SFPKA455KD4A-R1 [MURATA]
Ceramic Discriminators for Communications Equipment; 陶瓷鉴通讯设备型号: | SFPKA455KD4A-R1 |
厂家: | muRata |
描述: | Ceramic Discriminators for Communications Equipment |
文件: | 总78页 (文件大小:1389K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr)/
Ceramic Discriminators
for Communications
Equipment
Cat.No.P05E-16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
EU RoHS Compliant
s
All the products in this catalog comply with EU RoHS.
s
EU RoHS is "the European Directive 2011/65/EU on the Restriction of the Use
of Certain Hazardous Substances in Electrical and Electronic Equipment."
For more details, please refer to our website 'Murata's Approach for EU RoHS'
s
(http://www.murata.com/info/rohs.html).
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
CERAFILr and "CERAFIL" in this catalog are
1
CONTENTS
the trademarks of Murata Manufacturing Co., Ltd.
2
3
Part Numbering
Products Guide
2
4
1
2
3
4
5
6
CERAFILr kHz SMD Type SFPKA Series
5
4
CERAFILr kHz SMD Type CFUKG Series
CERAFILr kHz SMD Type CFUKG_X Series
CERAFILr kHz SMD Type CFUKF Series
CERAFILr kHz SMD Type CFWKA Series
CERAFILr kHz SMD Type CFWKA_Y Series
7
9
5
11
13
15
17
21
23
25
31
32
34
35
37
39
41
43
45
47
49
51
52
65
70
74
6
7
kHz SMD Type CERAFILr Notice
7
8
CERAFILr MHz SMD Type SFECF10M7 Series
CERAFILr MHz SMD Type SFSCE10M7 Series
8
MHz SMD Type CERAFILr Notice
9
SMD Type CERAFILr Standard Land Pattern Dimensions
kHz SMD Type CERAFILr Packaging
10
11
12
13
14
15
16
17
18
MHz SMD Type CERAFILr Packaging
9
CERAFILr Plastic Case General Use CFULA Series
10
11
12
13
14
15
16
CERAFILr Plastic Case General Use CFWLA Series
CERAFILr Plastic Case Miniaturized Type CFULB Series
CERAFILr Plastic Case Miniaturized Type CFWLB Series
CERAFILr Plastic Case Group Delay Flat Type CFULA_Y Series
CERAFILr Plastic Case Group Delay Flat Type CFWLA_Y Series
CERAFILr Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
CERAFILr Plastic Case Group Delay Flat Type CFWLB_Y Series
Plastic Case Type CERAFILr Minimum Quantity/Notice
17
18
kHz Type Ceramic Discriminators
MHz Type Ceramic Discriminators
Ceramic Discriminators Notice
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
o Part Numbering
Ceramic Filters (CERAFILr) for IF
(Part Number)
-R0
SF
P
KA 455K D4A
SF
E
CF 10M7 DF00 S0 -R0
q
w
e
r
t
y
u
qProduct ID
wOscillating/Element
tProduct Specification
Product ID
Oscillating/Element
Product Specification
Code
U
W
P
4 Elements Area Expansion mode
6 Elements Area Expansion mode
4 Elements Area Expansion mode
2 Elements Thickness Expansion mode
2 Elements Thickness Shear mode
Three-digit alphanumerics express pass bandwidth,
center frequency tolerance and design type.
CF
D4A
SFE/S/J series are expressed by four-digit alphanumerics.
Ceramic Filters
SF
E
yIndividual Specification
S
Individual Specification Code
Code
eStructure/Size
Expressed by three-digit alphanumerics.
001
SFE/S/J series are expressed by two-digit alphanumerics.
Structure/Size
Chip Type
Code
Cp/Kp
Lp
With standard type,
is omitted.
y
Lead Type
uPackaging
p is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
Chip type is only applied for SF series.
Packaging
Code
-B0
Bulk
Embossed Taping ø=180mm
Embossed Taping ø=330mm
-R0
rNominal Center Frequency
-R1
Expressed by four-digit alphanumerics. The unit is hertz (Hz). If
the unit is "kHz", it is expressed by three figures plus "K." If the
unit is "MHz", a decimal point is expressed by the capital letter
"M."
Embossed taping is applied to chip type.
2
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators for IF (kHz)
(Part Number)
X
16 -B0
CD
B
LB 450K
C
A
q
w
e
r
t
y
u
i
o
qProduct ID
yApplication
Product ID
Application
Standard
Code
CD
Ceramic Discriminators
A
L
Application with coil
wOscillating
uElement Type
Oscillating
Code
Area Expansion mode
Element Type
Low-capacitance
High-capacitance
B
Code
X
Y
eStructure/Size
Structure/Size
Chip Type
Code
Cp/Kp
Lp
iIC
Lead Type
IC
Code
is "A" or subsequent code, which indicates the size. It varies
depending on vibration mode and number of elements.
p
Applicable IC Control code
16
oPackaging
rNominal Center Frequency
Packaging
Bulk
Code
-B0
Expressed by four-digit alphanumerics. The unit is in hertz (Hz).
Capital letter "K" following three figures expresses the unit of
"kHz."
Embossed Taping ø=180mm
Embossed Taping ø=330mm
-R0
-R1
tDetection
Embossed taping is applied to chip type. With non-standard products,
one letter indicating "Individual Specification" is added between
Detection
Code
"
Applicable IC" and " Package Specification code."
o
i
Quadrature Detection
C
Ceramic Discriminators for IF (MHz)
(Part Number)
CD
S
CB 10M7 GF 001 -R0
q
w
e
r
t
y
u
qProduct ID
tProduct Specification
Product ID
Product Specification
Code
CD
Discriminators
Two-digit alphanumerics express
type, center frequency, rank, others
GF
wOscillation
yIC
Oscillation
Code
Thickness Shear mode
IC
S
Code
Applicable IC Control Code
001
eStructure/Size
uPackaging
Structure/Size
Code
Chip Type
Packaging
Cp
Code
is expressed "A" or subsequent code, which indicates the size.
p
Embossed Taping ø=180mm
-R0
With non-standard products, an alphanumerics indicating "Individual
Specification" is added between " IC" and " Packaging."
y
u
rNominal Center Frequency
Expressed by four-digit alphanumerics. The unit is in hertz (MHz).
Decimal point is expressed by capital letter "M."
3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Products Guide
oSMD Type (kHz)
Applications
Series
General Use
Attenuation
(dB) min.
Type
6dB Bandwidth (kHz) min.
A
B
C
D
E
F
G
H
J
K
L
Within 455 80 or 100kHz
17.5 15 12.5 10
7.5
6
4.5
3
2
1.5
1
SFPKA455KM
(4 Elements)
–
–
–
–
–
–
o
o
o
o
o
o
o
o
o
–
–
–
–
–
–
27 (G to H; 25)
High Selectivity
Series
(Plastic Case Type)
CFUKG455KM
(4 Elements)
–
27 (G; 25)
Narrow Bandwidth
GDT Flat Type
Miniature Series
(Plastic Case Type)
CFUKG455KMX
(4 Elements)
–
o
–
–
o
o
–
–
o
–
–
o
–
o
o
–
o
–
o
–
o
–
–
–
–
–
–
–
–
–
–
–
–
–
27 (G to H; 25)
GDT Flat Type
Miniature Series
(Plastic Case Type)
CFUKF455KM
(4 Elements)
25 (D to E; 23)
GDT Flat Type
High Selectivity
SMD Series
CFWKA450KBFY
(6 Elements)
–
–
–
45
50
(Plastic Case Type)
High Selectivity
SMD Series
(Plastic Case Type)
CFWKA450KM
(6 Elements)
–
–
o
o
o
o
–
oLead Type (kHz)
Applications
Series
General Use
6dB Bandwidth (kHz) min.
Attenuation
Type
(dB) min.
A
B
C
D
E
F
G
H
J
2
K
1.5
–
L
Within 455 80 or 100kHz
1
(G; 25)
17.5 15 12.5 10
7.5
o
o
o
o
o
o
o
o
6
4.5
o
o
o
o
o
o
o
o
3
CFULA455KM (4 Elements)
CFWLA455KM (6 Elements)
CFULB455KM (4 Elements)
CFWLB455KM (6 Elements)
CFULA455KMY (4 Elements)
CFWLA455KMY (6 Elements)
CFULB455KMY (4 Elements)
CFWLB455KMY (6 Elements)
27
–
–
–
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
o
–
–
High Selectivity
Low Profile Series
(H; 35)
35 (H, J; 60)
–
(G; 25)
o
o
o
–
–
27
–
–
–
High Selectivity
Miniature Series
(H, J; 35)
35 (H, J; 55)
–
–
–
25 (D to G; 23)
–
–
–
GDT Flat Type
Series
40
–
o
–
–
–
–
25 (D to G; 23)
–
–
–
–
GDT Flat Type
Miniature Series
40 (F; 35)
–
o
–
–
–
4
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
1
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL kHz SMD Type SFPKA Series
r
7.±±±.ꢀ
ꢀ.±±±.ꢀ
The SFPKA series is comprised of small, high-performance,
economical, thin (5.0mm) filters consisting of 4 ceramic
elements. Their innovative construction is perfect for
shrinking mobile communication products such as cordless
phones, pagers and transceivers.
MARKING
EIAJ
CODE
±.9±±.1
Features
c
1.5±±.ꢀ
2.±±±.ꢀ
1.5±±.ꢀ
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
1.6±±.ꢀ
2.±±±.ꢀ
Connection
(1): Input
(2): Ground
(ꢀ): Output
(1) (2) (ꢀ)
3. They are slim, at only 5.0mm maximum thickness.
4. The bandwidth ranges from D to H.
(in mm)
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Ripple
(dB)
Part Number
Frequency (fo) Bandwidth
(kHz)
(kHz)
455
±1.5kHꢀ
fn±10.0
min.
fn±20.0 max.
27 min.
4.0 max.
2.0 max.
SFPKA455KD4A-R1
SFPKA455KE4A-R1
SFPKA455KF4A-R1
SFPKA455KG1A-R1
SFPKA455KH1A-R1
1500
1500
1500
1500
2000
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±7kHꢀ]
455
±1.5kHꢀ
fn±7.5
min.
fn±15.0 max. 27 min. 6.0 max. 1.5 max.
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±5kHꢀ]
fn±12.5 max. 27 min. 6.0 max. 1.5 max.
455
±1.5kHꢀ
fn±6.0
min.
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±4kHꢀ]
455
±1.0kHꢀ
fn±4.5
min.
fn±10.0 max. 25 min. 6.0 max. 1.5 max.
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±3kHꢀ]
fn±±.0 max. 35 min. 6.0 max. 1.5 max.
455
±1.0kHꢀ
fn±3.0
min.
[within 40dB] [within fn±100kHꢀ] [at minimum loss point] [within fn±2kHꢀ]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHꢀ.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(ꢀ)
(1)
(2)
RF Voltmeter
Rg
E1
R2
E2
S.S.G.
±dBm
(1): Input
(2): Ground
(ꢀ): Output
Rg+R1=R2=Input/Output Impedance
E1: S.S.G. Output Voltage
5
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
1
SFPKA455KE4A-R1
SFPKA455KE4A-R1
0
0
400
10
20
30
40
10
20
30
40
360
320
280
240
50
60
50
60
200
160
70
70
120
80
90
80
90
80
40
100
200
100
0
430
455
480
300
400
500
600
700
800
900
1000
Frequency (kHz)
Frequency (kHz)
6
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL kHz SMD Type CFUKG Series
r
2
The CFUKG series is comprised of small, high-performance,
thin (4.0mm) filters consisting of 4 ceramic elements.
Their innovative construction is perfect for shrinking
mobile communication products such as pocket pagers
and cellular phones.
MARKING
EIAJ
CODE
1.2±±.1
C±.5
1.±±±.1
1.±±±.ꢀ
1.±±±.1
1.±±±.ꢀ
4.±±±.ꢀ
6.±±±.ꢀ
Features
c
1.5±±.ꢀ
ꢀ.±±±.ꢀ
1.5±±.ꢀ
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
Connection
(1): Input
(2): Output
(ꢀ): Ground
(1)
(2)
(ꢀ)
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
(in mm)
4. The bandwidth ranges from D to G.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Ripple
(dB)
Part Number
Frequency (fo) Bandwidth
(kHz)
(kHz)
455
1.5kꢀH
fn 10.0
min.
fn 20.0 max.
27 min.
4.0 max.
2.0 max.
CFUKG455KD4A-R0
CFUKG455KE4A-R0
CFUKG455KF4A-R0
CFUKG455KG1A-R0
1500
1500
1500
1500
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 7kꢀH]
455
1.5kꢀH
fn 7.5
min.
fn 15.0 max. 27 min. 6.0 max. 1.5 max.
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 5kꢀH]
fn 12.5 max. 27 min. 6.0 max. 1.5 max.
455
1.5kꢀH
fn 6.0
min.
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 4kꢀH]
455
1.0kꢀH
fn 4.5
min.
fn 10.0 max. 25 min. 6.0 max. 1.5 max.
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 3kꢀH]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kꢀH.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(2)
Rg
RF Voltmeter
Connection
E1
R2
E2
(ꢀ)
S.S.G.
±dBm
(1): Input
(2): Output
(ꢀ): Ground
Rg+R1=R2=Input/Output Impedance
7
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFUKG455KE4A-R0
CFUKG455KE4A-R0
±
4±±
ꢀ±±
2±±
1±±
±
±
1±
2±
ꢀ±
4±
1±
2±
ꢀ±
4±
2
5±
6±
5±
6±
7±
7±
8±
9±
8±
9±
1±±
2±±
1±±
4ꢀ±
455
48±
ꢀ±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
Frequency (kHz)
Frequency (kHz)
8
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL kHz SMD Type CFUKG_X Series
r
The CFUKG_X series is comprised of small, high-
performance, thin (4.0mm) filters consisting of 4
ceramic elements.
3
MARKING
EIAJ
CODE
The filters exhibit an extremely flat GDT
characteristic combined with a narrow bandwidth.
The filters are recommended for narrow band digital
communication applications.
1.2±±.1
C±.5
1.±±±.1
1.±±±.ꢀ
1.±±±.1
1.±±±.ꢀ
4.±±±.ꢀ
6.±±±.ꢀ
1.5±±.ꢀ
ꢀ.±±±.ꢀ
1.5±±.ꢀ
Connection
(1): Input
(2): Output
(ꢀ): Ground
Features
c
(1)
(2)
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
(ꢀ)
(in mm)
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from E to H.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Stop
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Ripple
(dB)
GDT Deviation
(µs)
Part Number
Frequency (fo) Bandwidth Bandwidth
(kHz)
(kHz)
(kHz)
455
1.5kHꢀ
fn 7.5
min.
fn 17.5 max.
27 min.
6.0 max.
1.0 max.
25.0 max.
CFUKG455KE4X-R0
CFUKG455KF4X-R0
CFUKG455KG1X-R0
CFUKG455KH1X-R0
1500
1500
1500
1500
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 5kHꢀ] [within fn 5kHꢀ]
455
1.5kHꢀ
fn 6.0
min.
fn 15.0 max.
27 min.
6.0 max.
1.0 max.
25.0 max.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 4kHꢀ] [within fn 4kHꢀ]
455
1.0kHꢀ
fn 4.5
min.
fn 12.5 max.
25 min.
6.0 max.
1.0 max.
25.0 max.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 3kHꢀ] [within fn 3kHꢀ]
455
1.0kHꢀ
fn 3.0
min.
fn 10.0 max.
25 min.
7.0 max.
1.0 max.
25.0 max.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 2kHꢀ] [within fn 2kHꢀ]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHꢀ.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(2)
Rg
RF Voltmeter
Connection
E1
R2
E2
(ꢀ)
S.S.G.
±dBm
(1): Input
(2): Output
(ꢀ): Ground
Rg+R1=R2=Input/Output Impedance
9
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFUKG455KE4X-R0
CFUKG455KE4X-R0
±
±
2±±
1±
2±
ꢀ±
4±
1±
2±
ꢀ±
4±
15±
1±±
3
5±
6±
5±
6±
7±
7±
5±
8±
9±
8±
9±
1±±
2±±
1±±
±
4ꢀ±
455
48±
ꢀ±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
Frequency (kHz)
Frequency (kHz)
10
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL kHz SMD Type CFUKF Series
r
The CFUKF series is comprised of small, high-performance,
thin (4.0mm) filters consisting of 4 ceramic elements.
The filters exhibit an extremely flat GDT
characteristic.
MARKING
EIAJ
CODE
1.2±±.1
C±.5
4
1.±±±.1
1.±±±.ꢀ
1.±±±.1
1.±±±.ꢀ
The filters are recommended for digital
communication applications and are perfect in hand-held
cellular phones, etc.
4.±±±.ꢀ
6.±±±.ꢀ
1.5±±.ꢀ
ꢀ.±±±.ꢀ
1.5±±.ꢀ
Connection
(1): Input
(2): Output
(ꢀ): Ground
Features
c
(1)
(2)
1. The filters are mountable by automatic placers.
2. The filters can be reflow soldered and withstand
washing.
(ꢀ)
(in mm)
3. They are slim, at only 4.0mm maximum thickness,
and have a small mounting area (7.5x6.0mm)
enabling flexible PCB design.
4. The bandwidth ranges from A to E.
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Stop
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Ripple
(dB)
GDT Deviation
(µs)
Part Number
Frequency (fo) Bandwidth Bandwidth
(kHz)
(kHz)
(kHz)
455
2.0kꢀH
fn 17.5
min.
fn 40.0 max.
25 min.
4.0 max.
1.0 max.
15.0 max.
CFUKF455KA2X-R0
CFUKF455KB4X-R0
CFUKF455KC4X-R0
CFUKF455KD1X-R0
CFUKF455KE1X-R0
1000
1000
1000
1500
1500
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 12kꢀH] [within fn 12kꢀH]
455
1.5kꢀH
fn 15.0
min.
fn 35.0 max.
25 min.
5.0 max.
1.0 max.
15.0 max.
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 10kꢀH] [within fn 10kꢀH]
455
1.5kꢀH
fn 12.5
min.
fn 30.0 max.
25 min.
6.0 max.
1.0 max.
15.0 max.
[within fn 8kꢀH]
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 8kꢀH]
455
1.0kꢀH
fn 10.0
min.
fn 25.0 max.
23 min.
7.0 max.
1.0 max.
20.0 max.
[within fn 7kꢀH]
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 7kꢀH]
455
1.0kꢀH
fn 7.5
min.
fn 20.0 max.
23 min.
8.0 max.
1.0 max.
20.0 max.
[within fn 5kꢀH]
[within 40dB] [within fn 100kꢀH] [at minimum loss point] [within fn 5kꢀH]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kꢀH.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(2)
Rg
RF Voltmeter
Connection
E1
R2
E2
(ꢀ)
S.S.G.
±dBm
(1): Input
(2): Output
(ꢀ): Ground
Rg+R1=R2=Input/Output Impedance
11
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFUKF455KE1X-R0
CFUKF455KE1X-R0
±
2±±
15±
±
1±
2±
ꢀ±
4±
1±
2±
ꢀ±
4±
1±±
5±
6±
5±
6±
4
7±
7±
5±
8±
9±
8±
9±
1±±
2±±
1±±
±
4ꢀ±
455
48±
ꢀ±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
Frequency (kHz)
Frequency (kHz)
12
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL kHz SMD Type CFWKA Series
r
The CFWKA series is comprised of small, high-performance,
thin (3.0mm) filters consisting of 6 ceramic elements.
The filters are recommend for pager or hand-held
cellular phones.
MARKING
EIAJ
CODE
Dot marking
Sealing
1.2 0.1
C0.3
1.2 0.1
1.2 0.1
1.2 0.1
Features
c
5.5 3.0
11.5
5.5 3.0
1.5 0.3
Sealing
3.0
1. The filters are mountable by automatic placers.
1.5 0.3
5
2. The filters can be reflow soldered.
(1): Input
(2): Output
(3)(4): Ground
3. They are slim, at only 3.0mm maximum thickness.
4. The filters are wide bandwidth, flat GDT within
pass band.
(1)
(4)
(2)
(3)
Tolerance 0.3mm
in mm
(
)
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Nominal Center
3dB
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Stop Band Att.(2)
(dB)
Insertion Loss
(dB)
Ripple
(dB)
Part Number
Frequency (fn) Bandwidth Bandwidth
(kHz)
(kHz)
(kHz)
fn±10.0
min.
fn±20.0 max.
[within 50dB] [within fn±100kꢀH]
50 min.
4.0 max.
3.0 max.
CFWKA450KDFA-R0
CFWKA450KEFA-R0
CFWKA450KEFA001-R0
CFWKA450KFFA-R0
CFWKA450KGFA-R0
450.0
-
-
1500
1500
1500
1500
1500
[at minimum loss point] [within fn±±kꢀH]
fn±±.5
min.
fn±15.0 max.
[within 50dB] [within fn±100kꢀH]
50 min.
6.0 max.
3.0 max.
450.0
450.0
450.0
450.0
-
-
[at minimum loss point] [within fn±5kꢀH]
fn±6.5
min.
fn±15.0 max.
55 min.
50 min.
4.0 max.
[at fn]
3.0 max.
[within fn±6.5kꢀH]
-
[within 50dB] [fn±18 to ±33kꢀH] [within fn±100kꢀH]
fn±6.0
min.
fn±12.5 min.
[within 50dB] [within fn±100kꢀH]
50 min.
6.0 max.
3.0 max.
-
-
-
-
[at minimum loss point] [within fn±4kꢀH]
fn±4.5
min.
fn±11.0 max.
[within 50dB] [within fn±100kꢀH]
50 min.
6.0 max.
2.0 max.
[at minimum loss point] [within fn±3kꢀH]
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(4)
(2)
(3)
Rg
E1
RF Voltmeter
Connection
R2
E2
S.S.G.
0dBm
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
13
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFWKA450KEFA001-R0
CFWKA450KEFA001-R0
0
0
400
300
200
100
0
10
4
8
20
30
40
12
16
50
60
20
24
28
32
36
70
80
5
90
40
100
440.0
450.0
460.0
430
455
480
Frequency (kHz)
Frequency (kHz)
CFWKA450KEFA001-R0
0
10
20
30
40
50
60
70
80
90
100
200
300
400
500
600
700
800
900
1000
Frequency (kHz)
14
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL kHz SMD Type CFWKA_Y Series
r
The CFWKA_Y series is comprised of small, high-
performance, thin (3.0mm) filters consisting of 6
ceramic elements. The filters are recommend for
digital communication applications and are perfect
in hand-held cellular phones.
Y50
B 1
EIAJ
CODE
Dot marking
Sealing
C0.3 1.2 0.1
1.5 0.3
1.2 0.1
1.2 0.1
1.2 0.1
5.5 3.0
11.5
5.5 3.0
Sealing
3.0
1.5 0.3
Features
c
1. The filters are mountable by automatic placers, and
(1)
(4)
(2)
(3)
(1): Input
(2): Output
(3)(4): Ground
can be reflow soldered.
2. They are slim, at only 3.0mm maximum thickness.
3. The filters are wide bandwidth, flat GDT within
pass band.
Tolerance 0.3mm
in mm
6
(
)
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Nominal Center
3dB
6dB
Stop
Stop Band
Attenuation
(dB)
Spurious
Response
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
GDT Deviation
(µs)
Part Number
Frequency (fn) Bandwidth Bandwidth Bandwidth
(kHz)
(kHz)
(kHz)
(kHz)
fn 11.5
min.
fn 13.0
min.
fn 30.0 max.
45 min.
4.0 max.
20 min.
30.0 max.
CFWKA450KBFY001-R0
450.0
1000
[within 50dB] [within fn 100kꢀH] [at minimum loss point] [within 0.1 to 1.0MꢀH] [within fn 10kꢀH]
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(4)
(2)
(3)
Rg
E1
RF Voltmeter
Connection
R2
E2
S.S.G.
0dBm
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
15
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
0
0
10
20
30
40
50
60
70
80
90
100
200
150
100
50
2
4
6
8
10
12
14
16
18
20
0
420
430
440
450
460
470
480
200
300
400
500
600
700
800
900
1000
Frequency (kHz)
Frequency (kHz)
6
16
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
kHz SMD Type CERAFIL Notice
r
SFPKA/CFUKG/CFUKF Series Notice
c
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
0EAK
conditions.
(260ꢀC max.)
260
230
Heating
(230ꢀC)
Pre-heating
100
(150-180ꢀC)
Gradual
Cooling
30 sec.
min.
60-120 sec.
ꢄꢅ SECꢃ
max.
120 sec.
min.
(2) Soldering Iron
Electrode is directly soldered with the tip of soldering iron
at +350 5ꢀC for 3.0 0.5 seconds.
(3) Other
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
2. Wash
(1) Cleaning Solvent
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
7ATER ꢀ$EMINERALIZED 7ATERꢁꢂ #LEANING 7ATER 3OLUTION
(Cleanthrough-750H, Pine Alpha 100S), Silicon
ꢀ4ECHNOCARE &27ꢁ
(2) Cleaning Conditions
s )MMERSION 7ASH
2 minutes max. in above solvent at +60ꢀC max.
s 3HOWER OR 2INSE 7ASH
2 minutes max. in above solvent at +60ꢀC max.
(3) Notice
s 7HEN COMPONENTS ARE IMMERSED IN SOLVENTꢂ BE SURE TO
maintain the temperature of components below the
temperature of solvent.
s 0LEASE DO NOT USE ULTRASONIC CLEANINGꢃ
s 4OTAL WASHING TIME SHOULD BE ꢄ MINUTES MAXIMUMꢃ
s 0LEASE ENSURE THE COMPONENT IS THOROUGHLY EVALUATED IN
your application circuit.
s 0LEASE DO NOT USE CHLORINEꢂ PETROLEUM OR ALKALI CLEANING
solvent.
s )F YOU PLAN TO USE ANY OTHER TYPES OF SOLVENTSꢂ PLEASE
consult with Murata or Murata representative prior to
using.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
Continued on the following page.
17
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
kHz SMD Type CERAFIL Notice
r
Continued from the preceding page.
o Storage and Operating Conditions
1. Product Storage Condition
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
Please store the products in a room where the
temperature/humidity is stable, and avoid such places
where there are large temperature changes. Please store
the products under the following conditions:
Temperature: -10 to +40°C
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
Humidity: 15 to 85% R.H.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. If the component is cleaned, please confirm that the
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
reliability has not been degraded.
2. The components, packed in a moisture-proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
package cracks or reliability degradation caused by
thermal stress. When unpacked, store the component in
an atmosphere of below 25°C and below 65%R.H., and
solder within 48 hours.
applying a direct current to the output of ceramic filters.
18
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
kHz SMD Type CERAFIL Notice
r
CFWKA Series Notice
c
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
Peak
conditions.
(260ꢀC max.)
260
230
Heating
(230ꢀC)
Pre-heating
100
(150-180ꢀC)
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Electrode is directly soldered with the tip of soldering iron
at +350 5ꢀC for 3.0 0.5 seconds.
(3) Other
Do not use strong acidity flux, more than 0.2wt% chlorine
content, in reflow soldering.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
Do not apply conformal coating onto the component as
it's not hermetically sealed.
o Storage and Operating Conditions
1. Product Storage Condition
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40ꢀC
Humidity: 15 to 85% R.H.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because the
solderability may be degraded due to storage under poor
conditions.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
Please confirm solderability and characteristics for the
products regularly.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Continued on the following page.
19
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
kHz SMD Type CERAFIL Notice
r
Continued from the preceding page.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid applying a
direct current to the output of ceramic filters.
20
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL MHz SMD Type SFECF10M7 Series
r
1.ꢀ 0.1
ꢀ.45 0.ꢁ
SFECF10M7 series for FM receivers are small,
high-performance and super thin (1.4mm max.) filters.
The piezoelectric element is sandwiched by the
ceramics substrate.
Input electrode
marker
(0.6)
(0.6)(0.6)
0 to 0.4
0 to 0.4
They have 1.4mm max. thickness and a small mounting
area (3.45x3.1mm).
(1.ꢁ8)(1.ꢁ8)
SFECF series and CDSCB series (MHz Discriminator)
enable customers to make VICS/RKE/TPMS set very thin
and small.
0.ꢀ min. 0.ꢀ min.
0.65 0.ꢀ 0.7 0.ꢀ 0.65 0.ꢀ
(1): Input
(ꢁ)(5): Ground
(ꢀ)(4): No connect
(6): Output
(1)
(6)
(ꢀ)
(4)
(ꢁ)
(5)
: EIAJ Monthly Code
): Reference
(
(1.ꢁ8)(1.ꢁ8)
0 to 0.ꢀ5
Features
c
(in mm)
0 to 0.ꢀ5
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.4mm max. thickness, and
have a small mounting area (3.45x3.1mm) enabling
flexible PCB design.
7
3. Various bandwidths are available. Select a
suitable type in accordance with the desired
selectivity.
4. Operating Temperature Range:
-20 to +80 (°C)(Standard Type)
-40 to +85 (°C)(High-reliability Type)
Storage Temperature Range:
-40 to +85 (°C)(Standard Type)
-55 to +85 (°C)(High-reliability Type)
Standard Type
Center
Nominal Center
3dB
Bandwidth
(kHz)
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
Attenuation Insertion Loss Ripple
Part Number
Frequency Frequency (fn)
(kHz)
(dB)
(dB)
(fo) (MHz)
(MHz)
10.700
30kHz
30 min.
30 min.
SFECF10M7HA00-R0
SFECF10M7HF00-R0
SFECF10M7GA00-R0
SFECF10M7GF00-R0
SFECF10M7FA00-R0
SFECF10M7FF00-R0
SFECF10M7EA00-R0
SFECF10M7DA0001-R0
SFECF10M7DF00-R0
-
180 40kHz
fn 25 min.
230 50kHz
fn 45 min.
280 50kHz
fn 65 min.
330 50kHz
420 min.
470 max.
4.0 2.0dB
1.0 max.
330
330
330
330
330
330
330
330
330
[within 9MHz to fo] [within fo to 12MHz]
8.0max.
[at fn]
30 min.
25 min.
-
10.700
510 max.
510 max.
560 max.
590 max.
620 max.
700 max.
950 max.
990 max.
1.0 max.
1.0 max.
1.0 max.
1.0 max.
1.0 max.
1.0 max.
3.0 max.
3.0 max.
[within 9MHz to fn] [within fn to 12MHz]
10.700
30kHz
30 min.
30 min.
-
3.5 2.0dB
[within 9MHz to fo] [within fo to 12MHz]
8.0max.
[at fn]
30 min.
25 min.
-
10.700
[within 9MHz to fn] [within fn to 12MHz]
10.700
30kHz
30 min.
30 min.
-
3.0 2.0dB
[within 9MHz to fo] [within fo to 12MHz]
7.0max.
[at fn]
30 min.
25 min.
-
10.700
[within 9MHz to fn] [within fn to 12MHz]
10.700
30kHz
30 min.
30 min.
-
3.0 2.0dB
3.0 2.0dB
[within 9MHz to fo] [within fo to 12MHz]
10.700
30kHz
35 min.
25 min.
-
[within 9MHz to fo] [within fo to 12MHz]
6.0max.
[at fn]
20 min.
20 min.
-
10.700
fn 150 min.
[within 9MHz to fn] [within fn to 12MHz]
Area of Attenuation: [within 20dB]
Area of Insertion Loss: at minimum loss point Area of Ripple: within 3dB B.W.
Center frequency (fo) defined by center of 3dB bandwidth.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
21
• Please reaꢃ rating anꢃ !CAUTION (for storage, operating, rating, solꢃering, mounting anꢃ hanꢃling) in this catalog to prevent smoꢀing anꢃ/or burning, etc.
• This catalog has only typical specifications because there is no space for ꢃetaileꢃ specifications. Therefore, please review our proꢃuct specifications or consult the approval sheet for proꢃuct specifications before orꢃering. Nov.ꢂꢁ,ꢂ011
!Note
P02E.pꢃf
High-reliability Type
Center
Nominal Center
3dB
Spurious
Attenuation
(1) (dB)
Spurious
Attenuation
(2) (dB)
Input/Output
Impedance
(ohm)
Attenuation Insertion Loss Ripple
Part Number
Frequency Frequency (fn) Bandwidth
(kHz)
(dB)
(dB)
(fo) (MHz)
(MHz)
(kHz)
10.700
±±0ꢀkH
±0 min.
±0 min.
SFECF10M7HA00S0-R0
SFECF10M7HF00S0-R0
SFECF10M7GA00S0-R0
SFECF10M7GF00S0-R0
SFECF10M7FA00S0-R0
SFECF10M7FF00S0-R0
SFECF10M7EA00S0-R0
SFECF10M7DF00S0-R0
-
180 ±ꢁ0ꢀkH
ꢁ70 max.
ꢁ.0±ꢂ.0ꢃd
1.0 max.
±±0
±±0
±±0
±±0
±±0
±±0
±±0
±±0
[within 9MkH to fo] [within fo to 1ꢂMkH]
8.0max.
[at fn]
±0 min.
ꢂ2 min.
-
10.700
fn±ꢂ2 min.
ꢂ±0 ±20ꢀkH
fn±ꢁ2 min.
ꢂ80 ±20ꢀkH
fn±62 min.
±±0 ±20ꢀkH
fn±1ꢁ2 min.
210 max.
210 max.
260 max.
290 max.
6±0 max.
700 max.
990 max.
1.0 max.
1.0 max.
1.0 max.
1.0 max.
1.0 max.
1.0 max.
±.0 max.
[within 9MkH to fn] [within fn to 1ꢂMkH]
10.700
±±0ꢀkH
±0 min.
±0 min.
-
±.2±ꢂ.0ꢃd
[within 9MkH to fo] [within fo to 1ꢂMkH]
8.0max.
[at fn]
±0 min.
ꢂ2 min.
-
10.700
-
[within 9MkH to fn] [within fn to 1ꢂMkH]
10.700
±±0ꢀkH
±0 min.
±0 min.
±.0±ꢂ.0ꢃd
[within 9MkH to fo] [within fo to 1ꢂMkH]
7.0max.
[at fn]
±0 min.
ꢂ2 min.
-
10.700
-
[within 9MkH to fn] [within fn to 1ꢂMkH]
10.700
±±0ꢀkH
±0 min.
±0 min.
±.0±ꢂ.0ꢃd
[within 9MkH to fo] [within fo to 1ꢂMkH]
6.0max.
[at fn]
ꢂ0 min.
ꢂ0 min.
-
10.700
[within 9MkH to fn] [within fn to 1ꢂMkH]
7
Area of Attenuation: [within ꢂ0ꢃd]
Area of Insertion Loss: at minimum loss point Area of Ripple: within ±ꢃd d.W.
Center frequency (fo) ꢃefineꢃ by center of ±ꢃd banꢃwiꢃth.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocꢀing capacitor. Avoiꢃ applying a ꢃirect current to the output of ceramic filters.
The orꢃer quantity shoulꢃ be an integral multiple of the "Minimum Quantity" shown in pacꢀage page in this catalog.
Test Circuit
c
(3)
(2)
(4)
(5)
R1
(1)
(6)
Rg
RF
Voltmeter
E1
C2
R2
E2
S.S.G.
Rg = 50Ω R1 = 280Ω 5ꢀ R2 = 330Ω 5ꢀ
C2 = 10 2 ꢁF (ꢂInlꢃudIg ꢄtrꢅa nꢅꢁꢅndtꢅIne ꢅIu ꢂIꢁꢃt nꢅꢁꢅndtꢅIne
of RF Volt Meter)
(1): ꢂIꢁꢃt
(2)(5): GroꢃIu
(3)(4): No noIIent
(6): Oꢃtꢁꢃt
E1: S.S.G. Oꢃtꢁꢃt Voltꢅge
Frequency Characteristics
c
SFECF10M7FA00-R0
SFECF10M7FA00-R0
0
7.0
6.0
5.0
4.0
3.0
2.0
1.0
0
10
20
30
40
50
60
1
2
3
4
5
6
7
0.0
70
10.300
10.500
10.700
10.900
11.100
8.700
9.700
10.700
11.700
12.700
FreqꢃeIna (MHz)
FreqꢃeIna (MHz)
ꢂꢂ
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL MHz SMD Type SFSCE10M7 Series
r
4.5
0.4
(1)
(4)
(2)
SFSCE series are chip surface mount filters available for
3dB bandwidth at 700kHz to 1.3MHz. (more than twice
width compared with current types)
They have 1.0mm max. thickness and small mounting area
(4.5x3.8mm).
(3)
(4.0)
Features
c
(4-R0.3)
(1): Input
(2): Output
(3): No Connect
(4): Ground
1. The filters are mountable by automatic placers.
2. They are slim, at only 1.0mm max. thickness, and
have a small mounting area (4.5x3.8mm) enabling
flexible PCB design.
(0.3)
(4)
(1)
(3)
(2)
: EIAJ Monthly Code
Tolerance unless
*
otherwise specified: 0.1
(
): Reference
0.6 1.1
0.15
(2.25)
(in mm)
3. Available lead (Pb) free solder reflow.
4. Operating temperature range:
-20 to +80 (°C)
Storage temperature range:
-40 to +85 (°C)
8
Applications
c
1. SS digital communication system
2. Digital wireless audio
3. PHS Evolution system
4. RFID Reader Writer
5. RKE
Nominal Center
3dB
Stop
Bandwidth
(MHz)
Spurious
Response
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Ripple
(dB)
GDT Deviation
(µs)
Part Number
Frequency (fn) Bandwidth
(MHz)
(kHz)
fn 500.0
min.
2.2 max. (Total)
[within 20dB]
6.0 max.
2.0 max.
30/25 min.
0.6 max.
SFSCE10M7WF03-R0
SFSCE10M7WF04-R0
SFSCE10M7WF05-R0
10.700
470
470
470
[at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn 400kHz]
fn 400.0
min.
1.8 max. (Total)
[within 20dB]
6.0 max.
1.5 max.
35/25 min.
0.6 max.
10.700
10.700
[at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn 325kHz]
fn 325.0
min.
1.7 max. (Total)
[within 20dB]
6.0 max.
1.5 max.
40/30 min.
0.6 max.
[at minimum loss point] [within 3dB Bandwidth] [within 5.7MHz to fn / fn to 15.7MHz] [within fn 250kHz]
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
(4)
(1)
(3)
(2)
R1
Rg
R2
C2
S.S.G.
RF
Voltmeter
(1): Input
(2): Output
(3): No Connect
(4): Ground
R1+Rg=R2=Input/Output Impedance, Rg=50Ω
C2=10pF (Including stray capacitance and Input capacitance of RF Voltmeter)
E1: S.S.G. Output Voltage
23
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
SFSCE10M7WF03-R0
SFSCE10M7WF03-R0
0
2
4
6
8
2.0
1.6
1.2
0.8
0.4
0
20
40
60
80
10
0.0
6.700
8.700
10.700
12.700
14.700
9.500
9.900
10.300
10.700
11.100
11.500
11.900
Frequency (MHz)
Frequency (MHz)
8
24
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
MHz SMD Type CERAFIL Notice
r
SFECF10M7 Series Notice
c
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
Peak
(260ꢀC max.)
conditions.
260
230
Heating
(230ꢀC)
Pre-heating
(150-180ꢀC)
100
Gradual
Cooling
30 sec.
min.
40 sec.
max.
120 sec.
min.
60-120 sec.
(2) Soldering Iron
Filter is soldered at +350 5ꢀC for 3.0 0.5 seconds. ꢁhe
soldering iron should not touch the filter while soldering.
(3) Condition for Placement Machines
ꢁhe component is recommended with placement
machines that employ optical placement capabilities. ꢁhe
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) ꢁhe component may be damaged if excess
[Component Direction]
mechanical stress is applied to it mounted on the
printed circuit board.
Place the
component
lateral to the
direction in
which stress
acts.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
[Component Layout Close to Board]
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. ꢁo prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
Perforation
B
Susceptibility to
stress is in the order
of : A>C>B
C
A
Slit
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
Continued on the following page.
25
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
MHz SMD Type CERAFIL Notice
r
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
Humidity: 15 to 85% R.H.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
3. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
2. The components, packed in a moisture proof bag (dry
pack), are sensitive to moisture. The following treatment
is required before applying reflow soldering, to avoid
reliability degradation caused by thermal stress. When
unpacked, store the component in an atmosphere of
reflow 30°C and below 60%R.H., and solder within 1
week.
26
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
MHz SMD Type CERAFIL Notice
r
SFSCE10M7WF03-R0 Notice
c
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
Peak
conditions.
(2405C max.)
240
2ꢀ0
Heating
(2ꢀ05C)
Pre-heating
100
(1±0-1805C)
Gradual
Cooling
ꢀ0 sec.
min.
60-120 sec.
ꢀ0 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +280±±5C for ꢀ.0±0.± seconds. ꢁhe
soldering iron should not touch the filter while soldering.
(ꢀ) Condition for Placement Machines
ꢁhe component is recommended with placement
machines that employ optical placement capabilities. ꢁhe
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) ꢁhe component may be damaged if excess
[Component Layout Close to Board]
mechanical stress is applied to it mounted on the
printed circuit board.
Susceptibility to
stress is in the order
of : A>C>B
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
Perforation
A
B
C
Slit
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. ꢁo prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
[Component Direction]
Place the compon-
ent laterally to the
direction in which
stress acts.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
Continued on the following page.
27
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
MHz SMD Type CERAFIL Notice
r
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
Humidity: 15 to 85% R.H.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
28
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
MHz SMD Type CERAFIL Notice
r
SFSCE10M7WF04/05-R0 Notice
c
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
Peak
conditions.
(2605C max.)
260
2ꢀ0
Heating
(2ꢀ05C)
Pre-heating
100
(1±0-1805C)
Gradual
Cooling
ꢀ0 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Filter is soldered at +280±±5C for ꢀ.0±0.± seconds. ꢁhe
soldering iron should not touch the filter while soldering.
(ꢀ) Condition for Placement Machines
ꢁhe component is recommended with placement
machines that employ optical placement capabilities. ꢁhe
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) ꢁhe component may be damaged if excess
[Component Layout Close to Board]
mechanical stress is applied to it mounted on the
printed circuit board.
Susceptibility to
stress is in the order
of : A>C>B
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
Perforation
A
B
C
Slit
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. ꢁo prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
[Component Direction]
Place the compon-
ent laterally to the
direction in which
stress acts.
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component.
(f) Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
Continued on the following page.
29
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
MHz SMD Type CERAFIL Notice
r
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to + 40°C
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
Humidity: 15 to 85% R.H.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
30
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
SMD Type CERAFIL Standard Land Pattern Dimensions
r
SFPKA Series
CFUKG/CFUKF Series
c
c
c
c
0.7
0.7
6.95
2.0
1.2
1.4
1.2
2.475
1.1
2.0
0.925
2.0
(in mm)
(in mm)
CFWKA Series
SFECF10M7 Series
c
11.5
5.5
3.0
3.0
(6)
(5)
(4)
1.2
(1)
(2)
(3)
4-R3.0
0.1
0.1
(1): Input
(2)(5): Ground
(3)(4): No connect
(6): Output
0.8 0.6 0.8 0.6 0.8
1.8
(in mm)
It shows solder resist land pattern.
(in mm)
SFSCE10M Series
1.05
1.4
0.1
0.1
(4)
(3)
(2)
(1)
0.5
(1): Input
(2): Output
(3): No Connect
(4): Ground
It shows solder resist land pattern.
(in mm)
31
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
kHz SMD Type CERAFIL Packaging
r
Minimum Quantity
c
Part Number
ø180mm
ø330mm
SFPKA
CFUKG
CFUKF
CFWKA
1,000
450
450
350
SFPKA Series
c
Dimensions of Carrier Tape
Dimensions of Reel
Trailer
160 to 190
Leader
Cover film
4.0 0.1
+0.1
ø1.5 -0
2.0 0.1
Empty Components
ø13.0 0.2
Empty
240 to 280
400 to 560
2.2 0.5
12.0 0.1
5.3 0.1
User direction of feed
Cover film
Label
17.5 0.5
21.5 1.0
7.4 0.1
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ
(in mm)
CFUKG/CFUKF Series
c
Dimensions of Carrier Tape
Dimensions of Reel
Trailer
160 to 190
Leader
Cover film
4.0 0.1
ø1.5
2.0 0.1
+0.1
-0.0
Empty Components
Empty
160 to 200
400 to 560
2.0 0.2
ø13.0 0.5
8.0 0.1
4.2 0.1
5SER DIRECTION OF FEED
Cover film
17.0 1.0
19.4 0.3
6.7 0.1
6.3 0.1
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ
(in mm)
Continued on the following page.
32
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
kHz SMD Type CERAFIL Packaging
r
Continued from the preceding page.
CFWKA Series
c
Dimensions of Carrier Tape
Dimensions of Reel
Trailer
Leader
4.0 0.1
160 to 190
Cover film
2.0 0.1
+0.1
ø1.5
-0.0
Empty Components
Empty
240 to 280
2.0 0.2
ø1ꢀ.0 0.5
400 to 560
25.5 1.0
29.9 1.0
0.4 0.1
ꢀ.2 0.1
12.0 0.1
User direction of feed
Cover film
8.1 0.1
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ
7.7 0.1
(in mm)
33
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
MHz SMD Type CERAFIL Packaging
r
Minimum Quantity
c
Part Number
ø180mm
2,000
SFECF
SFSCE
1,500
SFECF10M7 Series
c
Dimensions of Carrier Tape
Dimensions of Reel
Trailer
160 to 190
Leader
Cover film
4.0 0.1
Chip filter
ø1.55 0.05 2.0 0.05
Empty
240 to 280
Empty Components
ø13.0 0.5
400 to 560
2.0 0.5
+0.1
-0.05
4.0 0.1
Peeling strength
(0.1 to 0.7N)
3.35
17.0 1.0
(3°)
10° max.
+1.0
13.0
Cover film
-0
User direction of feed
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ
( ): Reference
(in mm)
SFSCE10M7 Series
c
Dimensions of Carrier Tape
Dimensions of Reel
Trailer
ꢃꢉꢂ TO ꢃꢊꢂ
,EADER
Cover film
ꢁꢀꢂ ꢂꢀꢃ
ꢂꢀꢈ ꢂꢀꢂꢅ
ꢄꢀꢂ ꢂꢀꢂꢅ
ꢃꢀꢅꢅ ꢂꢀꢂꢅ
%MPTY
ꢄꢁꢂ TO ꢄꢇꢂ
%MPTY #OMPONENTS
ꢃꢈꢀꢂ ꢂꢀꢅ
ꢁꢂꢂ TO ꢅꢉꢂ
ꢃꢀꢃ ꢂꢀꢃ
ꢃꢀꢅꢅ ꢂꢀꢂꢅ
ꢄꢀꢂ ꢂꢀꢅ
ꢇꢀꢂ ꢂꢀꢃ
0EELING STRENGTH
ꢂꢀꢃ TO ꢂꢀꢆ.
ꢃꢆꢀꢂ ꢃꢀꢂ
ꢋꢃꢀꢂ
ꢃꢈꢀꢂ
ꢌꢂ
(3°)
Cover film
ꢁꢀꢈ ꢂꢀꢃ
ꢃꢂ MAXꢀ
5SER DIRECTION OF FEED
s 0ART .UMBER MARKED SIDE IS ALWAYS FACING UPꢀ
(in mm)
34
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoꢀing and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case General Use CFULA Series
r
8.0 0.3
CFULA series are high selectivity ceramic filters,
which consist of 4 ceramic elements connected in a
ladder form.
MARKING
EIAJ
CODE
They are most suitable for digital communications
and cellular phones because of their improved GDT
characteristics.
0.8 0.ꢀ
0.6 0.ꢀ
0.ꢀꢁ 0.0ꢁ
2.7 0.3
Features
c
ꢀ.2 0.ꢁ
1. High selectivity
(2) (ꢀ)
(3)
Connection
(ꢀ): Input
(2): Ground
(3): Output
2. A variety of bandwidths available
3. Excellent GDT characteristics are available within
pass bandwidth.
3.3 0.ꢁ
(in mm)
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Part Number
455
±2.0ꢀHꢁ
fn±15.0
min.
fn±30.0 max.
[within 40dB]
27 min.
[within fn±100ꢀHꢁ]
4.0 max.
[at minimum loss point]
CFULA455KB2A-B0
CFULA455KC2A-B0
CFULA455KD4A-B0
CFULA455KE4A-B0
CFULA455KF4A-B0
CFULA455KG1A-B0
CFULA455KH1A-B0
1500
1500
1500
1500
2000
2000
2000
±
455
±2.0ꢀHꢁ
fn±12.5
min.
fn±24.0 max.
[within 40dB]
27 min.
[within fn±100ꢀHꢁ]
4.0 max.
[at minimum loss point]
455
±1.5ꢀHꢁ
fn±10.0
min.
fn±20.0 max.
[within 40dB]
27 min.
[within fn±100ꢀHꢁ]
4.0 max.
[at minimum loss point]
455
±1.5ꢀHꢁ
fn±7.5
min.
fn±15.0 max.
[within 40dB]
27 min.
[within fn±100ꢀHꢁ]
6.0 max.
[at minimum loss point]
455
±1.5ꢀHꢁ
fn±6.0
min.
fn±12.5 max.
[within 40dB]
27 min.
[within fn±100ꢀHꢁ]
6.0 max.
[at minimum loss point]
455
±1.0ꢀHꢁ
fn±4.5
min.
fn±10.0 max.
[within 40dB]
25 min.
[within fn±100ꢀHꢁ]
6.0 max.
[at minimum loss point]
455
±1.0ꢀHꢁ
fn±3.0
min.
fn±±.0 max.
[within 40dB]
35 min.
[within fn±100ꢀHꢁ]
6.0 max.
[at minimum loss point]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455ꢀHꢁ.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocꢀing capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in pacꢀage page in this catalog.
Test Circuit
c
(3)
(ꢀ) (2)
Rꢀ
Rg
Eꢀ
R2
E2
RF Voltmeter
Connection
(ꢀ): Input
S.S.G.
0dBm
(2): Ground
(3): Output
Rg+Rꢀ=R2=Input/Output Impedance
35
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFULA455KE4A-B0
CFULA455KE4A-B0
0
0
200
ꢀꢁ0
ꢀ0
20
30
40
ꢀ0
20
30
40
ꢀ00
ꢁ0
0
ꢁ0
60
ꢁ0
60
70
70
80
90
80
90
ꢀ00
200
ꢀ00
300
400
ꢁ00
600
700
800
900
ꢀ000
430
4ꢁꢁ
480
Frequency (kHz)
Frequency (kHz)
9
36
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case General Use CFWLA Series
r
11.±±±.5
Ceramic filter CFWLA series are low profile high
selectivity ceramic filters, which use 6 elements in
ladder form.
MARKING
EIAJ
CODE
They are best suitable to high-class transceivers,
cordless telephones and amateur radios.
±.8±±.1
Features
1. Low profile, high selectivity
2. Available bandwidths are B to J as standard
3. Easily mountable on any PC board
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
c
±.15
±.6±±.1
2.9±±.3
2.6±±.3
1.2±±.5
2.9—±±±.3.3
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(4)
(3)
(2) (1)
(5)
(in mm)
2.3±±.5
2.±±±.3
Nominal Center
6dB
Stop
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Ripple
(dB)
Part Number
Frequency (fn) Bandwidth Bandwidth
(kHz)
(kHz)
(kHz)
fn±15.0
min.
fn±30.0 maꢀ.
35 min.
4.0 maꢀ.
3.0 maꢀ.
CFWLA455KBFA-B0
CFWLA455KCFA-B0
CFWLA455KDFA-B0
CFWLA455KEFA-B0
CFWLA455KFFA-B0
CFWLA455KGFA-B0
CFWLA455KHFA-B0
CFWLA455KJFA-B0
455.0
1500
1500
1500
1500
2000
2000
2000
2000
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±10kꢁH]
fn±12.5
min.
fn±24.0 maꢀ. 35 min. 4.0 maꢀ. 3.0 maꢀ.
455.0
455.0
455.0
455.0
455.0
455.0
455.0
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±8kꢁH]
fn±20.0 maꢀ. 35 min. 4.0 maꢀ. 3.0 maꢀ.
fn±10.0
min.
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±±kꢁH]
fn±±.5
min.
fn±15.0 maꢀ. 35 min. 6.0 maꢀ. 3.0 maꢀ.
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±5kꢁH]
fn±12.5 maꢀ. 35 min. 6.0 maꢀ. 3.0 maꢀ.
10
fn±6.0
min.
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±4kꢁH]
fn±4.5
min.
fn±10.0 maꢀ. 35 min. 6.0 maꢀ. 2.0 maꢀ.
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±3kꢁH]
fn±9.0 maꢀ. 60 min. 6.0 maꢀ. 2.0 maꢀ.
fn±3.0
min.
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±2kꢁH]
fn±2.0
min.
fn±±.5 maꢀ. 60 min. ±.0 maꢀ. 2.0 maꢀ.
[within 50dB] [within fn±100kꢁH] [at minimum loss point] [within fn±1.5kꢁH]
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
(5)
R1
(1) (2) (3) (4)
RF Voltmeter
Connection
(1): Input
R2
E2
Rg
E1
(5): Output
S.S.G.
±dBm
(2)(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
3±
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFWLA455KEFA-B0
CFWLA455KEFA-B0
±
4±±
3±±
2±±
1±±
±
±
1±
2±
3±
4±
1±
2±
3±
4±
5±
6±
5±
6±
7±
7±
8±
9±
8±
9±
1±±
2±±
1±±
43±
455
48±
3±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
Frequency (kHz)
Frequency (kHz)
10
38
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case Miniaturized Type CFULB Series
r
6.5±±.3
CFULB series ceramic filters are miniature, high-
MARKING
performance ceramic filters composed of piezoelectric
EIAJ
CODE
elements connected in a ladder form.
These filters, only 6.3mm high, are 65% the
volume of conventional types.
±.7±±.1
±.5±±.1
They are well suited for miniaturizing various kinds
of communications equipment, pocket pagers, car
radios, cordless telephones and mobile telephones.
±.15±±.±5
±.8±±.3
2.4±±.3 1.8±±.3
±.7±±.3
Connection
(1)
(2)
(1): Input
(2): Output
(3)
Features
c
(3) (4)
: Ground
}
(4)
1. Miniature and high selectivity
(in mm)
2. A variety of bandwidths are available
3. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
Frequency (fo)
(kHz)
6dB
Bandwidth
(kHz)
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Part Number
455
±2.0kꢀz
fn±15.0
min.
fn±30.0 maꢁ.
[within 40dB]
27 min.
[within fn±100kꢀz]
4.0 maꢁ.
[at minimum loss point]
CFULB455KB2A-B0
CFULB455KC2A-B0
CFULB455KD4A-B0
CFULB455KE4A-B0
CFULB455KF4A-B0
CFULB455KG1A-B0
CFULB455KH1A-B0
CFULB455KJ1A-B0
1500
1500
1500
1500
2000
2000
2000
2000
455
±2.0kꢀz
fn±12.5
min.
fn±24.0 maꢁ.
[within 40dB]
27 min.
[within fn±100kꢀz]
4.0 maꢁ.
[at minimum loss point]
455
±1.5kꢀz
fn±10.0
min.
fn±20.0 maꢁ.
[within 40dB]
27 min.
[within fn±100kꢀz]
4.0 maꢁ.
[at minimum loss point]
455
±1.5kꢀz
fn±7.5
min.
fn±15.0 maꢁ.
[within 40dB]
27 min.
[within fn±100kꢀz]
6.0 maꢁ.
[at minimum loss point]
455
±1.5kꢀz
fn±6.0
min.
fn±12.5 maꢁ.
[within 40dB]
27 min.
[within fn±100kꢀz]
6.0 maꢁ.
[at minimum loss point]
11
455
±1.0kꢀz
fn±4.5
min.
fn±10.0 maꢁ.
[within 40dB]
25 min.
[within fn±100kꢀz]
6.0 maꢁ.
[at minimum loss point]
455
±1.0kꢀz
fn±3.0
min.
fn±±.0 maꢁ.
[within 40dB]
35 min.
[within fn±100kꢀz]
6.0 maꢁ.
[at minimum loss point]
455
±1.0kꢀz
fn±2.0
min.
fn±7.5 maꢁ.
[within 40dB]
35 min.
[within fn±100kꢀz]
6.0 maꢁ.
[at minimum loss point]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kꢀz.
CFULB455K_series filters are 4-element ceramic filters and miniature versions of CFULA455K_series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(3)
(2)
(4)
Rg
RF Voltmeter
Connection
E1
R2
E2
S.S.G.
±dBm
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
3±
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFULB455KE4A-B0
CFULB455KE4A-B0
±
±
2±±
1±
2±
3±
4±
1±
2±
3±
4±
15±
1±±
5±
6±
5±
6±
7±
7±
5±
8±
9±
8±
9±
1±±
2±±
1±±
±
3±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
43±
455
48±
Frequency (kHz)
Frequency (kHz)
11
40
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case Miniaturized Type CFWLB Series
r
9.5±±.3
CFWLB series ceramic filters are miniature, high-
MARKING
performance ceramic filters composed of piezoelectric
EIAJ
CODE
elements connected in a ladder form.
These filters, only 6.3mm high, are 67% the volume
of conventional types.
±.7±±.1
±.5±±.1
They are well suited for miniaturizing various kinds
±.15±±.±5
of communications equipment, pocket pagers, pagers,
2.7±±.3 2.8±±.3
2.5±±.3
±.9±±.3
car radios, cordless telephones and mobile telephones.
Connection
(1): Input
(2): Output
(3)
(2)
(1)
(4)
±.7±±.3
(3)
(5)
(4) : Ground
(5)
Features
1. Miniature and high selectivity
c
}
(in mm)
2. A variety of bandwidths are available.
3. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Nominal Center
Frequency (fn)
(kHz)
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
Part Number
CFWLB455KBFA-B0
CFWLB455KCFA-B0
CFWLB455KDFA-B0
CFWLB455KEFA-B0
CFWLB455KEFA004-B0
CFWLB455KFFA-B0
CFWLB455KGFA-B0
CFWLB455KHFA-B0
CFWLB455KJFA-B0
Bandwidth
(kHz)
fn±15.0
min.
fn±30.0 maꢀ.
[within 50dB]
35 min.
[within fn±100kꢁz]
4.0 maꢀ.
[at minimum loss point]
455.0
455.0
455.0
455.0
455.0
455.0
455.0
455.0
455.0
1500
1500
1500
1500
1500
2000
2000
2000
2000
fn±12.5
min.
fn±24.0 maꢀ.
[within 50dB]
35 min.
[within fn±100kꢁz]
4.0 maꢀ.
[at minimum loss point]
fn±10.0
min.
fn±20.0 maꢀ.
[within 50dB]
35 min.
[within fn±100kꢁz]
4.0 maꢀ.
[at minimum loss point]
fn±7.5
min.
fn±15.0 maꢀ.
[within 50dB]
35 min.
[within fn±100kꢁz]
6.0 maꢀ.
[at minimum loss point]
fn±7.5
min.
fn±15.0 maꢀ.
[within 60dB] [within fn±15kꢁz to 30kꢁz]
60 min.
5.0 maꢀ.
[at fn]
fn±6.0
min.
fn±12.5 maꢀ.
[within 50dB]
35 min.
[within fn±100kꢁz]
6.0 maꢀ.
[at minimum loss point]
12
fn±4.5
min.
fn±10.0 maꢀ.
[within 50dB]
35 min.
[within fn±100kꢁz]
6.0 maꢀ.
[at minimum loss point]
fn±3.0
min.
fn±±.0 maꢀ.
[within 50dB]
55 min.
[within fn±100kꢁz]
6.0 maꢀ.
[at minimum loss point]
fn±2.0
min.
fn±7.0 maꢀ.
[within 50dB]
55 min.
[within fn±100kꢁz]
7.0 maꢀ.
[at minimum loss point]
CFWLB455K_series filters are 4-element ceramic filters and miniature versions of CFWLA455K_series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
41
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Test Circuit
c
R1
(1)
(2)
(3) (4) (5)
Rg
RF Voltmeter
Connection
E1
R2
E2
S.S.G.
±dBm
(1): Input
(2): Output
(3)(4)(5): Ground
Rg+R1=R2=Input/Output Impedance
Frequency Characteristics
c
CFWLB455KEFA-B0
CFWLB455KEFA-B0
±
±
2±±
15±
1±
2±
3±
4±
1±
2±
3±
4±
1±±
5±
±
5±
6±
5±
6±
7±
7±
8±
9±
8±
9±
1±±
2±±
1±±
43±
455
48±
3±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
Frequency (kHz)
Frequency (kHz)
12
42
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case Group Delay Flat Type CFULA_Y Series
r
8.0 0.3
CFULA_Y series are high selectivity ceramic filters,
MARKING
which consist of 4 ceramic elements connected in a
EIAJ
CODE
ladder form.
They are most suitable for digital communications
and cellular phones because of their improved GDT
0.8 0.ꢀ
characteristics.
0.ꢀꢁ 0.0ꢁ
2.7 0.3
Features
c
0.6 0.ꢀ
ꢀ.2 0.ꢁ
1. High selectivity
(2) (ꢀ)
(3)
Connection
(ꢀ): Input
(2): Ground
(3): Output
2. A variety of bandwidths are available.
3. Excellent GDT characteristics are available within
pass bandwidth.
3.3 0.ꢁ
(in mm)
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
GDT Deviation
(µs)
Part Number
Frequency (fo) Bandwidth
(dB)
(kHz)
(kHz)
455
1.5kHꢀ
fn 15.0
min.
fn 35.0 max.
25 min.
5.0 max.
15.0 max.
CFULA455KB4Y-B0
CFULA455KC4Y-B0
CFULA455KD1Y-B0
CFULA455KE1Y-B0
CFULA455KF1Y-B0
CFULA455KG1Y-B0
1500
1500
1500
1500
2000
2000
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 10kHꢀ]
455
1.5kHꢀ
fn 12.5
min.
fn 30.0 max. 25 min. 6.0 max. 15.0 max.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 8kHꢀ]
fn 25.0 max. 23 min. 7.0 max. 20.0 max.
455
1.0kHꢀ
fn 10.0
min.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 7kHꢀ]
455
1.0kHꢀ
fn 7.5
min.
fn 20.0 max. 23 min. 8.0 max. 20.0 max.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 5kHꢀ]
fn 17.5 max. 23 min. 9.0 max. 20.0 max.
455
1.0kHꢀ
fn 6.0
min.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 4kHꢀ]
455
1.0kHꢀ
fn 4.5
min.
fn 15.0 max. 23 min. 10.0 max. 20.0 max.
[within 40dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 3kHꢀ]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHꢀ.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
13
Test Circuit
c
(3)
(ꢀ) (2)
Rꢀ
Rg
Eꢀ
R2
E2
RF Voltmeter
Connection
(ꢀ): Input
S.S.G.
0dBm
(2): Ground
(3): Output
Rg+Rꢀ=R2=Input/Output Impedance
43
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFULA455KE1Y-B0
CFULA455KE1Y-B0
0
ꢀ0
20
30
40
ꢁ0
60
70
80
90
ꢀ00
0
ꢀ0
20
30
40
ꢁ0
60
70
80
200
ꢀꢁ0
ꢀ00
ꢁ0
90
ꢀ00
200
0
300
400
ꢁ00
600
700
800
900
ꢀ000
430
4ꢁꢁ
480
Frequency (kHz)
Frequency (kHz)
13
44
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case Group Delay Flat Type CFWLA_Y Series
r
11.±±±.5
CFWLA_Y series are high selectivity ceramic filters,
MARKING
which consist of 6 ceramic elements connected in a
EIAJ
CODE
ladder form.
They are most suitable for digital communications
and mobile telephones because of their improved
GDT characteristics.
±.8±±.1
±.15
±.6±±.1
Features
1. High selectivity
2. A variety of bandwidths are available
3. Excellent GDT characteristics are available within
pass bandwidth.
2.9±±.3
c
2.6±±.3
1.2±±.5
2.9—±±±.3.3
Connection
(1): Input
(2)(3)(4): Ground
(5): Output
(4)
(3)
(2) (1)
(5)
(in mm)
2.3±±.5
2.±±±.3
4. Easily mounted on a printed circuit board
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
Center
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
GDT Deviation
(µs)
Part Number
Frequency (fo) Bandwidth
(kHz)
(kHz)
455
1.5kHꢀ
fn 15.0
min.
fn 30.0 max.
40 min.
6.0 max.
30.0 max.
CFWLA455KB4Y-B0
CFWLA455KC4Y-B0
CFWLA455KD1Y-B0
CFWLA455KE1Y-B0
CFWLA455KF1Y-B0
CFWLA455KG1Y-B0
1500
1500
1500
1500
2000
2000
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 10kHꢀ]
455
1.5kHꢀ
fn 12.5
min.
fn 2ꢁ.5 max. 40 min. ꢁ.0 max. 30.0 max.
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 8kHꢀ]
fn 25.0 max. 40 min. 8.0 max. 30.0 max.
455
1.0kHꢀ
fn 10.0
min.
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn ꢁkHꢀ]
455
1.0kHꢀ
fn ꢁ.5
min.
fn 20.0 max. 40 min. 9.0 max. 30.0 max.
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 5kHꢀ]
fn 1ꢁ.5 max. 40 min. 10.0 max. 40.0 max.
455
1.0kHꢀ
fn 6.0
min.
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 4kHꢀ]
455
1.0kHꢀ
fn 4.5
min.
fn 15.0 max. 40 min. 11.0 max. 40.0 max.
[within 50dB] [within fn 100kHꢀ] [at minimum loss point] [within fn 3kHꢀ]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kHꢀ.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
14
Test Circuit
c
(5)
R1
(1) (2) (3) (4)
RF Voltmeter
Connection
(1): Input
R2
E2
Rg
E1
(5): Output
S.S.G.
±dBm
(2)(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
45
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFWLA455KE1Y-B0
CFWLA455KE1Y-B0
±
1±
2±
3±
4±
5±
6±
7±
8±
9±
1±±
±
1±
2±
3±
4±
5±
6±
7±
8±
4±±
3±±
2±±
1±±
±
9±
1±±
2±±
3±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
43±
455
48±
Frequency (kHz)
Frequency (kHz)
14
46
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case Group Delay Flat Type Miniaturized Type CFULB_Y Series
r
6.5±±.3
Ceramic filter CFULB_Y series are miniature and high-
MARKING
performance filters. These filters, only 6.3mm
EIAJ
CODE
high, are 65% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
±.7±±.1
±.5±±.1
±.15±±.±5
Features
1. Miniature, flat GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
c
±.8±±.3
2.4±±.3 1.8±±.3
±.7±±.3
Connection
(1)
(2)
(1): Input
(2): Output
(3)
(3) (4)
: Ground
}
(4)
(in mm)
Center
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
GDT Deviation
(µs)
Part Number
Frequency (fo) Bandwidth
(kHz)
(kHz)
455
1.5kꢀz
fn 15.0
min.
fn 35.0 maꢁ.
25 min.
5.0 maꢁ.
15.0 maꢁ.
CFULB455KB4Y-B0
CFULB455KC4Y-B0
CFULB455KD1Y-B0
CFULB455KE1Y-B0
CFULB455KF1Y-B0
CFULB455KG1Y-B0
1500
1500
1500
1500
2000
2000
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 10kꢀz]
455
1.5kꢀz
fn 12.5
min.
fn 30.0 maꢁ. 25 min. 6.0 maꢁ. 15.0 maꢁ.
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 8kꢀz]
fn 25.0 maꢁ. 23 min. 7.0 maꢁ. 20.0 maꢁ.
455
1.0kꢀz
fn 10.0
min.
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 7kꢀz]
455
1.0kꢀz
fn 7.5
min.
fn 20.0 maꢁ. 23 min. 8.0 maꢁ. 20.0 maꢁ.
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 5kꢀz]
fn 17.5 maꢁ. 23 min. 9.0 maꢁ. 20.0 maꢁ.
455
1.0kꢀz
fn 6.0
min.
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 4kꢀz]
455
1.0kꢀz
fn 4.5
min.
fn 15.0 maꢁ. 23 min. 10.0 maꢁ. 20.0 maꢁ.
[within 40dB] [within fn 100kꢀz] [at minimum loss point] [within fn 3kꢀz]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kꢀz.
CFULB455K_Y series filters are 4-element ceramic filters and miniature versions of CFULA455K_Y series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(3)
(2)
(4)
15
Rg
RF Voltmeter
Connection
E1
R2
E2
S.S.G.
±dBm
(1): Input
(2): Output
(3)(4): Ground
Rg+R1=R2=Input/Output Impedance
47
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFULB455KE1Y-B0
CFULB455KE1Y-B0
±
1±
2±
3±
4±
5±
6±
7±
8±
9±
1±±
±
1±
2±
3±
4±
5±
6±
7±
8±
2±±
15±
1±±
5±
9±
1±±
2±±
±
3±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
43±
455
48±
Frequency (kHz)
Frequency (kHz)
15
48
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Filters (CERAFILr) for Communications Equipment
CERAFIL Plastic Case Group Delay Flat Type CFWLB_Y Series
r
9.5±±.3
Ceramic filter CFWLB_Y series are miniature and
MARKING
high-performance filters. These filters, only
EIAJ
CODE
6.3mm high, are 67% the volume of conventional types.
Well suited for miniaturizing communications
equipment, especially for a cellular phone.
±.7±±.1
±.15±±.±5
2.5±±.3
Features
1. Miniature, flat GDT characteristics
2. Suitable for a cellular phone
3. A variety of bandwidths are available.
4. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
c
±.5±±.1
Connection
2.7±±.3 2.8±±.3
±.9±±.3
(1): Input
(2): Output
(3)
(2)
(1)
(3)
(4)
(5)
(4) : Ground
}
(5)
±.7±±.3
(in mm)
Center
6dB
Stop
Bandwidth
(kHz)
Stop Band
Attenuation
(dB)
Input/Output
Impedance
(ohm)
Insertion Loss
(dB)
GDT Deviation
(µs)
Part Number
Frequency (fo) Bandwidth
(kHz)
(kHz)
455
1.5kꢀz
fn 15.0
min.
fn 30.0 maꢁ.
40 min.
6.0 maꢁ.
30.0 maꢁ.
CFWLB455KB4Y-B0
CFWLB455KC4Y-B0
CFWLB455KD1Y-B0
CFWLB455KE1Y-B0
CFWLB455KF1Y-B0
CFWLB455KG1Y-B0
1500
1500
1500
1500
2000
2000
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 10kꢀz]
455
1.5kꢀz
fn 12.5
min.
fn 27.5 maꢁ. 40 min. 7.0 maꢁ. 30.0 maꢁ.
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 8kꢀz]
fn 25.0 maꢁ. 40 min. 8.0 maꢁ. 30.0 maꢁ.
455
1.0kꢀz
fn 10.0
min.
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 7kꢀz]
455
1.0kꢀz
fn 7.5
min.
fn 20.0 maꢁ. 40 min. 9.0 maꢁ. 30.0 maꢁ.
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 5kꢀz]
fn 17.5 maꢁ. 35 min. 10.0 maꢁ. 40.0 maꢁ.
455
1.0kꢀz
fn 6.0
min.
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 4kꢀz]
455
1.0kꢀz
fn 4.5
min.
fn 15.0 maꢁ. 40 min. 11.0 maꢁ. 40.0 maꢁ.
[within 50dB] [within fn 100kꢀz] [at minimum loss point] [within fn 3kꢀz]
Center frequency (fo) defined by the center of 6dB bandwidth.
(fn) means nominal center frequency 455kꢀz.
CFWLB455K_Y series filters are 4-element ceramic filters and miniature versions of CFWLA455K_Y series.
For safety purposes, connect the output of filters to the IF amplifier through a DC blocking capacitor. Avoid applying a direct current to the output of ceramic filters.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
Test Circuit
c
R1
(1)
(2)
(3) (4) (5)
Rg
RF Voltmeter
Connection
E1
R2
E2
S.S.G.
±dBm
16
(1): Input
(2): Output
(3)(4)(5): Ground
Rg+R1=R2=Input/Output Impedance
49
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Frequency Characteristics
c
CFWLB455KE1Y-B0
CFWLB455KE1Y-B0
±
1±
2±
3±
4±
5±
6±
7±
8±
9±
1±±
2±±
15±
1±±
5±
±
1±
2±
3±
4±
5±
6±
7±
8±
9±
1±±
2±±
±
43±
455
48±
3±±
4±±
5±±
6±±
7±±
8±±
9±±
1±±±
Frequency (kHz)
Frequency (kHz)
16
50
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Plastic Case Type CERAFIL Minimum Quantity/Notice
r
Minimum Quantity
c
Part Number
Bulk
200
250
150
150
CFULA Series
CFULB Series
CFWLA Series
CFWLB Series
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
Notice
c
o Soldering and Mounting
The component cannot withstand washing.
o Storage and Operating Conditions
1. Product Storage Condition
(2) Please do not put the products directly on the floor
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
without anything under them to avoid damp places
and/or dusty places.
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
Humidity: 15 to 85% R.H.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Do not use this product with bend. The component may
be damaged if excessive mechanical stress is applied to
it mounted on the printed circuit board.
2. All kinds of reflow soldering must not be applied on the
component.
5. Conformal coating of the component is not acceptable
due to non-sealed construction.
6. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
3. Do not clean or wash the component as it is not
hermetically sealed.
7. For safety purposes, connect the output of filters to the IF
amplifier through a D.C. blocking capacitor. Avoid
applying a direct current to the output of ceramic filters.
4. Do not use strong acidity flux, more than 0.2wt% chlorine
content, in flow soldering.
51
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators for Communications Equipment
kHz Type Ceramic Discriminators
6.±±±.ꢁ
Ceramic discriminator consists of a wide band
piezoelectric resonator.
MARKING
It is ideal for mobile communications equipment due to
its small size and light weight.
EIAJ
CODE
1.±±±.1
Standard line includes products for a wide range of
applications, from cordless telecom to cellular
telephone. Practically adjustment free at the detection
circuit, small size is suitable for downsizing.
ꢀ.7±±.ꢁ
1.15±±.ꢁ
CDBKB Series
Features
c
1. Small in size and light weight
(in mm)
2. Adjustment free at detection circuit
3. High sensitivity and stability
6.±±±.ꢁ
4. Wide range of standard products are available for
various ICs.
ꢀ.±±±.ꢀ
5. Operating temperature range: -20 to +80 (°C)
Storage temperature range: -40 to +85 (°C)
MARKING
EIAJ
CODE
±.5±±.1
±.15±±.±5
CDBLB_CAX Series
4.ꢁ±±.ꢁ
(in mm)
±.9±±.ꢁ
6.±±±.ꢁ
ꢀ.±±±.ꢀ
MARKING
EIAJ
CODE
±.5±±.1
±.15±±.±5
CDBLB_CAY Series
4.ꢁ±±.ꢁ
(in mm)
±.9±±.ꢁ
Specified by Impedance Characteristics (Type 1)
Nominal Center
Inclination of
Impedance Curve (1)
Inclination of
Impedance Curve (2)
Capacitance
Part Number
Frequency (fn)
(kHz)
IC
IC Maker
TOSHIBA
TOSHIBA
Type
Lead
Lead
(C)
447.0 1.5kHz
(at |Z|=2.05kohm)
463.0 1.5kHz
(at |Z|=10.0kohm)
CDBLB455KCAX02-B0
CDBLB455KCAX31-B0
455
455
140pF 20ꢀ
TA8104F
TA31141
17
447.0 1.5kHz
(at |Z|=2.05kohm)
463.0 1.5kHz
(at |Z|=10.0kohm)
140pF 20ꢀ
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in package page in this catalog.
52
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smo5ing and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,20±±
!Note
P0ꢀE.pdf
Impedance Curve
c
CDBLB455KCAX02-B0
CDBLB455KCAX31-B0
5±±K
5±±K
18±
9±
18±
9±
1±±K
5±K
1±±K
5±K
1±K
5K
1±K
5K
±
±
1K
1K
–9±
–9±
5±±
5±±
1±±
5±
1±±
5±
–18±
–18±
4±±
4ꢁ±
44±
46±
48±
5±±
4±±
4ꢁ±
44±
46±
48±
5±±
Frequency (kHz)
Frequency (kHz)
Specified by Impedance Characteristics (Type 2)
Nominal Center
Frequency (fn)
Anti-resonant
Frequency (Fa)
Delta F
(Fa-Fr)
Resonant
Resistance (R)
Capacitance
(C)
Part Number
IC
IC Maker
Type
CDBKB455KCAX33-R0
CDBLB455KCAY03-B0
CDBLB455KCAX15-B0
CDBLB455KCAX25-B0
CDBLB455KCAX33-B0
-
-
-
-
-
462.0±±.ꢀ5kH
4ꢀꢀ.0±±.ꢀ5kH
463.ꢀ±±.05kH
46ꢀ.0±±.ꢀ5kH
46ꢀ.0±±.ꢀ5kH
40±4.05kH
46±ꢀ.05kH
43±2.05kH
4ꢀ±4.05kH
4ꢀ±4.05kH
200ohm max.
70ohm max.
300ohm max.
300ohm max.
300ohm max.
±ꢀ0pF±20ꢁ
ꢀꢀ0pF±20ꢁ
±40pF±20ꢁ
±3ꢀpF±20ꢁ
±3ꢀpF±20ꢁ
CXA±474
CXA±±84M
CXA±±83M
CXA±484
CXA±474
SONY
SONY
SONY
SONY
SONY
SMD
Lead
Lead
Lead
Lead
For safety purposes, avoid applying a direct current between the terminals.
The order quantity should be an integral multiple of the "Minimum Quantity" shown in pac5age page in this catalog.
Impedance Curve
c
CDBKB455KCAX33-R0
CDBLB455KCAY03-B0
500K
180
90
0
100K
50K
180
90
100K
50K
10K
5K
10K
5K
1K
0
500
1K
–90
500
–90
100
50
100
50
–180
480
–180
500
10
380
400
420
440
460
400
420
440
460
480
Frequency (kHz)
Frequency (kHz)
±7
Continued on the following page.
ꢀ3
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Impedance Curve
c
CDBLB455KCAX15-B0
CDBLB455KCAX25-B0
500K
500K
180
90
0
180
90
100K
50K
100K
50K
10K
5K
10K
5K
0
1K
1K
–90
500
500
–90
100
50
100
50
–180
–180
500
390
410
430
450
470
490
400
420
440
460
480
Frequency (kHz)
Frequency (kHz)
CDBLB455KCAX33-B0
500K
180
90
0
100K
50K
10K
5K
1K
500
–90
100
50
–180
500
400
420
440
460
480
Frequency (kHz)
17
54
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Specified by Recovered Audio Characteristics
Nominal Center Recovered
Recovered Distortion
Distortion
(%)
Part Number
Frequency (fn) Audio 3dB BW Audio Output
(at fn)
(%)
IC
TB±2±02FG
MC±±57
IC Maker
Type
(kHz)
(kHz)
(mV)
CDBKB450KCAY79-R0
CDBKB455KCAY07-R0
CDBKB455KCAY09-R0
CDBKB455KCAY13-R0
CDBKB455KCAY16-R0
CDBKB455KCAY24-R0
CDBKB455KCAY27-R0
CDBKB455KCAY28-R0
CDBKB455KCAY29-R0
CDBKB455KCAY35-R0
CDBKB455KCAY40-R0
CDBKB455KCAY49-R0
CDBKB455KCAY50-R0
CDBKB455KCAY66-R0
CDBKB455KCLX36-R0
CDBKB455KCLX39-R0
CDBKB455KCLY13-R0
CDBLB455KCAY07-B0
CDBLB455KCAY13A-B0
CDBLB455KCAY24-B0
CDBLB455KCAY28-B0
CDBLB455KCAY34-B0
CDBLB455KCAY40-B0
CDBLB455KCAY42-B0
CDBLB455KCAY49-B0
CDBLB455KCAY50-B0
CDBLB455KCLY09-B0
450
fn±±.0 min.
145 ±40
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
TOSHIBA
SMD
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
455
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.2 min.
fn±1±.0 min.
fn±11.0 min.
fn±1±.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±4.0 min.
fn±15.0 min.
±50 ±ꢀ0
120 ±40
±±0 ±50
175 ±40
100 ±40
90 ±±0
40 ±20
100 ±±0
100 ±40
40 ±20
45 ±10
ꢀ4 ±ꢀ.4
40 ±10
90 ±±0
1±0 ±20
120 ±±0
±40 ±ꢀ0
±50 ±50
100 ±40
40 ±20
ꢀ5 ±20
40 ±20
40 ±15
45 ±10
ꢀ4 ±ꢀ.4
70 ±20
±.0 max.
1.5 max.
4.0 max.
2.0 max.
2.0 max.
2.0 max.
±.0 max.
2.5 max.
2.5 max.
±.5 max.
±.0 max.
4.0 max.
4.0 max.
2.5 max.
2.5 max.
1.5 max.
±.0 max.
±.0 max.
2.0 max.
±.0 max.
2.5 max.
±.0 max.
±.0 max.
±.0 max.
4.0 max.
1.5 max.
MOTOROLA SMD
NEꢀ04N
PHILIPS
SONY
SMD
SMD
CXA100±BM
MC±±72
MOTOROLA SMD
TA±11±ꢀ
TOSHIBA
TOKO
SMD
SMD
SMD
SMD
SMD
SMD
TK10487
TA±1142F
NEꢀ05
TOSHIBA
PHILIPS
TOKO
TK109±0
TA±1145
TOSHIBA
MC±±ꢀ1
MOTOROLA SMD
CXA±117N
NJM2590
SONY
JRC
SMD
SMD
SMD
SMD
SMD
5.0 max.
[within fn ±ꢀkHꢁz
NE(SA)ꢀ0ꢀ/NE(SA)ꢀ1ꢀ
NEꢀ07/NEꢀ17
CXA100±BM
MC±±57
PHILIPS
PHILIPS
SONY
7.0 max.
[within fn ±8kHꢁz
5.0 max.
[within fn ±8kHꢁz
-
-
-
-
-
-
-
-
-
MOTOROLA Lead
CXA100±BM
TA±11±ꢀ
SONY
Lead
Lead
Lead
TOSHIBA
TOSHIBA
TA±1142FN
MC1±1±ꢀ
MOTOROLA Lead
TA±1145
TOSHIBA
TOKO
Lead
Lead
TK14590/TK14591
MC±±ꢀ1
17
MOTOROLA Lead
CXA±117N
NEꢀ04N
SONY
Lead
Lead
±.5 max.
[within fn ±8kHꢁz
PHILIPS
Continued on the following page.
55
•0Please0read0ratmng0and0!CAUTION0(for0storage,0operatmng,0ratmng,0soldermng,0 ountmng0and0handlmng)0mn0thms0catalog0to0prevent0s o8mng0and/or0burnmng,0etcꢀ
•0Thms0catalog0has0only0typmcal0specmfi0catmons0because0there0ms0no0space0for0detamled0specmfi0catmonsꢀ0Therefore,0please0revmew0our0product0specmfi0catmons0or0consult0the0approval0sheet0for0product0specmfi0catmons0before0ordermngꢀ Novꢀ24,2.±±
!Note
P.5Eꢀpdf
Continued from the preceding page.
Nominal Center Recovered
Recovered Distortion
Distortion
(%)
Part Number
Frequency (fn) Audio 3dB BW Audio Output
(at fn)
(%)
IC
IC Maker
Type
(kHz)
(kHz)
(mV)
5ꢀ.0 axꢀ
[wmthmn0fn0±ꢂ8kHz
CDBLB455KCLY13-B0
CDBLB455KCAX16-B0
CDBLB455KCAX18-B0
CDBLB455KCAX36-B0
455
fn±±5ꢀ.0 mnꢀ
±±.0±ꢁ.
±ꢀ50 axꢀ
2ꢀ.0 axꢀ
2ꢀ.0 axꢀ
ꢁꢀ50 axꢀ
CXA±..ꢁBM
MCꢁꢁ72
SONY
Lead
455
455
455
fn±4ꢀ.0 mnꢀ
fn±ꢁꢀ.0 mnꢀ
fn±ꢁꢀ50 mnꢀ
±ꢂ50±4.
±ꢂ.0±4.
±..0±25
-
-
-
MOTOROLA Lead
MOTOROLA Lead
MCꢁꢁ7±
NE6.6/NE6±6
PkILIPS
Lead
For0safety0purposes,0avomd0applymng0a0dmrect0current0between0the0ter mnalsꢀ
The0order0quantmty0should0be0an0mntegral0 ultmple0of0the0"Mmnm u 0Quantmty"0shown0mn0pac8age0page0mn0thms0catalogꢀ
Test Circuit
c
MC3357
NE604N
IF input
8.2k AF output
0.01μ
10k
16 15 14 13 12 11 10
MC3357
0.1μ
9
8
0.1μ
16
1
15
2
14
3
13
12
11
6
10
9
8
1
2
3
4
5
6
7
NE604
C
0.1μ
50
0.1μ
0.022μ
C
X
4
5
7
47k
Vcc
R
FM S. S. G.
(Rg = 50Ω)
X
+
10μ
Vcc
Unit C: F
100p
1000p
R
R: Ω
L
+
47μ
0.01μ
Part Number (X)
C
R
Part Number (X)
CDBKB455KCAY09-R0 120pF 1.8kΩ
CDBLB455KCLY09-B0 120pF 560Ω 220μH
C
R
L
–
CDBLB455KCAY07-B0
CDBKB455KCAY07-R0
150pF
150pF
1.5kΩ
1.3kΩ
AF output
Unit C: F
R: Ω
CXA1003BM
MC3372
IF input
L
0.01μ
0.1μ
51
510k
8.2k
0.01μ
X
R
0.01μ
51k
AF output
0.01μ
23
0.01μ
21
0.01μ
19
0.01μ
0.01μ
C
16
15
14
13
12
11
10
9
8
24
1
22
3
20
5
18
17
16
15
14
13
12
MC3372
CXA1003BM
1
2
3
4
5
6
7
2
4
6
7
8
9
10
11
0.1μ 51k
C
Vcc
0.01μ
68p
Unit C: F
1.8k
0.1μ
220p
51k
X
R
0.01μ
R: Ω
100μ 100μ
Vcc
0.01μ
(Rg = 50Ω)
FM S. S. G
AF output
Part Number (X)
C
R
L
–
–
Part Number (X)
CDBLB455KCAX16-B0
C
R
CDBLB455KCAY13A-B0 82pF 1.2kΩ
CDBKB455KCAY13-R0 82pF 1.0kΩ
CDBLB455KCLY13-B0
27pF
4.3kΩ
1.0kΩ
Unit C: F
CDBKB455KCAY16-R0 100pF
82pF 560Ω 220μH
CDBKB455KCLY13-R0
R: Ω
MC3371
TA31136
RF input
+
10μ
X
C
R
+
0.1μ
1μ
AF output
0.01μ
51
510k
8.2k
51k
0.01μ
16
AF output
0.01μ
16 15 14 13 12 11 10
TA31136F
9
15
2
14
3
13
12
11
10
7
9
Vcc
(+2.0V)
MC3371
1
2
3
4
5
6
7
8
Test condition
Vcc = +4.0V
R = 6.2kΩ
1
4
5
6
8
+
10μ
X: CDBLB455KCAX18-B0
Unit C: F
Vcc
68p
R: Ω
220p
X
R
±7
0.1μ
IF input
Part Number (X)
C
R
0.01μ
CDBLB455KCAY24-B0 91pF 1.5kΩ
CDBKB455KCAY24-R0 91pF 1.2kΩ
IF input
Unit C: F
R: Ω
Continued on the following page.
56
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Test Circuit
c
TK10487
TA31142
Vcc
2SC1048
2.2μ
8.2k
+
430
560p
68k 68k
3300p
20 19 18 17 16 15 14 13 12 11
TK10487
0.01μ
20 19 18 17 16 15 14 13 12 11
TA31142F
68k
1
2
3
4
5
6
7
8
9
10
AF
output
Vcc
1
2
3
4
5
6
7
8
9
10
C
+
+
10μ
0.01μ
X
R
0.1μ
Unit C: F
0.01μ
C
X
Vcc
R: Ω
R
Unit C: F
2k
0.01μ
Vcc
R: Ω
+
10μ
+
Part Number (X)
C
R
10μ
Part Number (X)
C
R
IF input
CDBKB455KCAY27-R0 33pF
1.0kΩ
CDBLB455KCAY28-B0
22pF
3.3kΩ
2.7kΩ
CDBKB455KCAY28-R0 22pF
NE605
MC13136
IF input
0.01μ
AF input
0.1μ
0.1μ
X
R
0.15μ
C
1k
20 19 18 17 16 15 14 13 12 11
24 23 22 21 20 19 18 17 16 15 14 13
MC13136
NE605
C
Vcc
1
2
3
4
5
6
7
8
9
10
1
2
3
4
5
6
7
8
9
10 11 12
0.1μ
Vcc
22k
X
+
0.1μ
R
22μ
0.1μ
+
0.1μ
0.01μ
0.1μ
Part Number (X)
CDBKB455KCAY29-R0
C
R
IF input
Unit C: F
R: Ω
Part Number (X)
CDBLB455KCAY34-B0
C
R
AF output
56pF
2.2kΩ
Unit C: F
100pF
1.2kΩ
R: Ω
TK10930
NE(SA)606/616
IF input
0.01μ
0.1μ
0.1μ
24 23 22 21 20 19 18 17 16 15 14 13
TK10930
AF
output
20 19 18 17 16 15 14 13 12 11
NE606 or NE616
1
2
3
4
5
6
7
8
9
10 11 12
C
X
C
Vcc
8.2k
0.01μ
R2
Vcc
1
2
3
4
5
6
7
8
9
10
R1
+
20k
10μ
+
0.1μ
0.1μ
X
L
+
8.2k
0.1μ
2.2μ
0.1μ
R
Unit C: F
2.2μ
IF input
R: Ω
2k
0.1μ
Part Number (X)
CDBKB455KCAY35-R0
C
R1
R2
Part Number (X)
C
R
L
–
33pF
2.0kΩ
1.0kΩ
CDBLB455KCAX36-B0
CDBKB455KCLX36-R0
22pF
27pF
4.7kΩ
2.2kΩ
AF output
Unit C: F
1mH
R: Ω
NE(SA)607/617
TA31145
Vcc
IF input
51
0.1μ 0.1μ
20 19 18 17 16 15 14 13 12 11
NE607/617 (PHILIPS)
+
2.2μ
3300p
68k
430
C
0.01μ
20 19 18 17 16 15 14 13 12 11
TA31145 (TOSHIBA)
1
2
3
4
5
6
7
8
9
10
22k
1
2
3
+
4
5
6
7
8
9
10
Vcc
1.5k
0.01μ
+10μ
8.2k
0.1μ
X
+
10μ
R
L
X
Unit C: F
17
R
R: Ω
+
0.1μ
AF output
Part Number (X)
R
IF input
CDBLB455KCAY40-B0
CDBKB455KCAY40-R0
3.3kΩ
2.7kΩ
Unit C: F
R: Ω
AF output
Part Number (X)
CDBKB455KCLX39-R0
C
R
2.7kΩ
L
22pF
1mH
L: H
Continued on the following page.
57
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Test Circuit
c
TK14590/14591
MC3361
Vcc
(1.3V)
AF output
100p
0.1μ
0.1μ 1000p
1μ
1k
0.15μ
100k
24 23 22 21 20 19 18 17 16 15 14 13
150k
16 15 14 13 12 11 10
9
8
TK14590V (TOKO)
0.01μ
8.2k
AF
output
MC3361
1
2
3
4
5
6
7
8
9 10 11 12
C
1
2
3
4
5
6
7
0.1μ
0.01μ
Unit C: F
Vcc
47μ
R
X
Unit C: F
0.1μ 0.1μ
100k 560p
22
0.01μ 1μ
X
R
R: Ω
R: Ω
0.1μ
Part Number (X)
R
0.022μ
IF input
CDBLB455KCAY49-B0
CDBKB455KCAY49-R0
1.8kΩ
1.5kΩ
Part Number (X)
C
R
IF input
CDBLB455KCAY42-B0
22pF 3.3kΩ
CXA3117
NJM2590
Vcc
+
100k
100k
AF out
24 23 22 21 20 19 18 17 16 15 14 13
CXA3117(SONY)
10μ
14 13 12
11 10
9
8
NJM2590(JRC)
1
2
3
4
5
6
7
8
9
10 11 12
Vcc
1
2
3
4
5
6
7
1200p
1200p
0.1μ
0.1μ
51
10k
Unit C: F
R: Ω
X
R
R
X
S.G.
Part Number (X)
R
33μ
0.01μ
CDBLB455KCAY50-B0
CDBKB455KCAY50-R0
8.2kΩ
6.2kΩ
+
10μ
Unit C: F
R: Ω
0.01μ
Part Number (X)
R
CDBKB455KCAY66-R0
3.0kΩ
AF output
Recovered Audio Curve
c
CDBKB455KCAY07-R0
CDBLB455KCAY07-B0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
Continued on the following page.
17
58
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Recovered Audio Curve
c
CDBKB455KCAY09-R0
CDBLB455KCLY09-B0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
395
435
475
515
Frequency (kHz)
Frequency (kHz)
CDBKB455KCAY13-R0
CDBKB455KCLY13-R0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
425
445
465
485
Frequency (kHz)
Frequency (kHz)
CDBLB455KCAY13A-B0
CDBLB455KCLY13-B0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
17
1
0.1
1
0.1
440
450
460
470
395
435
475
515
Frequency (kHz)
Frequency (kHz)
Continued on the following page.
59
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Recovered Audio Curve
c
CDBKB455KCAY16-R0
CDBLB455KCAX16-B0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
CDBLB455KCAX18-B0
CDBKB455KCAY24-R0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
CDBLB455KCAY24-B0
CDBKB455KCAY27-R0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
17
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
Continued on the following page.
60
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Recovered Audio Curve
c
CDBKB455KCAY28-R0
CDBLB455KCAY28-B0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
CDBKB455KCAY29-R0
CDBLB455KCAY34-B0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
CDBKB455KCAY35-R0
CDBKB455KCLX36-R0
500
50.0
50
500
10
5
100
50
100
50
10.0
5.0
1
10
5
10
5
1.0
0.5
0.5
17
1
0.1
1
0.1
425
445
465
486
440
450
460
470
Frequency (kHz)
Frequency (kHz)
Continued on the following page.
61
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Recovered Audio Curve
c
CDBLB455KCAX36-B0
CDBKB455KCLX39-R0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
425
445
465
485
440
450
460
470
Frequency (kHz)
Frequency (kHz)
CDBKB455KCAY40-R0
CDBLB455KCAY40-B0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
CDBLB455KCAY42-B0
CDBKB455KCAY49-R0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
17
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
Continued on the following page.
62
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.±4,±211
!Note
P25E.pdf
Continued from the preceding page.
Recovered Audio Curve
c
CDBLB455KCAY49-B0
CDBKB455KCAY50-R0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
CDBLB455KCAY50-B0
CDBKB455KCAY66-R0
500
50.0
500
50.0
100
50
10.0
5.0
100
50
10.0
5.0
10
5
1.0
0.5
10
5
1.0
0.5
1
0.1
1
0.1
440
450
460
470
440
450
460
470
Frequency (kHz)
Frequency (kHz)
Specified by S Curve Characteristics
Nominal Center
Frequency (fn)
(kHz)
S Curve (1)
Output Volt. at fn
(mV)
S Curve (2)
at fn 4.8kHz
(mV)
Part Number
IC
IC Maker
Type
CDBKB455KCAY54-R0
455
165 ±±2
172 ±±2
TA31149
TOSHIBA
SMD
17
63
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Test Circuit
S Curve
c
c
TA31149
CDBKB455KCAY54-R0
Vcc (+1.4V)
0.4
0.3
0.2
0.1
0.0
Vcc Vcc Vcc
10μ
+
+
430
24 23 22 21 20 19 18 17 16 15 14 13
TA31149(TOSHIBA)
1
2
3
4
5
6
7
8
9
10 11 12
+
R
X
Unit C: F
R: Ω
0.1μ
IF
input
Part Number (X)
R
CDBKB455KCAY54-R0
2.7kΩ
440
450
460
470
Frequency (kHz)
17
64
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators for Communications Equipment
MHz Type Ceramic Discriminators
CDSCB10M7 series forms a resonator on a piezoelectric
ceramic substrate. In combination with ICs, this type
obtains stable demodulation characteristics in a wide
bandwidth.
4.5 0.1
0.2 0.2
0.4 0.05
They have 1.0mm max. thickness and small mounting area
(4.5x2.0mm).
4.1 max.
0.4(ref.)
0.4(ref.)
0.8 0.1
0.8 0.1
Features
c
1. Compact and high reliability and recommended for
CDSCB Series
automotive applications.
2. Can be combined with various ICs. The IC is
determined by the last number in the part number.
3. Stable demodulation characteristics can be
obtained without adjustment.
1.5 0.1 1.5 0.1
(in mm)
4. Stable temperature characteristics
5. Available lead (Pb) free solder reflow.
Center
Frequency (fo)
(MHz)
Recovered
Audio 3dB BW
(kHz)
Recovered
Audio Output
(mV)
Distortion
(%)
S Curve
(mV)
Part Number
IC
CDSCB10M7GA105A-R0
CDSCB10M7GA113-R0
CDSCB10M7GA119-R0
CDSCB10M7GA121-R0
CDSCB10M7GA135-R0
CDSCB10M7GA136-R0
CDSCB10M7GF072-R0
CDSCB10M7GF107S-R0
CDSCB10M7GF109-R0
CDSCB10M7GF123-R0
CDSCB10M7GF123S-R0
CDSCB10M7GF126-R0
(fn) means nominal center frequency.
10.700 30kꢀz
10.700 30kꢀz
10.700 30kꢀz
10.700 30kꢀz
10.700 30kꢀz
10.700 30kꢀz
10.700 (fn)
220 min.
300 min.
500 min.
390 min.
155 min.
140 min.
fn 150 min.
fn 80 min.
fn 100 min.
-
110 min.
110 min.
75 min.
80 min.
75 min.
120 min.
130 min.
52 min.
170 min.
-
1.5 max.
-
TEA5757ꢀL
TA2154FN
TRF6901
1.0 max.
-
1.0 max.
-
1.0 max.
-
LV23100V
Tꢀ71101
-
-
-
-
Tꢀ7122
2.0 max.
-
TA31161
10.700 (fn)
3.0 max.
-
TA31272FN
TK14588V
TA31275FN
TA31275FN
NJM2295AV
10.700 (fn)
3.0 max.
-
10.700 (fn)
-
-
-
900 min.
900 min.
400 min.
10.700 (fn)
-
-
10.700 (fn)
-
-
The order quantity should be an integral multiple of the "Minimum Quantity" shown in the package page.
For safety purposes, avoid applying a direct current between the terminals.
18
65
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Test Circuit
c
CDSCB10M7GA105A-R0
CDSCB10M7GA113-R0
Vcc (1.2V)
Vcc (3.0V)
0.1μ
10μ
+
48 47 46 45 44 43 42 41 40 39 38 37
0.1μ
1
2
36
35
34
33
32
31
30
29
28
27
26
25
+
100μ
30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TA2154FN (TOSHIBA)
S.S.G.
3
1
2
3
4
5
6
7
8
9
10 11 12 13 14 15
4
+
5
X
2.2μ
6
TEA5757HL
(PHILIPS)
7
D.C. OUT
AF OUT
8
9
100k
X: CDSCB10M7GA113-R0
S.S.G.
10
11
12
Unit C: F
R: Ω
10
DC OUT
330p
13 14 15 16 17 18 19 20 21 22 23 24
+
4.7μ
X
0.22μ
X: CDSCB10M7GA105A-R0
150
Unit C: F
AF OUT
R: Ω
CDSCB10M7GA119-R0
CDSCB10M7GA121-R0
Vcc (3.0V)
0.01μ
AF Output
D.C. Output
Vcc (3.2V)
IF Input
AF Output
220k
68p
0.01μ
0.01μ
0.015μ
15p
10
22μ+
120p
4.7μ
82p
36 35 34 33 32 31 30 29 28 27 26 25 24 23 22 21 20 19
LV23100V (SANYO)
1
2
3
4
5
6
7
8
9 10 11 12 13 14 15 16 17 18
48 47 46 45 44 43 42 41 40 39 38 37
0.01μ
0.01μ
1
2
3
4
5
6
7
8
9
36
35
34
X
10k
+
10μ
0.047μ
1000p
+
33
32
31
30
29
28
27
26
25
47p
TRF6901
(TEXAS INSTRUMENTS)
+
0.47μ
0.01μ
100p 10
11
12
3.3k
13 14 15 16 17 18 19 20 21 22 23 24
+
0.1μ
0.01μ
1μ
0.22μ
+
0.47μ
+
S.G.
10k
100p
10k
18 17 16 15 14 13 12 11 10
PIC16F84 (Control IC)
18 17 16 15 14 13 12 11 10
PIC16F84
1
2
3
4
5
6
7
8
9
1
2
3
4
5
6
7
8
9
X: CDSCB10M7GA119-R0
1k
2.2μ
1k
10k
Unit C: F
R: Ω
10k
+
+
Unit C: F
0.1μ
2.2μ
0.1μ
X: CDSCB10M7GA121-R0
L: H
R: Ω
CDSCB10M7GA135-R0
CDSCB10M7GA136-R0
Vcc (5.0V)
0.1μ
Vcc (5.0V)
AF-OUT
FKS-OUT
330p
0.1μ
24 23 22 21 20 19 18 17
25
26
27
28
29
30
31
32
16
15
14
13
12
11
10
9
0.01μ
0.01μ
100p 1000p 0.01μ
330k
TH7122
[Internal AFC Enabled]
(MELEXIS)
330p
220k
24 23 22 21 20 19 18 17
0.01μ
25
26
27
28
29
30
31
32
16
15
14
13
12
11
10
9
1
2
3
4
5
6
7
8
FKS-OUT
12p
C.D.
0.01μ
0.1μ
330p
0.01μ
AF-OUT
1000p
1000p
TH71101, TH71102,
TH71111 or TH71112
(MELEXIS)
330p
100k
0.033μ
0.01μ
S.G.
0.01μ
0.01μ
C.D.
3.3k
330p
330p
100k
100p
1
2
3
4
5
6
7
8
18 17 16 15 14 13 12 11 10
0.01μ
PIC16F84 (Control IC)
S.G.
1
2
3
4
5
6
7
8
9
18
1k
10k
X: CDSCB10M7GA135-R0
X: CDSCB10M7GA136-R0
Unit C: F
0.1μ
+
+
10μ
330p
Unit C: F
2.2μ
R: Ω
R: Ω
Continued on the following page.
66
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Test Circuit
c
CDSCB10M7GF072-R0
CDSCB10M7GF107S-R0
Vcc (5.0V)
AF Output
Vcc (3V)
0.01μ
+
4.7μ
24 23 22 21 20 19 18 17 16 15 14 13
TA31272FN (TOSHIBA)
R
X
0.01μ
AF OUT
10p
1
2
3
4
5
6
7
8
9
10 11 12
16 15 14 13 12 11 10
TA31161 (TOSHIBA)
9
8
C.D.
1
2
3
4
5
6
7
0.01μ
0.01μ
X: CDSCB10M7GF072-R0
S.S.G.
C.D.: Ceramic Discriminator
+
R: 820
Unit C: F
R: Ω
Unit R: Ω
C: F
33μ
0.01μ
IF IN
L: H
L: H
CDSCB10M7GF109-R0
CDSCB10M7GF123-R0
Vcc (5.0V)
AF OUT
DC-OUT
Vcc (3V)
R
24 23 22 21 20 19 18 17 16 15 14 13
TA31275FN (TOSHIBA)
X
0.01μ
D.C. OUT
AF OUT
1
2
3
4
5
6
7
8
9
10 11 12
0.01μ
1000p
51k
8p
12k
16 15 14 13 12 11 10
TK14588V (TOKO)
9
8
X: CDSCB10M7GF123-R0
S.S.G.
1
2
3
4
5
6
7
Unit C: F
R: Ω
+
S.S.G.
X: CDSCB10M7GF109-R0
R: 820
Unit C: F
R: Ω
L: H
CDSCB10M7GF126-R0
Vcc (5.0V)
DC-OUT
+
20 19 18 17 16 15 14 13 12 11
NJM2295AV (JRC)
1
2
3
4
5
6
7
8
9
10
+
8p
C.D.
180
+
+
X: CDSCB10M7GF126-R0
S.G.
Unit C: F
R: Ω
18
67
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Recovered Audio Curve
c
CDSCB10M7GA105A-R0
CDSCB10M7GA113-R0
1000
100
10
100
10
1
1000
100
10
100
10
1
AF Output
Distortion
AF Output
Distortion
1
0.1
1
0.1
Input = 100dBμ
fdev. = ±±75Hz
fmod. = 15Hz
Vcc = 3.0V
Input = 100dBμ
fdev. = ±±75Hz
fmod. = 15Hz
Vcc = 1.2V
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1
Frequency (MHz)
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1
Frequency (MHz)
CDSCB10M7GA119-R0
CDSCB10M7GA121-R0
1000
100
1000
100
AF Output
AF Output
100
10
1
10
100
10
1
10
Distortion
Distortion
1
1
0.1
0.1
Input = 100dBμ
fdev. = ±605Hz
fmod. = 15Hz
Vcc = 3.0V
Input = 100dBμ
fdev. = ±±75Hz
fmod. = 15Hz
Vcc = 3.2V
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1
Frequency (MHz)
10.3 10.4 10.7 10.6 10.± 10.8 10.9 11.0 11.1
Frequency (MHz)
CDSCB10M7GA135-R0
CDSCB10M7GA136-R0
1000
100
10
1000
100
10
1
1
Input = 100dBμ
fdev. = ±705Hz
fmod. = 15Hz
Vcc = 7.0V
Input = 100dBμ
fdev. = ±705Hz
fmod. = 15Hz
Vcc = 7.0V
0.1
10.4
0.1
10.4
18
10.7
10.6
10.±
10.8
10.9
11.0
10.7
10.6
10.±
10.8
10.9
11.0
Frequency (MHz)
Frequency (MHz)
Continued on the following page.
68
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Continued from the preceding page.
Recovered Audio Curve
c
CDSCB10M7GF072-R0
CDSCB10M7GF109-R0
1000
100
1000
100
10
100
10
1
100
10
10
1
1
0.1
1
0.1
Input = 100dBμ
fdev. 80ꢀHz
Input = 100dBμ
fdev. 64ꢀHz
=
=
fmod. = 1ꢀHz
Vcc = 3.0V
fmod. = 1ꢀHz
Vcc = 3.0V
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
Frequency (MHz)
Frequency (MHz)
S Curve
c
CDSCB10M7GF123-R0
CDSCB10M7GF126-R0
2.5
2.0
1.5
1.0
4.0
3.0
2.0
0.5
0.0
1.0
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
10.3 10.4 10.5 10.6 10.7 10.8 10.9 11.0 11.1
Frequency (MHz)
Frequency (MHz)
18
69
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators Notice
CDBKB Series Notice (Soldering and Mounting)
c
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
conditions.
Peak
(260°C max.)
260
230
Heating
(230°C)
Pre-heating
(150-180°C)
100
Gradual
Cooling
30 sec.
min.
60-120 sec.
40 sec.
max.
120 sec.
min.
(2) Soldering Iron
Electrode is directly soldered with the tip of soldering iron
at +350 5°C for 3.0 0.5 seconds.
2. Wash
(1) Cleaning Solvent
CFC alternatives (HCFC Series), Isopropyl Alcohol (IPA),
Water (Demineralized Water), Cleaning Water Solution
(Cleanthrough-750H, Pine Alpha 100S), Silicon
(Technocare FRW)
(2) Cleaning Conditions
o Immersion Wash
2 minutes max. in above solvent at +60°C max.
o Shower or Rinse Wash
2 minutes max. in above solvent at +60°C max.
(3) Notice
o When components are immersed in solvent, be sure to
maintain the temperature of components below the
temperature of solvent.
o Please do not use ultrasonic cleaning.
o Total washing time should be within 4 minutes.
o Please ensure the component is thoroughly evaluated
in your application circuit.
o Please do not use chlorine, petroleum or alkaline
cleaning solvents.
o If you plan to use any other type of solvents, please
consult with Murata or Murata representative prior to
using.
CDBKB Series Notice (Handling)
c
1. The component will be damaged when an excessive
5. The product, packed in a moisture-proof bag (dry
pack), is sensitive to moisture.
stress is applied.
2. If the component is cleaned, please confirm
that the reliability has not been degraded.
3. In case of covering filter with over coating,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
The following treatment is required before
applying reflow soldering, to avoid package
cracks or reliability degradation caused by
thermal stress. When unpacked, store the component
in an atmosphere of below 25 degrees C. and below
65%R.H., and solder within 48 hours.
4. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in reflow soldering.
Continued on the following page.
70
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators Notice
Continued from the preceding page.
CDBLB Series Notice (Handling)
c
1. Do not use this product with bend. The component
may be damaged if excess mechanical stress is
applied to it mounted on the printed circuit board.
2. The component will be damaged when an excessive
stress is applied.
5. Do not use strong acidity flux, more than 0.2wt%
chlorine content, in flow soldering.
6. In case of covering discriminator with over coating,
conditions such as material of resin, cure
temperature, and so on should be evaluated
carefully.
3. No type of reflow soldering should be applied to this
component.
4. Do not clean or wash the component as it is not
hermetically sealed.
71
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators Notice
CDSCB Series Notice
c
o Soldering and Mounting
1. Standard Reflow Soldering Conditions
(1) Reflow
Filter is soldered twice within the following temperature
Peak
(2605C max.)
conditions.
260
230
Heating
(2305C)
Pre-heating
(1±0-1805C)
100
Gradual
Cooling
30 sec.
min.
40 sec.
max.
120 sec.
min.
60-120 sec.
(2) Soldering Iron
Filter is soldered at +300±±5C for 3.0±0.± seconds. ꢀhe
soldering iron should not touch the filter while soldering.
(3) Condition for Placement Machines
ꢀhe component is recommended with placement
machines that employ optical placement capabilities. ꢀhe
component might be damaged by excessive mechanical
force. Please make sure that you have evaluated by
using placement machines before going into mass
production. Do not use placement machines that utilize
mechanical positioning. Please contact Murata for details
beforehand.
(4) Other
(a) ꢀhe component may be damaged if excess
[Component Direction]
mechanical stress is applied to it mounted on the
printed circuit board.
Place the
component
laterally to the
direction in
which stress
acts.
(b) Design layout of components on the PC board to
minimize the stress imposed on the warp or flexure of
the board.
[Component Layout Close to Board]
(c) After installing components, if solder is excessively
applied to the circuit board, mechanical stress will
cause destruction resistance characteristics to
degrade. ꢀo prevent this, be extremely careful in
determining shape and dimension before designing
the circuit board diagram.
Perforation
B
Susceptibility to
stress is in the order
of : A>C>B
C
A
Slit
(d) When the positioning claws and pick-up nozzle are
worn, the load is applied to the components while
positioning is concentrated on positioning accuracy,
etc. Careful checking and maintenance are necessary
to prevent unexpected trouble.
(e) When correcting components with a soldering iron,
the tip of the soldering iron should not directly touch
the component. Depending on the soldering
conditions, the effective area of terminations may be
reduced. Solder containing Ag should be used to
prevent the electrode erosion.
Continued on the following page.
72
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators Notice
Continued from the preceding page.
2. Wash
Do not clean or wash the component as it is not
hermetically sealed.
3. Coating
In case of overcoating the component, conditions such as
material of resin, cure temperature, and so on should be
evaluated well.
o Storage and Operating Conditions
1. Product Storage Condition
(2) Please do not put the products directly on the floor
without anything under them to avoid damp places
and/or dusty places.
Please store the products in a room where the
temperature/humidity is stable, and avoid places where
there are large temperature changes. Please store the
products under the following conditions:
Temperature: -10 to +40°C
(3) Please do not store the products in places such as a
damp heated place or any place exposed to direct
sunlight or excessive vibration.
Humidity: 15 to 85% R.H.
(4) Please use the products immediately after the
package is opened, because the characteristics may
be reduced in quality and/or be degraded in
solderability due to storage under poor condition.
(5) Please do not drop the products to avoid cracking of
ceramic element.
2. Expiration Date on Storage
Expiration date (shelf life) of the products is six months
after delivery under the conditions of a sealed and
unopened package. Please use the products within six
months after delivery. If you store the products for a long
time (more than six months), use carefully because
solderability may be degraded due to storage under poor
conditions.
4. Other
Please be sure to consult with our sales representative or
engineer whenever the products are to be used in
conditions not listed above.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics may
be reduced in quality and may be degraded in
solderability due to storage in a chemical atmosphere.
o Rating
The component may be damaged if excessive mechanical
stress is applied.
o Handling
1. Accurate test circuit values are required to measure
electrical characteristics. Miscorrelation may be caused if
there is any deviation, especially stray capacitance, from
the test circuit in the specification.
2. For safety purposes, avoid applying a direct current
between the terminals.
73
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
Standard Land Pattern Dimensions
c
CDBKB Series
CDSCB Series
3.0
1.2
2.6
1.2
1.0
2.0
1.0
(in mm)
(in mm)
Minimum Quantity
c
Part Number
Taping ø180mm
Bulk
CDBKB Series
CDBLB Series
CDSCB Series
500
500
2000
(pcs.)
The order quantity should be an integral multiple of the "Minimum Quantity" shown above.
CDBKB Series
c
Dimensions of Carrier Tape
Dimensions of Reel
Trailer
160 to 190
Leader
Cover film
4.0 0.1
ø1.5
2.0 0.1
+0.1
-0.0
Empty Components
Empty
160 to 200
400 to 560
2.0 0.2
ø13.0 0.5
8.0 0.1
3.3 0.1
User direction of feed
Cover film
17.0 0.3
19.4 1.0
3° max.
6.3 0.1
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ
(in mm)
Continued on the following page.
74
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
!Note
P05E.pdf
Ceramic Discriminators Standard Land Pattern Dimensions/Packaging
Continued from the preceding page.
CDSCB Series
c
$IMENSIONS OF #ARRIER 4APE
Dimension of reel
4RAILER
ꢀ60 to ꢀ90
,EADER
Cover film
4.0 0.ꢀ
+0.ꢀ
øꢀ.ꢁ
-0
2.0 0.0ꢁ
%MPTY #OMPONENTS
%MPTY
240 to 280
øꢀ3.0 0.2
400 to ꢁ60
+0.ꢀ
2.0 0.ꢁ
4.0 0.ꢀ
øꢀ.ꢁ
-0
2.2 0.ꢀ
0EELING STRENGTH
0.ꢀ to 0.7N
(3°)
Cover film
+ꢀ.0
ꢀ0°
ꢀ3.0
-0
ꢀ7.0 ꢀ.0
User direction of feed
s 0ART NUMBER MARKED SIDE IS ALWAYS FACING UPꢀ
(
): Reference
(in mm)
75
• Please read rating and !CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!Note
P05E.pdf
• This catalog has only typical specifications because there is no space for detailed specifications. Therefore, please review our product specifications or consult the approval sheet for product specifications before ordering. Nov.24,2011
相关型号:
©2020 ICPDF网 联系我们和版权申明