XRCMD32M000FXP53R0 [MURATA]
Parallel - Fundamental Quartz Crystal,;
| 型号： | XRCMD32M000FXP53R0 |
| 厂家： | 
muRata |
| 描述： | Parallel - Fundamental Quartz Crystal, 驱动 晶体 谐振器 |
| 文件： | 总32页 (文件大小：1049K) |
| 中文： | 中文翻译 | 下载： | 下载PDF数据表文档文件 |
P79E.pdf
Oct.1,2018
Crystal Units/Crystal Oscillators
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
•
All the products in this catalog comply
with EU RoHS.
•
EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
•
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
EU RoHS Compliant
•
All the products in this catalog comply
with EU RoHS.
•
EU RoHS is "the European Directive
2011/65/EU on the Restriction of the
Use of Certain Hazardous Substances in
Electrical and Electronic Equipment."
For more details, please refer to our web
page, "Murata's Approach for EU RoHS"
(https://www.murata.com/en-eu/support/
compliance/rohs).
•
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
1
Contents
Product specifications are as of October 2018.
Bluetoothr is a registered trademark or trademark
of Bluetooth SIG, Inc. in the United States and
other countries.
2
3
Selection Guide
Part Numbering
p2
p3
1 Crystal Units for Consumer and Industrial
Features, Applications
Appearance, Dimension
Series
p5
p5
p6
Part Number List
p6
Standard Land Pattern Dimensions
Notice
Packaging
p9
p10
p14
2
Crystal Oscillators for Consumer and Industrial
Features, Applications
Appearance, Dimension
Series
p17
p17
p17
p17
p18
p19
p21
Part Number List
Standard Land Pattern Dimensions
Notice
Packaging
3 Crystal Units for Automotive
Features, Applications
Appearance, Dimension
Series
p22
p22
p22
p23
p24
p25
p27
Part Number List
Standard Land Pattern Dimensions
Notice
Packaging
Measuring Circuit of Crystal Units
p28
Please check the MURATA website (https://www.murata.com/)
if you cannot find a part number in this catalog.
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Selection Guide
Applications
Car Multimedia
Consumer/Industrial
Crystal Units
Automotive
(Limited Applications)
Crystal Units
Crystal Oscillators
Crystal Units
Crystal Units
±1355p
HCR2316
±1355p
MCR1213
±3.2855pmpꢀx.
TTS1/VSH0TTS1/VCH
±±30±430±13355p
HCR2316
±±30±430±13355p
HCR2316
XRCGB_F_H
XRCTD
XRCGB_F_A
XRCGB_F_G
2.3×1.6×3.7pp
XTCLH_J
2/.3333-±2.3333MHz
1.2×1.3×3.±pp
2.3×1.6×3.7pp
2.3×1.6×3.7pp
4.3×±.2×1.4pp
±2.3333-42.3333MHz
2/.3333-/8.3333MHz
2/.3333-/8.3333MHz
13.3333-43.3333MHz
±2355p
HCR2316
MCR1612
HCR2423
XRCGB_F_P
XRCHA_F_A
XRCFD
2.3×1.6×3.7pp
2.4×2.3×3.8pp
1.6×1.2×3.±4pp
16.3333-±8./333MHz
16.3333-2/.3333MHz
2/.3333-29.9999MHz
XRCPB_F_P
2.3×1.6×3.4pp
XRCMD
2/.3333-±2.3333MHz
1.6×1.2×3.±±pp
±3.3333-/8.3333MHz
±±30/455p
HCR2316
TSS-43±2A
XRCGB_F_M
XRCLK
2.3×1.6×3.7pp
16.3333-43.3333MHz
4.3×±.2×1.34pp
13.3333-42.3333MHz
TAS-43±2F
XRCPB_F_M
2.3×1.6×3.4pp
2/.3333-43.3333MHz
XRCLH
±13355p
HCR2316
4.3×±.2×1.3pp
13.3333-42.3333MHz
XRCGB_F_L
2.3×1.6×3.7pp
16.3333-43.3333MHz
XRCPB_F_L
2.3×1.6×3.4pp
2/.3333-43.3333MHz
HCR2423
XRCHA_F_L
2.4×2.3×3.8pp
16.3333-23.3333MHz
2
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
o Part Numbering
Crystal Unit
(PꢀrtmNupber)
R0
9
XR
1
C
2
GB 24M000
F
5
0
6
L
7
00
8
3
4
1ProductmID
6FrequencymTolerꢀnce
Product ID
Frequency Tolerance
±13355p
Code
0
XR
CrystꢀlmUnit
±1355p
1
2LeꢀdmStyle
±2355p
2
Code
Lead Style
±±355p
3
C
SMD
±/455p
4
±4355p
5
3Sizem·mStructure
±2455p
A
Code
TD
Size · Structure
TotꢀlmFrequencymTolerꢀnce*1
X
1213m(STD)mMetꢀlmSeꢀling
1612m(STD)mMetꢀlmSeꢀling
1mIncludingmInitiꢀlmTorelꢀnce+Tep5erꢀturemChꢀrꢀcteristics
*
FD
7FrequencymShifmbymTep5erꢀture
MD
GB
PB
1612m(LowmProfile)mMetꢀlmSeꢀling
2316m(STD)mResinmSeꢀling
2316m(LowmProfile)mResinmSeꢀling
43±2mMetꢀlmSeꢀling
Frequency Shiꢀ by Temperature
Code
A
±13355pmpꢀx.m(Autopotivem rꢀde)
±4355pm(CꢀrmMultipediꢀm rꢀde)
±4355pmpin.
LH
G
LK
43±2mSeꢀpmSeꢀling
L
±/355p
M
4NopinꢀlmCentermFrequency
Ex5ressedmbymsix-digitmꢀl5hꢀnuperic.mThemunitmisminmhertzm(Hz).m
Decipꢀlm5ointmismex5ressedmbymcꢀ5itꢀlmletterm"M".
±2455pmorm±355p
±2355p
N
P
±1355pmtom±1455p
H/Q
5OvertonemOrder
8IndividuꢀlmS5ecificꢀtion
Overtone Order
Fundꢀpentꢀl
Code
Code
F
Two-digitmꢀl5hꢀnupericsmex5ressm
IndividuꢀlmS5ecificꢀtion.m
**
CustopizedmFundꢀpentꢀl
K
00:mStꢀndꢀrdms5ecificꢀtionmty5e.
9Pꢀckꢀgingm(QuꢀntitymꢀndmPlꢀsticmtꢀ5ingmreelmdiꢀpetermꢀrem
ex5ressedmbymone-digitmnupberminm"*")
Packaging
Code
PlꢀsticmTꢀ5ing
R*/E*/J*/P*
3
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Crystal Oscillator
(Part Number)
P0
9
XN
1
C
2
HH 19M200
T
5
J
6
E
7
A5
8
3
4
1Product ID
6Frequency Tolerance
Product ID
Frequency Tolerance
Code
XT
XN
VC-TCXO
TCXO
±±.0 to ±±.1ppm
J
7Frequency Shif by Temperature
2Lead Style
Frequency Shiꢀ by Temperature
Code
Code
Lead Style
±0.5ppm max.
E
J
C
SMD
Less than ±0.3ppm
3Size · Structure
8Individual Specification
Code
HH
JH
Size · Structure
Code
2520 Metal Sealing
3225 Metal Sealing
5032 Metal Sealing
Two-digit alphanumerics express
Individual Specification.
**
LH
9Packaging (Quantity and Plastic taping reel diameter are
expressed by one-digit number in "*")
4Nominal Center Frequency
Expressed by six-digit alphanumeric. The unit is in hertz (Hz).
Decimal point is expressed by capital letter "M".
Packaging
Code
Plastic Taping
E*/G*/P*
5Output Wave
Output Wave
Clipped Sign Wave
CMOS
Code
T
C
4
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Crystal Units
Lead
free
RoHS
1
for Consumer and Industrial
1.2 0.1
These crystal units feature a small package and highly
accurate frequency, based on Murata's excellent package
technology and high grade quartz crystal elements.
Features
0.63
1. This series is ideal for applications requiring high accuracy
crystal units, especially communication clocks such
as GPS, Wi-Fi, B.T. (Bluetooth ), BLE (Bluetooth Low
Energy), SATA and USB3.0.
2. The crystal units are extremely small, contributing to a
reduction in the mounting area.
(1)
(4)
(2)
(3)
(1) Crystal Terminal
(2) GND
(3) Crystal Terminal
(4) No Connect
r
r
XRCTD
(MCR1210)
Marking
Monthly Code
32.0000–52.0000MHz
0.42
(in mm)
3. The series complies to RoHS directive, being lead-free
(phase 3).
1.6 0.1
Applications
1. Clock for GPS controller ICs:
smartphone, wearable equipment, module, etc.
2. Clock for Wi-Fi, B.T. and ACPU controller ICs:
smartphone, wearable device, module, etc.
3. Clock for BLE controller ICs:
wearable, fitness and healthcare devices, module, etc.
4. Storage devices with SATA interface:
HDD, SSD, Optical storage device, etc.
5. Clock for USB (Ultra-Speed and High-Speed) controller
ICs: Mobile phone, DVC, DSC, Portable audio,
PC peripheral, etc.
1.08
(1)
(2)
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
(4) GND
XRCFD
(MCR1612)
Marking
Monthly Code
(4)
(3)
24.0000–29.9999MHz
0.45 0.08
1.6 0.1
(in mm)
6. Clock for PC, visual equipment controller ICs
7. Audio equipment and musical instrument, etc.
8. Clock for PLC, Inverter, Servo Amp, Servo Motor, etc.
controller ICs
9. Clock for LCD, Programmable display and Visual
equipment controller ICs
10. Other applications for replacement of other crystal
units or oscillators.
1.08
(1)
(4)
(2)
(3)
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
(4) GND
XRCMD
(MCR1612)
30.0000–48.0000MHz
Marking
Monthly Code
0.45 0.08
2.0 0.1
(in mm)
2.0 0.1
(1.8)
(1.8)
(0.3)
(0.2)
(0.1)
(1)
(0.1)
(2)
(0.1)
(0.1)
(2)
0.5 0.1
0.5 0.1
(1)
(1) Crystal Terminal
(2) No Connect
(1) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
(3) Crystal Terminal
(0.15)
(0.15)
XRCGB
(HCR2016)
16.0000–50.0000MHz
XRCPB
(HCR2016)
24.0000–50.0000MHz
Marking
Monthly Code
Marking
Monthly Code
(3)
(3)
1.3 0.1
1.3 0.1
0.25 0.1
0.25 0.1
(in mm)
(in mm)
Continued on the following page.
5
• Please read rating and CAU(ION ꢁfor storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking andꢂor burning, etc.
!
P79E.ꢀdf
Oct.1,2018
Note
!
• (his catalog has only tyꢀical sꢀecifications. (herefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.
Continued from the preceding page.
2.5 0.1
0.4 0.1
5.0 0.2
Marking
1
(2.4)
(0.3)
(0.2)
(0.2)
1.2 0.2
C0.5
0.85 0.1
1.2 0.2
(1)
Pin Connection
(1) (3): Crystal Terminal
(2) (4): Case GND
(2)
(3)
XRCHA_F_L
(HCR2520)
16.0000–20.0000MHz
XRCLK
Marking
(4)
(TSS-5032A)
Monthly Code
10.0000–52.0000MHz
1.45 0.1
2.6 0.2
(in mm)
(in mm)
0.4 0.1
5.0+0.05
–0.2
(4)
(1)
(3)
(2)
Marking
Pin Connection
(1) (3): Crystal Terminal
3-2.6
(2) (4) (5) (6) (7): Case GND
4-(1.2) 0.2
C0.3
Index
(1)
(2)
(5)
(7)
(6)
XRCLH
(4)
4-(R0.2)
(3)
3-0.15
(TAS-5032F)
10-(0.1)
10.0000–52.0000MHz
9-1.1
(in mm)
Series
Frequency Tolerance
Frequency Shift
Frequency
Aging
Drive
Level
Operating
Frequency
(MHz)
Series
Type
Package
(ppm max.)
by Temperature (ppm max.)
Temperature
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year) (μW max.)
Range (°C)
XRCTD
XRCFD
XRCMD
MCR1210
MCR1612
32.0000 to 52.0000
24.0000 to 29.9999
30.0000 to 48.0000
24.0000 to 25.0000
26.0000 to 32.0000
16.0000
20ꢀꢀp ꢁ(otal)
-30 to +85
Metal
100
1
-20 to +70
10
10
-20 to +70
-30 to +85
XRCGB_F_H
XRCGB_F_P
2
5
300
300*1
60
40 ꢁ(otal)
24.0000 to 38.4000
20
20
40
XRCPB_F_P HCR2016
XRCGB_F_M
XRCPB_F_M
XRCGB_F_L
XRCPB_F_L
XRCHA_F_L HCR2520
XRCLK
XRCLH
Resin
16.0000 to 50.0000
24.0000 to 50.0000
16.0000 to 50.0000
24.0000 to 50.0000
16.0000 to 20.0000
30ꢂ 45
-30 to +85
100
100
10
50
100
15
TSS-5032A Seap
TAS-5032F Metal
3
10.0000 to 52.0000
1 ꢁ 3ꢂ5/ears)
XRCPB series is a low ꢀrofile tyꢀe of XRCGB series.
*1 16MHz: 100µW pax.
Part Number List
<XRCTD/XRCFD/XRCMD>
Frequency Tolerance
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
(ppm max.) by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCTD37M400FXQ50R0 MCR1210 37.4000
XRCFD26M000FYQ01R0 MCR1612 26.0000
XRCMD32M000FXP50R0 MCR1612 32.0000
XRCMD37M400F1Q01R0 MCR1612 37.4000
XRCMD38M400FXQ56R0 MCR1612 38.4000
XRCMD40M000FXQ57R0 MCR1612 40.0000
XRCMD48M000FXQ58R0 MCR1612 48.0000
* Equivalent Series Resistance
20ꢀꢀp ꢁ(otal)ꢁ-30 to +85°C)
20ꢀꢀp ꢁ(otal)ꢁ-30 to +85°C)
30ꢀꢀp ꢁ(otal)ꢁ-30 to +85°C)
10ꢁ-20 to +70°C)
60
150
100
60
6
8
100
100
100
100
100
100
100
6
10
1
1
1
1
8
20ꢀꢀp ꢁ(otal)ꢁ-30 to +85°C)
20ꢀꢀp ꢁ(otal)ꢁ-30 to +85°C)
20ꢀꢀp ꢁ(otal)ꢁ-30 to +85°C)
60
10
10
7
60
40
6
• Please read rating and CAU(ION ꢁfor storage, oꢀerating, rating, soldering, pounting and handling) in this catalog to ꢀrevent spoking and/or burning, etc.
!
P79E.ꢀdf
Oct.1,2018
Note
!
• (his catalog has only tyꢀical sꢀecifications. (herefore, ꢀlease aꢀꢀrove our ꢀroduct sꢀecifications or transact the aꢀꢀroval sheet for ꢀroduct sꢀecifications before ordering.
<XRCGB_F_H>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
300
1
XRCGB24M000F1H00R0 HCR2016 2±.0000
XRCGB25M000F1H00R0 HCR2016 25.0000
XRCGB26M000F1H00R0 HCR2016 26.0000
XRCGB32M000F1H00R0 HCR2016 32.0000
* Equivalent Series Resistance
±10
±10
±10
±10
±10 ꢁ-20 to +70°C)
±10 ꢁ-20 to +70°C)
±10 ꢁ-30 to +85°C)
±10 ꢁ-30 to +85°C)
±2
±2
±2
±2
80
80
60
60
6
6
6
6
300
300
300
<XRCGB_F_P/XRCPB_F_P>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCGB16M000FXN01R0 HCR2016 16.0000
XRCGB24M000F2P00R0 HCR2016 2±.0000
XRCGB25M000F2P00R0 HCR2016 25.0000
XRCGB26M000F2P00R0 HCR2016 26.0000
XRCGB27M000F2P00R0 HCR2016 27.0000
XRCGB27M120F2P00R0 HCR2016 27.1200
XRCGB30M000F2P00R0 HCR2016 30.0000
XRCGB31M250F2P00R0 HCR2016 31.2500
XRCGB32M000F2P00R0 HCR2016 32.0000
XRCGB38M400F2P00R0 HCR2016 38.±000
XRCPB24M000F2P00R0 HCR2016 2±.0000
XRCPB25M000F2P00R0 HCR2016 25.0000
XRCPB26M000F2P00R0 HCR2016 26.0000
XRCPB27M000F2P00R0 HCR2016 27.0000
XRCPB27M120F2P00R0 HCR2016 27.1200
XRCPB30M000F2P00R0 HCR2016 30.0000
XRCPB31M250F2P00R0 HCR2016 31.2500
XRCPB32M000F2P00R0 HCR2016 32.0000
* Equivalent Series Resistance
±±0ꢀꢀp ꢁ(otal)ꢁ-30 to +85°C)
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
200
150
150
150
150
150
100
100
100
100
150
150
150
150
150
100
100
100
8
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
100
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
±20 ꢁ-30 to +85°C)
<XRCGB_F_M/XRCPB_F_M>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCGB24M000F3M00R0 HCR2016 2±.0000
XRCGB24M576F3M00R0 HCR2016 2±.5760
XRCGB25M000F3M00R0 HCR2016 25.0000
XRCGB26M000F3M00R0 HCR2016 26.0000
XRCGB27M000F3M00R0 HCR2016 27.0000
XRCGB27M120F3M00R0 HCR2016 27.1200
XRCGB30M000F3M00R0 HCR2016 30.0000
XRCGB31M250F3M00R0 HCR2016 31.2500
XRCGB32M000F3M00R0 HCR2016 32.0000
XRCGB33M868F4M00R0 HCR2016 33.8688
XRCGB38M400F4M00R0 HCR2016 38.±000
XRCGB40M000F4M00R0 HCR2016 ±0.0000
XRCGB48M000F4M00R0 HCR2016 ±8.0000
XRCGB50M000F4M00R0 HCR2016 50.0000
XRCPB24M000F3M00R0 HCR2016 2±.0000
XRCPB24M576F3M00R0 HCR2016 2±.5760
XRCPB25M000F3M00R0 HCR2016 25.0000
XRCPB26M000F3M00R0 HCR2016 26.0000
XRCPB27M000F3M00R0 HCR2016 27.0000
XRCPB27M120F3M00R0 HCR2016 27.1200
XRCPB30M000F3M00R0 HCR2016 30.0000
XRCPB31M250F3M00R0 HCR2016 31.2500
* Equivalent Series Resistance
±30
±30
±30
±30
±30
±30
±30
±30
±30
±±5
±±5
±±5
±±5
±±5
±30
±30
±30
±30
±30
±30
±30
±30
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±±0 ꢁ-30 to +85°C)
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
±5
150
150
150
150
150
150
100
100
100
100
100
100
100
65
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
150
150
150
150
150
150
100
100
Continued on the following page.
7
•ꢁPleaseꢁreadꢁraꢂingꢁandꢁ CAUTIONꢁ forꢁsꢂorage,ꢁoperaꢂing,ꢁraꢂing,ꢁsoldering,ꢁmounꢂingꢁandꢁhandling)ꢁinꢁꢂhisꢁcaꢂalogꢁꢂoꢁprevenꢂꢁsmokingꢁand/orꢁburning,ꢁeꢂc.
!
P79E.pdf
Ocꢂ.±,20±8
Noꢂe
!
•ꢁThisꢁcaꢂalogꢁhasꢁonlyꢁꢂypicalꢁspecificaꢂions.ꢁTherefore,ꢁpleaseꢁapproveꢁourꢁproducꢂꢁspecificaꢂionsꢁorꢁꢂransacꢂꢁꢂheꢁapprovalꢁsheeꢂꢁforꢁproducꢂꢁspecificaꢂionsꢁbeforeꢁordering.
Continued from the preceding page.
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCPB32M000F3M00R0 HCR2016 -2.0000
XRCPB33M868F4M00R0 HCR2016 --.8688
XRCPB40M000F4M00R0 HCR2016 40.0000
XRCPB48M000F4M00R0 HCR2016 48.0000
XRCPB50M000F4M00R0 HCR2016 ꢀ0.0000
*ꢁEquivalenꢂꢁSeriesꢁResisꢂance
±-0
±4ꢀ
±4ꢀ
±4ꢀ
±4ꢀ
±40ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±40ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±40ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±40ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±40ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±00
±00
±00
±00
6ꢀ
6
6
6
6
6
-00
-00
-00
-00
-00
1
<XRCGB_F_L/XRCPB_F_L>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCGB24M000F0L00R0 HCR2016 24.0000
XRCGB24M576F0L00R0 HCR2016 24.ꢀ760
XRCGB25M000F0L00R0 HCR2016 2ꢀ.0000
XRCGB26M000F0L00R0 HCR2016 26.0000
XRCGB27M000F0L00R0 HCR2016 27.0000
XRCGB27M120F0L00R0 HCR2016 27.±200
XRCGB30M000F0L00R0 HCR2016 -0.0000
XRCGB31M250F0L00R0 HCR2016 -±.2ꢀ00
XRCGB32M000F0L00R0 HCR2016 -2.0000
XRCGB33M868F0L00R0 HCR2016 --.8688
XRCGB38M400F0L00R0 HCR2016 -8.4000
XRCGB40M000F0L00R0 HCR2016 40.0000
XRCGB48M000F0L00R0 HCR2016 48.0000
XRCGB50M000F0L00R0 HCR2016 ꢀ0.0000
XRCPB24M000F0L00R0 HCR2016 24.0000
XRCPB24M576F0L00R0 HCR2016 24.ꢀ760
XRCPB25M000F0L00R0 HCR2016 2ꢀ.0000
XRCPB26M000F0L00R0 HCR2016 26.0000
XRCPB27M000F0L00R0 HCR2016 27.0000
XRCPB27M120F0L00R0 HCR2016 27.±200
XRCPB30M000F0L00R0 HCR2016 -0.0000
XRCPB31M250F0L00R0 HCR2016 -±.2ꢀ00
XRCPB32M000F0L00R0 HCR2016 -2.0000
XRCPB33M868F0L00R0 HCR2016 --.8688
XRCPB40M000F0L00R0 HCR2016 40.0000
XRCPB48M000F0L00R0 HCR2016 48.0000
XRCPB50M000F0L00R0 HCR2016 ꢀ0.0000
*ꢁEquivalenꢂꢁSeriesꢁResisꢂance
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±±00
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ0ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ
±ꢀ0
±ꢀ0
±ꢀ0
±ꢀ0
±ꢀ0
±ꢀ0
±00
±00
±00
±00
±00
±00
±00
±00
±ꢀ0
±ꢀ0
±ꢀ0
±ꢀ0
±ꢀ0
±ꢀ0
±00
±00
±00
±00
±00
±00
±00
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
-00
<XRCHA_F_L>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCHA16M000F0L01R0 HCR2520 ±6.0000
XRCHA20M000F0L01R0 HCR2520 20.0000
*ꢁEquivalenꢂꢁSeriesꢁResisꢂance
±±00
±±00
±±00ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±±00ꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±ꢀ
±ꢀ
±00
80
8
8
-00
-00
<XRCLK>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCLK10M000F1QA8P0 TSS-5032A ±0.0000
XRCLK12M000F1QA6P0 TSS-5032A ±2.0000
XRCLK14M745F1QB6P0 TSS-5032A ±4.74ꢀ6
XRCLK16M000F1QA7P0 TSS-5032A ±6.0000
XRCLK21M250F1QA8P0 TSS-5032A 2±.2ꢀ00
XRCLK52M000F1QA0P0 TSS-5032A ꢀ2.0000
*ꢁEquivalenꢂꢁSeriesꢁResisꢂance
±±0
±±0
±±0
±±0
±±0
±±0
±±ꢀꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±±ꢀꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±±ꢀꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±±ꢀꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±±ꢀꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±±ꢀꢁ (-0ꢁꢂoꢁ+8ꢀ°C)
±-
±-
±-
±-
±-
±-
80
60
60
60
60
60
8
8
8
8
8
8
60
60
60
60
60
60
8
•5Please5read5raꢁing5and5 CAUTION5 for5sꢁorage,5operaꢁing,5raꢁing,5soldering,5mounꢁing5and5handling)5in5ꢁhis5caꢁalog5ꢁo5prevenꢁ5smoking5and±or5burning,5eꢁc.
!
P79E.pdf
Ocꢁ.1,2018
Noꢁe
!
•5This5caꢁalog5has5only5ꢁypical5specificaꢁions.5Therefore,5please5approve5our5producꢁ5specificaꢁions5or5ꢁransacꢁ5ꢁhe5approval5sheeꢁ5for5producꢁ5specificaꢁions5before5ordering.
<XRCLH>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
60
1
XRCLH10M000F1QA4P0 TAS-5032F 10.0000
XRCLH12M000F1QA0P0 TAS-5032F 12.0000
XRCLH14M745F1QA0P0 TAS-5032F 14.74ꢀ6
XRCLH16M000F1QA2P0 TAS-5032F 16.0000
XRCLH21M250F1QA0P0 TAS-5032F 21.2ꢀ00
XRCLH52M000F1QA1P0 TAS-5032F ꢀ2.0000
*5Equivalenꢁ5Series5Resisꢁance
±10
±10
±10
±10
±10
±10
±1ꢀ5 (-05ꢁo5+8ꢀ°C)
±1ꢀ5 (-05ꢁo5+8ꢀ°C)
±1ꢀ5 (-05ꢁo5+8ꢀ°C)
±1ꢀ5 (-05ꢁo5+8ꢀ°C)
±1ꢀ5 (-05ꢁo5+8ꢀ°C)
±1ꢀ5 (-05ꢁo5+8ꢀ°C)
±15 ±-±ꢀ/ears) 60
±15 ±-±ꢀ/ears) 60
8
8
8
8
8
8
60
±15 ±-±ꢀ/ears) 40
±15 ±-±ꢀ/ears) 40
±15 ±-±ꢀ/ears) 40
±15 ±-±ꢀ/ears) 40
60
60
60
60
Standard Land Pattern Dimensions
XRCTD
(MCR1210)
XRCFD, XRCMD
(MCR1612)
(Recommended Land Pattern)
0.495 0.495
(Recommended Land Pattern)
0.70
0.70
0.21
0.30
(in mm)
(in mm)
(in mm)
(in mm)
XRCGB_F_H/P/M/L, XRCPB_F_P/M/L
(HCR2016)
XRCHA_F_L
(HCR2520)
(Recommended Land Pattern)
(Recommended Land Pattern)
0.4
0.75
0.75
0.60
1.35
(in mm)
XRCLK
(TSS-5032A)
XRCLH
(TAS-5032F)
1.5
1.5
3.9
Avoid putting signal lines under the product except referenced land pattern.
(in mm)
3.9
9
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Units for Consumer and Industrial-
1
<XRCTD, XRCFD, XRCMD Series>
Notice (Soldering and Mounting)
1.1. Soldering Condition
Reflow
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
Standard thickness of soldering paste: 0.10 to 0.15mm
Peak
260
245
220
Heating
(220°C min.)
180
150
Pre-heating
(150 to 180°C)
Gradual
Cooling
Condition
150 to 180°C
220°C min.
60 to 120 sec.
30 to 60 sec.
Pre-heating
Heating
60 to 120 sec.
30 to 60 sec.
245°C min. 260°C max. 5 sec. max.
Peak Temperature
1.2. Optimum Solder Amount for Soldering
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, the damage of
sealing part between the metal cap and the substrate
may occur.
2. Notice for Mounting
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
Continued on the following page.
10
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Units for Consumer and Industrial-
Continued from the preceding page.
1
Notice (Storage and Operating Condition)
1. Product Storage Condition
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately aꢀer the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
aꢀer delivery under the conditions of an unopened
package. Please use the products within 6 months aꢀer
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to the storage in a
chemical atmosphere.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Please confirm circuit the conditions on your set,
because irregular or stop oscillation may occur under
unmatched circuit conditions.
3. Please do not use these products in the following
applications in transportation equipment:
vehicles, trains, ships, etc.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
(example: engine control, brake control,
steering control, body control.)
11
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Units for Consumer and Industrial-
1
<XRCGB_F_H/P/M/L, XRCPB_F_P/M/L, XRCHA_F_L, XRCLK, XRCLH Series>
Notice (Soldering and Mounting)
1.1. Soldering Condition
(1) Reflow
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
Standard thickness of soldering paste: 0.10 to 0.15mm
Peak
260
245
220
Heating
(220°C min.)
180
150
Pre-heating
(150 to 180°C)
Gradual
Cooling
Condition
Pre-heating
Heating
150 to 180°C
220°C min.
60 to 120 sec.
30 to 60 sec.
60 to 120 sec.
30 to 60 sec.
245°C min. 260°C max. 5 sec. max.
Peak Temperature
(2) Soldering Iron
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied. Please keep solder
away from the metal cap (Lid) portion.
Condition
150°C 60 sec.
350°C max.
30W max.
Pre-heating
Heating of the Soldering Iron
Watt
ø3mm max.
5 sec. max.
Shape of the Soldering Iron
Soldering Time
Sn-3.0Ag-0.5Cu
Solder
1.2. Optimum Solder Amount for Soldering
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, the damage of
sealing part between the metal cap and the substrate
may occur.
2. Wash
The component cannot withstand washing.
3. Notice for Mounting
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
Continued on the following page.
12
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Units for Consumer and Industrial-
Continued from the preceding page.
1
Notice (Storage and Operating Condition)
1. Product Storage Condition
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately aꢀer the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
aꢀer delivery under the conditions of an unopened
package. Please use the products within 6 months aꢀer
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
4. Other
Conformal coating or washing of the component is not
acceptable.
Please be sure to consult with our sales representative
or engineer prior to using the products.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to the storage in a
chemical atmosphere.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Please confirm circuit the conditions on your set,
because irregular or stop oscillation may occur under
unmatched circuit conditions.
3. Please do not use these products in the following
applications in transportation equipment:
vehicles, trains, ships, etc.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
(example: engine control, brake control,
steering control, body control.)
13
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging -Crystal Units for Consumer and Industrial-
1
Dimensions of Taping
XRCTD
(MCR1210)
4.0 0.1
ꢀ.0 0.1
ø1.5+0.1
-0.0
ø0.5 0.1
1.3 0.1
4.0 0.1
Cover Film
(5°)
10°
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Direction of Feed
(in mm)
Minimum Quantity/Dimensions of Reel
Plastic Tape ø180mm
3,000
(pcs.)
Trailer
160 to 190
Leader
Cover Film
Empty
Components
Empty
160 min.
450 to 560
ø13.0 0.ꢀ
ꢀ.0 0.5
9.0+1.0
0
13.0 1.0
(in mm)
14
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging -Crystal Units for Consumer and Industrial-
1
Dimensions of Taping
XRCFD, XRCMD
(MCR1612)
XRCGB_F_H/P/M/L
(HCR2016)
4.0 0.1
4.0 0.1
+0.1
–0.0
+0.1
–0.0
ø1.5
ꢀ.0 0.1
ø1.5
ꢀ.0 0.1
ø0.8 0.1
ø1.0 0.1
1.85 0.1
1.45 0.1
4.0 0.1
Cover Film
4.0 0.1
Cover Film
(3°)
5° max.
10°
10°
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Direction of Feed
Direction of Feed
(in mm)
(in mm)
XRCPB_F_P/M/L
(HCR2016)
XRCHA_F_L
(HCR2520)
4.0 0.1
4.0 0.1
+0.1
–0.0
+0.1
–0.0
ø1.5
ø1.5
ꢀ.0 0.1
ꢀ.0 0.1
ø1.0 0.1
ø1.0 0.1
1.85 0.1
ꢀ.ꢀ5 0.1
4.0 0.1
Cover Film
4.0 0.1
Cover Film
5° max.
(5°)
10°
10°
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Direction of Feed
(in mm)
Direction of Feed
(in mm)
Minimum Quantity/Dimensions of Reel
Plastic Tape ø180mm
Plastic Tape ø330mm
3,000
9,000
(pcs.)
Trailer
160 to 190
Leader
Cover Film
Empty
Components
Empty
160 min.
400 to 560
ø13.0 0.ꢀ
ꢀ.0 0.5
9.0+1.0
0
13.0 1.0
(in mm)
15
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging -Crystal Units for Consumer and Industrial-
1
Dimensions of Taping
XRCLK
(TSS-5032A)
XRCLH
(TAS-5032F)
Drawing Out Direction
Drawing Out Direction
10 pitches cumulative 40.0 0.1
10 pitches cumulative 40.0 0.1
2.0 0.05
8.0
2.0 0.05
8.0
1.4
0.3 0.05
1.4
0.3 0.05
4.0
4.0
+0.1
–0.0
+0.1
–0.0
ø1.5
ø1.5
1
2
4
3
1
2
4
3
5° max.
5° max.
+0.1
–0.0
+0.1
–0.0
ø1.5
ø1.5
3.7
3.7
5° max.
5° max.
Note
Note
1) Radius “R” not mentioned is 0.3 max.
2) The tolerance not mentioned is 0.1.
1) Radius “R” not mentioned is 0.3 max.
2) The tolerance not mentioned is 0.1.
(in mm)
(in mm)
Minimum Quantity/Dimensions of Reel
Plastic Tape ø255mm
3,000
(pcs.)
Trailer
Leader
Cover Film
2.0
500 min.
2.0
R1.5
Empty
Components
Empty
150 min.
20
3-120°
250 min.
2.0 0.5
2.0
3-R1
R12.5
R4.5
13.5 1.0
18.4 max.
60
255 1
(in mm)
16
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Crystal Oscillators
Lead
free
RoHS
for Consumer and Industrial
5.0 0.2
(7) (6)
(8)
(5)
(4)
We offer a varied lineup of TCXO (Temperature compensated
crystal oscillator)/VC-TCXO (Voltage-controlled
temperature compensated crystal oscillator) based on
highly reliable crystal units, superior temperature
compensation and adjusting method fostered by
our long experience and expertise.
2
(1)
(2) (3)
1.5 max.
Pin Connection
(1): Vc
(2): NC
2.6
(2) (3)
1.1
(3): NC
(4): GND
(5): Clipped Sine Output
(6): NC
(7): NC
(8): Vcc
Marking
(1)
(4)
(5)
Features
1.2
XTCLH_J
(TTS14VSH/TTS14VCH)
10.0000–50.0000MHz
C0.5
0.4
1. Excellent frequency stability over temperature
2. Low profile
(in mm)
(8)
(7) (6)
3. Low supply voltage
4. SMD type (Reflow soldering available)
5. The series complies to RoHS directive,
being lead-free (phase 3).
Applications
1. Business radios
2. GPS (GNSS) systems
3. Small cells
4. Wireless devices
Series
Frequency Tolerance
Frequency Shift
Frequency
Aging
Operating
Frequency
(MHz)
VC
Series
Type
Size
Package
(ppm max.)
by Temperature (ppm max.)
Temperature
Range (°C)
Function
[at 25°C 3°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
TTS14VSH
TTS14VCH
0.2
0.28
XTCLH_J
5032
Metal 10.0000 to 50.0000
0.5
0.5
-40 to +85°C
Part Number List
<XTCLH_J>
Frequency Shift
by Temperature (ppm max.)
Frequency
Aging
Frequency
Frequency
(MHz)
Frequency Tolerance
(ppm max.)
Part Number
Type
Controlled Range
(ppm)
Output
[Standard Condition: +25°Cꢀ (ppm max./Year)
XTCLH19M200TJJC3P0 TTS14VSH 19.2000 0.5ppm max. (25 3°C)
XTCLH25M000TJJA5P0 TTS14VSH 25.0000 0.5ppm max. (25 3°C)
XTCLH26M000TJJA6P0 TTS14VSH 26.0000 0.5ppm max. (25 3°C)
XTCLH20M000CYJB6P0 TTS14VCH 20.0000 1.12ppm max. (25 2°C) 0.28(-40 to +85°C)
XTCLH40M000CYJC4P0 TTS14VCH 40.0000 1.12ppm max. (25 2°C) 0.28(-40 to +85°C)
XTCLH10M000CHJA1P0 TTS14VCH 10.0000 0.5ppm max. (25 3°C)
XTCLH20M000CHJA0P0 TTS14VCH 20.0000 0.5ppm max. (25 3°C)
XTCLH40M000CHJA0P0 TTS14VCH 40.0000 0.5ppm max. (25 3°C)
XTCLH50M000CHJA3P0 TTS14VCH 50.0000 0.5ppm max. (25 3°C)
0.2(-40 to +85°C)
0.2(-40 to +85°C)
0.2(-40 to +85°C)
0.5
0.5
0.5
0.8
0.8
0.5
0.5
0.5
0.5
3min. to 6max. Clipped Sine Wave
3min. to 6max. Clipped Sine Wave
3min. to 6max. Clipped Sine Wave
4.12min. to 9max.
4.12min. to 9max.
3min. to 6max.
3min. to 6max.
3min. to 6max.
3min. to 6max.
CMOS
CMOS
CMOS
CMOS
CMOS
CMOS
0.28(-40 to +85°C)
0.28(-40 to +85°C)
0.28(-40 to +85°C)
0.28(-40 to +85°C)
17
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Standard Land Pattern Dimensions
XTCLH_J (TTS14VSH/TTS14VCH)
5.6
2.4
2
C0.5
(in mm)
18
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Oscillators for Consumer and Industrial-
Notice (Soldering and Mounting)
1.1. Soldering Condition
(1) Reflow
260
255
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
220
175
175°C 25°C
2
Standard thickness of soldering paste: 0.10 to 0.15mm
Time (sec.)
Condition
120sec. max.
10sec. max.
150 to 200°C
220°C min.
120 sec. max.
55 sec. max.
Pre-heating
Heating
55sec. max.
255°C min. 260°C max. 10 sec. max.
Peak Temperature
(2) Soldering Iron
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or metal lid may be damaged if excessive
thermal stress is applied.
Condition
150°C 60 sec.
350°C max.
30W max.
Pre-heating
Heating of the Soldering Iron
Watt
ø3mm max.
5 sec. max.
Shape of the Soldering Iron
Soldering Time
Sn-3.0Ag-0.5Cu
Solder
1.2. Optimum Solder Amount for Soldering
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, damage of
sealing part between the metal cap and the substrate
may occur.
2. Wash
The component cannot withstand washing.
3. Notice for Mounting
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
Continued on the following page.
19
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Oscillators for Consumer and Industrial-
Continued from the preceding page.
Notice (Storage and Operating Condition)
1. Product Storage Condition
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately aꢀer the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
Please store the products in a room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
aꢀer delivery under the conditions of an unopened
package. Please use the products within 6 months aꢀer
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
2
4. Other
Conformal coating or washing of the component is not
acceptable.
Please be sure to consult with our sales representative
or engineer whenever and prior to using the products.
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
the solderability due to storage in a chemical
atmosphere.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
2. Please do not use these products in the following
applications in transportation equipment
(vehicles, trains, ships, etc.).
(example: engine control, brake control,
steering control, body control.)
20
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging -Crystal Oscillators for Consumer and Industrial-
Dimensions of Taping
XTCLH_J (TTS14VSH/TTS14VCH)
Drawing Out Direction
2.0 0.05
ꢀ.0 0.1
1.7 0.1
0.3 0.05
4.0 0.1
+0.1
–0.0
ø1.5
2
+0.1
ø1.5
–0.0
R0.3 max.
(in mm)
5° max.
3.7 0.1
5° max.
Material: Black Conductive PS
Note
1) Cumulative tolerance of 10 pitches
of the sprocket hole is 40.0 0.2mm.
R0.3 max.
Minimum Quantity/Dimensions of Reel
Plastic Tape ø255mm
2,000
(pcs.)
Trailer
500 min.
Leader
Cover Film
Empty
Components
Empty
150 min.
250 min.
2.0 0.5
ø21 0.ꢀ
ø13 0.2
Reel Label
13.5 1.0
17.5 1.0
ø254 2.0
21
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Crystal Units
AEC-
Q200
Lead
RoHS
free
for Automotive
2.5±±.ꢀ
These crystal units for automotive feature a small package
and highly accurate frequency, based on Murata's excellent
package technology and high grade quartz crystal elements.
(2.4)
(±.3)
Features
(±.2)
(±.2)
1. The series has high reliability and is available for a wide
temperature range.
±.85±±.ꢀ
2. The crystal units are extremely small, contributing to a
reduction in the mounting area.
3. The series complies to RoHS and ELV directives,
being lead-free (phase 3).
XRCHA_F_A
(HCR2520)
16.0000–24.0000MHz
Marking
Monthly Code
3
ꢀ.45±±.ꢀ
2.±±±.ꢀ
(in mm)
±.4±±.ꢀ
4. The series complies to AEC-Q200.
Applications
1. Power Train (ex. Engine/Transmission management ECU)
2. ADAS (ex. Camera for driver assist, Image processing,
Emergency Brake Assist ECU)
3. Chassis, Safety applications, etc.
4. Car multimedia equipment.
(ꢀ.8)
(±.3)
(±.2) (±.2)
±.5±±.ꢀ
(ꢀ)
(4)
(2)
(ꢀ) (3): Crystal Terminal
(2) (4): No Connect
XRCGB_F_A
(HCR2016)
24.0000–48.0000MHz
Marking
Monthly Code
(3)
ꢀ.3±±.ꢀ
2.±±±.ꢀ
(±.ꢀ5)
(in mm)
(ꢀ.8)
(±.3)
(±.ꢀ)
(ꢀ)
(±.ꢀ)
±.5±±.ꢀ
(2)
(ꢀ) Crystal Terminal
(2) No Connect
(3) Crystal Terminal
(±.ꢀ5)
XRCGB_F_G
(HCR2016)
24.0000–48.0000MHz
Marking
Monthly Code
(3)
ꢀ.3±±.ꢀ
±.25±±.ꢀ
(in mm)
Series
Frequency Tolerance
Frequency Shift
Frequency
Aging
Operating
Frequency
(MHz)
Series
Type
Package
(ppm max.)
by Temperature (ppm max.)
Temperature
Range (°C)
Applications
[at 25°C±±°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
ADAS,
Power Train,
Chassis, Safety
XRCHA_F_A HCR2520
16.0000 to 24.0000
±100
±100
±3±/±6±
±±0
±±
±2
±±
-40 to +12±*
-40 to +12±
-40 to +8±
ADAS,
Power Train,
Chassis, Safety
XRCGB_F_A
HCR2016
XRCGB_F_G
Resin
±30/±±0
24.0000 to 48.0000
Car Multimedia
±30/±4±/±100
+1±0°C is available.
*
22
•ꢀPleaseꢀreadꢀraꢁingꢀandꢀ CAUTIONꢀ forꢀsꢁorage,ꢀoperaꢁing,ꢀraꢁing,ꢀsoldering,ꢀmounꢁingꢀandꢀhandling)ꢀinꢀꢁhisꢀcaꢁalogꢀꢁoꢀprevenꢁꢀsmokingꢀand/orꢀburning,ꢀeꢁc.
!
P79E.pdf
Ocꢁ.1,2018
Noꢁe
!
•ꢀThisꢀcaꢁalogꢀhasꢀonlyꢀꢁypicalꢀspecificaꢁions.ꢀTherefore,ꢀpleaseꢀapproveꢀourꢀproducꢁꢀspecificaꢁionsꢀorꢀꢁransacꢁꢀꢁheꢀapprovalꢀsheeꢁꢀforꢀproducꢁꢀspecificaꢁionsꢀbeforeꢀordering.
Part Number List
<XRCHA_F_A (For Automotive)>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C±±°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
300
600
300
600
300
600
300
600
300
600
300
600
XRCHA16M000F0A01R0 HCR2520 16.0000
XRCHA16M000F0A11R0 HCR2520 16.0000
XRCHA16M000F0A12R0 HCR2520 16.0000
XRCHA16M000F0A13R0 HCR2520 16.0000
XRCHA20M000F0A01R0 HCR2520 20.0000
XRCHA20M000F0A11R0 HCR2520 20.0000
XRCHA20M000F0A12R0 HCR2520 20.0000
XRCHA20M000F0A13R0 HCR2520 20.0000
XRCHA24M000F0A01R0 HCR2520 2-.0000
XRCHA24M000F0A11R0 HCR2520 2-.0000
XRCHA24M000F0A12R0 HCR2520 2-.0000
XRCHA24M000F0A13R0 HCR2520 2-.0000
100
100
100
100
100
100
100
100
100
100
100
100
100ꢀ (-0ꢀꢁoꢀ+125°C)
100ꢀ (-0ꢀꢁoꢀ+125°C)
100ꢀ (-0ꢀꢁoꢀ+150°C)
100ꢀ (-0ꢀꢁoꢀ+150°C)
100ꢀ (-0ꢀꢁoꢀ+125°C)
100ꢀ (-0ꢀꢁoꢀ+125°C)
100ꢀ (-0ꢀꢁoꢀ+150°C)
100ꢀ (-0ꢀꢁoꢀ+150°C)
100ꢀ (-0ꢀꢁoꢀ+125°C)
100ꢀ (-0ꢀꢁoꢀ+125°C)
100ꢀ (-0ꢀꢁoꢀ+150°C)
100ꢀ (-0ꢀꢁoꢀ+150°C)
5
5
5
5
5
5
5
5
5
5
5
5
100
100
100
100
80
8
8
8
8
8
8
8
8
8
8
8
8
80
80
80
80
80
80
80
3
*ꢀEquivalenꢁꢀSeriesꢀResisꢁance
<XRCGB_F_A (For Automotive)>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
(MHz)
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
[at 25°C±±°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCGB24M000F3A00R0 HCR2016 2-.0000
XRCGB25M000F3A00R0 HCR2016 25.0000
XRCGB26M000F3A00R0 HCR2016 26.0000
XRCGB27M000F3A00R0 HCR2016 27.0000
XRCGB27M120F3A00R0 HCR2016 27.1200
XRCGB30M000F5A00R0 HCR2016 30.0000
XRCGB40M000F5A00R0 HCR2016 -0.0000
XRCGB48M000F5A00R0 HCR2016 -8.0000
30
30
30
30
30
50
50
50
35ꢀ (-0ꢀꢁoꢀ+125°C)
35ꢀ (-0ꢀꢁoꢀ+125°C)
35ꢀ (-0ꢀꢁoꢀ+125°C)
35ꢀ (-0ꢀꢁoꢀ+125°C)
35ꢀ (-0ꢀꢁoꢀ+125°C)
65ꢀ (-0ꢀꢁoꢀ+125°C)
65ꢀ (-0ꢀꢁoꢀ+125°C)
65ꢀ (-0ꢀꢁoꢀ+125°C)
2
2
2
2
2
2
2
2
120
100
80
6
6
6
6
6
6
6
6
300
300
300
300
300
300
300
300
80
80
70
70
60
*ꢀEquivalenꢁꢀSeriesꢀResisꢁance
<XRCGB_F_G (For Car Multimedia)>
Frequency Tolerance
(ppm max.)
Frequency Shift
Frequency
Aging
Load
Capacitance
(pF)
Drive
Level
Frequency
ESR*
(Ωmax.)
Part Number
Type
by Temperature (ppm max.)
(MHz)
[at 25°C±±°Cꢀ
[Standard Condition: +25°Cꢀ (ppm max./Year)
(μW max.)
XRCGB24M000F0G00R0 HCR2016 2-.0000
XRCGB24M000F3G00R0 HCR2016 2-.0000
XRCGB24M576F0G00R0 HCR2016 2-.5760
XRCGB24M576F3G00R0 HCR2016 2-.5760
XRCGB25M000F0G00R0 HCR2016 25.0000
XRCGB25M000F3G00R0 HCR2016 25.0000
XRCGB26M000F0G00R0 HCR2016 26.0000
XRCGB26M000F3G00R0 HCR2016 26.0000
XRCGB27M000F0G00R0 HCR2016 27.0000
XRCGB27M000F3G00R0 HCR2016 27.0000
XRCGB27M120F3G00R0 HCR2016 27.1200
XRCGB30M000F0G00R0 HCR2016 30.0000
XRCGB30M000F3G00R0 HCR2016 30.0000
XRCGB33M868F0G00R0 HCR2016 33.8688
XRCGB33M868F4G00R0 HCR2016 33.8688
XRCGB40M000F0G00R0 HCR2016 -0.0000
XRCGB40M000F4G00R0 HCR2016 -0.0000
XRCGB48M000F0G00R0 HCR2016 -8.0000
XRCGB48M000F4G00R0 HCR2016 -8.0000
100
30
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
50ꢀ (-0ꢀꢁoꢀ+85°C)
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
5
150
150
150
150
150
150
150
150
150
150
150
100
100
100
100
100
100
100
100
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
6
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
300
100
30
100
30
100
30
100
30
30
100
30
100
-5
100
-5
100
-5
*ꢀEquivalenꢁꢀSeriesꢀResisꢁance
23
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Standard Land Pattern Dimensions
XRCHA_F_A
(HCR2520)
XRCGB_F_A/G
(HCR2016)
(Recommended Land Pattern)
0.4
(Recommended Land Pattern)
0.75
0.75
0.60
1.35
(in mm)
(in mm)
3
24
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Units for Automotive-
Notice (Soldering and Mounting)
1.1. Soldering Condition
(1) Reflow
Please mount components on a circuit board by the
reflow soldering.
Flux: Please use rosin based flux; but do not use water
soluble flux.
Solder: Please use solder (Sn-3.0Ag-0.5Cu) under the
following condition.
Standard thickness of soldering paste: 0.10 to 0.15mm
Peak
260
245
220
Heating
(220°C min.)
180
150
Pre-heating
(150 to 180°C)
Gradual
Cooling
Condition
60 to 120 sec.
30 to 60 sec.
Pre-heating
Heating
150 to 180°C
220°C min.
3
60 to 120 sec.
30 to 60 sec.
245°C min. 260°C max. 5 sec. max.
Peak Temperature
(2) Soldering Iron
If compelled to mount the component by using a
soldering iron, please do not directly touch the
component with the soldering iron. The component
terminals or electrical characteristics may be damaged if
excessive thermal stress is applied.
Condition
150°C 60 sec.
350°C max.
30W max.
Pre-heating
Heating of the Soldering Iron
Watt
Shape of the Soldering Iron
Soldering Time
ø3mm max.
5 sec. max.
Solder
Sn-3.0Ag-0.5Cu
1.2. Optimum Solder Amount for Soldering
Please keep the solder volume below the height of the
substrate. When exceeding the substrate, damage of
sealing part between the metal cap and the substrate
may occur.
2. Wash
The component cannot withstand washing.
3. Notice for Mounting
The component is recommended with placement
machines employing optical placement capabilities.
The component might be damaged by mechanical force
depending on placement machine and condition.
Make sure that you have evaluated by using placement
machines before going into mass production.
Do not use placement machines employing mechanical
positioning.
Please contact Murata for details beforehand.
Continued on the following page.
25
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Notice -Crystal Units for Automotive-
Continued from the preceding page.
Notice (Storage and Operating Condition)
1. Product Storage Condition
(2) Please do not put the products directly on the
floor without anything under them to avoid damp
places and/or dusty places.
(3) Please do not store the products in the places under
direct sunlight, heat and vibration.
(4) Please use the products immediately aꢀer the
package is opened, because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to storage under poor
conditions.
(5) Please do not drop the products to avoid cracking
the crystal element.
4. Other
Conformal coating or washing of the component is not
acceptable because it is not hermetically sealed.
Please be sure to consult with our sales representative
or engineer whenever and prior to using the products.
Please store the products in room where the
temperature/humidity is stable. And avoid
such places where there are large temperature
changes. Please store the products under the
following conditions:
Temperature: -10 to + 40 degrees C
Humidity: 15 to 85% R.H.
2. Expire Date on Storage
Expiration date (shelf life) of the products is 6 months
aꢀer delivery under the conditions of an unopened
package. Please use the products within 6 months aꢀer
delivery. If you store the products for a long time (more
than 6 months), use carefully because the products may
be degraded in solderability and/or rusty.
Please confirm solderability and characteristics for the
products regularly.
3
3. Notice on Product Storage
(1) Please do not store the products in a chemical
atmosphere (Acids, Alkali, Bases, Organic gas,
Sulfides and so on), because the characteristics
may be reduced in quality, and/or be degraded in
solderability due to the storage in a
chemical atmosphere.
Notice (Rating)
The component may be damaged if excess mechanical
stress is applied.
Notice (Handling)
1. Irregular or stopped oscillation may occur under
unmatched circuit conditions.
Please design your oscillation circuit to get 5
times or more of a negative resistance against
the maximum value of the Equivalent Series
Resistance, that is specified in order.
2. Be sure to provide an appropriate fail-safe
function on your product to prevent a second
damage that may be caused by the abnormal
function or the failure of our product.
26
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Packaging -Crystal Units for Automotive-
Dimensions of Taping
XRCHA_F_A
(HCR2520)
XRCGB_F_A/G
(HCR2016)
4.0 0.1
4.0 0.1
+0.1
–0.0
+0.1
–0.0
ø1.5
ø1.5
ꢀ.0 0.1
ꢀ.0 0.1
2
ø1.0 0.1
ø1.0 0.1
1.85 0.1
ꢀ.ꢀ5 0.1
4.0 0.1
Cover Film
4.0 0.1
Cover Film
5° max.
(5°)
10°
10°
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Cover film peel strength force 0.1 to 0.7N
Cover film peel speed 300mm/min.
Direction of Feed
Direction of Feed
(in mm)
(in mm)
Minimum Quantity/Dimensions of Reel
Plastic Tape ø180mm
Plastic Tape ø330mm
3,000
9,000
(pcs.)
Trailer
160 to 190
Leader
Cover Film
Empty
Components
Empty
160 min.
400 to 560
ø13.0 0.ꢀ
ꢀ.0 0.5
9.0+1.0
0
13.0 1.0
(in mm)
27
• Please read rating and CAUTION (for storage, operating, rating, soldering, mounting and handling) in this catalog to prevent smoking and/or burning, etc.
!
P79E.pdf
Oct.1,2018
Note
!
• This catalog has only typical specifications. Therefore, please approve our product specifications or transact the approval sheet for product specifications before ordering.
Measuring Circuit of Crystal Units
Measuring Circuit
1. Frequency Measuring Method
The load resonance frequency (Lower frequency of the
two given when the electrical impedance of the
component becomes resistant near its resonance point)
is measured by network analyzer (KEYSIGHT E5100A or
the equivalent) and the circuit in Figure 1. DUT is shown
in Figure 2, and the value of Cs refers to the load
capacitance value in specifications.
Network Analyzer
OUT2
OUT1
R
A
66.2Ω
66.2Ω
DUT
159Ω
14.2Ω
14.2Ω
159Ω
2. Equivalent Series Resistance
The equivalent series resistance (ESR) is measured by
network analyzer (KEYSIGHT E5100A or equivalent) and
the circuit in Figure 1. DUT is shown in Figure 3.
Figure 1 Frequency Measuring Circuit
3. Measuring Condition
Standard conditions for measurement shall be +25 3ꢀC
temperature and humidity of 45 to 85%R.H.
Cs
Figure 2 DUT (Device Under Test)
C1
L1
ESR
Co
Figure 3 DUT (Device Under Test)
28
P79E.pdf
Oct.1,2018
Cat. No. P79E-11
Global Locations
For details please visit www.murata.com
Note
1 Export Control
2 Please contact our sales representatives or
product engineers before using the products in
this catalog for the applications listed below,
which require especially high reliability for the
prevention of defects which might directly
damage a third party’s life, body or property, or
when one of our products is intended for use
in applications other than those specified in
this catalog.
3 Product specifications in this catalog are as of
October 2018. They are subject to change or
our products in it may be discontinued without
advance notice. Please check with our sales
representatives or product engineers before
ordering. If there are any questions, please contact
our sales representatives or product engineers.
For customers outside Japan:
No Murata products should be used or
sold, through any channels, for use in the
design, development, production, utilization,
maintenance or operation of, or otherwise
contribution to (1) any weapons (Weapons of
Mass Destruction [nuclear, chemical or biological
weapons or missiles] or conventional weapons)
or (2) goods or systems specially designed or
intended for military end-use or utilization by
military end-users.
4 Please read rating and CAUTION (for storage,
operating, rating, soldering, mounting and
handling) in this catalog to prevent smoking
and/or burning, etc.
1
2
3
4
5
6
Aircraf equipment
Aerospace equipment
Undersea equipment
Power plant equipment
Medical equipment
5 This catalog has only typical specifications.
Therefore, please approve our product
specifications or transact the approval sheet
for product specifications before ordering.
For customers in Japan:
For products which are controlled items subject
to the “Foreign Exchange and Foreign Trade Law”
of Japan, the export license specified by the law
is required for export.
6 Please note that unless otherwise specified, we
shall assume no responsibility whatsoever for any
conflict or dispute that may occur in connection
with the effect of our and/or a third party’s
intellectual property rights and other related
rights in consideration of your use of our products
and/or information described or contained in our
catalogs. In this connection, no representation
shall be made to the effect that any third parties
are authorized to use the rights mentioned above
under licenses without our consent.
Transportation equipment (vehicles, trains,
ships, etc.)
7
8
Traffic signal equipment
Disaster prevention / crime prevention
equipment
9
Data-processing equipment
10 Application oꢀ similar complexity and/or
reliability requirements to the applications
listed above
7 No ozone depleting substances (ODS) under the
Montreal Protocol are used in our manufacturing
process.
Murata Manufacturing Co., Ltd.
www.murata.com
相关型号：
©2020 ICPDF网 联系我们和版权申明