102A01

PV34p202A01

PV34p502A01

PV34p103A01

PV34p203A01

PV34p253A01

PV34p503A01

PV34p104A01

PV34p204A01

PV34p254A01

PV34p504A01

PV34p105A01

PV34p205A01

0.5(70°C)

Flow/Soldering Iron

1(280°±15°)

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

7

■ Construction

Case

Rotor

"O"-Ring

Alumina Substrate

Terminal

Wiper

Cermet Resistive

Element

50

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

■ Mounting Holes

PV34F

PV34H/PV34P

2.5

(1)

(3)

(1)

(3)

(2)

Tolerance:±0.1

in mm

Tolerance:±0.1

in mm

PV34W

PV34X

2.5

(1)

(2)

(3)

(1)

2.5

(2)

Tolerance ±0.1

Tolerance:±0.1

in mm

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

∆TR

±1%

Vibration (20G)

Shock (100G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±2%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR RV100kohm ... ±3%

7

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

RG100kohm ... ±5%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR

R

: Insulation Resistance

: Standard Total Resistance

51

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVC6/PV32/PV34 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

trimmer potentimeter may be damaged by

mechanical stress.

(1) Standard soldering condition

(a) Flow soldering :

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

3. Cleaning

>Pre-heating temp. 80-100 deg. C

>Soldering temp.

>Soldering time

260 deg. C max.

3 sec. max.

(b) Soldering iron :

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

>Temperature of tip 300 deg. C max.

>Soldering time

>Wattage of iron

3 sec. max.

40W max.

7

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

>Power: 600W (67 liter) max.

>Frequency: 28kHz

(2) To minimize mechanical stress when adjusting,

the trimmer potentiometer should be mounted onto

PCB without gap.

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

cleaning compatibility usually depends on the jig

construction and/or the cleaning condition such

as the depth of immersion, please check the

cleaning equipment to determine the suitable

conditions.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

2. Mounting

(1) Use PCB hole to meet the pin of the trimmer

potentiometer. If the trimmer potentiometer

installs into insufficient PCB hole, the

If the trimmer potentiometer is cleaned by

other conditions, the trimmer potentiometer may

be damaged.

52

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVC6/PV32/PV34 Series Notice

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdriver for manual adjustment

If you place an order, please specify the

Murata P/N.

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

applied, the trimmer potentiometer may not

function.

VESSEL MFG. : NO.9000+0x30

(Murata P/N : KMDR150)

TORAY INDUSTRIES, INC. : SA-2225

(Murata P/N : KMDR070)

3. When adjusting with an adjustment tool, the applied

force to the adjustment screw should not exceed

4.9N (Ref.; 500gf). If excessive force is applied,

the trimmer potentiometer may not function due to

damage.

ENGINEER INC. : DA-40

(Murata P/N : KMDR180)

* Recommended screwdriver bit for automatic

adjustment

4. The rotational torque at the position of the

adjustment range should not exceed the stop

strength.

VESSEL MFG. : NO.CA-10

(Murata P/N : KMBT090)

5. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

TORAY INDUSTRIES, INC. : JB-2225

(Murata P/N : KMBT070)

We can supply the screwdrivers avobe.

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

7

53

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

Lead Sealed Type Multi-turns PV12/PV37/PV23/PV22/PV36 Series

PV12 Series

0.6±0.1

6.6±0.1

7.0±1.0

0.7±0.1 Depth

■ Features

1. The unique inner gear system recognizes the

position of the center of the shaft of the

potentiometer.

0.5

#2

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

#2

#3

#1

#3

4. Clutch mechanism prevents excessive wiper rotation.

CLOCKWISE

90°±6°

PV12H

PV12P

PV12T

in mm

Tolerance : ±0.3

■ Applications

1. HDTVs

(

)

2. Professional cameras

4. FAX

3. CATV

5. Printers

6. Sensors

0.6±0.1

7.0±1.0

6.6±0.1

0.7±0.1 Depth

7. Switching power supplies

0.5

2.5 2.5

#2

#1

#3

#1

CLOCKWISE

in mm

Tolerance : ±0.3

(

)

7.7±0.3

0.6±0.1

7.7±0.3

0.6±0.1

0.7±0.1 Depth

3−0.5±0.1 Dia.

#1

#2 #3

7.6±0.3

#1

#2 #3

7.6±0.3

6.3±0.3

#2

#1

#3

#1

CLOCKWISE

#3

CLOCKWISE

PV12S

in mm

Tolerance : ±0.3

in mm

)

(

)

(

2.5

Tolerance : ±0.3

8

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV12p100A01

PV12p200A01

PV12p500A01

PV12p101A01

PV12p201A01

PV12p501A01

PV12p102A01

PV12p202A01

PV12p502A01

PV12p103A01

0.5W(70°C)

Flow/Soldering Iron

4

10ohm ±10%

20ohm ±10%

50ohm ±10%

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

±100ppm/°C

Continued on the following page.

54

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV12p203A01

PV12p503A01

PV12p104A01

PV12p204A01

PV12p504A01

PV12p105A01

PV12p205A01

0.5W(70°C)

Flow/Soldering Iron

4

20k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

±100ppm/°C

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (H, P, T and S).

The order quantity should be an integral multiple of the "Minimum Quantity".

■ Construction

Shaft

Case

"O"-Ring

Gear

Rotor

Insert

Wiper

Ceramic Resistive

Element

Alumina Substrate

Terminal

■ Mounting Holes

PV12H

PV12P/PV12S

(2)

(3)

(1)

(2)

2.5

(1)

(3)

Tolerance:±0.1

in mm

8

PV12T

2.5

(1)

(3)

(2)

Tolerance:±0.1

in mm

55

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

±1%

∆TR

Vibration (20G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±2%

∆TR ±3%

∆V.S.S. ±1.5%

∆TR ±3%

∆V.S.S. ±1.5%

Shock (100G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR

±3%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

8

56

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV37 Series

0.6

1.0

Marking

1.2

■ Features

1. Smaller volume (about one-third) than 25-turns

potentiometer

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. 5 standard terminal styles

3−0.4±0.1 Dia.

#1 #2

6.4

#3

#2

#1

CLOCKWISE

#3

6. Both Top and side adjustment directions

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

PV37P

PV37W

PV37X

PV37Z

in mm

Tolerance : ±0.3

2.5 2.5

(

)

1.1

6.4

1.8±0.2 Dia.

0.6±0.2

1.2

■ Applications

1. Measuring instruments 2. OA equipment

Marking

3. Medical equipment

4. Power supply

5. Base station for cellular phone

3−0.4±0.1 Dia.

#3

#2

#1

#2

2.5 2.5

#1

CLOCKWISE

#3

in mm

Tolerance : ±0.3

(

)

6.4

0.6

1.0

Marking

1.1

3−0.4±0.1 Dia.

#3

#2

#1

2.5 2.5

#2

#1

CLOCKWISE

#3

in mm

Tolerance : ±0.3

(

)

1.1

0.6

1.0

6.4

Marking

1.8±0.2 Dia.

0.6±0.2

1.1

1.2

Marking

8

3−0.4±0.1 Dia.

#3 #2

2.5 2.5

#1

#3 #2 #1

2.5 2.5

#2

#1

CLOCKWISE

#3

#1

#3

PV37Y

CLOCKWISE

in mm

Tolerance : ±0.3

in mm

Tolerance : ±0.3

(

)

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV37p100C01

PV37p200C01

PV37p500C01

0.25W(85°C)

Flow/Soldering Iron

12

10ohm ±10%

20ohm ±10%

50ohm ±10%

±150ppm/°C

Continued on the following page.

57

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV37p101C01

PV37p201C01

PV37p501C01

PV37p102C01

PV37p202C01

PV37p502C01

PV37p103C01

PV37p203C01

PV37p253C01

PV37p503C01

PV37p104C01

PV37p204C01

PV37p254C01

PV37p504C01

PV37p105C01

PV37p205C01

PV37p100C31

PV37p200C31

PV37p500C31

PV37p101C31

PV37p201C31

PV37p501C31

PV37p102C31

PV37p202C31

PV37p502C31

PV37p103C31

PV37p203C31

PV37p253C31

PV37p503C31

PV37p104C31

PV37p204C31

PV37p254C31

PV37p504C31

PV37p105C31

PV37p205C31

0.25W(85°C)

Flow/Soldering Iron

12

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

10ohm ±10%

±150ppm/°C

20ohm ±10%

50ohm ±10%

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).

The order quantity should be an integral multiple of the "Minimum Quantity".

The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV37Y/PV37Z series only).

8

58

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PV37p100A01

PV37p200A01

PV37p500A01

PV37p101A01

PV37p201A01

PV37p501A01

PV37p102A01

PV37p202A01

PV37p502A01

PV37p103A01

PV37p203A01

PV37p253A01

PV37p503A01

PV37p104A01

PV37p204A01

PV37p254A01

PV37p504A01

PV37p105A01

PV37p205A01

PV37p100A31

PV37p200A31

PV37p500A31

PV37p101A31

PV37p201A31

PV37p501A31

PV37p102A31

PV37p202A31

PV37p502A31

PV37p103A31

PV37p203A31

PV37p253A31

PV37p503A31

PV37p104A31

PV37p204A31

PV37p254A31

PV37p504A31

PV37p105A31

PV37p205A31

0.25(85°C)

Flow/Soldering Iron

12

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Gear

Case

8

Adjustment Screw

Terminal

Wiper

Cermet Resistive

Element

Alumina Substrate

59

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

■ Mounting Holes

PV37P

PV37W/PV37X

2.5

(3)

(1)

(3)

(2)

Tolerance:±0.1

Tolerance ±0.1

in mm

PV37Y/PV37Z

(3)

(2)

(1)

2.5

Tolerance:±0.1

in mm

■ Characteristics

∆TR

±1%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

∆TR

±1%

Vibration (20G)

Shock (100G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR RV100ohm ... ±3%

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

8

RG100ohm ... ±2%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR

R

: Insulation Resistance

: Standard Total Resistance

60

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV23 Series

19.1

1.5

0.8

■ Features

4.6

1. Small size (4.6x6.4x19.1mm) and high power rating

(0.75W at 70deg.C)

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

3−0.5±0.1 Dia.

#1

#2

#3

#2

3.3

12.7

#1

#3

5.1

CLOCKWISE

PV23P

in mm

(

)

Tolerance : ±0.3

■ Applications

19.1

1. Measuring instruments 2. FAX

1.5

0.8

3. Copier

4. Printers

4.6

5. Sensors

3−0.5±0.1 Dia.

#1

#2

#3

#2

17.8

0.6

#1

CLOCKWISE

#3

7.6

PV23Y

in mm

Tolerance : ±0.3

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV23p100C01

PV23p200C01

PV23p500C01

PV23p101C01

PV23p201C01

PV23p501C01

PV23p102C01

PV23p202C01

PV23p502C01

PV23p103C01

PV23p203C01

PV23p503C01

PV23p104C01

PV23p204C01

PV23p504C01

PV23p105C01

PV23p205C01

0.75W(70°C)

Flow/Soldering Iron

15

10ohm ±10%

20ohm ±10%

±150ppm/°C

±100ppm/°C

50ohm ±10%

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

8

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P and Y).

The order quantity should be an integral multiple of the "Minimum Quantity".

61

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PV23p100A01

PV23p200A01

PV23p500A01

PV23p101A01

PV23p201A01

PV23p501A01

PV23p102A01

PV23p202A01

PV23p502A01

PV23p103A01

PV23p203A01

PV23p503A01

PV23p104A01

PV23p204A01

PV23p504A01

PV23p105A01

PV23p205A01

0.75(70°C)

Flow/Soldering Iron

15

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Post

Adjustment

Screw

Case

Terminal

Alumina Substrate

Wiper

Cermet

Resistive

Element

■ Mounting Holes

PV23P

PV23Y

12.7

17.8

7.6

5.1

(3)

(1)

(3)

(2)

8

Tolerance:±0.1

in mm

Tolerance:±0.1

in mm

62

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

±1%

∆TR

Vibration (20G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

Shock (50G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR

±3%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

8

63

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV22 Series

31.8

3.2±0.2

25.4±0.2

■ Features

152 min.

5.0

1.7

1. High power rating (1W at 70 deg.C)

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

0.8±0.2

Mounting holes 2−2.5±0.2 Dia.

6.0

#2

#1(Yellow)

#2

#1

CLOCKWISE

#3

(Red)

PV22L

PV22S

PV22Y

#3(Green)

Insulated standard wire

in mm

Tolerance : ±0.3

(

)

■ Applications

1. Measuring instruments 2. FAX

31.8

3. Copier

4. Printers

3.2±0.2

25.4±0.2

5. Sensors

5.0

1.7

0.8±0.2

3−0.7±0.1 Dia.

#2 #1

#3

Mounting holes 2−2.5±0.2 Dia.

6.0

6.6

#2

#1

#3

CLOCKWISE

17.8

22.9

in mm

Tolerance : ±0.3

(

)

31.8

3.2±0.2

25.4±0.2

5.0

1.7

0.8±0.2

3−0.7±0.1 Dia.

#1

#2

#3

Mounting holes 2−2.5±0.2 Dia.

6.0

6.6

#2

#1

#3

CLOCKWISE

7.6

in mm

Tolerance : ±0.3

17.8

(

)

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV22p100C01

PV22p200C01

PV22p500C01

PV22p101C01

PV22p201C01

PV22p501C01

PV22p102C01

PV22p202C01

PV22p502C01

PV22p103C01

PV22p203C01

PV22p503C01

PV22p104C01

PV22p204C01

PV22p504C01

PV22p105C01

1.0W(70°C)

Flow/Soldering Iron

22

10ohm ±10%

20ohm ±10%

±100ppm/°C

8

50ohm ±10%

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

500k ohm ±10%

1M ohm ±10%

Continued on the following page.

64

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV22p205C01

1.0W(70°C)

Flow/Soldering Iron

22

2M ohm ±10%

±100ppm/°C

Operating Temperature Range: -55 to 150 °C

The blank column is filled with the code of adjustment direction and lead type (L, S and Y).

The order quantity should be an integral multiple of the "Minimum Quantity".

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PV22p100A01

PV22p200A01

PV22p500A01

PV22p101A01

PV22p201A01

PV22p501A01

PV22p102A01

PV22p202A01

PV22p502A01

PV22p103A01

PV22p203A01

PV22p503A01

PV22p104A01

PV22p204A01

PV22p504A01

PV22p105A01

PV22p205A01

1.0(70°C)

Flow/Soldering Iron

22

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Adjustment

Screw

Post

Alumina

Substrate

Case

Cermet

Resistive

Element

Wiper

Terminal

■ Mounting Holes

PV22S

PV22Y

8

17.8

7.6

(2)

(1)

(3)

(1)

22.9

(2)

Tolerance:±0.1

in mm

Tolerance:±0.1

in mm

Continued on the following page.

65

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

±1%

∆TR

Vibration (20G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

Shock (50G)

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

∆TR

±2%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR : Insulation Resistance

8

66

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV36 Series

1.3

0.7

Marking

1.3

■ Features

1. High resolution 25-turns enables precision

adjustment easily.

3-0.5±0.1 Dia.

2. Sealed construction protects the interior from dust

and liquid, which achieves stable performance.

3. Available for ultrasonic cleaning after soldering

4. Clutch mechanism prevents excessive wiper rotation.

5. 5 standard terminal styles

#1 #2 #3

9.6

#2 (Wiper)

#3

#1

6. Both Top and side adjustment directions.

7. To be complied with RoHS directive by new Cd free

cermet resistive material. Pb free terminals with

Sn plating.

Clockwise

PV36P

PV36W

PV36X

PV36Z

(in mm)

(Tolerance : ±0.3)

2.5 2.5

1.2

9.6

1.3

2.0 Dia.

0.6

■ Applications

1. Measuring instruments 2. OA equipment

Marking

3. Medical equipment

4. Power supply

5. Base station for cellular phone

3-0.5±0.1 Dia.

#3 #2 #1

2.5 2.5

#2 (Wiper)

#1

#3

Clockwise

(in mm)

(Tolerance : ±0.3)

9.6

0.7

1.3

Marking

1.2

3-0.5±0.1 Dia.

#3 #2 #1

2.5 2.5

#2 (Wiper)

#3

#1

Clockwise

(in mm)

(Tolerance : ±0.3)

9.6

1.2

2.0 Dia.

9.6

1.3

0.7

1.3

Marking

1.2

0.6

Marking

8

3-0.5±0.1 Dia.

#3 #2 #1

2.5 2.5

#2 (Wiper)

#3

#2 (Wiper)

#1

#3

Clockwise

PV36Y

Clockwise

(in mm)

(Tolerance : ±0.3)

(in mm)

(Tolerance : ±0.3)

2.5 2.5

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV36p100C01

PV36p200C01

PV36p500C01

0.5W(70°C)

Flow/Soldering Iron

25

10ohm ±10%

20ohm ±10%

50ohm ±10%

±150ppm/°C

Continued on the following page.

67

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

Number of Turns

(Effective Rotation Angle)

Part Number

Power Rating

Soldering Method

Total Resistance Value

TCR

PV36p101C01

PV36p201C01

PV36p501C01

PV36p102C01

PV36p202C01

PV36p502C01

PV36p103C01

PV36p203C01

PV36p253C01

PV36p503C01

PV36p104C01

PV36p204C01

PV36p254C01

PV36p504C01

PV36p105C01

PV36p205C01

PV36p100C31

PV36p200C31

PV36p500C31

PV36p101C31

PV36p201C31

PV36p501C31

PV36p102C31

PV36p202C31

PV36p502C31

PV36p103C31

PV36p203C31

PV36p253C31

PV36p503C31

PV36p104C31

PV36p204C31

PV36p254C31

PV36p504C31

PV36p105C31

PV36p205C31

0.5W(70°C)

Flow/Soldering Iron

25

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

10ohm ±10%

±150ppm/°C

±100ppm/°C

±150ppm/°C

±100ppm/°C

20ohm ±10%

50ohm ±10%

100ohm ±10%

200ohm ±10%

500ohm ±10%

1k ohm ±10%

2k ohm ±10%

5k ohm ±10%

10k ohm ±10%

20k ohm ±10%

25k ohm ±10%

50k ohm ±10%

100k ohm ±10%

200k ohm ±10%

250k ohm ±10%

500k ohm ±10%

1M ohm ±10%

2M ohm ±10%

Operating Temperature Range: -55 to 125 °C

The blank column is filled with the code of adjustment direction and lead type (P, X, Y, W and Z).

The order quantity should be an integral multiple of the "Minimum Quantity".

The last three digits express the individual specification codes. C01 for standard type and C31 for radial taping type (PV36W/PV36X series only).

8

68

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Power Rating

(W)

Number of Turns

(Effective Rotation Angle)

TCR

(ppm/°C)

Part Number

Soldering Method

Total Resistance Value

Remarks

PV36p100A01

PV36p200A01

PV36p500A01

PV36p101A01

PV36p201A01

PV36p501A01

PV36p102A01

PV36p202A01

PV36p502A01

PV36p103A01

PV36p203A01

PV36p253A01

PV36p503A01

PV36p104A01

PV36p204A01

PV36p254A01

PV36p504A01

PV36p105A01

PV36p205A01

PV36p100A31

PV36p200A31

PV36p500A31

PV36p101A31

PV36p201A31

PV36p501A31

PV36p102A31

PV36p202A31

PV36p502A31

PV36p103A31

PV36p203A31

PV36p253A31

PV36p503A31

PV36p104A31

PV36p204A31

PV36p254A31

PV36p504A31

PV36p105A31

PV36p205A31

0.5(70°C)

Flow/Soldering Iron

25

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

10 ohm±10%

20 ohm±10%

50 ohm±10%

100 ohm±10%

200 ohm±10%

500 ohm±10%

1k ohm±10%

2k ohm±10%

5k ohm±10%

10k ohm±10%

20k ohm±10%

25k ohm±10%

50k ohm±10%

100k ohm±10%

200k ohm±10%

250k ohm±10%

500k ohm±10%

1M ohm±10%

2M ohm±10%

±100

Non Standard

Product

(Cd included)

■ Construction

Adjustment Screw

Terminal

8

Case

Wiper

Cermet Resistive Element

Gear

Alumina Substrate

69

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

■ Mounting Holes

PV36P

PV36W/X

2.5

(3)

(2)

(1)

(3)

(2)

2.5

Tolerance:±0.1

in mm

Tolerance:±0.1

in mm

PV36Y/Z

2.5

(3)

(1)

(2)

Tolerance ±0.1

in mm

■ Characteristics

∆TR

±2%

Temperature Cycle

∆V.S.S. ±1%

∆TR

IR

±2%

Humidity

100Mohm min.

∆TR

±1%

Vibration (20G)

Shock (100G)

∆V.S.S. ±1%

∆TR ±1%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR ±2%

∆V.S.S. ±1%

∆TR ±3%

∆V.S.S. ±1%

∆TR RV1kohm, RU500kohm ±5%

Temperature Load Life

Low Temperature Exposure

High Temperature Exposure

Rotational Life (200 cycles)

...

8

...

1kohmFRF500kohm ±3%

∆TR

: Total Resistance Change

∆V.S.S. : Voltage Setting Stability

IR

R

: Insulation Resistance

: Standard Total Resistance

70

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV12/PV37/PV23/PV22/PV36 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40 deg. C and

relative humidity of 30-85%RH.

the following environmental conditions:

(1) Corrosive gaseous atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

5. Do not store under direct sunlight.

(Ex. Oil, Medical liquid, Organic solvent, etc.)

(3) Dusty / dirty atmosphere

6. If you use the trimmer potentiometer in an

environment other than listed below, please

consult with a Murata factory representative prior

to using.

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

The trimmer potentiometer should not be used under

(7) Other variations of the above

■ Notice (Rating)

1. When using with partial load (rheostat), minimize

the power depending on the resistance value.

2. The maximum input voltage to a trimmer

potentiometer should not exceed (P.R)^1/2 or the

maximum operating voltage, whichever is smaller.

3. The maximum input current to a trimmer

potentiometer should not exceed (P/R)^1/2 or the

allowable wiper current, whichever is smaller.

■ Notice (Soldering and Mounting)

1. Soldering

trimmer potentimeter may be damaged by

mechanical stress.

(1) Standard soldering condition

(a) Flow soldering :

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the trimmer

potentiometer is mounted to the PCB.

3. Cleaning

>Pre-heating temp. 80-100 deg. C

>Soldering temp.

>Soldering time

260 deg. C max.

3 sec. max.

(b) Soldering iron :

(1) Isopropyl-alcohol and Ethyl-alcohol are

applicable solvents for cleaning. If you use any

other types of solvents, please consult with a

Murata factory representative prior to using.

(2) The total cleaning time by cold dipping, vapor

and ultrasonic washing (conditions as below)

method should be less than 3 minutes.

(3) For ultra-sonic cleaning, the available

condition is as follows.

>Temperature of tip 300 deg. C max.

>Soldering time

>Wattage of iron

3 sec. max.

40W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the trimmer potentiometer may deviate from the

specified characteristics.

>Power: 600W (67 liter) max.

8

>Frequency: 28kHz

(2) To minimize mechanical stress when adjusting,

the trimmer potentiometer should be mounted onto

PCB without gap.

>Temperature: Ambient temperature

Due to the ultra-sonic cleaning equipment's

peculiar self-resonance point and that the

cleaning compatibility usually depends on the jig

construction and/or the cleaning condition such

as the depth of immersion, please check the

cleaning equipment to determine the suitable

conditions.

(3) The soldering iron should not come in contact

with the case of the trimmer potentiometer. If

such contact does occur, the trimmer

potentiometer may be damaged.

2. Mounting

(1) Use PCB hole to meet the pin of the trimmer

potentiometer. If the trimmer potentiometer

installs into insufficient PCB hole, the

If the trimmer potentiometer is cleaned by

other conditions, the trimmer potentiometer may

be damaged.

71

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PV12/PV37/PV23/PV22/PV36 Series Notice

■ Notice (Handling)

1. Use suitable screwdrivers that fit comfortably in

driver slot. We recommend the screwdrivers below.

* Recommended screwdriver for manual adjustment

ENGINEER INC. : DA-40

applied, the trimmer potentiometer may not

function.

3. When adjusting with an adjustment tool, the applied

force to the adjustment screw should not exceed

4.9N (Ref.; 500gf). If excessive force is applied,

the trimmer potentiometer may not function due to

damage.

(Murata P/N : KMDR180)

We can supply the screwdrivers above.

If you place order, please specify the Murata P/N.

2. Don't apply more than 9.8N (Ref.; 1kgf) of twist

and stress after mounting onto PCB to prevent

contact intermittence. If excessive force is

4. When using a lock paint to fix slot position,

please use adhesive resin without chlorine or

sulfur (Three-bond "1401 series").

■ Notice (Other)

1. Please make sure that your product has been

evaluated and confirmed against your

specifications when our product is mounted to your

product.

2. Murata cannot guarantee trimmer potentiometer

integrity when used under conditions other than

those specified in this document.

8

72

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Trimmer Potentiometers

Angle Sensing Potentiometer SMD Dust-proof Type 12mm Size PVS1 Series

0.6

2.1

C0.2 max.

#2

C0.15 max.

■ Features

0.5 rib

1.5±0.1

(D formation

thru-hole length)

1. Dust-proof construction protects the interior from

dust, which maintains stable characteristics.

2. Compliant to high peak temperature lead free

soldering.

2-R0.05rib

#1 #2 #3

11.0

+0.1

4.0

Dia.

-0

0.2

1.0

5.0

3. Excellent resistance materials and high reliability

wiper achieves 1M cycles.

4. D formation thru-hole rotor enables selection of

any kind of gear shape.

PVS1A

4-0.8±0.1

5.0

(in mm)

(Tolerance: ±0.3)

5. Leaded terminal type is available.

6. Ultra-thin size (2.1mm height)

7. Au plated terminals without Lead.

8.5±0.1

Mounting Face

2.9 3.5

#2

0.8

■ Applications

2.0

0.5 rib

1. Animal robot

1.5±0.1

(D formation

thru-hole length)

2. Switch for automotive

3. Motor drive unit

2-R0.05rib

+0.1

#1 #2 #3

4.0

Dia.

-0

11.0

5.0

4. Radio control equipment

5. Electric motor-driven bicycle

0.2

1.0

PVS1L

4-0.8±0.2

2.52.5

5.0

(in mm)

(Tolerance: ±0.3)

Total Resistance Value

(k ohm)

Linearity

(% )

Part Number

Effective Rotational Angle

333.3° (Ref.)

TCR

Rotational Life

1M cycles

PVS1A103A01

(SV01A103AEA01)

10 ±30%

±2

±500ppm/°C

PVS1L103A03

(SV01L103AEA11)

333.3° (Ref.)

1M cycles

PVS1 series will be changed to new part number "SV01" since Oct. 1, 2004.

■ Construction

PVS1A

PVS1L

Rotor

Cover

#2 Terminal

Resin Substrate

#3 Terminal

#2 Terminal

#1 Terminal

9

#2 Terminal

Wiper

Resistive Element

#1 Terminal

Continued on the following page.

73

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Continued from the preceding page.

■ Standard Land Pattern

■ Standard Mounting Holes

PVS1A

PVS1L

+0.1

4-1.0

Dia.

-0

(1.1)

2.5 2.5

5.0

4-1.8

5.0

(in mm)

(Tolerance : ±0.1)

(in mm)

(Tolerance: ±0.1)

(8.5)

■ Characteristics

Temperature Cycle

(Thermal Shock)

∆TR

Linearity ±3%

∆TR ±20%

Linearity ±3%

∆TR ±10%

Linearity ±3%

∆TR ±10%

Linearity ±3%

∆TR ±20%

Linearity ±3%

±20%

Humidity

Vibration

Shock (20G)

Humidity Load Life

∆TR

+5/-30%

High Temperature

Exposure

Linearity ±3%

∆TR

Linearity ±3%

∆TR ±20%

Linearity ±3%

∆TR: Total Resistance Change

±20%

Low Temperature

Exposure

Rotational Life

(1M cycles)

9

74

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVS1 Series Notice

■ Notice (Operating and Storage Conditions)

1. Store in temperatures of -10 to +40deg. C and

relative humidity of 30-85%RH.

(1) Corrosive gasses atmosphere

(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia

gas, Sulfuric acid gas, Nitric oxide gas, etc.)

(2) In liquid

2. Do not store in or near corrosive gases.

3. Use within six months after delivery.

4. Open the package just before using.

(Ex. Water, Oil, Medical liquid, Organic

solvent, etc.)

5. Do not store under direct sunlight.

6. Do not use the rotary position sensor under the

following environmental conditions. If you use

the rotary position sensor in an environment other

these listed below, please consult with Murata

factory representative prior to using.

(3) Dusty / dirty atmosphere

(4) Direct sunlight

(5) Static voltage nor electric/magnetic fields

(6) Direct sea breeze

(7) Other variations of the above

■ Notice (Soldering and Mounting)-PVS1A Type

1. Soldering

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the rotary position sensor may deviate from the

specified characteristics.

(1) PVS1A series can be soldered by reflow soldering

method and soldering iron. Do not use flow

soldering method (dipping).

(2) The dimension of land pattern used should be

Murata's standard land pattern at reflow

soldering. Excessive land area may cause

displacement due to the effect of the surface

tension of the solder. Insufficient land area

may cause insufficient soldering strength on PCB.

(3) Standard soldering condition

(4) The amount of solder is critical. Insufficient

amounts of solder can lead to insufficient

soldering strength on PCB. Excessive amounts of

solder may cause bridging between the

terminals.

(5) The soldering iron should not come in contact

with the cover of the rotary position sensor. If

such contact does occur, the rotary position

sensor may be damaged.

(a) Reflow soldering : Refer to the standard

temperature profile.

(b) Soldering iron:

2. Mounting

>Temperature of tip 360 deg. C max.

(1) Do not apply excessive force (preferable 9.8N

(Ref.; 1kgf) max.), when the rotary position

sensor is mounted to the PCB.

>Soldering time

>Diameter

3 sec. max./1 terminal

3mm max.

>Wattage of iron 30W max.

(2) Do not warp and/or bend PCB to prevent the rotary

position sensor from breakage.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

3. Cleaning

Cannot be cleaned because of open construction.

■ Notice (Soldering and Mounting)-PVS1L Type

1. Soldering

soldering conditions are not suitable, e.g.,

excessive time and/or excessive temperature,

the rotary position sensor may deviate from the

specified characteristics.

(1) PVS1L series can be soldered by flow soldering

method and soldering iron. Do not use reflow

soldering method.

(2) Standard soldering condition

(a) Flow soldering

(3) The amount of solder is critical.

(4) The soldering iron should not come in contact

with the cover of the rotary position sensor. If

such contact does occur, the rotary position

sensor may be damaged.

>Pre-haeting temp.: 80-100 deg. C

>Soldering temp. : 260 deg. C max.

>Soldering time : 3 sec. max.

(b) Soldering iron

2. Mounting

9

>Temperature of tip: 360 deg. C max.

>Soldering time : 3 sec. max./1 terminal

(1) Use PCB hole to meet the pin of the rotary

position sensor. If the rotary position sensor

is installed into insufficient PCB hole, the

rotary position sensor may be damaged by

mechanical stress.

>Diameter

: 3mm max.

>Wattage of iron : 30W max.

Before using other soldering conditions than

those listed above, please consult with Murata

factory representative prior to using. If the

(2) Do not apply excessive force (preferably 9.8N

(Ref.; 1kgf) max.), when the rotary position

Continued on the following page.

75

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

PVS1 Series Notice

Continued from the preceding page.

sensor is mounted to the PCB.

3. Cleaning

Cannot be cleaned because of open construction.

■ Reflow Soldering Standard Profile

Gradual cooling

in air

Pre-heating in air

Soldering

260

230

200

150

100

0

60-120 sec.

40 sec. max.

Time

(Melting zone)

■ Notice (Handling)

Uncontrolled mechanical force except usual rotation on

the hollow rotor of product, may cause big change of

electrical characteristic, big increase of rotational

torque or mechanical damage of product.

Therefore, please pay your attention on the following

points for your design.

1. The fixing method of product must be soldering by

the terminals of product. And please don't fix by

screw cramping of supporting board which might

cause mechanical deformation of product.

2. Your connecting shaft must be sustained by your

bearing and any uncontrolled force should not

apply on the hollow rotor of product.

■ Notice (Other)

1. Please make sure the connecting impedance is not to

be less than 10M ohm. The rotary position sensor

is designed to connect the output terminal and A/D

port of the microprocessor directly. Therefore,

connecting impedance presupposes certain M ohm and

the contact resistance is set high.

applied the mean value.

(2) Data considered as error should be invalid.

(3) If suspicious data is found, the data should be

re-installed.

3. Before using rotary position sensor, please test

after assembly in your particular mass production

system.

2. To minimize the processing error and noise

influence which occur in rare cases, when data is

installed through the product, please note the

following items and program your software.

(1) Data install should be done plural times and

4. MURATA cannot guarantee rotary position sensor

integrity when used under conditions other than

those specified in this document.

9

76

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Specifications and Test Methods

SMD Open Type and SMD Sealed Type PVM4A_C01 Series Specifications and Test Methods

The tests and measurements should be conducted under the condition of 15 to 35°C of temperature, 25 to 75% of relative humidity and 86 to 106 kpa of

atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the above mentioned

conditions, the tests and measurements should be conducted under the condition of 25±2°C of temperature and, 45 to 55% of relative humidity and 86 to

106 kpa of atmospheric pressure.

No.

Item

Test Methods

Measure total resistance between the resistance element and terminals (terminals #1 and #3) with the contact arm

positioned against a stop. The positioning of the contact arm and terminal should be the same for subsequent total

resistance measurements on the same device.

Use the test voltage specified in Table-1 for total resistance measurements. This voltage should be used whenever a

subsequent total resistance measurement is made.

Total Resistance,

Nominal (ohm)

Maximum Test

Voltage (V)

1

Total Resistance

10VRV100

100FRV1k

1kFRV10k

10kFRV100k

100kFR

1.0

3.0

10.0

30.0

100.0

Table 1: Total resistance test voltage

Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance

between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-

wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-

minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not

exceeded.

2

Residual Resistance

Contact resistance variation should be measured with the measuring circuit shown below, or its equivalent. The

operating wiper should be rotated in both directions through 90% of the actual effective-electrical travel for a total of

6 cycles.

The rate of rotation of the operating wiper should be such that the wiper completes 1 count in determining whether or

not a contact resistance variation is observed at least twice in the same location. The test current should follow the

value given in Table-2 unless otherwise limited by the power rating.

Oscilloscope

Standard Total

Resistance R (ohm)

Rx

#3

#1

Test Current

3

Contact Resistance

#2

Proofread

Resistence

Constant Current

Source

(Test current

shown in Table 2)

100VRF10k

10kVRF100k

100kVR

10mA max.

1mA max.

100µA max.

AC

Amplifier

Table 2: Test current for CRV

Rx : Trimmer Potentiometer

Oscilloscope bandwidth :100Hz to 50kHz

Figure 1: CRV measuring circuit

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 40±2°C and 90 - 95% without loading for 500±12 hours.

The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.

4

5

Humidity Exposure

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 70±2°C without loading for 500±12 hours. The resistance value should be

measured after keeping the potentiometer in a room for 1.5±1/6 hours.

High Temperature

Exposure

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 40±2°C and 90 - 95% with loading the 1/2 rated voltage between #1 and

#2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12hours.

Humidity Load Life

Load Life

6

7

The resistance value should be measured after keeping the potentiometer in a room for 5±1/6 hours.

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be placed in a chamber at 70±2°C (50±2°C for PVZ) with loading the 1/2 rated voltage between #1

and #2 terminals, intermittently 1.5 hours ON and 0.5 hours OFF for 1000±12 hours. The resistance value should be

measured after keeping the potentiometer in a room for 1.5±1/6 hours.

The wiper contact point should be preset at about 50% position of effective rotational angle. After that, the poten-

tiometer should be subjected to Table 3,Table 4 temperature for 5 cycles. The resistance value should be measured

after keeping the potentiometer in a room for 1.5±10 minutes.

8

Temperature Cycle

Sequence

1

2

3

4

Sequence

1

2

3

4

Temp. (°C) -25±3 +25±2 +85±3 +25±2

Time (min.) 30±3 10max. 30±3 10max.

Temp. (°C) -55±3 +25±2 +125±3 +25±2

Time (min.) 30±3 10max. 30±3 10max.

Table 4: PVA3/PVS3/PVM4A---C01

Table 3: PVZ

9

Continued on the following page.

1

77

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

S

M

p

D

ec

O

if

p

ic

e

a

n

t

T

io

y

n

pe

s

a

n

d

S

T

M

e

D

st

S

M

ea

e

leth

d

o

T

d

y

s

pe PVM4A_C01 Series Specifications and Test Methods

Continued from the preceding page.

No.

Item

Test Methods

The trimmer potentiometer should be subjected to each of the following temperatures (see Table 5, Table 6) for 30

to 45 minutes. The resistance value should be measured in the chamber.

R²– R1

R1 (T2 – T1)

TCR=

Z 10⁶(ppm/°C)

T¹: Reference temperature in degrees celsius

T²: Test temperature in degrees celsius

R¹: Resistance at reference temperature in ohm

R²: Resistance at test temperature in ohm

Temperature Coefficient of

Resistance

9

Sequence

1*

2

3*

4

Sequence

1

2

3*

4

Temp. (°C) +25±2 -25±3 +25±2 +85±3

Note*: Norm temp.

Temp. (°C) +25±2 -55±3 +25±2 +125±3

Table 6: PVA3/PVS3/PVM4A---C01

Table 5: PVZ

The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per

minute, for 10 cycles continuously. The resistance value should be measured after keeping the potentiometer in a

room for 10±5 minutes.

10 Rotational Life

9

78

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

SpecificatioSnMs DanSdeTaelesdt MTyeptheo/Ldesad Sealed Type Specifications and Test Methods

The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (Military specification

for variable resistors, non-wirewound) and MIL-STD-202 (Test methods for electronic and electrical component parts).

No.

Item

Test Methods

Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned

against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance

measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements.

This voltage should be used for all subsequent total resistance measurements.

Total Resistance,

Nominal (ohm)

Maximum Test

Voltage (V)

1

Total Resistance

10VRV100

100FRV1k

1kFRV10k

10kFRV100k

100kFR

1.0

3.0

10.0

30.0

100.0

Table 1: Total resistance test voltage

Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance

between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme clock-

wise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end ter-

minal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not

exceeded.

2

Residual Resistance

Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The

adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational

angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a

contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points

where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the

adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum

to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by

power rating.

Standard Total Resistance

Oscilloscope

Rx

Test Current

#3

#1

R (ohm)

Contact Resistance

Variation

3

RV100

20mA

10mA

4mA

2mA

1mA

200µA

100µA

50µA

30µA

#

2

Constant Current Source

(Test current shown in Table2)

100FRF500

500VRF1k

1kVRF2k

2kVRF50k

50kVRF200k

200kVRF1M

1MVRF2M

2MVR

Proofread

Resistance

AC

Amplifier

Rx : Trimmer Potentiometer

Oscilloscope bandwidth :100Hz to 50kHz

Figure 1: CRV measuring circuit

Table 2: Test current for CRV

The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45 min-

utes. Temperature coefficient of resistance should be applied to the following formula.

R²– R1

R1 (T2 – T1)

TCR=

Z 10⁶(ppm/°C)

T¹: Reference temperature in degrees celsius

T²: Test temperature in degrees celsius

R¹: Resistance at reference temperature ohm

R²: Resistance at test temperature in ohm

Temperature Coefficient of

Resistance

4

Sequence

Temperature (°C)

1*

2

3

4*

5

6

Min. operating

Temperature

Max. operating

Temperature

+25

-15

+25

+65

Note*: Reference temperature

Table 3: Test temperatures

The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An

adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1

and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the

following formula.

E

e'

E

e

E

9

Voltage Setting

Stability

Voltage setting stability=

e : Before test

–

Z100 (%)

(

)

5

#1

#3

(The voltage between terminal #1 and terminal #2)

e': After test

#2

e

(The voltage between terminal #1 and terminal #2)

E: The voltage between terminal #1 and terminal #3

Figure 2

Continued on the following page.

1

79

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

SMpeDciSfiecaalteiodnTsyapned/LTeaedstSMeeatlhedodTsype Specifications and Test Methods

Continued from the preceding page.

No.

Item

Test Methods

The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer

should be removed from the chamber, and maintained at a temperature of 25±5°C for 1~2 hours.

Sequence

1

2

3

4

+125±3

+25±2 +150±3 +25±2

+60±3

PV-- series

PV22 series

PVF2 series

Temp.

(°C)

-55±3

6

Temperature Cycle

-25±3

30

Time (min.)

5 max.

30

5 max.

Table 4: One cycle of temperature cycle.

1) PVC6, PV12, PV32, PV34 PVM4A---D01 series

The trimmer potentiometer should be placed in a chamber at a temperature of 40±2°C and a humidity of 90~95%

without loading for 250±8 hours (500±12 hours for PVM4A---D01 series). The trimmer potentiometer should be

removed from the chamber, and maintained at a temperature of 25±5°C for 5±1/6 hours.

2) PVF2 series

The trimmer potentiometer should be placed in a chamber at 60±2°C and 90~95% without loading for 1000±12

hours. The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C

for 5±1/6 hours

2) PVG3, PVG5, PV01, PV22, PV23, PV36, PV37 series

The trimmer potentiometer should be subjected Figure-3 the programmed humidity environment for 10 cycle. The trim-

mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1.5±1/2

hours.

MIL-STD-202 METHOD 106

80-98%RH

70

65

60

55

50

45

40

35

30

25

20

90-98%RH

INITIAL CONDITIONING

IN A DRY OVEN

24 HOURS

RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.

HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED

TO RADIANT HEAT FROM CHAMBER-CONDITIONING

PROCESSES

7

Humidity

HUMIDITY

UNCONTROLLED

END OF FINAL CYCLE

MEASUREMENTS AS

SPECIFIED IN 3.6

+10°C

-2°C

CIRCULATION OF CONDITIONING AIR SHOULD

BE AT A MINIMUM CUBIC RATE PER MINUTE

EQUIVALENT TO 5 TIMES THE VOLUME OF

THE CHAMBER

INITIAL MEASUREMENTS

15 AS SPECIFIED IN 3.2

10

5

VOLTAGE APPLIED AS SPECIFIED IN 3.5

0

UNLESS OTHERWISE SPECIFIED

TEMPERATURE TOLERANCE IS,

-5

STEPS 7a AND 7b PERFORMED DURING ANY

5 OF THE FIRST 9 CYCLES. HUMIDITY

UNCONTROLLED DURING STEPS 7a AND 7b

ONLY

-10 ±2°C AT ALL POINTS WITHIN THE

STEP 7b

STEP 7a

CHAMBER EXCEPT THE IMMEDIATE

VICINITY OF THE SPECIMENS AND

THE CHAMBER SURFACES

PRIOR TO FIRST CYCLE

UNLESS OTHERWISE

SPECIFIED

STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6

STEP 7

ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN 3.3

0

1

2

3

4

5

6

7

8

9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24

Figure 3

1) PV-- series

The trimmer potentiometer should be vibrated throughout the frequency range at the 20G level. A complete frequen-

cy range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the three

axis direction for a total of 12 sweeps.

8

9

Vibration

2) PVF2 series

The trimmer potentiometer should be subjected to vibration at 0.3 inch amplitude. The frequency should be varied

uniformly between the approximate limits of 10Hz and 55Hz. This motion should be applied for period of 2 hours in

each of 3 mutually perpendicular directions (total of 6 hours).

1) PV-- series

The trimmer potentiometer should be shocked at the 100G (50G for PV22 and PV23 series) level and should be

subjected to 4 shocks in each of the three axis directions for a total of 12 shocks.

2) PVM4A---D01 series

Shock

The trimmer potentiometer should be shocked at the 100G level and should be subjected to 3 shocks in each of the

six axis directions for a total of 18 shocks.

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied intermittently

between terminal #1 and terminal #3 of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of

1000±12 hours, at a temperature of 70±2°C (85±2°C for PV01 and PV37 series, 50±2°C for PVF2 series). The trim-

mer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for 1 to 2 hours.

10 Temperature Road Life

9

The trimmer potentiometer should be placed in a chamber at a temperature of 125±3°C (150±3°C for PV22 series)

250±8 hours without loading. The trimmer potentiometer should be removed from the chamber, and maintained at a

temperature of 25±5°C for 1 to 2 hours.

High Temperature Exposure

(Except for PVF2)

11

The trimmer potentiometer should be placed in a chamber at a temperature of -55±3°C for 1 hours without loading.

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied for 45 minutes.

The trimmer potentiometer should be removed from the chamber, and maintained at a temperature of 25±5°C for

approximately 24 hours.

Low Temperature Exposure

(Except for PVF2 and

PVM4A---D01)

12

Continued on the following page.

80

1

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

SpecificatioSnMs DanSdeTaelesdt MTyeptheo/Ldesad Sealed Type Specifications and Test Methods

Continued from the preceding page.

No.

13

Item

Test Methods

Low Temperature Operation

(Only for PVF2 and

PVM4A---D01)

The trimmer potentiometer should be placed in a chamber at a temperature of -25±3°C (-55±3°C for PVM4A---

D01 series) 48±4 hours without loading. The trimmer potentiometer should be removed from the chamber, and main-

tained at a temperature of 25±5°C for 1-2 hours

1)PV-- series

Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit

shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of effec-

tive-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maxi-

mum for total of 200 cycles.

Resistor 1

Resistor 2

End Terminal

14 Rotational Life

DC supply

Figure 4

2) PVG3, PVG5 series

The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical rotation-

al angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total of 50

(100 for PVG5) cycles, without loading.

3) PVF2, PVM4A---D01 series

The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per

minute, for 100 cycles continuously.

9

81

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Angle Sensing Potentiometer Specifications and Test Methods

Test Methods

No.

Item

Independent linearity should vary no more than ±2% within ±160° to 50% voltage ratio.

Taper : linear, 100%/333.3° Measured with the circuit as below (Figure 1).

100%

Guarantee limit for linearity

DC5V (#3)

GND (#1)

Output voltage ratio (%)

V (1-2)

V (1-3)

50%

0%

Connection Impedance : 1M ohm min.

Output (#2)

X100

1

Linearity

100% / 333.3°

-160°

0°

Rotational angle (°)

+160°

CCW

CW

Figure-1

The rotary position sensor should be subjected to each of the following temperatures (see Table 1) for 30-45 minutes.

Temperature coefficient of resistance should be applied to the following formula.

R²– R1

R1 (t2 – t1)

TCR=

Z 10⁶(ppm/°C)

t¹: Reference temperature in degrees celsius

t²: Test temperature in degrees celsius

R¹: Resistance at reference temperature in ohm

R²: Resistance at test temperature in ohm

Temperature

Coefficient of

Resistance

2

Sequence

*1

2

*3

4

Temperature (°C)

+25

-40

+25

+85

Note * : Reference temperature

Table-1 Test temperatures

The rotary position sensor should be subjected to Table 2 temperature for 5 cycles.

Then, the rotary position sensor should be kept in the dry box for 24 +8/-0 hrs.

Temperature

Cycle

(Thermal Shock)

Sequence

Temperature (°C)

Time (min.)

1

2

3

4

3

-40±3

30

+25±2

5 max.

+85±3

30

+25±2

5 max.

Table 2: One cycle of temperature cycle

The rotary position sensor should be stored in a chamber at temperature of +60±2°C and relative Humidity of 90-95% for 250±8

hrs. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.

4

5

Humidity

Vibration

The rotary position sensor should be tested under the condition of the amplitude of 1.5mm, the frequency range from 10 to 55Hz

(should be traversed in approximately one minute) and 2 hours in each of 3 mutually perpendicular directions (total 6 hours).

Then, the rotary position sensor should be kept in the dry box for 1-2 hrs.

The rotary position sensor should be tested under the condition of the peak acceleration 20G max. in half-sine wave and 5 shocks

in each of 3 mutually perpendicular directions (total 15 shocks). Then, the rotary position sensor should be kept in the dry box for

1-2 hrs.

6

7

Shock

Full rated continuous working voltage not exceeding 5Vdc should be applied intermittently between terminal #1 and terminal #3 of

the rotary position sensor, 1.5 hours on and 0.5 hours off, for 96±4 hours in total in a chamber at a temperature of +40±2°C and

relative humidity of 90-95%. After removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-

0 hours.

Humidity Load

Life

High Temp.

Exposure

The rotary position sensor should be stored in a chamber at the temperature of +85±3°C without loading for 250±8 hours. After

removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.

8

9

Low Temp.

Exposure

The rotary position sensor should be stored in a chamber at the temperature of -40±3°C without loading for 168±4 hours. After

removing from the chamber, the rotary position sensor should be kept in the dry box for 24 +8/-0 hours.

The adjustment rotor should be continuously rotated within ±160° of effective electrical rotational angle, at the rate of one cycle for

6 seconds for 1 Million cycles under the condition of +25±2°C of temperature without loading.

10 Rotational Life

9

82

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Packaging

■ Minimum Quantity

Minimum Quantity (pcs.)

Part Number

Bulk

1000

500

—

ø330mm reel

Ammo Pack

Magazine

—

Tray

—

1000

ø180mm reel

3000

2000

1500

2500

2000

1000

500

250

500

—

12000

—

PVZ2A

PVZ2K

PVZ3A

PVZ3K/R

PVS3

—

8000

—

8000

—

PVA3

—

PVG3A/G

PVG3K

PVM4

—

500

100

50

3000

—

PVF2A

PVG5A

PVG5H

PV01W

PV01P

—

50

—

50

—

PV01X

—

50

PVC6A/D/G/H/E

PVC6M/Q

PV34

—

1000

—

50

—

100

50

—

PV32

—

PV23/12

PV22

—

30

—

1000

—

50

40

—

50

PV36W

PV36Y

—

50

—

1000

—

50

PV36X

—

50

PV36Z/P

PV37Y/Z

PV37W/X/P

PVS1A

PVS1L

—

1000

—

50

—

50

—

1000

—

50

—

■ Dimensions of Reel

13.0±0.5 dia.

21.0±0.8 dia.

2.0±0.5

178±2 dia.

*

2.0±0.5 (PVG5A—1.0±0.5)

* 10.0±1.5 ( 8mm Width) — PVZ2A, PVZ3A, PVS3, PVA3, PVF2

9

14.0±1.5 (12mm Width) — PVG5H, PVG3, PVZ2K, PVZ3K, PVZ3R, PVM4

17.0±1.5 (16mm Width) — PVG5A

(in mm)

Continued on the following page.

83

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Packaging

Continued from the preceding page.

■ Dimensions of Reel

PVS1

13.0±0.5 Dia.

2.0±0.5

21.0±0.8 Dia.

2.0±0.5

25.5±1.0

328±2 Dia.

(in mm)

■ Dimensions of Plastic Tape

PVZ2 / PVZ3 / PVA3 / PVS3 / PVF2

2.0±0.1

+0.1

1.5

dia.

I

–0

4.0±

0.1

4.0±0.1

a

J

1.75±0.1

D

C

B

A

Across a – a'

a'

Tape feeding direction

Part Number

PVZ2A

A

B

C

D

I

J

3.1±0.1

5.7±0.1

3.8±0.2

5.8±0.2

6.5±0.2

4.1±0.2

2.3±0.2

8.0±0.2

12.0±0.1

8.0±0.2

3.5±0.1

5.5±0.1

3.5±0.1

0.2±0.1

0.3±0.1

0.2±0.1

2.4±0.1

1.1±0.1

PVZ2K

PVZ3A/PVA3

PVZ3K

PVZ3R

PVS3

1.95±0.1

2.3±0.1

2.1±0.1

1.6±0.1

2.3±0.1

3.3±0.2

2.3±0.2

12.0±0.2

8.0±0.2

5.5±0.1

3.5±0.1

0.3±0.1

0.2±0.1

0.3±0.1

PVF2

• The side containing terminals #1 and #3 faces the plastic tape pilot holes.

(in mm)

Continued on the following page.

9

84

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Packaging

Continued from the preceding page.

■ Dimensions of Plastic Tape

PVG3A / PVG3G / PVM4 / PVG5H

2.0±0.1

+0.1

–0

I

8.0±0.1

4.0±0.1

1.5

dia.

a

J

B

Across a – a'

a'

A

Tape feeding direction

Part Number

PVG3A

A

B

I

J

4.0±0.1

4.9±0.1

5.5±0.2

5.8±0.2

4.0±0.1

2.1±0.1

0.3±0.1

PVG3G

PVM4

4.5±0.2

5.4±0.2

2.15±0.1

4.0±0.1

0.3±0.1

0.4±0.1

PVG5H

• The side containing terminals #1 and #3 faces the plastic tape pilot holes

(except PVG3).

(in mm)

PVG5A

2.0±0.1

+0.1

–0

I

12.0±0.2

4.0±0.1 1.5

dia.

a

J

B

Across a – a'

a'

A

Tape feeding direction

Part Number

A

B

I

J

4.3±0.2

5.4±0.2

5.4±0.1

0.4±0.1

PVG5A

(in mm)

Continued on the following page.

9

85

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Packaging

Continued from the preceding page.

■ Dimensions of Plastic Tape

PVG3K

PVS1

3.5

4.0

4.0±0.1

0.4±0.05

2.8±0.1

0.3±0.1

+0.1

-0

2.0±0.05

1.5

Dia.

+0.1

-0

a

1.5

dia.

2.0±0.1

a

a'

8.0±0.1

Across a-a'

11.4

Across a-a'

4.0±0.1

a'

16.0

Tape feeding direction

(in mm)

(Tolerance: ±0.1)

Tape feeding direction

(in mm)

■ Dimensions of Radial Taping

PVC6M

PVC6Q

0.55W×3.2L×1.3D

6.9

12.7±1.0

6.9

0±2

3.2 Dia.

12.7±1.0

#2

0±2

B

B'

3-0.5 Dia.

#3

#1

2.5

3-0.5 Dia.

B

B'

A

A'

Across B-B'

2.5±0.5 2.5±0.5

Across B-B'

#1 #2 #3

A

A'

2.5±0.5 2.5±0.5

#1 #2 #3

6.35±0.70

4.0±0.1 Dia.

Across A-A'

(

12.7±0.3

Across A-A'

(

6.35±0.70

in mm

Tolerance : ±0.3

in mm

Tolerance : ±0.3

4.0±0.1 Dia.

12.7±0.3

)

PV37Y

PV37Z

12.7±1.0

0±2.0

6.4

0±2.0

6.4

3−0.4±0.1 Dia

B

B'

3−0.4±0.1 Dia

B

B'

A

A'

A

A'

#3 #2 #1

4.0±0.1 Dia.

6.35±0.70

2.5

6.35±0.70

2.5

12.7±0.3

2.5±0.5

Across A-A'

in mm

)

in mm

Tolerance : ±0.3

Across A-A'

(

)

Tolerance : ±0.3

Across B-B'

Continued on the following page.

9

86

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Packaging

Continued from the preceding page.

■ Dimensions of Radial Taping

PV36W

PV36X

12.7±1.0

0±2.0

9.6

0±2.0

9.6

3−0.5±0.1 Dia

B

B'

A

B

B'

A

A'

#3#2 #1

#3 #2 #1

6.35±0.70

4.0±0.1 Dia.

6.35±0.70

2.5

12.7±0.3

2.5

2.5±0.5

Across A-A'

in mm

Tolerance : ±0.3

in mm

Tolerance : ±0.3

Across A-A'

Across B-B'

(

)

(

)

■ Dimensions of Ammo Pack

T

3

1

T

(in mm)

■ Dimensions of Magazine Packaging

PV01

PVC6

9.0±0.5

+0

370

–1.0

+0

–1.0

413

9.8±0.5

PV36W/Y/X/Z

PV36P

+0

7.3±0.5

508

–1.0

11.5±0.5

508

–1.0

9

(in mm)

87

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.

!Note

Note

R50E13.pdf 04.6.11

Recommended Adjustment Tools/Qualified Standards

■ Recommended Adjustment Tools

Trimmer Potentiometer Series

Manufacturers

Model Number

KMDR090

MURATA Model Number

KMDR090

Blade

– Minus (round edge)

+ Cross

MURATA MFG.

PVZ2

VESSEL MFG.

No.9000+0Z30

No.9000+1.7Z30

SA-2225

KMDR150

PVZ2A_A04

VESSEL MFG.

KMDR080

+ Cross

PVZ3

PVA3

TORAY INDUSTRIES, INC.

VESSEL MFG.

KMDR070

– Minus (round edge)

+ Cross

No.9000+1.7Z30

SA-2225

KMDR080

TORAY INDUSTRIES, INC.

VESSEL MFG.

KMDR070

– Minus (round edge)

– Minus

SA-2225

KMDR070

PVS3

PVG3

PVM4

SA-2225

KMDR070

No.9000–2.6Z30

No.9000–1.3Z30

DA-54

KMDR120

VESSEL MFG.

KMDR130

– Minus

PVG5

PVC6

ENGINEER INC.

– Minus

VESSEL MFG.

No.9000+0Z30

SA-2225

KMDR150

KMDR070

KMDR110

KMDR180

+ Cross

TORAY INDUSTRIES, INC.

VESSEL MFG.

– Minus (round edge)

– Minus

No.9000–1.8Z30

DA-40

– Minus (both ends)

– Minus

others

ENGINEER INC.

DA-55

For Automatic Adjustment

Trimmer Potentiometer Series

Manufacturers

Model Number

MURATA Model Number

Blade

PVZ3

PVA3

PVS3

PVG3

TORAY INDUSTRIES, INC.

JB-2225

KMBT070

– Minus (round edge)

No.CA-10

JB-2225

KMBT090

KMBT070

+ Cross

VESSEL MFG.

PVC6

– Minus (round edge)

TORAY INDUSTRIES, INC.

■ Qualified Standards

The products listed here have been produced by the QS9000 and ISO9001 certified factory.

MURATA FACTORY

Qualified Date

Standard

Qualified Number

Sabae Murata Mfg.Co.,Ltd.

August 14, 1997

May 12, 1999

UNDERWRITERS LABORATORIES INC.

A5704

A7924

Wuxi Murata Electronis Co.,Ltd.

No ODCs (Ozone Depleting Chemicals) are used on all Murata's trimmer potentiometers.

9

88

Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this PDF catalog to prevent smoking and/or burning, etc.

This catalog has only typical specifications. Therefore, you are requested to approve our product specifications or to transact the approval sheet for product specifications before ordering.

!Note

R50E13.pdf 04.6.11

Note:

1. Export Control

For customers outside Japan

<

>

Murata products should not be used or sold for use in the development, production, stockpiling or utilization of any conventional weapons or mass-destructive

weapons (nuclear weapons, chemical or biological weapons, or missiles), or any other weapons.

For customers in Japan

<

>

For products which are controlled items subject to the “Foreign Exchange and Foreign Trade Law” of Japan, the export license specified by the law is required

for export.

2. Please contact our sales representatives or product engineers before using the products in this catalog for the applications listed below, which require especially

high reliability for the prevention of defects which might directly damage to a third party's life, body or property, or when one of our products is intended for use

in applications other than those specified in this catalog.

q Aircraft equipment

w Aerospace equipment

e Undersea equipment

t Medical equipment

u Traffic signal equipment

o Data-processing equipment

r Power plant equipment

y Transportation equipment (vehicles, trains, ships, etc.)

i Disaster prevention / crime prevention equipment

! Application of similar complexity and/or reliability requirements to the applications listed in the above

3. Product specifications in this catalog are as of April 2004. They are subject to change or our products in it may be discontinued without advance notice. Please

check with our sales representatives or product engineers before ordering. If there are any questions, please contact our sales representatives or product

engineers.

4. Please read rating and

CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.

5. This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please approve our product specifications or

transact the approval sheet for product specifications before ordering.

6. Please note that unless otherwise specified, we shall assume no responsibility whatsoever for any conflict or dispute that may occur in connection with the effect

of our and/or a third party's intellectual property rights and other related rights in consideration of your use of our products and/or information described or

contained in our catalogs. In this connection, no representation shall be made to the effect that any third parties are authorized to use the rights mentioned

above under licenses without our consent.

7. No ozone depleting substances (ODS) under the Montreal Protocol are used in our manufacturing process.

http://www.murata.com/

He a d O ffice

In te rn a tio n a l Divisio n

2-26-10, Tenjin Nagaokakyo-shi, Kyoto 617-8555, Japan Phone: 81-75-951-9111

3-29-12, Shibuya, Shibuya-ku, Tokyo 150-0002, Japan

Phone: 81-3-5469-6123 Fax: 81-3-5469-6155 E-mail: intl@murata.co.jp


型号：	PVZ3A205A01B00
厂家：	muRata
描述：	RESISTOR, TRIMMER, 1 TURN(S), 0.1W, 2000000ohm, CHIP 电阻器
文件：	总90页 (文件大小：1941K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PVZ3A205A01B00 [MURATA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E