RCE5C2E103J1M1H03A_技术文档

Reference Specification

Leaded MLCC for Automotive with AEC-Q200

RCE Series

Product specifications in this catalog are as of Aug. 2022, and are subject to change or

obsolescence without notice.

Please consult the approval sheet before ordering.Please read rating and Cautions first.

Reference only

CAUTION

1. OPERATING VOLTAGE

When DC-rated capacitors are to be used in AC or ripple current circuits, be sure to maintain the Vp-p

value of the applied voltage or the Vo-p which contains DC bias within the rated voltage range. When the

voltage is started to apply to the circuit or it is stopped applying, the irregular voltage may be generated

for a transit period because of resonance or switching. Be sure to use a capacitor within rated voltage

containing these irregular voltage.

When DC-rated capacitors are to be used in input circuits from commercial power source (AC filter),

be sure to use Safety Recognized Capacitors because various regulations on withstand voltage or

impulse withstand established for each equipment should be taken into considerations.

Voltage

DC Voltage

DC+AC Voltage

AC Voltage

Pulse Voltage(1)

Pulse Voltage(2)

Positional

Vo-p

Vp-p

Vo-p

Vp-p

Measurement

2. OPERATING TEMPERATURE AND SELF-GENERATED HEAT

Keep the surface temperature of a capacitor below the upper limit of its rated operating temperature range.

Be sure to take into account the heat generated by the capacitor itself.

When the capacitor is used in a high-frequency current, pulse current or the like, it may have the self-

generated heat due to dielectric-loss. In case of Class 2 capacitors (Temp.Char. : X7R,X7S,X8L, etc.),

applied voltage should be the load such as self-generated heat is within 20 °C on the condition of

atmosphere temperature 25 °C. Please contact us if self-generated heat is occurred with Class 1

capacitors (Temp.Char. : C0G,U2J,X8G, etc.). When measuring, use a thermocouple of small thermal

capacity-K of Φ0.1mm and be in the condition where capacitor is not affected by radiant heat of other

components and wind of surroundings. Excessive heat may lead to deterioration of the capacitor’s

characteristics and reliability.

3. FAIL-SAFE

Be sure to provide an appropriate fail-safe function on your product to prevent a second damage that

may be caused by the abnormal function or the failure of our product.

4. OPERATING AND STORAGE ENVIRONMENT

The insulating coating of capacitors does not form a perfect seal; therefore, do not use or store

capacitors in a corrosive atmosphere, especially where chloride gas, sulfide gas, acid, alkali, salt or the

like are present. And avoid exposure to moisture. Before cleaning, bonding, or molding this product, verify

that these processes do not affect product quality by testing the performance of a cleaned, bonded or

molded product in the intended equipment. Store the capacitors where the temperature and relative

humidity do not exceed 5 to 40 °C and 20 to 70%. Use capacitors within 6 months.

5. VIBRATION AND IMPACT

Do not expose a capacitor or its leads to excessive shock or vibration during use.

6. SOLDERING

When soldering this product to a PCB/PWB, do not exceed the solder heat resistance specification of the

capacitor. Subjecting this product to excessive heating could melt the internal junction solder and may

result in thermal shocks that can crack the ceramic element.

7. BONDING AND RESIN MOLDING, RESIN COAT

In case of bonding, molding or coating this product, verify that these processes do not affect the quality

of capacitor by testing the performance of a bonded or molded product in the intended equipment.

In case of the amount of applications, dryness / hardening conditions of adhesives and molding resins

containing organic solvents (ethyl acetate, methyl ethyl ketone, toluene, etc.) are unsuitable, the outer

coating resin of a capacitor is damaged by the organic solvents and it may result, worst case, in a short

circuit.

The variation in thickness of adhesive or molding resin may cause a outer coating resin cracking and/or

ceramic element cracking of a capacitor in a temperature cycling.

8. TREATMENT AFTER BONDING AND RESIN MOLDING, RESIN COAT

When the outer coating is hot (over 100 °C) after soldering, it becomes soft and fragile.

So please be careful not to give it mechanical stress.

EGLEDMNO03

1/18

Reference only

Failure to follow the above cautions may result, worst case, in a short circuit and cause fuming or partial

dispersion when the product is used.

9. LIMITATION OF APPLICATIONS

Please contact us before using our products for the applications listed below which require especially

high reliability for the prevention of defects which might directly cause damage to the third party’s life,

body or property.

1. Aircraft equipment

2. Aerospace equipment

3. Undersea equipment

5. Medical equipment

7. Traffic signal equipment

4. Power plant control equipment

6. Transportation equipment (vehicles, trains, ships, etc.)

8. Disaster prevention / crime prevention equipment

9. Data-processing equipment exerting influence on public

10. Application of similar complexity and/or reliability requirements to the applications listed in the above.

NOTICE

1. CLEANING (ULTRASONIC CLEANING)

To perform ultrasonic cleaning, observe the following conditions.

Rinse bath capacity : Output of 20 watts per liter or less.

Rinsing time : 5 min maximum.

Do not vibrate the PCB/PWB directly.

Excessive ultrasonic cleaning may lead to fatigue destruction of the lead wires.

2. SOLDERING AND MOUNTING

Insertion of the Lead Wire

• When soldering, insert the lead wire into the PCB without mechanically stressing the lead wire.

• Insert the lead wire into the PCB with a distance appropriate to the lead space.

3. CAPACITANCE CHANGE OF CAPACITORS

• Class 2 capacitors (Temp.Char. : X7R,X7S,X8L etc.)

Class 2 capacitors an aging characteristic, whereby the capacitor continually decreases its capacitance

slightly if the capacitor leaves for a long time. Moreover, capacitance might change greatly depending on

a surrounding temperature or an applied voltage. So, it is not likely to be able to use for the time constant

circuit.

Please contact us if you need a detail information.

NOTE

1. Please make sure that your product has been evaluated in view of your specifications with our product

being mounted to your product.

2. You are requested not to use our product deviating from this specification.

EGLEDMNO03

2/18

Reference only

1. Application

This specification is applied to Leaded MLCC RCE series in accordance with

AEC-Q200 requirements used for Automotive Electronic equipment.

2. Rating

• Part Number Configuration

RCE

5C

2E

100

J

1

K1

Dimension Lead

(LxW) Style

H03

B

ex.)

Series

Temperature

Characteristics

Rated

Voltage

Capacitance

Tolerance

Individual

Specification

Package

• Temperature Characteristics

Code Temp. Char.

Standard

Temp.

Operating

Temp. Range

Temp.coef.

C0G

5C

-55～25°C

25～125°C

0+30/-72ppm/°C

0+/-30ppm/°C

25°C

-55～125°C

(EIA code)

• Rated Voltage

Code

2E

2J

Rated voltage

DC250V

DC630V

DC1000V

3A

• Capacitance

The first two digits denote significant figures ; the last digit denotes the multiplier of 10 in pF.

ex.) In case of 100

10×10⁰= 10pF

• Capacitance Tolerance

Code

J

Capacitance Tolerance

+/-5%

• Dimension (LxW)

Please refer to [ Part number list ].

• Lead Style

*Lead wire is "solder coated CP wire".

Code

K1

M1

Lead Style

Inside crimp type

Inside crimp taping type

Lead spacing (mm)

5.0+/-0.8

5.0+0.6/-0.2

• Individual Specification

Murata’s control code.

Please refer to [ Part number list ].

• Package

Code

A

B

Package

Taping type of Ammo

Bulk type

TEIKAKU

3/18

Reference only

3. Marking

Temp. char.

:

Letter code : A (C0G Char.)

Capacitance

Actual numbers (Less than 100pF)

3 digit numbers (100pF and over)

Code

Letter code : 4 (DC250V. Except dimension code : 1)

Letter code : 7 (DC630V. Except dimension code : 1)

Letter code : A (DC1000V.)

Capacitance tolerance

Rated voltage

:

Company name code

:

Abbreviation :

(Except dimension code : 1)

(Ex.)

Rated voltage

DC250V

DC630V

DC1000V

Dimension code

1

A

102J

A

102J

－

472

J7A

102

JAA

223

J4A

2

TEIKAKU

4/18

Reference only

4. Part number list

Unit : mm

DC

Dimension (mm)

W1

5.0

Dimension Pack

Customer

Part Number

Rated

Volt.

(V)

Cap.

Tol.

Murata Part Number

T.C.

Cap.

(LxW)

qty.

Lead Style (pcs)

L

W

F

T

RCE5C2E100J1K1H03B C0G

RCE5C2E120J1K1H03B C0G

RCE5C2E150J1K1H03B C0G

RCE5C2E180J1K1H03B C0G

RCE5C2E220J1K1H03B C0G

RCE5C2E270J1K1H03B C0G

RCE5C2E330J1K1H03B C0G

RCE5C2E390J1K1H03B C0G

RCE5C2E470J1K1H03B C0G

RCE5C2E560J1K1H03B C0G

RCE5C2E680J1K1H03B C0G

RCE5C2E820J1K1H03B C0G

RCE5C2E101J1K1H03B C0G

RCE5C2E121J1K1H03B C0G

RCE5C2E151J1K1H03B C0G

RCE5C2E181J1K1H03B C0G

RCE5C2E221J1K1H03B C0G

RCE5C2E271J1K1H03B C0G

RCE5C2E331J1K1H03B C0G

RCE5C2E391J1K1H03B C0G

RCE5C2E471J1K1H03B C0G

RCE5C2E561J1K1H03B C0G

RCE5C2E681J1K1H03B C0G

RCE5C2E821J1K1H03B C0G

RCE5C2E102J1K1H03B C0G

RCE5C2E122J1K1H03B C0G

RCE5C2E152J1K1H03B C0G

RCE5C2E182J1K1H03B C0G

RCE5C2E222J1K1H03B C0G

RCE5C2E272J1K1H03B C0G

RCE5C2E332J1K1H03B C0G

RCE5C2E392J1K1H03B C0G

RCE5C2E472J1K1H03B C0G

RCE5C2E562J1K1H03B C0G

RCE5C2E682J1K1H03B C0G

RCE5C2E822J1K1H03B C0G

RCE5C2E103J1K1H03B C0G

RCE5C2E123J2K1H03B C0G

RCE5C2E153J2K1H03B C0G

RCE5C2E183J2K1H03B C0G

250

10pF

±5%

4.0

3.5

5.0 3.15

1K1

2K1

500

12pF

15pF

4.0

5.5

3.5

4.0

5.0

6.0

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

250 10000pF

250 12000pF

250 15000pF

250 18000pF

PNLIST

5/18

Reference only

Unit : mm

DC

Dimension (mm)

W1

6.0

Dimension Pack

Customer

Part Number

Rated

Volt.

(V)

Cap.

Tol.

Murata Part Number

T.C.

Cap.

(LxW)

qty.

Lead Style (pcs)

L

W

F

T

RCE5C2E223J2K1H03B C0G

250 22000pF

±5%

5.5

4.0

5.0 3.15

2K1

1K1

2K1

500

RCE5C2J100J1K1H03B

RCE5C2J120J1K1H03B

RCE5C2J150J1K1H03B

RCE5C2J180J1K1H03B

RCE5C2J220J1K1H03B

RCE5C2J270J1K1H03B

RCE5C2J330J1K1H03B

RCE5C2J390J1K1H03B

RCE5C2J470J1K1H03B

RCE5C2J560J1K1H03B

RCE5C2J680J1K1H03B

RCE5C2J820J1K1H03B

RCE5C2J101J1K1H03B

RCE5C2J121J1K1H03B

RCE5C2J151J1K1H03B

RCE5C2J181J1K1H03B

RCE5C2J221J1K1H03B

RCE5C2J271J1K1H03B

RCE5C2J331J1K1H03B

RCE5C2J391J1K1H03B

RCE5C2J471J1K1H03B

RCE5C2J561J1K1H03B

RCE5C2J681J1K1H03B

RCE5C2J821J1K1H03B

RCE5C2J102J1K1H03B

RCE5C2J122J1K1H03B

RCE5C2J152J1K1H03B

RCE5C2J182J1K1H03B

RCE5C2J222J1K1H03B

RCE5C2J272J2K1H03B

RCE5C2J332J2K1H03B

RCE5C2J392J2K1H03B

RCE5C2J472J2K1H03B

C0G

630

10pF

12pF

4.0

5.5

3.5

4.0

5.0

6.0

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

10pF

RCE5C3A100J2K1H03B C0G 1000

RCE5C3A120J2K1H03B C0G 1000

RCE5C3A150J2K1H03B C0G 1000

RCE5C3A180J2K1H03B C0G 1000

RCE5C3A220J2K1H03B C0G 1000

RCE5C3A270J2K1H03B C0G 1000

12pF

15pF

18pF

22pF

27pF

PNLIST

6/18

Reference only

Unit : mm

DC

Dimension (mm)

W1

6.0

Dimension Pack

Customer

Part Number

Rated

Volt.

(V)

Cap.

Tol.

Murata Part Number

T.C.

Cap.

(LxW)

qty.

Lead Style (pcs)

L

W

F

T

RCE5C3A330J2K1H03B C0G 1000

RCE5C3A390J2K1H03B C0G 1000

RCE5C3A470J2K1H03B C0G 1000

RCE5C3A560J2K1H03B C0G 1000

RCE5C3A680J2K1H03B C0G 1000

RCE5C3A820J2K1H03B C0G 1000

RCE5C3A101J2K1H03B C0G 1000

RCE5C3A121J2K1H03B C0G 1000

RCE5C3A151J2K1H03B C0G 1000

RCE5C3A181J2K1H03B C0G 1000

RCE5C3A221J2K1H03B C0G 1000

RCE5C3A271J2K1H03B C0G 1000

RCE5C3A331J2K1H03B C0G 1000

RCE5C3A391J2K1H03B C0G 1000

RCE5C3A471J2K1H03B C0G 1000

RCE5C3A561J2K1H03B C0G 1000

RCE5C3A681J2K1H03B C0G 1000

RCE5C3A821J2K1H03B C0G 1000

RCE5C3A102J2K1H03B C0G 1000

33pF

±5%

5.5

4.0

5.0 3.15

2K1

500

39pF

47pF

5.5

4.0

6.0

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

PNLIST

7/18

Reference only

Unit : mm

DC

Rated

Volt.

(V)

Dimension (mm)

W1

5.0

Dimension Pack

Customer

Part Number

Cap.

Tol.

Murata Part Number

T.C.

Cap.

(LxW)

Lead Style (pcs)

H/H0

qty.

L

W

F

T

RCE5C2E100J1M1H03A C0G 250

RCE5C2E120J1M1H03A C0G 250

RCE5C2E150J1M1H03A C0G 250

RCE5C2E180J1M1H03A C0G 250

RCE5C2E220J1M1H03A C0G 250

RCE5C2E270J1M1H03A C0G 250

RCE5C2E330J1M1H03A C0G 250

RCE5C2E390J1M1H03A C0G 250

RCE5C2E470J1M1H03A C0G 250

RCE5C2E560J1M1H03A C0G 250

RCE5C2E680J1M1H03A C0G 250

RCE5C2E820J1M1H03A C0G 250

RCE5C2E101J1M1H03A C0G 250

RCE5C2E121J1M1H03A C0G 250

RCE5C2E151J1M1H03A C0G 250

RCE5C2E181J1M1H03A C0G 250

RCE5C2E221J1M1H03A C0G 250

RCE5C2E271J1M1H03A C0G 250

RCE5C2E331J1M1H03A C0G 250

RCE5C2E391J1M1H03A C0G 250

RCE5C2E471J1M1H03A C0G 250

RCE5C2E561J1M1H03A C0G 250

RCE5C2E681J1M1H03A C0G 250

RCE5C2E821J1M1H03A C0G 250

RCE5C2E102J1M1H03A C0G 250

RCE5C2E122J1M1H03A C0G 250

RCE5C2E152J1M1H03A C0G 250

RCE5C2E182J1M1H03A C0G 250

RCE5C2E222J1M1H03A C0G 250

RCE5C2E272J1M1H03A C0G 250

RCE5C2E332J1M1H03A C0G 250

RCE5C2E392J1M1H03A C0G 250

RCE5C2E472J1M1H03A C0G 250

RCE5C2E562J1M1H03A C0G 250

RCE5C2E682J1M1H03A C0G 250

RCE5C2E822J1M1H03A C0G 250

10pF

±5%

4.0

5.5

3.5

5.0 3.15 16.0

1M1

2M1

2000

12pF

15pF

3.5

4.0

5.0

6.0

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

5600pF

6800pF

8200pF

RCE5C2E103J1M1H03A C0G 250 10000pF

RCE5C2E123J2M1H03A C0G 250 12000pF

RCE5C2E153J2M1H03A C0G 250 15000pF

RCE5C2E183J2M1H03A C0G 250 18000pF

PNLIST

8/18

Reference only

Unit : mm

DC

Rated

Volt.

(V)

Dimension (mm)

W1

6.0

Dimension Pack

Customer

Part Number

Cap.

Tol.

Murata Part Number

T.C.

Cap.

(LxW)

Lead Style (pcs)

H/H0

qty.

L

W

F

T

RCE5C2E223J2M1H03A C0G 250 22000pF

±5%

5.5

4.0

5.5

4.0

5.0 3.15 16.0

2M1

1M1

2M1

2000

RCE5C2J100J1M1H03A C0G 630

RCE5C2J120J1M1H03A C0G 630

RCE5C2J150J1M1H03A C0G 630

RCE5C2J180J1M1H03A C0G 630

RCE5C2J220J1M1H03A C0G 630

RCE5C2J270J1M1H03A C0G 630

RCE5C2J330J1M1H03A C0G 630

RCE5C2J390J1M1H03A C0G 630

RCE5C2J470J1M1H03A C0G 630

RCE5C2J560J1M1H03A C0G 630

RCE5C2J680J1M1H03A C0G 630

RCE5C2J820J1M1H03A C0G 630

RCE5C2J101J1M1H03A C0G 630

RCE5C2J121J1M1H03A C0G 630

RCE5C2J151J1M1H03A C0G 630

RCE5C2J181J1M1H03A C0G 630

RCE5C2J221J1M1H03A C0G 630

RCE5C2J271J1M1H03A C0G 630

RCE5C2J331J1M1H03A C0G 630

RCE5C2J391J1M1H03A C0G 630

RCE5C2J471J1M1H03A C0G 630

RCE5C2J561J1M1H03A C0G 630

RCE5C2J681J1M1H03A C0G 630

RCE5C2J821J1M1H03A C0G 630

RCE5C2J102J1M1H03A C0G 630

RCE5C2J122J1M1H03A C0G 630

RCE5C2J152J1M1H03A C0G 630

RCE5C2J182J1M1H03A C0G 630

RCE5C2J222J1M1H03A C0G 630

RCE5C2J272J2M1H03A C0G 630

RCE5C2J332J2M1H03A C0G 630

RCE5C2J392J2M1H03A C0G 630

RCE5C2J472J2M1H03A C0G 630

RCE5C3A100J2M1H03A C0G 1000

RCE5C3A120J2M1H03A C0G 1000

RCE5C3A150J2M1H03A C0G 1000

RCE5C3A180J2M1H03A C0G 1000

RCE5C3A220J2M1H03A C0G 1000

RCE5C3A270J2M1H03A C0G 1000

10pF

12pF

3.5

4.0

5.0

6.0

15pF

18pF

22pF

27pF

33pF

39pF

47pF

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

1200pF

1500pF

1800pF

2200pF

2700pF

3300pF

3900pF

4700pF

10pF

12pF

15pF

18pF

22pF

27pF

PNLIST

9/18

Reference only

Unit : mm

DC

Rated

Volt.

(V)

Dimension (mm)

W1

6.0

Dimension Pack

Customer

Part Number

Cap.

Tol.

Murata Part Number

T.C.

Cap.

(LxW)

Lead Style (pcs)

H/H0

qty.

L

W

F

T

RCE5C3A330J2M1H03A C0G 1000

RCE5C3A390J2M1H03A C0G 1000

RCE5C3A470J2M1H03A C0G 1000

RCE5C3A560J2M1H03A C0G 1000

RCE5C3A680J2M1H03A C0G 1000

RCE5C3A820J2M1H03A C0G 1000

RCE5C3A101J2M1H03A C0G 1000

RCE5C3A121J2M1H03A C0G 1000

RCE5C3A151J2M1H03A C0G 1000

RCE5C3A181J2M1H03A C0G 1000

RCE5C3A221J2M1H03A C0G 1000

RCE5C3A271J2M1H03A C0G 1000

RCE5C3A331J2M1H03A C0G 1000

RCE5C3A391J2M1H03A C0G 1000

RCE5C3A471J2M1H03A C0G 1000

RCE5C3A561J2M1H03A C0G 1000

RCE5C3A681J2M1H03A C0G 1000

RCE5C3A821J2M1H03A C0G 1000

RCE5C3A102J2M1H03A C0G 1000

33pF

±5%

5.5

4.0

5.0 3.15 16.0

2M1

2000

39pF

47pF

4.0

6.0

56pF

68pF

82pF

100pF

120pF

150pF

180pF

220pF

270pF

330pF

390pF

470pF

560pF

680pF

820pF

1000pF

PNLIST

10/18

Reference only

5. AEC-Q200 Murata Standard Specifications and Test Methods

AEC-Q200

No.

Specification

AEC-Q200 Test Method

Test Item

Pre-and Post-Stress

Electrical Test

1

-

2

3

4

High

Appearance No defects or abnormalities.

Sit the capacitor for 1000±12h at 150±3°C. Let sit for 24±2h at

*room condition, then measure.

Temperature Capacitance Within ±3% or ±0.3pF

Exposure

(Storage)

Change

Q

(Whichever is larger)

30pF ≦ C : Q ≧ 350

10pF ≦ C < 30pF : Q ≧ 275+5C/2

10pF > C : Q ≧ 200+10C

C : Nominal Capacitance (pF)

More than 1,000MΩ or 50 MΩ・μF

(Whichever is smaller)

I.R.

Temperature Appearance No defects or abnormalities.

Perform the 1000 cycles according to the four heat treatments

listed in the following table. Let sit for 24±2 h at *room condition,

then measure.

Cycling

Capacitance Within ±5% or ±0.5pF

Change

Q

(Whichever is larger)

30pF ≦ C : Q ≧ 350

Step

1

2

3

4

10pF ≦ C < 30pF : Q ≧ 275+5C/2

10pF > C : Q ≧ 200+10C

Temp.

(°C)

Room

Temp.

Room

Temp.

-55+0/-3

125+3/-0

Time

(min.)

15±3

1

15±3

1

C : Nominal Capacitance (pF)

1,000MΩ or 50MΩ・μF min.

(Whichever is smaller)

I.R.

Moisture

Appearance No defects or abnormalities.

Capacitance Within ±5% or ± 0.5pF

Apply the 24h heat (25 to 65°C) and humidity (80 to 98%)

treatment shown below, 10 consecutive times.

Resistance

Change

Q

(Whichever is larger)

Let sit for 24±2 h at *room condition, then measure.

30pF ≦ C : Q ≧ 200

30pF > C : Q ≧ 100+10C/3

C : Nominal Capacitance (pF)

500MΩ or 25MΩ・μF min.

(Whichever is smaller)

I.R.

5

Biased

Appearance No defects or abnormalities.

Capacitance Within ±5% or ± 0.5pF

Apply the rated voltage and DC1.3+0.2/-0V (add 100kΩ resistor)

at 85±3°C and 80 to 85% humidity for 1000±12h.

Humidity

Change

Q

(Whichever is larger)

Remove and let sit for 24±2 h at *room condition, then measure.

The charge/discharge current is less than 50mA.

30pF ≦ C : Q ≧ 200

30pF > C : Q ≧ 100+10C/3

C : Nominal Capacitance (pF)

500MΩ or 25MΩ・μF min.

(Whichever is smaller)

I.R.

* “room condition” Temperature : 15 to 35°C, Relative humidity : 45 to 75%, Atmosphere pressure : 86 to 106kPa

ESRCE05D

11/18

Reference only

AEC-Q200

Test Item

No.

6

Specification

AEC-Q200 Test Method

Operational

Life

Appearance No defects or abnormalities.

Capacitance Within ±3% or ±0.3pF

Apply voltage in Table for 1000±12h at 125±3°C.

Let sit for 24±2 h at *room condition, then measure.

The charge/discharge current is less than 50mA.

Change

Q

(Whichever is larger)

30pF ≦ C : Q ≧ 350

Rated Voltage

DC250V

Test Voltage

10pF ≦ C < 30pF : Q ≧ 275+5C/2

10pF > C : Q ≧ 200+10C

150% of the rated voltage

120% of the rated voltage

DC630V, DC1kV

C : Nominal Capacitance (pF)

1,000MΩ or 50MΩ·μF min.

I.R.

(Whichever is smaller)

7

8

9

External Visual

No defects or abnormalities.

Visual inspection.

Physical Dimension

Marking

Within the specified dimensions.

To be easily legible.

Using calipers and micrometers.

Visual inspection.

10 Resistance

to Solvents

Appearance No defects or abnormalities.

Capacitance Within the specified tolerance.

Per MIL-STD-202 Method 215

Solvent 1 : 1 part (by volume) of isopropyl alcohol

3 parts (by volume) of mineral spirits

Solvent 2 : Terpene defluxer

Q

30pF ≦ C : Q ≧ 1,000

30pF > C : Q ≧ 400+20C

Solvent 3 : 42 parts (by volume) of water

C : Nominal Capacitance (pF)

More than 10,000MΩ or 500 MΩ・μF

(Whichever is smaller)

1part (by volume) of propylene glycol monomethyl ether

I.R.

1 part (by volume) of monoethanolamine

11 Mechanical

Shock

Appearance No defects or abnormalities.

Capacitance Within the specified tolerance.

Three shocks in each direction should be applied along 3

mutually perpendicular axes of the test specimen (18 shocks).

The specified test pulse should be Half-sine and should have a

duration : 0.5ms, peak value : 1500G and velocity change : 4.7m/s.

Q

30pF ≦ C : Q ≧ 1,000

30pF > C : Q ≧ 400+20C

C : Nominal Capacitance (pF)

12 Vibration

Appearance No defects or abnormalities.

Capacitance Within the specified tolerance.

The capacitor should be subjected to a simple harmonic motion

having a total amplitude of 1.5mm, the frequency being varied

uniformly between the approximate limits of 10 and 2000Hz.

The frequency range, from 10 to 2,000Hz and return to 10Hz,

should be traversed in approximately 20 min. This motion

should be applied for 12 items in each 3 mutually perpendicular

directions (total of 36 times).

Q

30pF ≦ C : Q ≧ 1,000

30pF > C : Q ≧ 400+20C

C : Nominal Capacitance (pF)

13-1 Resistance

Appearance No defects or abnormalities.

Capacitance Within ±2.5% or ±0.25pF

The lead wires should be immersed in the melted solder 1.5 to

2.0mm from the root of terminal at 260±5°C for 10±1 seconds.

to

Soldering

Change

(Whichever is larger)

No defects

Heat

Dielectric

Strength

(Between

terminals)

• Post-treatment

(Non-

Capacitor should be stored for 24±2 hours at *room condition.

Preheat)

13-2 Resistance

Appearance No defects or abnormalities.

Capacitance Within ±2.5% or ±0.25pF

First the capacitor should be stored at 120+0/-5°C for

60+0/-5 seconds. Then, the lead wires should be immersed in the

melted solder 1.5 to 2.0mm from the root of terminal at 260±5°C for

7.5+0/-1 seconds.

to

Soldering

Change

(Whichever is larger)

No defects

Heat

(On-

Dielectric

Strength

(Between

terminals)

Preheat)

• Post-treatment

Capacitor should be stored for 24±2 hours at *room condition.

Test condition

13-3 Resistance

to

Appearance No defects or abnormalities.

Capacitance Within ±2.5% or ±0.25pF

Temperature of iron-tip : 350±10°C

Soldering time : 3.5±0.5 seconds

Soldering position

Soldering

Heat

Change

(Whichever is larger)

No defects

Dielectric

Strength

(Between

terminals)

(soldering

Straight Lead : 1.5 to 2.0mm from the root of terminal.

Crimp Lead : 1.5 to 2.0mm from the end of bend.

iron method)

• Post-treatment

Capacitor should be stored for 24±2 hours at *room condition.

* “room condition” Temperature : 15 to 35°C, Relative humidity : 45 to 75%, Atmosphere pressure : 86 to 106kPa

ESRCE05D

12/18

Reference only

AEC-Q200

Test Item

No.

Specifications

AEC-Q200 Test Method

14 Thermal

Shock

Appearance No defects or abnormalities.

Capacitance Within ±5% or ±0.5pF

Perform the 300 cycles according to the two heat treatments listed

in the following table(Maximum transfer time is 20s.). Let sit for

24±2 h at *room condition, then measure.

Change

Q

(Whichever is larger)

30pF ≦ C : Q ≧ 350

Step

1

2

10pF ≦ C < 30pF : Q ≧ 275+5C/2

10pF > C : Q ≧ 200+10C

Temp.

(°C)

-55+0/-3

125+3/-0

Time

(min.)

15±3

C : Nominal Capacitance (pF)

1,000MΩ or 50MΩ·μF min.

(Whichever is smaller)

I.R.

15 ESD

Appearance No defects or abnormalities.

Capacitance Within the specified tolerance.

Per AEC-Q200-002

Q

30pF ≦ C : Q ≧ 1,000

30pF > C : Q ≧ 400+20C

C : Nominal Capacitance (pF)

I.R.

More than 10,000MΩ or 500 MΩ·μF

(Whichever is smaller)

16 Solderability

Lead wire should be soldered with uniform

coating on the axial direction over 95% of the

circumferential direction.

Should be placed into steam aging for 8h±15 min.

The terminal of capacitor is dipped into a solution of ethanol

(JIS K 8101) and rosin (JIS K 5902) (25% rosin in weight

propotion). Immerse in solder solution for 2±0.5 seconds.

In both cases the depth of dipping is up to about 1.5 to 2mm from

the terminal body.

Temp. of solder :

245±5°C Lead Free Solder (Sn-3.0Ag-0.5Cu)

235±5°C H60A or H63A Eutectic Solder

Visual inspection.

17 Electrical

Characte-

rization

Appearance No defects or abnormalities.

Capacitance Within the specified tolerance.

The capacitance, Q should be measured at 25°C at the frequency

and voltage shown in the table.

Q

30pF ≦ C : Q ≧ 1,000

30pF > C : Q ≧ 400+20C

Nominal Cap. Frequency

C ≦ 1000pF 1±0.1MHz AC0.5 to 5V(r.m.s.)

C > 1000pF 1±0.1kHz AC1±0.2V(r.m.s.)

Voltage

C : Nominal Capacitance (pF)

I.R.

Between

10,000MΩ or 50MΩ・μF min.

The insulation resistance should be measured with DC500±50V

(DC250V±25V in case of rated voltage : DC250V) at 25 °C within 2

min. of charging.

Terminals

(Whichever is smaller)

Dielectric

Strength

Between

No defects or abnormalities.

The capacitor should not be damaged when voltage in Table is

applied between the terminations for 1 to 5 seconds.

(Charge/Discharge current ≦ 50mA.)

Terminals

Rated Voltage

DC250V

Test Voltage

200% of the rated voltage

150% of the rated voltage

130% of the rated voltage

DC630V

DC1kV

Body

No defects or abnormalities.

The capacitor is placed in a container with metal balls of 1mm

diameter so that each terminal, short-circuit is kept approximately

2mm from the balls, and voltage in table is impressed for 1 to 5

seconds between capacitor terminals and metal balls.

(Charge/Discharge current ≦ 50mA.)

Insulation

Rated Voltage

DC250V

Test Voltage

DC500V

DC630V,DC1kV

DC1.3kV

* “room condition” Temperature : 15 to 35°C, Relative humidity : 45 to 75%, Atmosphere pressure : 86 to 106kPa

ESRCE05D

13/18

Reference only

AEC-Q200

Test Item

No.

Specifications

AEC-Q200 Test Method

18 Terminal

Strength

Tensile

Termination not to be broken or loosened.

As in the figure, fix the capacitor body, apply the force gradually

to each lead in the radial direction of the capacitor until reaching

10N and then keep the force applied for 10±1 seconds.

Strength

F

Bending

Strength

Termination not to be broken or loosened.

Each lead wire should be subjected to a force of 2.5N and then

be bent 90° at the point of egress in one direction. Each wire is

then returned to the original position and bent 90° in the opposite

direction at the rate of one bend per 2 to 3 seconds.

The capacitance change should be measured after 5min. at

each specified temperature step.

19 Capacitance

Temperature

Within the specified Tolerance.

25°C to 125°C : 0±30ppm/°C

-55°C to 25°C : 0+30/-72ppm/°C

Characteristics

Step Temperature(°C)

1

2

3

4

5

25±2

-55±3

25±2

125±3

25±2

The temperature coefficient is determined using the capacitance

measured in step 3 as a reference. When cycling the temperature

sequentially from step 1 through 5 (-55°C to 125°C)

the capacitance should be within the specified tolerance for the

temperature coefficient and capacitance change as Table A.

The capacitance drift is calculated by dividing the differences

between the maximum and minimum measured values in the step

1, 3 and 5 by the capacitance value in step 3.

ESRCE05D

14/18

Reference only

6. Packing specification

・Bulk type (Packing style code : B)

The size of packing case and packing way

Polyethylene bag

Partition

270 max.

125 max.

Unit : mm

340 max.

The number of packing = ^*1Packing quantity × ^*2n

*1 : Please refer to [Part number list].

*2 : Standard n = 20 (bag)

Note)

The outer package and the number of outer packing be changed by the order getting amount.

JKBCRPE02

15/18

Reference only

・Ammo pack taping type (Packing style code : A)

A crease is made every 25 pitches, and the tape with capacitors is packed zigzag into a case.

When body of the capacitor is piled on other body under it.

The size of packing case and packing way

240 max.

Position of label

340 max.

Unit : mm

51 max.

Hold down tape

Capacitor

Base tape

Hold down

tape upper

EKTRPE01

16/18

Reference only

7. Taping specification

7-1. Dimension of capacitors on tape

Inside crimp taping type < Lead Style : M1 >

Pitch of component 12.7mm / Lead spacing 5.0mm

0

P2

P

Δh1

Marking

Δh2

ΔS

e

P1

F

Φd

ΦD0

P0

Unit : mm

Item

Code

P

Dimensions

12.7+/-1.0

12.7+/-0.2

5.0+0.6/-0.2

Remarks

Pitch of component

Pitch of sprocket hole

Lead spacing

P0

F

Length from hole center to component

center

P2

6.35+/-1.3

Deviation of progress direction

They include deviation by lead bend

Deviation of tape width direction

Length from hole center to lead

Deviation along tape, left or right defect

Carrier tape width

P1

ΔS

W

3.85+/-0.7

0+/-2.0

18.0+/-0.5

9.0+0/-0.5

Position of sprocket hole

W1

Lead distance between reference and

bottom plane

H0

16.0+/-0.5

Protrusion length

0.5 max.

4.0+/-0.1

0.5+/-0.05

0.6+/-0.3

1.5 max.

Diameter of sprocket hole

Lead diameter

ΦD0

Φd

t1

Total tape thickness

They include hold down tape

thickness

Total thickness of tape and lead wire

t2

2.0 max. (Dimension code : W)

1.0 max. (except as above)

11.0+0/-1.0

Δh1

Δh2

L

Deviation across tape

Portion to cut in case of defect

Hold down tape width

W0

W2

e

9.5 min.

Hold down tape position

Coating extension on lead

1.5+/-1.5

Up to the end of crimp

ETP1M101A

17/18

Reference only

ꢀꢀ7-2. Splicing way of tape

1) Adhesive force of tape is over 3N at test condition as below.

W

Hold down tape

Base tape

2) Splicing of tape

ꢀꢀꢀa) When base tape is spliced

•Base tape shall be spliced by cellophane tape.

(Total tape thickness shall be less than 1.05mm.)

Progress direction

in production line

Hold down tape

Base tape

About 30 to 50

No lifting for the

Cellophane tape

direction of

progressing

Unit : mm

ꢀꢀꢀb) When hold down tape is spliced

ꢀꢀꢀ •Hold down tape shall be spliced with overlapping.

(Total tape thickness shall be less than 1.05mm.)

20 to 30

Hold down tape

Base tape

Unit : mm

Progress direction

in production line

ꢀꢀꢀc) When both tape are spliced

•Base tape and hold down tape shall be spliced with splicing tape.

ETP2R01

18/18


型号：	RCE5C2E103J1M1H03A
厂家：	muRata
描述：	汽车[动力总成 / 安全设备],汽车[信息娱乐 / 舒适设备],植入式以外的医疗器械设备 [GHTF A/B/C] 医疗医疗器械
文件：	总19页 (文件大小：761K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

RCE5C2E103J1M1H03A [MURATA]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E