PVZ3A221C01B00 [MURATA]
RESISTOR, TRIMMER, CARBON FILM, 1 TURN(S), 0.1W, 220ohm, ROHS COMPLIANT;
| 型号： | PVZ3A221C01B00 |
| 厂家： | 
muRata |
| 描述： | RESISTOR, TRIMMER, CARBON FILM, 1 TURN(S), 0.1W, 220ohm, ROHS COMPLIANT 电阻器 |
| 文件： | 总55页 (文件大小：1373K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Trimmer Potentiometers
Cat.No.R50E-18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
EU RoHS Compliant
s
All the products in this catalog comply with EU RoHS.
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
s
(http://www.murata.com/info/rohs.html).
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
1
CONTENTS
Part Numbering
2
3
Selection Guide of Trimmer Potentiometers
2
3
4
5
6
7
1
2
3
4
5
6
7
SMD Open Type 2mm Size PVZ2/PVA2 Series
PVZ2/PVA2 Series Notice
4
8
SMD Open Type 3mm Size PVZ3 Series
PVZ3 Series Notice
10
14
16
19
21
23
26
29
31
34
36
43
45
46
49
52
SMD Sealed Type 3mm Size PVG3 Series
PVG3 Series Notice
SMD Sealed Type 4mm Size PVM4 Series
PVM4 Series Notice
SMD Sealed Type Multi-turn PVG5 Series
PVG5 Series Notice
Lead Sealed Type Single-turn PV32 Series
PV32 Series Notice
Lead Sealed Type Multi-turn PV12/PV37/PV36 Series
PV12/PV37/PV36 Series Notice
SMD Open Type (PVZ2/A2/Z3)/SMD Sealed Type (PVM4A_C01 Series) Specifications and Test Methods
SMD Sealed Type (PVG3/M4A_D01/G5)/Lead Sealed Type (PV32/12/37/36) Specifications and Test Methods
Packaging
Recommended Adjustment Tools/Qualified Standards
s 4HE 2O(3 COMPLIANCE MEANS THAT WE JUDGE FROM %5 $IRECTIVE ꢀꢁꢂꢂꢃꢄꢅꢃ%5 THE PRODUCTS DO NOT CONTAIN LEADꢆ CADMIUMꢆ MERCURYꢆ HEXAVALENT
CHROMIUMꢆ 0"" AND 0"$%ꢆ EXCEPT EXEMPTIONS STATED IN %5 $IRECTIVE ꢀꢁꢂꢂꢃꢄꢅꢃ%5 ANNEX AND IMPURITIES EXISTING IN THE NATURAL WORLDꢇ
s 4HIS STATEMENT DOES NOT INSURE THE COMPLIANCE OF ANY OF THE LISTED PARTS WITH ANY LAWS OR LEGAL IMPERATIVES DEVELOPED BY ANY %5 MEMBERS
INDIVIDUALLY WITH REGARDS TO THE 2O(3 $IRECTIVEꢇ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
o Part Numbering
Trimmer Potentiometers
(Part Number)
PV Z3
A
103 C01 R00
q
w
e
r
t
y
qProduct ID
rTotal Resistance
Expressed by three figures. The unit is ohm. The first and second
figures are significant digits, and the third figure expresses the
number of zeros that follow the two figures.
Product ID
PV
Trimmer Potentiometers
wSeries
Ex.)
Code
100
Total Resistance
10Ω
eAdjustment Direction /Lead Type
102
1000Ω
Adjustment Direction/
Lead Type
Code
Series
Code
104
100000Ω (=100kΩ)
A
R
A
A
G
H
K
A
G
A
A
H
H
N
P
Top
Rear
SMD Open 2mm Size
Carbon Resistive Element
Z2
A2
tIndividual Specification
SMD Open 2mm Size
Top
Series
Code
Individual Specification Code
Top
Standard Type
PVA2
A01
Top
SMD Open 3mm Size
Carbon Resistive Element
Standard Type (High-heat Resistance
Type/Ultra-thin Type)
Z3
PVZ2
PVZ3
C04
Top
Rear
Standard Type (High-heat Resistance
Type/Top Adjustment)
C01
F01
E01
Top, J-hook
Top, Gull-wing
Top
G3
M4
G5
SMD Sealed 3mm Size
SMD Sealed 4mm Size
High Characteristic Carbon
Type (only PVZ3G)
Top
SMD Sealed 5mm Square
11 turns
High-heat Resistance Type
(for Rear Adjustment)
Side
Top, Triangle
Side, Triangle
Top, Triangle
Side, Triangle
Top, Inline
Side, Inline
Top, Triangle
Side, Triangle
Standard Type
High-reliability Type
Standard Type
C01
D01
A01
Lead Sealed 6mm Round
Single turn
32
12
36
37
PVM4
PV32/PV12
Lead Sealed 7mm Round
4 turns
T
PVG3/
PV36/PV37
Standard Type
Standard Type
C01
C03
W
X
Lead Sealed 10mm Square
25 turns
PVG5
W
X
Lead Sealed 6mm Square
12 turns
yPackaging
Code
B00
Packaging
Bulk
R00
Reel
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Selection Guide of Trimmer Potentiometers
Mounting Method
Surface Mount
Construction?
PCB Insertion Sealed Construction
Adjustment?
Open
Sealed
Top
Side
Carbon Resistive Element
Cermet Resistive Element
Cermet Resistive Element
Cermet Resistive Element
3mm size Single Turn
2mm size Single Turn
6mm size Single Turn
6mm size Single Turn
PVG3A
PVZ2A_C04
for Automatic Adjustment
with Rotational Stop
PV32H
PV32N
Low Profile (0.85mm max.)
with Rotational Stop
with Rotational Stop
PVZ2R
PVG3G
7mm size 4 Turns
7mm size 4 Turns
Rear Adjustment Low Profile with
Smaller Foot print (0.9mm max.)
with Rotational Stop
3mm size Single Turn
4mm size Single Turn
PV12P
PV12T
PVZ3A
PVM4
for Automatic Adjustment
6mm size 12 Turns
6mm size 12 Turns
5mm size 11 Turns
PVZ3G
Top Adjustment Low Profile
(1.25mm max.)
PV37W
PV37X
10mm size 25 Turns
PV36X
PVG5
PVZ3H
10mm size 25 Turns
PV36W
Top Adjustment
PVZ3K
Rear Adjustment
Cermet Resistive Element
2mm size Single Turn
PVA2
for Automatic Adjustment
(0.9mm max.)
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.2±,2012
1
Trimmer Potentiometers
SMD Open Type 2mm Size PVZ2/PVA2 Series
PVZ2 Series
2.1
0.8
#2
Features
c
0.8 0.0ꢀ
0.ꢀ
0.4
1. Ultra-small and thin external dimensions of
Soldering Part
2.4 Dia.
∗1
2.1(W)x2.7(L)x0.85 max. (T)mm.
(Top adjustment type: PVZ2A_C04 Series)
2. Ultra-small and thin external dimensions of
2.1(W)x4.8(L)x0.9 max. (T)mm.
(Rear adjustment type: PVZ2R_C04 Series)
Compact PCB design is possible by smaller
adjustment hole (±.0mm dia.) due to short wing
length (4.8mm).
#1
0.ꢀꢀ
#3
0.ꢀꢀ
#2
0.7
#1
#3
CLOCKWISE
∗1 Driver Plate Rotation Area:
Please do not place any components
more than 0.ꢀmm in height within this area.
PVZ2A
Tolerance: 0.2
±. Au plated termination achieves a high-density
PCB mounting.
(
)
in mm
4. Cross-shaped driver slot allows for in-process
automatic adjustment and it provides superior
adjustability.
+0.10
2.1
0.8
0.8
-
0.1ꢀ
#2
2.4 Dia.
∗1
5. Two-piece parts construction achieves low cost and
excellent quality.
6. Special resin substrate allows high peak temperature
for reflow soldering (PVZ2_Cxx Series).
7. PVZ2 series complies with RoHS directive.
Soldering
Part
#1
#3
0.6ꢀ 0.6 0.6ꢀ
#2
Applications
1. Pick-up module
c
#1
CLOCKWISE
#3
∗1: Driver Plate Rotation Area
PVZ2R
6. DVC
Tolerance : 0.2
in mm
2. LCD
7. Digital camera
8. Portable audio, etc.
9. RKE
(
)
±. Cellular phone
4. PHS
5. Pager
10. E-Book
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
(W)
PVZ2 471C04
p
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
0.05(50°C)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
1(240°±10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
470ohm±±0ꢀ
1k ohm±±0ꢀ
±500
±500
±500
±500
±500
±500
±500
±500
±500
±500
±500
PVZ2 102C04
p
PVZ2 222C04
p
2.2k ohm±±0ꢀ
4.7k ohm±±0ꢀ
10k ohm±±0ꢀ
22k ohm±±0ꢀ
47k ohm±±0ꢀ
100k ohm±±0ꢀ
220k ohm±±0ꢀ
470k ohm±±0ꢀ
1M ohm±±0ꢀ
PVZ2 472C04
p
PVZ2 103C04
p
PVZ2 223C04
p
PVZ2 473C04
p
PVZ2 104C04
p
PVZ2 224C04
p
PVZ2 474C04
p
PVZ2 105C04
p
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Construction
Standard Land Pattern
c
c
c
c
1
PVZ2A
PVZ2A
0.9
0.6
0.7
0.6
Tolerance : 0.1
in mm
(
)
Construction
Standard Land Pattern
c
PVZ2R
PVZ2R
0.9
#2-Terminal
Driver Plate
#1-Terminal
3.0 Dia.
Wiper
Resistive
Element
0.7 0.6 0.7
Tolerance : 0.1
in mm
Resin Substrate
(
)
#3-Terminal
Characteristics
Humidity Exposure
Res. Change: +10, -2%
<
High Temperature
Exposure
Res. Change: R 50kohm···+2, -10%
=
50kohm<R···+2, -15%
Humidity Load Life
Load Life
Res. Change: 10%
<
Res. Change: R 50kohm···+2, -10%
=
50kohm<R···+2, -15%
Temperature Cycle
Rotational Life
Res. Change: 5%
Res. Change: 10% (10 cꢀcles)
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
Rꢀ0E.pdf
Jul.23,2012
PVA2 Series
1
0.8 0.1
0.4
2.2
#2
Features
c
2.4 Dia
0.8
1. Ultra-small and thin external dimensions of
2.2(W)x2.7ꢀ(L)x0.90 max.(T)mm.
2. For the terminal attachment method of construction
that uses neither solder nor adhesives, good
solderability and terminal attachment intensity
are realized.
Resin
0.6 0.9 0.6
#1
#3
0.5
#2 (Wiper Contact)
#3
3. Because of multi-contact wiper structure, PVA2 has
a stable characteristics (low noise).
#1
CLOCKWISE
CIRCUIT
4. PVA2 series does not use a solder, flux or cleaning
solvent, so they are environmentally friendly
products.
Tolerance: 0.2
(
)
in mm
ꢀ. Heat resistance performance enables high temperature
peak reflow soldering.
6. PVA2 series complies with RoHS directive.
Applications
c
1. Thin-model optical pick-up module
2. LCD module
3. Optical communication module
4. Small sensor module
ꢀ. Digital camera
6. Small telecommunications equipment, etc.
7. E-Book
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVA2A101A01
PVA2A221A01
PVA2A471A01
PVA2A102A01
PVA2A222A01
PVA2A472A01
PVA2A103A01
PVA2A223A01
PVA2A473A01
PVA2A104A01
PVA2A224A01
PVA2A474A01
PVA2A105A01
PVA2A225A01
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
1(260° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
100ohm 2ꢀ5
220ohm 2ꢀ5
470ohm 2ꢀ5
1k ohm 2ꢀ5
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2.2k ohm 2ꢀ5
4.7k ohm 2ꢀ5
10k ohm 2ꢀ5
22k ohm 2ꢀ5
47k ohm 2ꢀ5
100k ohm 2ꢀ5
220k ohm 2ꢀ5
470k ohm 2ꢀ5
1M ohm 2ꢀ5
2.2M ohm 2ꢀ5
Operating Temperature Range: -ꢀꢀ to 12ꢀ °C
Soldering Method: Reflow/Soldering Iron
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Construction
Standard Land Pattern
c
c
1
Driver Plate
101
Wiper
#2-Terminal
#1-Terminal
Resistive Element
Ceramic Substrate
±07±
109±
Tolerance : ±±01
in mm
#3-Terminal
(
)
Characteristics
c
Humidity Exposure
Res0 Change: ±3ꢀ
High Temperature
Exposure
Res0 Change: ±3ꢀ
Humidity Load Life
Load Life
Res0 Change: ±3ꢀ
Res0 Change: ±3ꢀ
Temperature Cycle
Rotational Life
Res0 Change: ±3ꢀ
Res0 Change: ±1±ꢀ (1± cꢁcles)
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVZ2/PVA2 Series Notice
1
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. If the trimmer potentiometer is used in DC and high
humidity conditions, please connect wiper (#2) for
plus and resistive element (#1 or #3) for minus.
(PVZ Series only)
Notice (Soldering and Mounting)
c
1. Soldering
(5) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
(1) Reflow soldering method and soldering iron are
available. This product cannot be soldered using
the flow soldering method (dipping). If you use the
flow soldering method, the trimmer potentiometer
may not function.
2. Mounting
(1) Do not apply excessive force, preferably 4.9N
max. (Ref. 500gf) when the trimmer
potentiometer is mounted to the PCB.
(2) Do not warp and/or bend the PC board to protect
trimmer potentiometer from breakage.
(3) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 1.5-1.8mm dia. and inner dimension
1.3mm dia.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(3) Soldering conditions
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
(4) Apply the appropriate amount of solder paste.
The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the
dimension of land pattern used should be Murata's
standard land pattern at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
3. Cleaning
(1) In case there is flux on the resistive element,
clean sufficiently with cleaning solvents and
completely remove all residual flux.
(2) Isopropyl alcohol and ethyl alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
performance with your product.
Continued on the following page.
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVZ2/PVA2 Series Notice
1
Continued from the preceding page.
Soldering Profile
c
Reflow Soldering Profile
1. Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu)
T5
T3
T4
T2
T1
t2
t3
Limit Profile
Standard Profile
Time (s)
t1
Standard Profile
Heating
Limit Profile
Heating
Peak
Temperature
(T3)
Peak
Temperature
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
(T5)
Pre-heating
Pre-heating
Cycle of
Reflow
Cycle of
Series
Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
°C
sec.
°C
sec.
°C
Time
°C
sec.
°C
sec.
°C
Time
150 to 180 60 to 120
150 to 180 60 to 120
220
220
30 to 60
30 to 60
245 3
245 3
2
2
150 to 180 60 to 120
150 to 180 60 to 120
220
220
30 to 60
260
2
2
PVZ2
PVA2
30 to 60 260 +5/-0
2. Soldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to 1)
Standard Profile
Heating
T3
Peak
Temperature
(T3)
Pre-heating
Cycle of
Reflow
Series
T2
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
t2
T1
°C
sec.
°C
sec.
°C
Time
Standard Profile
PVZ2
PVA2
230
1
150
60 to 120
183
30
t1
time (s)
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
°C
Soldering Time
sec.
Soldering Iron Power Output
W
Cycle of Soldering Iron
Time
PVZ2
PVA2
350 10
3 max.
30 max.
1
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
Murata P/N: KMDR190
3. Please use within the effective rotational angle.
The trimmer potentiometer does not have a
mechanical stop for over rotation. In cases out of
effective rotational angle, the trimmer
2. The screwdriver should be set in the products
vertically, do not apply more than 4.9N (Ref. 500gf)
of twist and stress after mounting onto PCB to
prevent contact intermittence. If excessive force is
applied, the trimmer potentiometer may not function.
potentiometer may not function.
4. When using a lock paint to fix the slot position or
cover the rotor, please evaluate performance with
your product. Lock paint may cause corrosion or
electrical contact problems.
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Trimmer Potentiometers
SMD Open Type 3mm Size PVZ3 Series
2
PVZ3 Series
3.1
1.0
#2
1.15 Dia.
2.2 Dia.
1.85 0.1
Features
c
0.25 0.1
0.1 max.
3.0 Dia.
1. Excellent solderability characteristics are
achieved via special plating techniques on each
termination.
2. Specially designed substrate prevents wicking of
flux onto the top of the part body.
#1
#3
0.75
1.0
0.75
#2
3. Funnel shaped adjustment slot allows for in-process
automatic adjustment.
#1
CLOCKWISE
#3
PVZ3A
PVZ3H
PVZ3G
PVZ3K
(PVZ3A/PVZ3H/PVZ3K Series)
Tolerance: 0.3
4. High-heat resistance type is available
(PVZ3A_C01/PVZ3K_E01).
(
)
in mm
5. Enlarged bottom termination enhances soldering
strength while reducing the necessary land area
required, promoting high-density PCB mounting
(PVZ3A/PVZ3H/PVZ3G Series).
1.55
0.40
Soldering Part
0.25
6. The standard position of the driver plate is adjusted
at the center normally, but another position is also
available.
3.1
0.40
0.8
#2
7. This product meets PB-free standards.
8. Complies with RoHS directive.
Applications
c
1. Optical pick up
2. Cordless telephones
3. CD players
4. E-Book
6. CD-ROMs
#1
#3
in mm
Tolerance : 0.3
0.55
1.2
3.1
0.55
(
)
7. Car stereos
8. TFT-LCD TV sets
9. Headphone stereos
1.15 0.10
0.4
0.8
#2
5. Motor
#1
#3
0.55
0.55
1.2
#2 (Wiper Contact)
#3
#1
CLOCKWISE
CIRCUIT
Tolerance: 0.3
(
)
in mm
2.1
1.85±±.1
3.1
±.25±±.1
#2
#3
#1
Soldering Part
1.1
1.15 Dia.
2.2 Dia.
3.± Dia.
#2 (Wiper Contact)
#3
#1
CLOCKWISE
CIRCUIT
Tolerance: ±±.3
±.85 ±.9 ±.85
(
)
in mm
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Top Adjustment (H 1.85)
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
(W)
Mechanical Rotation Angle
Total Resistance Value
PVZ3A221C01
PVZ3A471C01
PVZ3A102C01
PVZ3A222C01
PVZ3A472C01
PVZ3A103C01
PVZ3A223C01
PVZ3A473C01
PVZ3A104C01
PVZ3A224C01
PVZ3A474C01
PVZ3A105C01
PVZ3A225C01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
2
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
Top Adjustment (H 1.55)
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
(W)
Mechanical Rotation Angle
Total Resistance Value
PVZ3H221C01
PVZ3H471C01
PVZ3H102C01
PVZ3H222C01
PVZ3H472C01
PVZ3H103C01
PVZ3H223C01
PVZ3H473C01
PVZ3H104C01
PVZ3H224C01
PVZ3H474C01
PVZ3H105C01
PVZ3H225C01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
Top Adjustment and Thin Type (H 1.15)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVZ3G221C01
PVZ3G471C01
PVZ3G102C01
PVZ3G222C01
PVZ3G472C01
PVZ3G103C01
PVZ3G223C01
PVZ3G473C01
PVZ3G104C01
PVZ3G224C01
PVZ3G474C01
PVZ3G105C01
PVZ3G225C01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Rear Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVZ3K221E01
PVZ3K471E01
PVZ3K102E01
PVZ3K222E01
PVZ3K472E01
PVZ3K103E01
PVZ3K223E01
PVZ3K473E01
PVZ3K104E01
PVZ3K224E01
PVZ3K474E01
PVZ3K105E01
PVZ3K225E01
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
0.1(50°C)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
1(230° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
220ohm 30ꢀ
470ohm 30ꢀ
1k ohm 30ꢀ
500
500
500
500
500
500
500
500
500
500
500
500
500
2.2k ohm 30ꢀ
4.7k ohm 30ꢀ
10k ohm 30ꢀ
22k ohm 30ꢀ
47k ohm 30ꢀ
100k ohm 30ꢀ
220k ohm 30ꢀ
470k ohm 30ꢀ
1M ohm 30ꢀ
2.2M ohm 30ꢀ
2
Operating Temperature Range: -25 to 85 °C
Soldering Method: Reflow/Soldering Iron
Construction
c
PVZ3A
Construction
Standard Land Pattern
c
c
PVZ3G
PVZ3A/PVZ3G/PVZ3H
1.1
Driver Plate
Wiper
#2-Terminal
Resistive
Element
#1-Terminal
Resin Substrate
#3-Terminal
1.0
0.7
1.0
Tolerance : 0.1
(
)
in mm
Construction
c
PVZ3H
Driver Plate
Wiper
1
#2 Terminal
#1 Terminal
4
Resistive Element
Resin Substrate
#3 Terminal
Continued on the following page.
12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Continued from the preceding page.
Construction
Standard Land Pattern
c
c
PVZ3K
PVZ3K
Driver Plate
#2-Terminal
1.5
#1-Terminal
2
Wiper
0.5
3.0
Resistive Element
(Carbon)
#3-Terminal
Tolerance : 0.1
in mm
(
)
Resin Substrate
Characteristics
c
Humidity Exposure
Res. Change: +10, -2%
<
High Temperature
Exposure
Res. Change: R 100kohm···+2, -10%
=
100kohm<R···+2, -15%
Humidity Load Life
Load Life
Res. Change: 10%
<
Res. Change: R 100kohm···+2, -10%
=
100kohm<R···+2, -15%
Temperature Cycle
Rotational Life
Res. Change: 5%
Res. Change: 10% (10 cꢀcles)
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVZ3 Series Notice
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
2
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
3. If the trimmer potentiometer is used in DC and high
humidity conditions, please connect wiper (#2) for
plus and resistive element (#1 or #3) for minus.
Notice (Soldering and Mounting)
c
1. Soldering
(4) The soldering iron should not come in contact with
the case of the trimmer potentiometer. If such
contact does occur, the trimmer potentiometer
may be damaged. (PVZ Series only)
2. Mounting
(1) Soldering conditions
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
Do not use flow soldering method (dipping).
If you use the flow soldering method, the
trimmer potentiometer may not function.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
(1) Do not apply excessive force, preferably 4.9N
max. (Ref. 500gf) when the trimmer potentiometer
is mounted to the PCB.
(2) Do not warp and/or bend the PC board to protect
trimmer potentiometer from breakage.
(3) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 2.5-2.8mm dia. and inner dimension
2mm dia.
3. Cleaning
(3) Apply the appropriate amount of solder paste.
The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the dimension
of land pattern used should be Murata's standard
land pattern at reflow soldering. Insufficient
amounts of solder can lead to insufficient
soldering strength on PCB.
(1) In case there is flux on the resistive element,
clean sufficiently with cleaning solvents and
completely remove all residual flux.
(2) Isopropyl alcohol and ethyl alcohol are
applicable solvents for cleaning. If you use any
other types of solvents, please evaluate
performance with your product.
Excessive amounts of solder may cause bridging
between the terminals.
Continued on the following page.
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVZ3 Series Notice
Continued from the preceding page.
Soldering Profile
c
Reflow Soldering Profile
1. Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu)
T5
T3
T4
T2
2
T1
t2
t3
Limit Profile
Standard Profile
Time (s)
t1
Standard Profile
Heating
Limit Profile
Heating
Peak
Temperature
(T3)
Peak
Temperature
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
(T5)
Pre-heating
Pre-heating
Cycle of
Reflow
Cycle of
Series
Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
°C
sec.
°C
sec.
°C
Time
°C
sec.
°C
sec.
°C
Time
PVZ3
150 to 180 60 to 120
220
30 to 60
245 3
2
150 to 180 60 to 120
220
30 to 60
260
2
2. Soldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to 1)
Standard Profile
Heating
T3
Peak
Temperature
(T3)
Pre-heating
Cycle of
Reflow
Series
T2
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
t2
T1
Standard Profile
°C
sec.
°C
sec.
°C
Time
PVZ3
150
60 to 120
183
30
230 max.
1
t1
Time (s)
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
Soldering Time
sec.
Soldering Iron Power Output
Cycle of Soldering Iron
°C
W
Time
PVZ3
350 10
3 max.
30 max.
1
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
>VESSEL MFG.: NO.9000+1.7x30
3. Please use within the effective rotational angle.
Do not have a mechanical stop for over rotation.
In cases out of effective rotational angle,
the trimmer potentiometer may not function.
4. When using a lock paint to fix the slot position or
cover the rotor, please evaluate performance with
your product. Lock paint may cause corrosion or
electrical contact problems.
(Murata P/N: KMDR080)
* Recommended screwdriver for automatic adjustment
>TORAY MFG.: JB-2225 (Murata P/N: KMBT070)
2. Don't apply more than 4.9N (Ref.; 500gf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Trimmer Potentiometers
SMD Sealed Type 3mm Size PVG3 Series
3.6
Features
c
2.0
0.4ꢀ
0.4 Depth
1. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
2. Driver plate with cross-slot is suitable for
automatic adjustment.
#2
0.1 Min.
0.6
#3
#1
2.3
3. Rotor with large diameter and deep groove improves
driver insertion.
1.00 0.1ꢀ
3
4. 3mm and 4mm land pattern can be used without change.
(Gull-wing is suitable for 4mm size land pattern.)
5. Heat resistance performance enables high
temperature peak reflow soldering.
#2
#1
CLOCKWISE
#3
PVG3A
0.7ꢀ 0.1ꢀ
Tolerance : 0.3
in mm
(
)
6. Complies with RoHS directive by new Cd free cermet
resistive material. Pb free terminals with
Sn plating.
3.6
2.0
0.4ꢀ
0.4 Depth
#2
Applications
1. Small sensors
c
0.1 Min.
5. Compact Power Supply
2. Optical Transceiver Module 6. Wireless Radio module
#3
#1
2.3
3. Copier
4. Printer
7. Corner Sensor
8. E-Book
1.00 0.1ꢀ
#2
#1
CLOCKWISE
#3
PVG3G
0.7ꢀ 0.1ꢀ
Tolerance : 0.3
in mm
(
)
Top Adjustment (Standard Type)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVG3A100C01
PVG3A200C01
PVG3A500C01
PVG3A101C01
PVG3A201C01
PVG3A501C01
PVG3A102C01
PVG3A202C01
PVG3A502C01
PVG3A103C01
PVG3A203C01
PVG3A503C01
PVG3A104C01
PVG3A204C01
PVG3A504C01
PVG3A105C01
PVG3A205C01
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
10ohm 20ꢀ
20ohm 20ꢀ
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50ohm 20ꢀ
100ohm 20ꢀ
200ohm 20ꢀ
500ohm 20ꢀ
1k ohm 20ꢀ
2k ohm 20ꢀ
5k ohm 20ꢀ
10k ohm 20ꢀ
20k ohm 20ꢀ
50k ohm 20ꢀ
100k ohm 20ꢀ
200k ohm 20ꢀ
500k ohm 20ꢀ
1M ohm 20ꢀ
2M ohm 20ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Reflow/Soldering Iron
16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Top Adjustment (Gull-Wing Type)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVG3G100C01
PVG3G200C01
PVG3G500C01
PVG3G101C01
PVG3G201C01
PVG3G501C01
PVG3G102C01
PVG3G202C01
PVG3G502C01
PVG3G103C01
PVG3G203C01
PVG3G503C01
PVG3G104C01
PVG3G204C01
PVG3G504C01
PVG3G105C01
PVG3G205C01
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
1(210° 10°)
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
250+/-10 deg.
10ohm 20ꢀ
20ohm 20ꢀ
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50ohm 20ꢀ
100ohm 20ꢀ
200ohm 20ꢀ
500ohm 20ꢀ
1k ohm 20ꢀ
2k ohm 20ꢀ
5k ohm 20ꢀ
10k ohm 20ꢀ
20k ohm 20ꢀ
50k ohm 20ꢀ
100k ohm 20ꢀ
200k ohm 20ꢀ
500k ohm 20ꢀ
1M ohm 20ꢀ
2M ohm 20ꢀ
3
Operating Temperature Range: -55 to 125 °C
Soldering Method: Reflow/Soldering Iron
Construction
c
PVG3A/PVG3G
Rotor
Cover
2
#2-Terminal
Case
M
#3-Terminal
Wiper
Resistive
Element
Ceramic
Substrate
O-Ring
#1-Terminal
Standard Land Pattern
c
PVG3A
PVG3G
1.4
1.4
1.1
1.2
1.1
1.1
1.2
1.1
Tolerance : 0.1
in mm
Tolerance : 0.1
in mm
(
)
(
)
17
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Characteristics
c
ΔTR
ΔV.S.S.: 1ꢀ
: 2ꢀ
Temperature Cycle
ΔTR 2ꢀ
:
Humidity
ΔV.S.S.: 1ꢀ
IR
: 10M ohm min.
ΔTR
ΔV.S.S.: 1ꢀ
: 1ꢀ
Vibration (20G)
ΔTR 1ꢀ
ΔV.S.S.: 1ꢀ
:
Shock (100G)
ΔTR 3ꢀ or 3 ohm maꢁ.ꢂ ꢃhichever is greater
ΔV.S.S.: 1ꢀ
:
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life
ΔTR 2ꢀ
:
ΔV.S.S.: 2ꢀ
3
ΔTR 3ꢀ
:
ΔV.S.S.: 2ꢀ
...
...
ΔTR : RV100 kohm
3ꢀ or 2 ohm maꢁ.ꢂ ꢃhichever is greater
RG100 kohm +0/-10ꢀ (50 cycles)
ΔTR : Total Resistance Change
ΔV.S.S.: Voltage Setting Stability
IR
R
: Insulation Resistance
: Standard Total Resistance
18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVG3 Series Notice
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
3
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
Notice (Soldering and Mounting)
c
1. Soldering
2. Mounting
(1) Soldering conditions
(1) Use our standard land dimension. Excessive land
area causes displacement due to the effect of the
surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
Refer to the temperature profile.
If the soldering conditions are not
suitable, e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
(2) This product cannot be soldered using the flow
soldering method. If you use the flow soldering
method, the trimmer potentiometer may not
function.
(2) Do not apply excessive force, preferably 4.9N
max. (Ref. 500gf) when the trimmer potentiometer
is mounted to the PCB.
(3) Do not warp and/or bend the PC board to protect
trimmer potentiometer from breakage.
(4) In chip placers, the size of the cylindrical
pick-up nozzle should be outer dimension
2.5-3.0mm dia. and inner dimension
2.0-2.5mm dia.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
(4) Apply the appropriate amount of solder paste.
If the amount of solder paste applied to the
land is insufficient, the required adhesive
strength cannot be obtained. If an excessive
amount of solder paste is applied, solder
bridging or flux overflow to the resistive
element surface can occur.
3. Cleaning
Isopropyl alcohol and ethyl alcohol are applicable
solvents for cleaning. If you use any other types
of solvents, please consult with a Murata factory
representative prior to using.
Continued on the following page.
19
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVG3 Series Notice
Continued from the preceding page.
Soldering Profile
c
Reflow Soldering Profile
1. Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu)
T5
T3
T4
T2
T1
t2
t3
Limit Profile
Standard Profile
3
Time (s)
t1
Standard Profile
Heating
Limit Profile
Heating
Peak
Temperature
(T3)
Peak
Temperature
(T5)
Pre-heating
Pre-heating
Cycle
Cycle
Series
of Reflow
of Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
°C
sec.
°C
sec.
°C
Time
°C
sec.
°C
sec.
°C
Time
PVG3
150 to 180 60 to 120
220
30 to 60
245 3
1
150 to 180 60 to 120
230
30 to 50
260 +5/-0
2
2. Soldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to 1)
Standard Profile
Heating
T3
T2
Peak
Temperature
(T3)
Pre-heating
Cycle
Series
of Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
t2
T1
°C
sec.
°C
sec.
°C
Time
Standard Profile
PVG3
150
60 to 120
183
30
230
1
t1
Time (s)
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
Soldering Time
Soldering Iron Power Output
Cycle of Soldering Iron
°C
sec.
W
Time
PVG3
350 10
3 max.
30 max.
1
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
2. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref. 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
driver slot.
* Recommended screwdriver for manual adjustment
TORAY INDUSTRIES, INC.: SA-2225
(Murata P/N: KMDR070)
* Recommended screwdriver bit for automatic
adjustment
3. The rotational torque at the position of the
adjustment range should not exceed the stop
strength.
TORAY INDUSTRIES, INC.: JB-2225
(Mutata P/N: KMBT070)
4. When using a lock paint to fix the slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series") and evaluate
performance with your product. Lock paint may
cause corrosion or electrical contact problems.
We can supply the screwdrivers above.
If you place an order, please specify the Murata P/N.
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your specifications
when our product is mounted to your product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
20
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
Rꢀ0E.pdf
Jul.23,2012
Trimmer Potentiometers
SMD Sealed Type 4mm Size PVM4 Series
2.0 0.2
4.0
#2
1.5ꢀ ia.
3.8ꢀ ia.
Features
c
0.7
1. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
2. Available for flow and reflow soldering methods
while maintaining unique sealed construction.
3. Simple construction of 3-piece parts achieves high
reliability.
#1
#3
0.55 0.1
0.35 0.1ꢀ Dept
0.75
1.7
0.6
#2
4. Large diameter slot of rotor improves driver
insertion.
#1
CLOCKWISE
#3
ꢀ. Available for cleaning after soldering.
6. High grade version is available (PVM4AxxxD01).
7. Complies with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
TolDrancDꢀ:ꢀ 0.3ꢀꢀ
1.8
0.85
0.85
(ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
)
inꢀmm
4
Applications
c
1. Security
ꢀ. Encoders
6. Sensors
7. RKE
2. OA, FA equipment
3. Measuring equipment
4. Professional cameras
Top Adjustment (Standard Type)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVM4A101C01
PVM4A201C01
PVM4A501C01
PVM4A102C01
PVM4A202C01
PVM4A502C01
PVM4A103C01
PVM4A203C01
PVM4A503C01
PVM4A104C01
PVM4A204C01
PVM4A504C01
PVM4A105C01
PVM4A205C01
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
0.1(70°C)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
100ohm 2ꢀ5
200ohm 2ꢀ5
ꢀ00ohm 2ꢀ5
1k ohm 2ꢀ5
2k ohm 2ꢀ5
ꢀk ohm 2ꢀ5
10k ohm 2ꢀ5
20k ohm 2ꢀ5
ꢀ0k ohm 2ꢀ5
100k ohm 2ꢀ5
200k ohm 2ꢀ5
ꢀ00k ohm 2ꢀ5
1M ohm 2ꢀ5
2M ohm 2ꢀ5
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
2ꢀ0
Operating Temperature Range: -ꢀꢀ to 12ꢀ °C
Soldering Method: Flow/Reflow/Soldering Iron
21
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
Rꢀ0E.pdf
Jul.23,2012
Top Adjustment (High-Liability Type)
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PVM4A101D01
PVM4A201D01
PVM4A501D01
PVM4A102D01
PVM4A202D01
PVM4A502D01
PVM4A103D01
PVM4A203D01
PVM4A503D01
PVM4A104D01
PVM4A204D01
PVM4A504D01
PVM4A105D01
PVM4A205D01
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
0.2ꢀ(70°C)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
1(240° 10°)
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
Endless
100ohm 205
200ohm 205
ꢀ00ohm 205
1k ohm 205
2k ohm 205
ꢀk ohm 205
10k ohm 205
20k ohm 205
ꢀ0k ohm 205
100k ohm 205
200k ohm 205
ꢀ00k ohm 205
1M ohm 205
2M ohm 205
100
100
100
200
200
200
1ꢀ0
1ꢀ0
1ꢀ0
1ꢀ0
1ꢀ0
1ꢀ0
1ꢀ0
1ꢀ0
Operating Temperature Range: -ꢀꢀ to 12ꢀ °C
Soldering Method: Flow/Reflow/Soldering Iron
4
Construction
Standard Land Pattern
1.7
c
c
Rotor
#2 Terminal
Wiper
Rubber
Ceramic
Substrate
#1 Terminal
Resistive
Element
Tolerance : ±±.1
in mm
1.1
1.6
1.1
(
)
#3 Terminal
Characteristics
c
Item
PVM4ApppC01
PVM4ApppD01
Humidity Exposure
Res. Change: ±3ꢀ
Res. Change: ±2ꢀ
Res. Change: ±2ꢀ
Res. Change: ±3ꢀ
Res. Change: ±3ꢀ
Res. Change: ±2ꢀ
High Temperature Exposure
Humidity Load Life
Temperature Load Life
Temperature Cycle
Rotational Life
Res. Change: ±3ꢀ
Res. Change: ±3ꢀ
Res. Change: ±3ꢀ
Res. Change: ±3ꢀ
Res. Change: ±1±ꢀ (2± cꢁcles)
Res. Change: ±ꢂꢀ (1±± cꢁcles)
22
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVM4 Series Notice
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
4
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
Notice (Soldering and Mounting)
c
1. Soldering
(5) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
(1) Can be soldered by reflow soldering method, flow
soldering method, and soldering iron.
(2) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering
strength of the chip.
2. Mounting
(1) Do not apply excessive force, preferably 9.8N
max. (Ref. 1kgf) when the trimmer potentiometer
is mounted to the PCB.
(3) Soldering conditions
(2) Do not warp and/or bend the PC board to protect
trimmer potentiometer from breakage.
(3) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 4.0mm dia. and inner dimension 2.0mm
dia.
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive temperature,
the trimmer potentiometer may deviate from the
specified characteristics.
(4) Apply the appropriate amount of solder paste.
The thickness of solder paste should be printed
from 100 micro m to 150 micro m and the
dimension of land pattern used should be Murata's
standard land pattern at reflow soldering.
Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
3. Cleaning
Isopropyl alcohol and ethyl alcohol are available
materials for cleaning.
For other materials, please consult with a Murata
factory representative prior to using.
Continued on the following page.
23
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVM4 Series Notice
Continued from the preceding page.
Soldering Profile
c
Flow Soldering Profile
Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
t2
Limit Profile
Heating
T1
Standard Profile
Time (s)
t1
Pre-heating
Standard Profile
Limit Profile
Heating
Pre-heating
Heating
Pre-heating
Cycle
Cycle
Series
of Flow
of Flow
Temp. (T1)
°C
Time (t1)
Temp. (T2)
°C
Time (t2)
sec.
Temp. (T1)
Time (t1)
sec.
Temp. (T3)
°C
Time (t2)
sec.
Time
Time
sec.
°C
4
PVM4
150
60 to 120
250
5 max.
1
150
60 to 120
265 3
5 max.
2
Reflow Soldering Profile
1. Soldering profile for Lead-free solder (96.5Sn/3.0Ag/0.5Cu)
T5
T3
T4
T2
T1
t2
t3
Limit Profile
Standard Profile
Time (s)
t1
Standard Profile
Heating
Limit Profile
Heating
Peak
Temperature
(T3)
Peak
Temperature
(T5)
Pre-heating
Pre-heating
Cycle
Cycle
Series
of Reflow
of Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
°C
sec.
°C
sec.
°C
Time
°C
sec.
°C
sec.
°C
Time
PVM4
150 to 180 60 to 120
220
30 to 60
245 3
2
150 to 180 60 to 120
230
30 to 50
260 +5/-0
2
2. Soldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to 1)
Standard Profile
Heating
T3
T2
Peak
Temperature
(T3)
Pre-heating
Cycle
Series
of Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
t2
T1
Time
°C
sec.
°C
sec.
°C
Standard Profile
PVM4
150
60 to 120
183
30
230
1
t1
Time (s)
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
Soldering Time
Soldering Iron Power Output
Cycle of Soldering Iron
°C
sec.
W
Time
PVM4
350 10
3 max.
30 max.
1
Continued on the following page.
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVM4 Series Notice
Continued from the preceding page.
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
driver slot. We recommend the screwdriver below.
* Recommended screwdriver for manual adjustment
VESSEL MFG.: NO. 9000-2.6x30
3. Please use within the effective rotational angle.
The potentiometer does not have a mechanical stop
for over rotation. In cases out of effective
rotational angle, the trimmer potentiometer may
not function.
(Murata P/N: KMDR120)
We can supply the screwdrivers above.
If you place an order, please specify the Murata P/N.
2. Do not apply more than 4.9N (Ref. 500gf) of twist
and stress after mounting onto PCB to prevent
contact intermittence. If excessive force is
applied, the trimmer potentiometer may not
function.
4. When using a lock paint to fix the slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series") and evaluate
performance with your product. Lock paint may cause
corrosion or electrical contact problems.
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
4
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
25
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Trimmer Potentiometers
SMD Sealed Type Multi-turn PVG5 Series
0.9
Features
c
1. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
2. Available with reflow soldering method
3. Available for ultrasonic cleaning after soldering.
4. Clutch mechanism prevents excessive wiper rotation.
5. Both top and side adjustment directions.
6. Much smaller volume (1/5-1/2) than leaded multi-turn
potentiometer.
ADJ. Slot
Dia. ø1.5
Width 0.6
Depth 0.5
Marking
2.4
1.2
5.1
0.2
#2
#3
#1
2.5
Circuit
#2 (Wiper)
PVG5A
7. Complies with RoHS directive by new Cd free
cermet resistive material. Pb free terminals with
Sn plating.
2-0.7
#1
#3
Clockwise
Tolerance: 0.3
(
)
in mm
Applications
1. Measuring instruments 4. Power supply
2. OA equipment
c
ADJ. Slot
Dia. ø1.5
Width 0.6
Depth 0.5
2.4
Marking
5. Sensors
4.9
1.2
3. Medical equipment
6. Base station for cellular phones
5
3-0.7
#3
#2
Circuit
#2 (Wiper)
PVG5H
#1
#1
#3
Clockwise
Tolerance: 0.3
(
)
in mm
Top Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PVG5A100C03
PVG5A200C03
PVG5A500C03
PVG5A101C03
PVG5A201C03
PVG5A501C03
PVG5A102C03
PVG5A202C03
PVG5A502C03
PVG5A103C03
PVG5A203C03
PVG5A503C03
PVG5A104C03
PVG5A204C03
PVG5A504C03
PVG5A105C03
PVG5A205C03
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
10ohm 10ꢀ
20ohm 10ꢀ
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Reflow/Soldering Iron
26
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Side Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PVG5H100C03
PVG5H200C03
PVG5H500C03
PVG5H101C03
PVG5H201C03
PVG5H501C03
PVG5H102C03
PVG5H202C03
PVG5H502C03
PVG5H103C03
PVG5H203C03
PVG5H503C03
PVG5H104C03
PVG5H204C03
PVG5H504C03
PVG5H105C03
PVG5H205C03
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
0.25(70°C)
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
11
10ohm 10ꢀ
20ohm 10ꢀ
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Reflow/Soldering Iron
Construction
c
Adjustment Screw
Case
Gear
5
#2 Terminal
Wiper
Resistive Element
Ceramic Substrate
#1, #3 Terminal
Standard Land Pattern
c
PVG5A
PVG5H
2.0
2.0
1.3
1.2
1.3
Tolerance: 0.1
Tolerance: 0.1
1.3
1.0
1.3
(
)
(
)
in mm
in mm
27
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Characteristics
c
ΔTR
ΔV.S.S.: 1ꢀ
: 2ꢀ
Temperature Cycle
ΔTR
IR
:
2ꢀ
Humidity
: 10M ohm min.
ΔTR
ΔV.S.S.: 1ꢀ
: 1ꢀ
Vibration (20G)
ΔTR 1ꢀ
ΔV.S.S.: 1ꢀ
:
Shock (100G)
ΔTR 3ꢀ or 3 ohm maꢁ., whichever is ꢂreater
ΔV.S.S.: 1ꢀ
:
Temperature Load Life
Low Temperature Exposure
ΔTR 1ꢀ
:
ΔV.S.S.: 1ꢀ
ΔTR 2ꢀ
ΔV.S.S.: 1ꢀ
:
High Temperature Exposure
Rotational Life
ΔTR 3ꢀ or 3 ohm maꢁ., whichever is ꢂreater (100 cꢃcles)
:
ΔTR
ΔV.S.S.: Voltaꢂe Settinꢂ Stabilitꢃ
IR : Insulation Resistance
: Total Resistance Chanꢂe
5
28
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVG5 Series Notice
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
5
Notice (Soldering and Mounting)
1. Soldering
c
2. Mounting
(1) Soldering conditions
(1) Use our standard land dimension. Excessive land
area causes displacement due to the effect of
the surface tension of the solder. Insufficient
land area leads to insufficient soldering strength
of the chip.
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive
temperature, the trimmer capacitor may deviate
from the specified characteristics.
(2) This product cannot be soldered using the flow
soldering method. If you use the flow soldering
method, the trimmer potentiometer may not
function.
(2) Do not apply excessive force, preferably 9.8N
max. (Ref. 1kgf) when the trimmer potentiometer
is mounted to the PCB.
(3) Do not warp and/or bend the PC board to protect
trimmer potentiometer from breakage.
(4) In chip placers, the recommended size of the
cylindrical pick-up nozzle should be outer
dimension 4.0mm dia. and inner dimension 2.0mm
dia.
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
(4) Insufficient amounts of solder can lead to
insufficient soldering strength on PCB.
Excessive amounts of solder may cause bridging
between the terminals.
3. Cleaning
Isopropyl alcohol and ethyl alcohol are applicable
solvents for cleaning. If you use any other types of
solvents, please consult with a Murata factory
representative prior to using.
Continued on the following page.
29
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PVG5 Series Notice
Continued from the preceding page.
Soldering Profile
c
Reflow Soldering Profile
1. Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu)
T5
T3
T4
T2
T1
t2
t3
Limit Profile
Standard Profile
Time (s)
t1
Standard Profile
Heating
Limit Profile
Heating
Peak
Temperature
(T3)
Peak
Temperature
Temp. (T1) Time (t1) Temp. (T4) Time (t3)
(T5)
Pre-heating
Pre-heating
Cycle of
Reflow
Cycle of
Series
Reflow
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
°C
sec.
°C
sec.
°C
Time
°C
sec.
°C
sec.
°C
Time
PVG5
150 to 180 60 to 120
220
30 to 60
245 3
2
150 to 180 60 to 120
230
30 to 50 260 +5/-0
2
2. Soldering profile for Eutectic solder (63Sn/37Pb)
(Limit profile: refer to 1)
Standard Profile
Heating
T3
Peak
Temperature
(T3)
Pre-heating
Cycle of
Reflow
T2
Series
Temp. (T1) Time (t1) Temp. (T2) Time (t2)
5
t2
T1
Standard Profile
°C
sec.
°C
sec.
°C
Time
PVG5
150
60 to 120
183
30
230
1
t1
Time (s)
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
Soldering Time
sec.
Soldering Iron Power Output
Cycle of Soldering Iron
°C
W
Time
PVG5
350 10
3 max.
30 max.
1
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
driver slot. We recommend the screwdrivers below.
* Recommended screwdrivers for manual adjustment
<PVG5 series>
2. When adjusting with a screwdriver, do not apply
excessive force, preferable 4.9N max. (Ref 500gf).
3. When using a lock paint to fix the slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series") and evaluate
performance with your product. Lock paint may
cause corrosion or electrical problems.
VESSEL MFG.: NO.9000-1.3x30
(Murata P/N: KMDR130)
We can supply the screwdrivers above.
If you place an order, please specify the Murata P/N.
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Trimmer Potentiometers
Lead Sealed Type Single-turn PV32 Series
0.6
1.0 Depth
Features
c
1. Round body shape enables smaller area mount than
same 6mm square potentiometer.
6.6 0.5 Dia.
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering.
4. Flammability: UL94V-0
0.9 Dia. max.
3–0.5 0.1 Dia.
#1#2 #3
90° 6°
5. PV32 series complies with RoHS directive.
#2
#1
CLOCKWISE
#3
PV32H
Applications
c
1. HDTVs
5. Printers
Tolerance : 0.3
in mm
(
)
2. Professional cameras
3. CATV
6. Sensors
7. Power supply
6.4 0.4
5.9 0.4
4. FAX
6.9
0.6
1.0 Depth
3–0.5 0.1 Dia.
#3 #2 #1
5.0
#2
#1
#3
PV32N
CLOCKWISE
(
2.5 2.5
Tolerance : 0.3
)
in mm
6
Top Adjustment
Power Rating
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
(W)
PV32H100A01
PV32H200A01
PV32H500A01
PV32H101A01
PV32H201A01
PV32H501A01
PV32H102A01
PV32H202A01
PV32H502A01
PV32H103A01
PV32H203A01
PV32H503A01
PV32H104A01
PV32H204A01
PV32H504A01
PV32H105A01
PV32H205A01
PV32H505A01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
10ohm 20ꢀ
20ohm 20ꢀ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50ohm 20ꢀ
100ohm 20ꢀ
200ohm 20ꢀ
500ohm 20ꢀ
1k ohm 20ꢀ
2k ohm 20ꢀ
5k ohm 20ꢀ
10k ohm 20ꢀ
20k ohm 20ꢀ
50k ohm 20ꢀ
100k ohm 20ꢀ
200k ohm 20ꢀ
500k ohm 20ꢀ
1M ohm 20ꢀ
2M ohm 20ꢀ
5M ohm 20ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
31
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Side Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Mechanical Rotation Angle
Total Resistance Value
PV32N100A01
PV32N200A01
PV32N500A01
PV32N101A01
PV32N201A01
PV32N501A01
PV32N102A01
PV32N202A01
PV32N502A01
PV32N103A01
PV32N203A01
PV32N503A01
PV32N104A01
PV32N204A01
PV32N504A01
PV32N105A01
PV32N205A01
PV32N505A01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
1(230° 5°)
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
270+/-5 deg.
10ohm 20ꢀ
20ohm 20ꢀ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50ohm 20ꢀ
100ohm 20ꢀ
200ohm 20ꢀ
500ohm 20ꢀ
1k ohm 20ꢀ
2k ohm 20ꢀ
5k ohm 20ꢀ
10k ohm 20ꢀ
20k ohm 20ꢀ
50k ohm 20ꢀ
100k ohm 20ꢀ
200k ohm 20ꢀ
500k ohm 20ꢀ
1M ohm 20ꢀ
2M ohm 20ꢀ
5M ohm 20ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
Construction
c
Rotor
Cover
Wiper
"O"-Ring
Resistive
Element
Ceramic
Substrate
6
Terminal
Standard Mounting Holes
c
PV32H
PV32N
2.5
2.5
3-0.9
(1)
(3)
(2)
3-0.9
(1)
(3)
(2)
Tolerance: ±0.1
in mm
Tolerance: ±0.1
in mm
32
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Characteristics
c
ΔTR
ΔV.S.S.: ±1ꢀ
: ±2ꢀ
Temperature Cycle
ΔTR
IR
: ±2ꢀ
: 100M ohm min.
Humidity
ΔTR
ΔV.S.S.: ±1ꢀ
: ±1ꢀ
Vibration (20G)
ΔTR : ±1ꢀ
Shock (100G)
ΔV.S.S.: ±1ꢀ
ΔTR : ±2ꢀ
Temperature Load Life
Low Temperature Exposure
ΔV.S.S.: ±2ꢀ
ΔTR : ±2ꢀ
ΔV.S.S.: ±1ꢀ
ΔTR : ±2ꢀ
High Temperature Exposure
Rotational Life
ΔV.S.S.: ±1ꢀ
ΔTR : ±±ꢀ (200 cꢁcles)
ΔTR
ΔV.S.S.: Voltage Setting Stabilitꢁ
IR : Insulation Resistance
: Total Resistance Change
6
33
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PV32 Series Notice
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
Notice (Soldering and Mounting)
c
1. Soldering
2. Mounting
(1) Soldering conditions
(1) Use the PCB hole to meet the pin of the trimmer
potentiometer. If the trimmer potentiometer
is installed into an insufficient PCB hole, the
trimmer potentimeter may be damaged by
mechanical stress.
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
(2) To minimize mechanical stress when adjusting,
the trimmer potentiometer should be mounted onto
the PCB without a gap.
6
(2) Do not apply excessive force, preferably 9.8N
max. (Ref. 1kgf) when the trimmer potentiometer
is mounted to the PCB.
3. Cleaning
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
Isopropyl alcohol and ethyl alcohol are applicable
solvents for cleaning. If you use any other types
of solvents, please consult with a Murata factory
representative prior to using.
Continued on the following page.
34
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PV32 Series Notice
Continued from the preceding page.
Soldering Profile
c
Flow Soldering Profile
Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
t2
Limit Profile
Heating
T1
Standard Profile
Time (s)
t1
Pre-heating
Standard Profile
Limit Profile
Heating
Pre-heating
Heating
Pre-heating
Cycle
Cycle
Series
of Flow
of Flow
Temp. (T1)
°C
Time (t1)
Temp. (T2)
°C
Time (t2)
sec.
Temp. (T1)
Time (t1)
sec.
Temp. (T3)
°C
Time (t2)
sec.
sec.
Time
°C
Time
PV32
150
60 to 120
250
5 max.
1
150
60 to 120
260
3 max.
1
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
Soldering Time
sec.
Soldering Iron Power Output
Cycle of Soldering Iron
°C
W
Time
PV32
350 10
3 max.
30 max.
1
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
<PV32 series>
3. The rotational torque at the position of the
adjustment range should not exceed the stop
strength.
4. When using a lock paint to fix the slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series") and evaluate
performance with your product. Lock paint may
cause corrosion or electrical contact problems.
6
ENGINEER INC.: DA-40
(Murata P/N: KMDR180)
We can supply the screwdrivers above.
If you place an order, please specify the
Murata P/N.
2. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref. 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
35
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Trimmer Potentiometers
Lead Sealed Type Multi-turn PV12/PV37/PV36 Series
PV12 Series
Features
c
0.6 0.1
0.7 0.1 ꢀepth
7.0 1.0
6.6 0.1
1. The unique inner gear system recognizes the
position of the center of the shaft of the
potentiometer.
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering.
4. Clutch mechanism prevents excessive wiper rotation.
5. PV12 series complies with RoHS directive.
0.5
2.5 2.5
#2
#2
#1
CLOCKWISE
#3
#3
#1
PV12P
Tolerance : 0.3
(
)
Applications
c
in mm
1. HDTVs
5. Printers
2. Professional cameras
3. CATV
6. Sensors
7.7 0.3
0.6 0.1
0.7 0.1 ꢀepth
7. Switching power supplies
4. FAX
3–0.5 0.1 ꢀia.
#1
#2 #3
7.6 0.3
6.3 0.3
#2
#1
CLOCKWISE
#3
PV12T
Tolerance : 0.3
in mm
(
)
2.5
2.5
Top Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PV12P100A01
PV12P200A01
PV12P500A01
PV12P101A01
PV12P201A01
PV12P501A01
PV12P102A01
PV12P202A01
PV12P502A01
PV12P103A01
PV12P203A01
PV12P503A01
PV12P104A01
PV12P204A01
PV12P504A01
PV12P105A01
PV12P205A01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
10ohm 10ꢀ
20ohm 10ꢀ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
7
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
36
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Side Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PV12T100A01
PV12T200A01
PV12T500A01
PV12T101A01
PV12T201A01
PV12T501A01
PV12T102A01
PV12T202A01
PV12T502A01
PV12T103A01
PV12T203A01
PV12T503A01
PV12T104A01
PV12T204A01
PV12T504A01
PV12T105A01
PV12T205A01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
4
10ohm 10ꢀ
20ohm 10ꢀ
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
100
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
Construction
c
Shaft
Case
"O"-Ring
Gear
Rotor
Insert
Wiper
Ceramic Resistive
Element
Alumina Substrate
Terminal
Standard Mounting Holes
c
7
PV12P
PV12T
2.5
2.5
3-0.9
3-0.9
(2)
(3)
(3)
(1)
(1)
2.5
2.5
(2)
Tolerance: 0.1
in mm
Tolerance: 0.1
in mm
37
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Characteristics
c
ΔTR
ΔV.S.S.: 1ꢀ
: 2ꢀ
Temperature Cycle
ΔTR
IR
:
2ꢀ
Humidity
: 100M ohm min.
ΔTR
ΔV.S.S.: 1ꢀ
: 1ꢀ
Vibration (20G)
ΔTR 1ꢀ
ΔV.S.S.: 1ꢀ
:
Shock (100G)
ΔTR 3ꢀ
ΔV.S.S.: 2ꢀ
:
Temperature Load Life
Low Temperature Exposure
ΔTR 3ꢀ
:
ΔV.S.S.: 1.5ꢀ
ΔTR 3ꢀ
ΔV.S.S.: 1.5ꢀ
:
High Temperature Exposure
Rotational Life
ΔTR
:
3ꢀ (200 cꢁcles)
ΔTR
: Total Resistance Change
ΔV.S.S.: Voltage Setting Stabilitꢁ
IR : Insulation Resistance
7
38
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PV37 Series
1.1
6.4
1.8 0.2ꢀ Di.
0.6 0.2
Features
c
1.2
1. Smaller volume (about one-third) than 25-turn
MirkDng
potentiometer
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering.
4. Clutch mechanism prevents excessive wiper rotation.
5. Both top and side adjustment directions.
6. Complies with RoHS directive by new Cd free cermet
resistive material. Pb free terminals with
Sn plating.
3–0.4 0.1ꢀ Di.
#3
#2
#1
#2
2.5 2.5
#1
#3
CLOCKWISE
PV37W
Tolerinceꢀ:ꢀ 0.3ꢀꢀ
(ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
)
Dnꢀmm
Applications
1. Measuring instruments 4. Power supply
c
6.4
0.6
1.0
MirkDng
1.1
2. OA equipment
5. Base station for cellular phones
3. Medical equipment
3–0.4 0.1ꢀ Di.
#3
#2
#1
2.5 2.5
#2
PV37X
#1
CLOCKWISE
#3
Tolerinceꢀ:ꢀ 0.3ꢀꢀ
(ꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀꢀ
)
Dnꢀmm
Top Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PV37W100C01
PV37W200C01
PV37W500C01
PV37W101C01
PV37W201C01
PV37W501C01
PV37W102C01
PV37W202C01
PV37W502C01
PV37W103C01
PV37W203C01
PV37W503C01
PV37W104C01
PV37W204C01
PV37W504C01
PV37W105C01
PV37W205C01
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10ohm 10ꢀ
20ohm 10ꢀ
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
7
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
39
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Side Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PV37X100C01
PV37X200C01
PV37X500C01
PV37X101C01
PV37X201C01
PV37X501C01
PV37X102C01
PV37X202C01
PV37X502C01
PV37X103C01
PV37X203C01
PV37X503C01
PV37X104C01
PV37X204C01
PV37X504C01
PV37X105C01
PV37X205C01
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
0.25(85°C)
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
12
10ohm 10ꢀ
20ohm 10ꢀ
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
150
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
Construction
Standard Mounting Holes
c
c
PV37W/PV37X
Gear
Case
2.5
2.5
3-0.9
(1)
(3)
Adjustment Screw
Terminal
(2)
Wiper
Cermet Resistive
Element
Tolerance: 0.1
in mm
Alumina Substrate
7
Characteristics
c
ΔTR
ΔV.S.S.: 1ꢀ
: 1ꢀ
Temperature Cycle
ΔTR
IR
:
2ꢀ
Humidity
: 100M ohm min.
ΔTR
ΔV.S.S.: 1ꢀ
: 1ꢀ
Vibration (20G)
ΔTR 1ꢀ
ΔV.S.S.: 1ꢀ
:
Shock (100G)
ΔTR 2ꢀ
ΔV.S.S.: 1ꢀ
:
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life
ΔTR 1ꢀ
:
ΔV.S.S.: 1ꢀ
ΔTR 2ꢀ
:
ΔV.S.S.: 1ꢀ
...
...
ΔTR : RV100 ohm
3ꢀ
RG100 ohm
ΔTR
2ꢀ (200 cꢁcles)
: Total Resistance Change
ΔV.S.S.: Voltage Setting Stabilitꢁ
IR
R
: Insulation Resistance
: Standard Total Resistance
40
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PV36 Series
1.2
Features
c
9.6
1.3
2.0 ꢂia.
0.6
1. High resolution 25-turns potentiometer enables
Marking
precision adjustment easily.
2. Sealed construction protects the interior from dust
and liquid, which achieves stable performance.
3. Available for ultrasonic cleaning after soldering.
4. Clutch mechanism prevents excessive wiper rotation.
5. Both top and side adjustment directions.
6. Complies with RoHS directive by new Cd free cermet
resistive material. Pb free terminals with
Sn plating.
3-0.5 0.1 ꢂia.
#3 #2 #1
2.5 2.5
#2 (Wiper)
#3
#1
PV36W
Clockwise
Tolerance : 0.3
in mm
(
)
Applications
1. Measuring instruments 4. Power supply
2. OA equipment
c
9.6
0.7
1.3
Marking
1.2
5. Base station for cellular phones
3. Medical equipment
3-0.5 0.1 ꢂia.
#3 #2 #1
2.5 2.5
#2 (Wiper)
#3
#1
PV36X
Clockwise
Tolerance : 0.3
in mm
(
)
Top Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PV36W100C01
PV36W200C01
PV36W500C01
PV36W101C01
PV36W201C01
PV36W501C01
PV36W102C01
PV36W202C01
PV36W502C01
PV36W103C01
PV36W203C01
PV36W503C01
PV36W104C01
PV36W204C01
PV36W504C01
PV36W105C01
PV36W205C01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10ohm 10ꢀ
20ohm 10ꢀ
150
150
150
150
100
100
100
100
100
100
100
100
100
100
100
100
100
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
7
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
41
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Side Adjustment
Power Rating
(W)
Number of Turns
(Effective Rotation Angle)
TCR
(ppm/°C)
Part Number
Total Resistance Value
PV36X100C01
PV36X200C01
PV36X500C01
PV36X101C01
PV36X201C01
PV36X501C01
PV36X102C01
PV36X202C01
PV36X502C01
PV36X103C01
PV36X203C01
PV36X503C01
PV36X104C01
PV36X204C01
PV36X504C01
PV36X105C01
PV36X205C01
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
0.5(70°C)
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
25
10ohm 10ꢀ
20ohm 10ꢀ
150
150
150
150
100
100
100
100
100
100
100
100
100
100
100
100
100
50ohm 10ꢀ
100ohm 10ꢀ
200ohm 10ꢀ
500ohm 10ꢀ
1k ohm 10ꢀ
2k ohm 10ꢀ
5k ohm 10ꢀ
10k ohm 10ꢀ
20k ohm 10ꢀ
50k ohm 10ꢀ
100k ohm 10ꢀ
200k ohm 10ꢀ
500k ohm 10ꢀ
1M ohm 10ꢀ
2M ohm 10ꢀ
Operating Temperature Range: -55 to 125 °C
Soldering Method: Flow/Soldering Iron
Construction
Standard Mounting Holes
c
c
PV36W/X
Adjustment Screw
Terminal
3-0.9
(3)
(2)
(1)
2.5
2.5
Case
Wiper
Alumina Substrate
Cermet Resistive Element
Gear
Tolerance: 0.1
in mm
7
Characteristics
c
ΔTR
ΔV.S.S.: 1ꢀ
: 2ꢀ
Temperature Cycle
ΔTR
IR
:
2ꢀ
Humidity
: 100M ohm min.
ΔTR
ΔV.S.S.: 1ꢀ
: 1ꢀ
Vibration (20G)
ΔTR 1ꢀ
ΔV.S.S.: 1ꢀ
:
Shock (100G)
ΔTR 3ꢀ
ΔV.S.S.: 1ꢀ
:
Temperature Load Life
Low Temperature Exposure
High Temperature Exposure
Rotational Life
ΔTR 2ꢀ
:
ΔV.S.S.: 1ꢀ
ΔTR 3ꢀ
:
ΔV.S.S.: 1ꢀ
...
ΔTR : RV1k ohm, RU500k ohm
5ꢀ
3ꢀ (200 cꢁcles)
...
1k ohmFRF500k ohm
ΔTR
: Total Resistance Change
ΔV.S.S.: Voltage Setting Stabilitꢁ
IR
R
: Insulation Resistance
: Standard Total Resistance
42
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PV12/PV37/PV36 Series Notice
Notice (Operating and Storage Conditions)
c
1. Store in temperatures of -10 to +40°C and
The trimmer potentiometer should not be used under
the following environmental conditions:
(1) Corrosive gaseous atmosphere
(Ex. Chlorine gas, Hydrogen sulfide gas, Ammonia
gas, Sulfuric acid gas, Nitric oxide gas, etc.)
(2) In liquid
relative humidity of 30-85%.
2. Do not store in or near corrosive gases.
3. Use within six months after delivery.
4. Open the package just before using.
5. Do not store under direct sunlight.
6. If you use the trimmer potentiometer in an
environment other than listed at right, please
consult with a Murata factory representative prior
to using.
(Ex. Oil, Medical liquid, Organic solvent, etc.)
(3) Dusty/dirty atmosphere
(4) Direct sunlight
(5) Static voltage or electric/magnetic fields
(6) Direct sea breeze
(7) Other variations of the above
Notice (Rating)
c
1. When using with partial load (rheostat), minimize
the power depending on the resistance value.
2. The maximum input voltage to a trimmer
potentiometer should not exceed (P·R)^1/2 or the
maximum operating voltage, whichever is smaller.
Notice (Soldering and Mounting)
c
1. Soldering
2. Mounting
(1) Soldering conditions
(1) Use the PCB hole to meet the pin of the trimmer
potentiometer. If the trimmer potentiometer
is installed into an insufficient PCB hole, the
trimmer potentimeter may be damaged by
mechanical stress.
Refer to the temperature profile.
If the soldering conditions are not suitable,
e.g., excessive time and/or excessive
temperature, the trimmer potentiometer may
deviate from the specified characteristics.
(2) To minimize mechanical stress when adjusting,
the trimmer potentiometer should be mounted onto
the PCB without a gap.
(2) Do not apply excessive force, preferably 9.8N
max. (Ref. 1kgf) when the trimmer potentiometer
is mounted to the PCB.
3. Cleaning
(3) The soldering iron should not come in contact
with the case of the trimmer potentiometer. If
such contact does occur, the trimmer
potentiometer may be damaged.
Isopropyl alcohol and ethyl alcohol are applicable
solvents for cleaning. If you use any other types
of solvents, please consult with a Murata factory
representative prior to using.
7
Continued on the following page.
43
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
PV12/PV37/PV36 Series Notice
Continued from the preceding page.
Soldering Profile
c
Flow Soldering Profile
Soldering profile for lead free solder (96.5Sn/3.0Ag/0.5Cu), Eutectic solder (63Sn/37Pb)
T3
T2
t2
Limit Profile
Heating
T1
Standard Profile
Time (s)
t1
Pre-heating
Standard Profile
Limit Profile
Heating
Pre-heating
Heating
Pre-heating
Cycle
Cycle
Series
of Flow
of Flow
Temp. (T1)
°C
Time (t1)
Temp. (T2)
°C
Time (t2)
sec.
Temp. (T1)
Time (t1)
sec.
Temp. (T3)
°C
Time (t2)
sec.
sec.
Time
°C
Time
PV12
PV37
PV36
150
60 to 120
250
5 max.
1
150
60 to 120
260
3 max.
1
Soldering Iron
Standard Condition
Series
Temperature of Soldering Iron Tip
°C
Soldering Time
sec.
Soldering Iron Power Output
W
Cycle of Soldering Iron
Time
PV12
PV37
PV36
350 10
3 max.
30 max.
1
Notice (Handling)
c
1. Use suitable screwdrivers that fit comfortably in the
driver slot. We recommend the screwdrivers below.
* Recommended screwdriver for manual adjustment
ENGINEER INC.: DA-40
3. When using a lock paint to fix the slot position,
please use adhesive resin without chlorine or
sulfur (Three-bond "1401 series") and evaluate
performance with your product. Lock paint may
cause corrosion or electrical contact problems.
(Murata P/N: KMDR180)
We can supply the screwdrivers above.
If you place an order, please specify the Murata P/N.
2. When adjusting with an adjustment tool, the applied
force to the adjustment screw should not exceed
4.9N (Ref. 500gf). If excessive force is applied,
the trimmer potentiometer may not function due to
damage.
7
Notice (Other)
c
1. Please make sure that your product has been
evaluated and confirmed against your
specifications when our product is mounted to your
product.
2. Murata cannot guarantee trimmer potentiometer
integrity when used under conditions other than
those specified in this document.
44
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
SMD Open Type (PVZ2/A2/Z3)/SMD Sealed Type (PVM4A_C01 Series) Specifications and Test Methods
The tests and measurements should be conducted under the conditions of 1± to 3±ꢀC of temperature, 2± to 7±% of relative humidity and 86 to 106 kpa of
atmospheric pressure unless otherwise specified. If questionable results occur that have been measured in accordance with the aboveꢁmentioned
conditions, the tests and measurements should be conducted under the conditions of 2±±2ꢀC of temperature, 4± to ±±% of relative humidity and 86 to
106 kpa of atmospheric pressure.
No.
1
Item
Test Methods
Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance
between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme
clockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end
terminal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not
exceeded.
Residual Resistance
Contact resistance variation should be measured with the measuring circuit shown below, or its equivalent. The
operating wiper should be rotated in both directions through 90% of the actual effectiveꢁelectrical travel for a total of
6 cycles.
The rate of rotation of the operating wiper should be such that the wiper completes 1 count in determining whether or
not a contact resistance variation is observed at least twice in the same location. The test current should follow the
value given in Table 2 unless otherwise limited by the power rating.
Oscilloscope
Rx
#3
#1
· PVZ/PVA2
Standard Total
#2
Constant Current
Source
(Test current
shown in Table 2)
Test Current
Resistance R (ohm)
100VRF10k
10kVRF100k
100kVR
Calibration
resistance
AC
Amplifier
vertical
entry
20mA max.
1mA max.
100μA max.
2
Contact Resistance
Rx : Trimmer Potentiometer
Oscilloscope bandwidth: 100Hz to ±0kHz
· PVM4ApppC01
Figure 1: CRV measuring circuit
Standard Total
Test
Standard Total
Resistance R
(ohm)
Test
Current
Resistance R
Current
(ohm)
RV100
100FRF±00
±00VRF1k
1kVRF2k
20mA
10mA
4mA
±0kVRF200k 200μA
200kVRF1M
1MVRF2M
2MVR
100μA
±0μA
30μA
2mA
2kVRF±0k
1mA
Table 2: Test current for CRV
The wiper contact point should be preset at about ±0% position of effective rotational angle. After that, the
potentiometer should be placed in a chamber at 40±2ꢀC and 90 ꢁ 9±% without loading for ±00±12 hours.
The resistance value should be measured after keeping the potentiometer in a room for ±±1/6 hours.
3
4
Humidity Exposure
The wiper contact point should be preset at about ±0% position of effective rotational angle. After that, the
potentiometer should be placed in a chamber at 70±2ꢀC without loading for ±00±12 hours. The resistance value
should be measured after keeping the potentiometer in a room for 1.±±1/6 hours.
High Temperature
Exposure
The wiper contact point should be preset at about ±0% position of effective rotational angle. After that, the
potentiometer should be placed in a chamber at 40±2ꢀC and 90 ꢁ 9±% with loading the 1/2 rated voltage between
#1 and #2 terminals, intermittently 1.± hours ON and 0.± hours OFF for 1000±12 hours.
5
6
Humidity Load Life
Load Life
The resistance value should be measured after keeping the potentiometer in a room for ±±1/6 hours.
The wiper contact point should be preset at about ±0% position of effective rotational angle. After that, the
potentiometer should be placed in a chamber at 70±2ꢀC (±0±2ꢀC for PVZ) with loading the 1/2 rated voltage
between #1 and #2 terminals, intermittently 1.± hours ON and 0.± hours OFF for 1000±12 hours. The resistance
value should be measured after keeping the potentiometer in a room for 1 to 2 hours.
The wiper contact point should be preset at about ±0% position of effective rotational angle. After that, the
potentiometer should be subjected to Table 3, Table 4 temperature for ± cycles. The resistance value should be
measured after keeping the potentiometer in a room for 1 to 2 hours.
7
Temperature Cycle
Sequence
1
2
3
4
Sequence
1
2
3
4
Temp. (ꢀC) ꢁ2±±3 +2±±2 +8±±3 +2±±2
Time (min.) 30±3 10 max. 30±3 10 max.
Temp. (ꢀC) ꢁ±±±3 +2±±2 +12±±3 +2±±2
Time (min.) 30±3 10 max. 30±3 10 max.
Table 3: PVZ
Table 4: PVA2/PVM4A---C01
The trimmer potentiometer should be subjected to each of the following temperatures (see Table ±, Table 6) for 30
to 40 minutes. The resistance value should be measured in the chamber.
R2 – R1
R1 (T2 – T1)
TCR=
Z 106 (ppm/ꢀC)
Temperature Coefficient of
Resistance
T1 : Reference temperature in degrees celsius
R1 : Resistance at reference temperature in ohm
T2 : Test temperature in degrees celsius
R2 : Resistance at test temperature in ohm
8
9
Sequence
1*
2
3*
4
Sequence
1*
2
3*
4
Temp. (ꢀC) +2±±2 ꢁ2±±3 +2±±2 +8±±3
Temp. (ꢀC) +2±±2 ꢁ±±±3 +2±±2 +12±±3
Table ±: PVZ
Note*: Norm temp.
Table 6: PVA2/PVM4A---C01
The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per
minute, for 10 cycles continuously. The resistance value should be measured after keeping the potentiometer in a
room for 10±± minutes.
Rotational Life
45
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
SMD Sealed Type (PVG3/M4A_D01/G5)/Lead Sealed Type (PV32/12/37/36) Specifications and Test Methods
The following describes trimmer potentiometer testing conducted by Murata Manufacturing Co., Ltd. in accordance with MIL-R-22097 (military specification
for variable resistors, non-wirewound) and MIL-STD-202 (test methods for electronic and electrical component parts).
No.
Item
Test Methods
Measure total resistance between the resistance element and terminals (#1 and #3) with the contact arm positioned
against a stop. The positioning of the contact arm and terminal should be the same for subsequent total resistance
measurements on the same device. Use the test voltage specified in Table 1 for total resistance measurements.
This voltage should be used for all subsequent total resistance measurements.
Total Resistance,
Nominal (ohm)
10VRV100
Maximum Test
Voltage (V)
1.0
1
Total Resistance
100FRV1k
3.0
1kFRV10k
10.0
10kFRV100k
100kFR
30.0
100.0
Table 1: Total resistance test voltage
Position the contact arm at the extreme counterclockwise limit of mechanical travel and measure the resistance
between the contact arm and the corresponding end terminal. Then, position the contact arm at the extreme
2
Residual Resistance
clockwise limit of mechanical travel and measure the resistance between the contact arm and the corresponding end
terminal. During this test, take suitable precautions to ensure that the rated current of the resistance element is not
exceeded.
Contact resistance variation should be measured with the measuring circuit shown in Figure 1, or its equivalent. The
adjustment rotor (screw) should be rotated in both directions through 90% of the actual effective-electrical rotational
angle (number of turns) for a total of 6 cycles. Only the last 3 cycles should count in determining whether or not a
contact resistance variation is observed at least twice in the same location, exclusive of the roll-on or roll-off points
where the contact arm moves from the termination, on or off, the resistance element. The rate of rotation of the
adjustment rotor (screw) should be such that the adjustment rotor (screw) completes 1 cycle for 5 seconds minimum
to 2 minutes maximum. The test current used should follow the value given in Table 2 unless otherwise limited by
power rating.
Standard Total Resistance
R (ohm)
Oscilloscope
Rx
#3
#1
Test Current
Contact Resistance
Variation
3
#2
RV100
20mA
10mA
4mA
2mA
1mA
200μA
100μA
50μA
30μA
Constant Current Source
(Test current shown in Table 2)
Calibration
resistance
100FRF500
500VRF1k
1kVRF2k
2kVRF50k
50kVRF200k
200kVRF1M
1MVRF2M
2MVR
AC
Amplifier
vertical
entry
Rx : Trimmer Potentiometer
Oscilloscope bandwidth :100Hz to 50kHz
Figure 1: CRV measuring circuit
Table 2: Test current for CRV
The trimmer potentiometer should be subjected to each of the following temperatures (see Table 3) for 30-45
minutes. Temperature coefficient of resistance should be applied to the following formula.
R2 – R1
R1 (T2 – T1)
TCR=
Z 106 (ppm/°C)
T1 : Reference temperature in degrees celsius
T2 : Test temperature in degrees celsius
R1 : Resistance at reference temperature in ohm
R2 : Resistance at test temperature in ohm
Temperature Coefficient of
Resistance
4
Sequence
Temperature (°C)
1*
2
3
4*
5
6
Min. operating
Temperature
Max. operating
Temperature
+25
-15
+25
+65
Note*: Reference temperature
Table 3: Test temperatures
The wiper should be set at approximately 40% of the actual effective-electrical rotational angle (number of turns). An
adequate DC test potential should be applied between terminal #1 and terminal #3. The voltage between terminal #1
and terminal #3, and the voltage between terminal #1 and terminal #2, should be measured and applied to the
following formula.
E
e'
E
e
E
Voltage Setting
Stability
Voltage setting stability= — – — Z100 (%)
(
)
5
#1
#3
e : Before test
(The voltage between terminal #1 and terminal #2)
e' : After test
(The voltage between terminal #1 and terminal #2)
#2
e
Figure 2
Continued on the following page.
46
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
SMD Sealed Type (PVG3/M4A_D01/G5)/Lead Sealed Type (PV32/12/37/36) Specifications and Test Methods
Continued from the preceding page.
No.
6
Item
Test Methods
The trimmer potentiometer should be subjected to Table 4 temperature for 5 cycles. The trimmer potentiometer
should be remoꢁed from the chamber, and maintained at a temperature of 25±53C for 1-2 hours.
Sequence
Temp. ꢀ3C) PV-- series -55±± +25±2 +125±± +25±2
Time ꢀmin.) ±0 5 max. ±0 5 max.
1
2
3
4
Temperature Cycle
Table 4: One cycle of temperature cycle.
1) PV12, PV±2, PVM4A---D01 series
The trimmer potentiometer should be placed in a chamber at a temperature of 40±23C and a humidity of ꢃ0-ꢃ5ꢄ
without loading for 250±8 hours ꢀ500±12 hours for PVM4A---D01 series). The trimmer potentiometer should be
remoꢁed from the chamber, and maintained at a temperature of 25±53C for 5±1ꢅꢆ hours.
2) PVG±, PVG5, PV±ꢆ, PV±ꢂ series
The trimmer potentiometer should be subjected to the programmed humidity enꢁironment for 10 cycle ꢀsee Figure ±).
The trimmer potentiometer should be remoꢁed from the chamber, and maintained at a temperature of 25±53C for
1.5±1ꢅ2 hours.
MIL-STD-202 METHOD 10ꢆ
80-ꢃ8ꢄRH
80-ꢃ8ꢄRH
ꢂ0
ꢆ5
ꢆ0
55
50
45
40
±5
±0
25
20
ꢃ0-ꢃ8ꢄRH
ꢃ0-ꢃ8ꢄRH
ꢃ0-ꢃ8ꢄRH
INITIAL CONDITIONING
IN A DRY OVEN
24 HOURS
RATE OF CHANGE OF TEMPERATURE IS UNSPECIFIED.
HOWEVER, SPECIMENS SHOULD NOT BE SUBJECTED
TO RADIANT HEAT FROM CHAMBER-CONDITIONING
PROCESSES
HUMIDITY
UNCONTROLLED
END OF FINAL CYCLE
MEASUREMENTS AS
SPECIFIED IN ±.ꢆ
7
Humidity
+103C
-23C
CIRCULATION OF CONDITIONING AIR SHOULD
BE AT A MINIMUM CUBIC RATE PER MINUTE
EQUIVALENT TO 5 TIMES THE VOLUME OF
THE CHAMBER
INITIAL MEASUREMENTS
15 AS SPECIFIED IN ±.2
10
5
VOLTAGE APPLIED AS SPECIFIED IN ±.5
0
UNLESS OTHERWISE SPECIFIED
TEMPERATURE TOLERANCE IS,
-5
STEPS ꢂa AND ꢂb PERFORMED DURING ANY
5 OF THE FIRST ꢃ CYCLES. HUMIDITY
UNCONTROLLED DURING STEPS ꢂa AND ꢂb
ONLY
-10 ±23C AT ALL POINTS WITHIN THE
STEP ꢂb
STEP ꢂa
CHAMBER EXCEPT THE IMMEDIATE
VICINITY OF THE SPECIMENS AND
THE CHAMBER SURFACES
PRIOR TO FIRST CYCLE
UNLESS OTHERWISE
SPECIFIED
STEP 1 STEP 2 STEP ± STEP 4 STEP 5 STEP ꢆ
STEP ꢂ
ONE CYCLE 24 HOURS. REPEAT AS SPECIFIED IN ±.±
0
1
2
±
4
5
ꢆ
ꢂ
8
ꢃ 10 11 12 1± 14 15 1ꢆ 1ꢂ 18 1ꢃ 20 21 22 2± 24
Figure ±
1) PV-- series
The trimmer potentiometer should be ꢁibrated throughout the frequency range at the 20G leꢁel. A complete
frequency range, 10Hz to 2000Hz and back, should be made within 15 minutes for a total of 4 sweeps in each of the
three axis directions for a total of 12 sweeps.
8
9
Vibration
Shock
1) PV-- series
The trimmer potentiometer should be shocked at the 100G leꢁel and should be subjected to 4 shocks in each of the
three axis directions for a total of 12 shocks.
2) PVM4A---D01 series
The trimmer potentiometer should be shocked at the 100G leꢁel and should be subjected to ± shocks in each of the
six axis directions for a total of 18 shocks.
Full rated continuous working ꢁoltage not exceeding the maximum rated ꢁoltage should be applied intermittently
between terminal #1 and terminal #± of the trimmer potentiometer, 1.5 hours on and 0.5 hours off, for a total of
1000±12 hours, at a temperature of ꢂ0±23C ꢀ85±23C for PV±ꢂ series). The trimmer potentiometer should be
remoꢁed from the chamber, and maintained at a temperature of 25±53C for 1 to 2 hours.
10 Temperature Load Life
The trimmer potentiometer should be placed in a chamber at a temperature of 125±±3C 250±8 hours without
loading. The trimmer potentiometer should be remoꢁed from the chamber, and maintained at a temperature of
25±53C for 1 to 2 hours.
11 High Temperature Exposure
The trimmer potentiometer should be placed in a chamber at a temperature of -55±±3C for 1 hours without loading.
Full rated continuous working ꢁoltage not exceeding the maximum rated ꢁoltage should be applied for 45 minutes.
The trimmer potentiometer should be remoꢁed from the chamber, and maintained at a temperature of 25±53C for
approximately 24 hours.
Low Temperature Exposure
12
(Except for PVM4A---D01)
The trimmer potentiometer should be placed in a chamber at a temperature of -25±±3C ꢀ-55±±3C for
PVM4A---D01 series) 48±4 hours without loading. The trimmer potentiometer should be remoꢁed from the
chamber, and maintained at a temperature of 25±53C for 1-2 hours.
Low Temperature Operation
13
(Only for PVM4A---D01)
Continued on the following page.
47
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
SMD Sealed Type (PVG3/M4A_D01/G5)/Lead Sealed Type (PV32/12/37/36) Specifications and Test Methods
Continued from the preceding page.
No.
Item
Test Methods
1)PV-- series
Full rated continuous working voltage not exceeding the maximum rated voltage should be applied with the circuit
shown in the figure. The adjustment rotor (screw) should be continuously cycled through not less than 90% of
effective-electrical rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes
maximum for total of 200 cycles.
Resistor 1
Resistor 2
End Terminal
End Terminal
End Terminal
End Terminal
14 Rotational Life
DC supply
Figure 4
2) PVG3, PVG5 series
The adjustment rotor (screw) should be continuously cycled though not less than 90% of effective-electrical
rotational angle (number of turns), at the rate of 1 cycle for 5 seconds minimum to 2.5 minutes maximum for a total
of 50 (100 for PVG5) cycles, without loading.
3) PVM4A---D01 series
The wiper should be rotated over 90% of the effective rotational angle without loading at a speed of 10 cycles per
minute, for 100 cycles continuously.
48
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Packaging
Minimum Quantity
c
Minimum Quantity (pcs.)
Part Number
ø180mm reel
3000
3000
3000
2000
2500
1500
1000
500
Bulk
1000
1000
1000
1000
1000
1000
500
PVZ2A
PVZ2R
PVA2
PVZ3A/H
PVZ3G
PVZ3K
PVG3A/G
PVM4
500
250
100
PVG5A
PVG5H
PV32
500
100
—
100
—
50
PV12
—
100
PV36
—
100
PV37
Dimensions of Reel
c
PVZ2A/PVA2/PVZ3A/PVZ3G/PVZ3H
PVZ2R/PVZ3K/PVM4/PVG3/PVG5H
13.0o0.5 Dia.
21.0o0.8 Dia.
13.0o0.5 Dia.
2.0o0.5
2.0o0.5
21.0o0.8 Dia.
9.0o1.0
13.0o1.0
17.0o1.0
13.0o1.0
178o2 Dia.
178o2 Dia.
(in mm)
(in mm)
PVG5A
13.0 0.5 Dia.
2.0 0.5
21.0 0.8 Dia.
17.0 1.0
19.4 1.0
178.0 2.0 Dia.
(in mm)
Continued on the following page.
49
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Packaging
Continued from the preceding page.
Dimensions of Plastic Tape
c
PVZ2 / PVA2 / PVZ3
2.±±±.1
+±.1
1.5
–±
Dia.
I
4.±±
±.1
4.±±±.1
a
J
1.75±±.1
D
C
B
A
Across a – a'
a'
Tape feeding direction
Part Number
PVZ2A
A
B
C
D
I
J
3.1±±.1
5.1±±.2
3.1±±.1
8.±±±.2
12.±±±.2
3.5±±.1
5.5±±.1
1.1±±.1
1.±±±.1
1.1±±.1
1.95±±.1
1.3±±.1
2.3±±.1
±.2±±.1
±.3±±.1
2.4±±.2
PVZ2R
PVA2
8.±±±.2
3.5±±.1
5.5±±.1
±.2±±.1
±.3±±.1
PVZ3A/H
PVZ3G
PVZ3K
3.8±±.2
5.8±±.2
3.3±±.2
12.±±±.2
s 4HE SIDE CONTAINING TERMINALS ꢀꢁ AND ꢀꢂ FACES THE PLASTIC TAPE PILOT HOLESꢃ
(in mm)
Dimensions of Plastic Tape
c
PVG3A / PVG3G / PVM4 / PVG5H
2.±±±.1
+±.1
I
8.±±±.1
4.±±±.1
1.5
$IAꢃ
nꢆ
A
J
B
!CROSS A n Ag
Ag
A
4APE FEEDING DIRECTION
Part Number
PVG3A
A
B
I
J
4.±±±.1
4.9±±.1
5.5±±.2
5.8±±.2
4.±±±.1
2.1±±.1
±.3±±.1
PVG3G
PVM4
4.5±±.2
5.4±±.2
2.15±±.1
4.±±±.1
±.3±±.1
±.4±±.1
PVG5H
s 4HE SIDE CONTAINING TERMINALS ꢀꢁ AND ꢀꢂ FACES THE PLASTIC TAPE PILOT HOLES
ꢄEXCEPT 06'ꢂꢅꢃ
(in mm)
Continued on the following page.
50
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Packaging
Continued from the preceding page.
Dimensions of Plastic Tape
c
PVG5A
ꢀ.±±±.ꢁ
4.±±±.ꢁ ꢁ.5
+±.ꢁ
–±
I
ꢁꢀ.±±±.ꢀ
Dia.
a
J
B
Across a – a'
a'
A
Tape feeding direction
Part Number
A
B
I
J
4.3±±.ꢀ
5.4±±.ꢀ
5.4±±.ꢁ
±.4±±.ꢁ
PVG5A
(in mm)
51
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
!Note
R50E.pdf
Jul.23,2012
Recommended Adjustment Tools/Qualified Standards
Recommended Adjustment Tools
c
Trimmer Potentiometer Series
Manufacturers
Model Number
KMDR190
MURATA Model Number
KMDR190
Blade
+ Cross
MURATA MFG.
PVZ2/PVA2
PVZ3G
VESSEL MFG.
No.9000+1.7Z30
SA-2225
KMDR080
+ Cross
TORAY INDUSTRIES, INC.
VESSEL MFG.
KMDR070
– Minus (round edge)
– Minus
PVZ3A/PVZ3H/PVG3
PVM4
No.9000–2.6Z30
No.9000–1.3Z30
No.9000–1.8Z30
KMDR120
VESSEL MFG.
KMDR130
– Minus
PVG5
VESSEL MFG.
KMDR110
– Minus
others
For Automatic Adjustment
Trimmer Potentiometer Series
Manufacturers
Model Number
MURATA Model Number
Blade
PVZ3
PVG3
TORAY INDUSTRIES, INC
JB-2225
KMBT070
– Minus (round edge)
Qualified Standards
c
The products listed here have been produced by the ISO9001 and ISO/TS16949 certified factory.
MURATA FACTORY
Qualified Date
Standard
Qualified Number
Wuxi Murata Electronics Co.,Ltd.
May 12, 1999
UNDERWRITERS LABORATORIES INC.
A7924
* No ODCs (Ozone Depleting Chemicals) are used on all Murata's trimmer potentiometers.
52
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
R50E.pdf
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Jul.23,2012
相关型号：
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明