SN8000 [MURATA]
SN8000/SN8000UFL Wi-Fi Module;
| 型号： | SN8000 |
| 厂家： | 
muRata |
| 描述： | SN8000/SN8000UFL Wi-Fi Module |
| 文件： | 总24页 (文件大小：854K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
SN8000/SN8000UFL
Wi-Fi Module
Datasheet
Version: 1.0
11/25/2013
Note: Murata Electronics N.A, Inc (Murata) reserves the right to make changes in specifications at any time and without
notice. The information furnished in this data sheet is believed to be accurate and reliable. However, no responsibility is
assumed by Murata for its use, nor any infringements of patents or other rights of third parties resulting from its use. No
license is generated under any rights of Murata or its supporters unless specifically agreed. Murata Electronics N.A, Inc
is a wholly owned subsidiary of Murata Manufacturing Compeny, Ltd. of Japan.
Revision History
Revision
Date
Author
Change Description
1.0
11/08/13
R. Willett
Initial version
Removed SyChip logo; revised copyright notice; revised
tech support information; deleted Chap 12 “Disclaimer;”
deleted one referenced document, 1.4 – Reference, page 6;
revised Table 14, page 20;
1.1
11/25/13
R Willett
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 2 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
Table of Contents
1
2
3
SYSTEM DESCRIPTIONS..................................................................................................................................... 5
1.1 APPLICATIONS........................................................................................................................................................5
1.2 BLOCK DIAGRAM ...................................................................................................................................................6
1.3 ACRONYMS.............................................................................................................................................................6
1.4 REFERENCE ............................................................................................................................................................6
MECHANICAL SPECIFICATIONS ..................................................................................................................... 7
2.1 MODULE DIMENSION (SN8000 / SN8000UFL).......................................................................................................7
2.2 MODULE TOP AND SIDE VIEW .................................................................................................................................7
2.3 PCB FOOTPRINT (TOP VIEW)...................................................................................................................................8
2.4 MODULE PIN-OUT...................................................................................................................................................9
DC ELECTRICAL SPECIFICATIONS .............................................................................................................. 11
3.1 TYPICAL POWER CONSUMPTION........................................................................................................................... 11
3.2 POWER UP/DOWN SEQUENCE............................................................................................................................... 12
3.3 GPIO INTERFACE ................................................................................................................................................. 12
3.4 SDIO INTERFACE ................................................................................................................................................. 13
3.4.1
3.4.2
SDIO Timing (Default Mode)..................................................................................................................... 14
SDIO Timing (High Speed Mode) .............................................................................................................. 15
3.5 GSPI INTERFACE................................................................................................................................................... 16
4
RF SPECIFICATIONS.......................................................................................................................................... 17
4.1 DC/RF CHARACTERISTICS FOR IEEE 802.11B ..................................................................................................... 17
4.2 DC/RF CHARACTERISTICS FOR IEEE 802.11G..................................................................................................... 18
4.3 DC/RF CHARACTERISTICS FOR IEEE 802.11N..................................................................................................... 19
5
6
ANTENNA INFORMATION................................................................................................................................ 20
ENVIRONMENTAL SPECIFICATIONS........................................................................................................... 20
6.1 ABSOLUTE MAXIMUM RATINGS ............................................................................................................................ 20
6.2 RECOMMENDED OPERATING CONDITIONS............................................................................................................ 20
7
PACKAGING AND MARKING INFORMATION............................................................................................ 21
7.1 CARRIER TAPE DIMENSIONS................................................................................................................................. 21
7.2 MODULE MARKING INFORMATION....................................................................................................................... 22
8
9
ORDERING INFORMATION ............................................................................................................................. 22
ROHS DECLARATION........................................................................................................................................ 22
10 REGULATORY INFORMATION....................................................................................................................... 23
11 TECHNICAL SUPPORT CONTACT ................................................................................................................. 24
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 3 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
LIST OF FIGURES
FIGURE 1 SN8000/8000UFL MODULE BLOCK DIAGRAM.....................................................................................................6
FIGURE 2 SN8000 TOP AND SIDE VIEW ............................................................................................................................... 7
FIGURE 3 SN8000UFL TOP AND SIDE VIEW........................................................................................................................8
FIGURE 4 DETAILED PAD DIMENSIONS (FOR BOTH SN8000 AND SN8000UFL) (TOP VIEW) ................................................8
FIGURE 5 BOOT-UP SEQUENCE........................................................................................................................................... 12
FIGURE 6 SDIO CONNECTION............................................................................................................................................. 13
FIGURE 7 SDIO TIMING (DEFUALT MODE)......................................................................................................................... 14
FIGURE 8 SDIO TIMING (HIGH SPEED MODE) .................................................................................................................... 15
FIGURE 9 GSPI SIGNAL TIMING .......................................................................................................................................... 16
FIGURE 10 GSPI INTERFACE ............................................................................................................................................... 16
FIGURE 11 CARRIER TAPE DIMENSIONS ............................................................................................................................. 21
FIGURE 12 SN8000 PIN1 ORIENTATION.............................................................................................................................. 21
FIGURE 13 MODULE MARKING DETAIL .............................................................................................................................. 22
LIST OF TABLES
TABLE 1 MODULE CONNECTOR SIGNAL DESCRIPTION ........................................................................................................9
TABLE 2 TYPICAL POWER CONSUMPTION FOR SN8000..................................................................................................... 11
TABLE 3 TYPICAL POWER CONSUMPTION FOR SN8000UFL.............................................................................................. 11
TABLE 4 DIGITAL I/O REQUIREMENTS................................................................................................................................ 12
TABLE 5 SDIO PIN DESCRIPTION ....................................................................................................................................... 13
TABLE 6 SDIO INTERFACE TIMING DEFAULT..................................................................................................................... 14
TABLE 7 SDIO TIMING - HIGH SPEED................................................................................................................................. 15
TABLE 8 SDIO PIN DESCRIPTION – GSPI MODE ................................................................................................................. 16
TABLE 9 RF CHARACTERISTICS FOR IEEE 802.11B............................................................................................................ 17
TABLE 10 RF CHARACTERISTICS FOR IEEE 802.11G.......................................................................................................... 18
TABLE 11 RF CHARACTERISTICS FOR IEEE 802.11N.......................................................................................................... 19
TABLE 12 EXTERNAL ANTENNA TO COMPLY WITH REGULATION (ONLY SN8000UFL)...................................................... 20
TABLE 13 ABSOLUTE MAXIMUM RATING.......................................................................................................................... 20
TABLE 14 RECOMMENDED OPERATING CONDITIONS......................................................................................................... 20
TABLE 15 ORDERING INFORMATION................................................................................................................................... 22
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 4 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
1 System Descriptions
SN8000/SN8000UFL
Wi-Fi Module
1.1
Applications
The SN8000 is a certified 2.4 GHz IEEE 802.11b/g/n Wi-Fi module
based on the Broadcom BCM43362 chipset. It is designed to fit indoor
and outdoor sensor and control applications. The SN8000 integrates a
Wi-Fi IC, RF front end, temperature compensated crystal (TCXO) and
an on-board antenna.
The SN8000 is compatible with Broadcom WICED™ SDK software to
support low power, low cost microcontroller platforms from STM32
ARM Cortex M3 and M4 families.
The SN8000 module is an ideal solution for home automation, industrial control, Smart Energy,
medical, and healthcare applications with or without cloud services.
A footprint compatible version with U.FL connector, SN8000UFL, is also available for use with
an external antenna.
Module Summary
2.4GHz IEEE 802.11b/g/n radio technology
Dimension: 24.0 mm × 11.4 mm × 2.0mm
Antenna Configuration: On-board chip antenna or U.FL connector
Transmit power: +18.5 dBm @ 802.11b
Receive sensitivity: -96dBm
Host interface: SDIO, SPI
Operating temperature range: -40ºC to 85ºC
RoHS2 compliant
MSL Level 3
FCC/IC certified; ETSI compliant
Compatible with Broadcom WICED™ SDK
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 5 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
1.2
Block Diagram
(for onboard
antenna version)
SN8000UFL
VDD_BAT
ANT
LDO
SDIO
SPI
BCM43362
(802.11b/g/n)
LPF
VDD_IO
Sleep_CLK
(Optional)
SPDT
TCXO
(for UFL
connector version)
Figure 1 SN8000/8000UFL Module Block Diagram
1.3
Acronyms
ISM Industrial, Scientific and Medical
MAC Medium Access Control
MSL
PER
Moisture Sensitivity Level
Packet Error Rate
ROHS Restriction of Hazardous Substances
SPI Serial Peripheral Interface
SDIO Secure Digital Input Output
1.4
Reference
[1] SN8000/SN8000UFL Wi-Fi Module User Manual, Murata
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 6 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
2 Mechanical Specifications
2.1
Module dimension (SN8000 / SN8000UFL)
Parameter
Dimension (LxWxH)
Typical
24.0 x 11.4 x 2.0
±0.2/±0.2/±0.15
Units
mm
Dimension tolerances (LxWxH)
mm
2.2
Module top and side view
Figure 2 SN8000 Top and Side View
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 7 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
Figure 3 SN8000UFL Top and Side View
2.3
PCB footprint (top view)
Figure 4 Detailed Pad Dimensions (For both SN8000 and SN8000UFL) (top view)
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 8 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
2.4
Module Pin-out
Table 1 Module Connector Signal Description
Pin #
Pin name
I/O
Description
1
2
GND
-
Ground
SDIO data line 2 with internal weak pull-up that can be
disabled.
SDIO_D2
I/O
3
4
JTAG_TDI
JTAG_TDO
-
-
JTAG_TDI, N/C otherwise.
JTAG_TDO, N/C otherwise.
GPIO/Coexistence output signal indicating
5
BTCX_FREQ/GPIO1
I/O Bluetooth transmission in restricted channel.
Hi-Z at power-up and reset.
GPIO/Strapping option for SDIO (pull low) or
I/O
6
7
GPIO0
SPI mode (pull high). Has weak internal pull down.
Auxiliary antenna selection (RFSW_CONTROL3).
ANT_SEL2
O
Default low.
Main antenna selection (RFSW_CONTROL0).
Default high.
8
9
ANT_SEL1
GND
O
-
I
Ground
Active low WLAN reset signal with internal
200K pull-down.
10
RST_N
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
VDD_3V3_EN
VDD_BAT
GND
I
I
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Enables 3.3V LDO
Module power supply
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 9 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
Pin #
Pin name
I/O
Description
27
GND
-
Ground
GPIO/Coexistence signal indicating Bluetooth priority
status and TX/RX direction. Hi-Z at power-up and reset.
28
29
30
31
BTCX_STATUS/GPIO4
BTCX_TXCONF/GPIO3
I/O
I/O
I/O
I
GPIO/Coexistence output giving Bluetooth permission
to transmit. Hi-Z at power-up and reset.
GPIO/Coexistence signal indicating Bluetooth is active.
Hi-Z at power-up and reset.
BTCX_RF_ACTIVE/GPIO5
SLEEP_CLK
Optional external 32KHz sleep clock. Tie to
GND if not used.
32
33
GND
-
I
Ground
VDD_IO
Power for IO and SDIO pads
SDIO data line 1 with internal weak pull-up that can be
disabled.
34
SDIO_D1/SPI_IRQ
SDIO_D0/SPI_MISO
I/O
SDIO data line 0 with internal weak pull-up that can be
disabled.
35
36
37
I/O
I
SDIO_CLK/ SPI_CLK
SDIO_CMD/ SPI_MOSI
SDIO/SPI clock.
SDIO command line with internal weak pull-up that can
be disabled.
I/O
SDIO data line 3 with internal weak pull-up that can be
disabled.
38
SDIO_D3/ SPI_CSX
I/O
39
40
41
42
43
44
45
46
47
48
49
GND
-
-
-
-
-
-
-
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
GND
Ground
JTAG_TCK
JTAG_TRSTN
JTAG_TMS
NC4
JTAG_TCK, N/C otherwise.
-
-
-
-
JTAG_TRSTN, N/C otherwise.
JTAG_TMS, N/C otherwise.
No connect
GND
Ground
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 10 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
3 DC Electrical Specifications
3.1
Typical Power Consumption
Condition: 25°C, VDD_BAT=3.6V, VDD_IO= 3.6V
Table 2 Typical Power Consumption for SN8000
Values
Units
Item
Condition
Min
Typ
Max
Receive mode
70
mA
mA
mA
11b
11g
11Mbps
54Mbps
Transmit mode
(18.5dBm/100% Duty Cycle)
315
70
Receive mode
Transmit mode
(14.5dBm/100 % Duty Cycle)
235
70
mA
Receive mode
mA
mA
MCS7
11n
Transmit mode
(13.5dBm/100% Duty Cycle)
225
Table 3 Typical Power Consumption for SN8000UFL
Values
Units
Item
Condition
11Mbps
54Mbps
Min
Typ
Max
Receive mode
70
mA
mA
mA
11b
11g
Transmit mode
(16.5dBm/100% Duty Cycle)
285
70
Receive mode
Transmit mode
235
70
mA
(14.5dBm/ 100 % Duty Cycle)
Receive mode
mA
mA
MCS7
11n
Transmit mode
(13.5dBm/100% Duty Cycle)
225
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 11 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
3.2
Power Up/Down Sequence
Figure 5 Boot-Up Sequence
3.3
GPIO Interface
Five general purpose I/O (GPIO) pins are available on the SN8000 that can be used to connect to
various external devices.
GPIOs are tristated by default. Subsequently, they can be programmed to be either input or output
pins via the GPIO control register. They can also be programmed to have internal pull-up or pull-
down resistors.
GPIO_0 is initially used as a strapping option to select between SDIO and SPI modes
GPIOs 3, 4, and 5 are multiplexed with the Bluetooth Coexistence Interface. By default, these pins
are BT_COEX pins. Software can reprogram these pins to behave as GPIOs.
GPIO_1 is a GPIO by default, but can be programmed to become the BCTX_FREQ signal.
Table 4 Digital I/O Requirements
SYM
min.
typ.
max.
unit
V
Input low voltage (VDD_IO = 3.3V)
Input high voltage (VDD_IO = 3.3V)
V
-
-
0.8
I
V
2.0
-
-
VDD_IO
V
IH
)
V
-
0.7
V
Input low voltage (VDD_IO = 1.8V)
I
Input high voltage (VDD_IO = 1.8V)
Input low voltage (RESET pin)
Input high voltage (RESET pin)
Output low voltage
V
1.1
-
VDD_IO
V
IH
VIL
-
-
0.4
3.6
0.4
-
V
V
1.08
-
V
IH
OL
OH
IL
V
-
-
V
Output high voltage
V
VDD_IO-0.4
-
V
Input low current
I
-
-
0.3
0.3
-
uA
uA
Input high current
I
-
IH
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 12 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
3.4
SDIO Interface
Table 5 SDIO Pin Description
(i) SD 4-bit Mode
No.
Pin Name
(ii) SD 1-bit Mode
2
SDIO_D2
SDIO_D1
SDIO_D0
SDIO_CLK
SDIO_CMD
SDIO_D3
DATA2
Data line 2
NC
IRQ
Not used
Interrupt
34
35
36
37
38
DATA1
DATA0
CLK
Data line 1 /Interrupt
Data line 0
DATA
CLK
CMD
NC
Data line
Clock
Clock
CMD
Command line
Data line 3
Command line
Not used
DATA3
Figure 6 SDIO Connection
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 13 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
3.4.1 SDIO Timing (Default Mode)
Figure 7 SDIO Timing (Defualt Mode)
Table 6 SDIO Interface Timing Default
Symbol
Min(1)
Clock CLK (All values are referred to min. VIH and max. VIL(2)
Parameter
Typ(1)
Max(1) Unit
Frequency-Data Transfer Mode
Frequency-Identification Mode
Clock Low Time
fPP
0
-
-
-
-
-
-
25
MHz
kHz
ns
fOD
0
400
-
tWL
tWH
tTLH
tTHL
10
10
-
Clock High Time
-
ns
Clock Rise Time
10
10
ns
Clock Falling Time
-
ns
Inputs: CMD, DAT (referenced to CLK)
Input Setup Time
tISU
tIH
5
5
-
-
-
-
ns
ns
Input Hold Time
Outputs: CMD, DAT (referenced to CLK)
Output Delay time-Data Transfer Mode
tODLY
tODLY
0
0
-
-
14
50
ns
ns
Output Delay time-Identification Mode
(1). Timing is based on CL < 40pF load on CMD and Data.
(2). Min (Vih) = 0.7*VDDIO and max (Vil) = 0.2*VDDIO.
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 14 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
3.4.2 SDIO Timing (High Speed Mode)
Figure 8 SDIO Timing (High Speed Mode)
Table 7 SDIO Timing - High Speed
Symbol
Min (1)
Clock CLK (All values are referred to min. VIH and max. VIL(2)
Parameter
Typ (1)
Max(1)
Unit
Frequency-Data Transfer Mode
Frequency-Identification Mode
Clock Low Time
fPP
0
0
7
7
-
-
-
-
-
-
-
50
400
-
MHz
kHz
ns
fOD
tWL
tWH
tTLH
tTHL
Clock High Time
-
ns
Clock Rise Time
3
ns
Clock Falling Time
-
3
ns
Inputs: CMD, DAT (referenced to CLK)
Input Setup Time
tISU
tIH
6
2
-
-
-
-
ns
ns
Input Hold Time
Outputs: CMD, DAT (referenced to CLK)
Output Delay time-Data Transfer Mode
Output Hold time
tODLY
tOH
-
-
-
-
14
-
ns
ns
pF
2.5
-
Total System Capacitance (each line)
CL
40
(1). Timing is based on CL < 40pF load on CMD and Data.
(2). Min (Vih) = 0.7*VDD_IO and max (Vil) = 0.2*VDD_IO.
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 15 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
3.5
gSPI Interface
The gSPI device always samples data on the rising edge of the clock.
Figure 9 gSPI Signal Timing
Table 8 SDIO Pin Description – gSPI Mode
Pin
gSPI Mode
2
NC
Not used
Interrupt
Data output
Clock
34
35
36
37
38
IRQ
DO
SCLK
DI
Data Input
Card select
CS
gSPI
Host
SN8000
Figure 10 gSPI Interface
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 16 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
4 RF Specifications
4.1
DC/RF Characteristics for IEEE 802.11b
Conditions: 25deg.C, VDD_BAT=3.6V, VDD_IO= 3.3V
(11Mbps mode unless otherwise specified.)
Parameters measured at RF connector except EIRP
Table 9 RF Characteristics for IEEE 802.11b
Parameters
Specification
DSSS/CCK
1,2,5.5,11Mbps
Min
Modulation
Physical layer data rate
RF Characteristics
Frequency range
Typ.
--
Max.
2483.5
+20
Unit
MHz
ppm
dBm
dBm
2400
Carrier frequency error
Transmit output power 1
Transmit power, EIRP
Spectrum mask
-20
--
SN8000UFL
SN8000
15.0
17.0
18.5
19.0
1st side lobes
--
--
--
--
--
--
-30
-50
2
dBr
dBr
usec
dBc
%
2nd side lobes
--
Power-on and Power-down ramp
RF Carrier Suppression
Modulation accuracy (EVM)
Outband spurious emissions
30MHz to 1GHz (BW=100KHz)
--
15
--
--
35
-96
-41
-65
-85
dBm
dBm
dBm
dBm
1GHz to 12.75GHz (BW=1MHz)
1.8GHz to 1.9GHz (BW=1MHz)
5.15GHz to5.3GHz (BW=1MHz)
Receive Sensitivity1
1Mbps (FER≤ 8%)
-94
-86
-9.5
35
-96
-88
--
--
--
--
dBm
11Mbps (FER≤ 8%)
dBm
dBm
Maximum input level (FER≤ 8%)
Adjacent channel rejection (FER≤ 8%)
dB
[Note]
1. Derate by 1.5 dB for temperatures less than -10 ºC or more than +55 ºC in both transmit and
receive modes.
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 17 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
4.2
DC/RF Characteristics for IEEE 802.11g
Condition: 25deg.C, VDD_BAT=3.6V, VDD_IO= 3.3V
(54Mbps mode unless otherwise specified.)
Parameters measured at RF connector except EIRP
Table 10 RF Characteristics for IEEE 802.11g
Parameters
Specification
Standard conformance
Modulation
IEEE 802.11 g
OFDM
Data rate
6, 9, 12, 18, 24, 36, 48, 54Mbps
RF Characteristics
Min
2400
-20
Typ.
--
Max.
2483.5
+20
Unit
MHz
ppm
dBm
dBm
Frequency range
Carrier frequency error
Transmit output power 1
Transmit power, EIRP
Spectrum mask
--
SN8000UFL
SN8000
12.5
14.5
14.5
16.5
9MHz to 11MHz (0dB ~ -20dB)
11MHz to 20MHz (-20dB ~ -28dB)
20MHz to 30MHz (-28dB ~ -40dB)
30MHz to 33MHz (-40dB)
Constellation Error (EVM)
Outband spurious emissions
30MHz to 1GHz (BW=100KHz)
0
0
0
0
--
-
dB
dB
dB
dB
dB
-
-
-
--
-25
-96
-41
-65
-85
dBm
dBm
dBm
dBm
1GHz to 12.75GHz (BW=1MHz)
1.8GHz to 1.9GHz (BW=1MHz)
5.15GHz to5.3GHz (BW=1MHz)
Receive Sensitivity1
6Mbps (PER≤ 10%)
-87
-72
-13
-1
-89
-74
--
--
--
--
dBm
dBm
dBm
dB
54Mbps (PER ≤ 10%)
Maximum input level (PER ≤ 10%)
Adjacent channel rejection (PER ≤ 10%)
[Note]
1. Derate by 1.5 dB for temperatures less than -10 ºC or more than +55 ºC in both transmit and
receive modes.
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 18 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
4.3
DC/RF Characteristics for IEEE 802.11n
Condition: 25deg.C, VDD_BAT=3.6V, VDD_IO= 3.3V
(65Mbps mode unless otherwise specified.)
Parameters measured at RF connector except EIRP
Table 11 RF Characteristics for IEEE 802.11n
Parameters
Specification
Standard conformance
Modulation
IEEE 802.11 n
OFDM
Data rate
6.5, 13, 19.5, 26, 39, 52, 58.5, 65Mbps
RF Characteristics
Min
2400
-20
Typ.
--
Max.
2483.5
+20
Unit
MHz
ppm
dBm
dBm
Frequency range
Carrier frequency error
Transmit output power 1
Transmit power, EIRP
Spectrum mask
--
SN8000UFL
SN8000
11.5
13.5
13.5
15.5
9MHz to 11MHz (0dB ~ -20dB)
11MHz to 20MHz (-20dB ~ -28dB)
20MHz to 30MHz (-28dB ~ -45dB)
30MHz to 33MHz (-45dB)
Constellation Error (EVM)
Outband spurious emissions
30MHz to 1GHz (BW=100KHz)
0
0
0
0
--
-
dB
dB
dB
dB
dB
-
-
-
--
-28
-96
-41
-65
-85
dBm
dBm
dBm
dBm
1GHz to 12.75GHz (BW=1MHz)
1.8GHz to 1.9GHz (BW=1MHz)
5.15GHz to5.3GHz (BW=1MHz)
Receive Sensitivity1
65Mbps (PER ≤ 10%)
-69
-13
-2
-71
--
dBm
dBm
dB
Maximum input level (PER ≤ 10%)
Adjacent channel rejection (PER ≤ 10%)
[Note]
1. Derate by 1.5 dB for temperatures less than -10 ºC or more than +55 ºC in both transmit and
receive modes.
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 19 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
5 Antenna Information
The table below shows the information of the reference antennae that are used in FCC, IC and ETSI
testing for SN8000UFL.
Table 12 External Antenna to comply with regulation (Only SN8000UFL)
Part Number
TRF-1002
Vendor
Gain (dBi)
5.0
Antenna Type
Connector
U.FL
Remarks
For FCC/IC
compliance
Microchip
Omnidirectional
For FCC/IC and
ETSI compliance
For FCC/IC and
ETSI compliance
W1049B050
W3525B100
Pulse
Pulse
2.0
2.0
Omnidirectional
Omnidirectional
U.FL
U.FL
6 Environmental Specifications
6.1
Absolute maximum ratings
Table 13 Absolute Maximum Rating
Symbol
Description
Min
Max
Unit
Tsop
Specification temperature
Operating temperature
-30
-40
85
85
C
C
T *
op
Storage temperature
IO Power supply
-40
0
85
3.6
5.0
0
C
V
T
st
VDD_IO
VDD_BAT
RFin
Power supply
0
V
RF input power
dBm
MSL
Moisture Sensitivity Level
Restriction of Hazardous Substances
3
RoHS2
Compliant
*Note: RF performance may be degraded at extreme temperatures.
6.2
Recommended Operating Conditions
Table 14 Recommended Operating Conditions
Min (V) Typ (V) Max (V) Description
1.75
3.0
3.3
3.6
3.6
5.0
Supply to the IO pads
Supply to BCM43362 BB/MAC/RF
VDD_IO
VDD_BAT
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 20 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
7 Packaging and Marking Information
7.1
Carrier Tape Dimensions
Figure 11 Carrier Tape Dimensions
Figure 12 SN8000 Pin1 Orientation
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 21 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
7.2
Module Marking Information
Module Marking for SN8000
Module Marking for SN8000UFL
Figure 13 Module Marking Detail
8 Ordering Information
Table 15 Ordering Information
RFM Model
Number
RFM Part
Number
Standard Order
Increment
Product
SN8000 Evaluation Development Kit
SN8000 Module in Tape & Reel
SN8000EVK
SN8000
88-00153-85
88-00153-00
88-00153-87
88-00153-02
1 pc
400 pcs/reel
1 pc
SN8000UFL Evaluation Development Kit
SN8000UFL Module in Tape & Reel
SN8000UFL EVK
SN8000UFL
400 pcs/reel
9 RoHS Declaration
To the best of our present knowledge, given our supplier declarations, this product does not contain
substances that are banned by Directive 2011/65/EU or contain a maximum concentration of 0.1%
by weight in homogeneous materials for
Lead and lead compounds
Mercury and mercury compounds
Chromium (VI)
PBB (polybrominated biphenyl)
PBDE (polybrominated biphenyl ether)
And a maximum concentration of 0.01% by weight in homogeneous materials for
Cadmium and cadmium compounds
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 22 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
10 Regulatory Information
The table below shows the regulatory compliance status of the SN8000/8000UFL module.
Regulatory Body
FCC
IC
Standard
Certificate ID
QPU8000
4523A-SN8000
Compliant
Part 15
RSS-210
EN300 328, Ver. 1.8.1
ETSI EN301.489 - 17
ETSI
For more information, see SN8000/SN8000UFL Wi-Fi Module User Manual [2].
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 23 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
11 Technical Support Contact
For technical support, please contact us at tech_sup@murata.com.
Murata Electronics N.A., Inc.
4441 Sigma Road
Dallas, TX 75244
USA
www.murata-ws.com Email: modules@murata.com
©2013 by Murata
Page 24 of 24
SN8000/SN8000UFL Wi-Fi Module Datasheet v1.0 -11/8/2013
相关型号：
©2020 ICPDF网 联系我们和版权申明