ARX1112 [NAIS]

SMALL MICRO WAVE RELAY; 小微波继电器


型号：	ARX1112
厂家：	NAIS(MATSUSHITA ELECTRIC WORKS)
描述：	SMALL MICRO WAVE RELAY 小微波继电器继电器微波
文件：	总3页 (文件大小：87K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

SMALL MICRO WAVE RELAY

RX-RELAYS

• Insertion loss

12.4

.488

• V.S.W.R./ Return loss: 1.2dB or less/

20.8dB or more

2. High sensitivity

20.5

.807

COM-NC

9.4

.370

0.1

• Nominal operating power: 200 mW

3. Small size

0.2

COM-NO

• Size: 20.5(L) × 12.4(W) × 9.4(H) mm

.807(L) × .488(W) × .370(H) inch

mm inch

0.3

0.4

1. Excellent high frequency character-

istics (~2.5GHz, Impedance 50Ω)

• Insertion loss: 0.2 dB or less

*Also available for unit support (contact us

for more details).

0.5

300kHz

1.5GHz

Frequency

2.5GHz3GHz

• Isolation: 60 dB or more

SPECIFICATIONS

Contact

Characteristics

Initial insulation resistance*¹

Min. 100 MΩ (at 500 V DC)

500 Vrms

Arrangement

1 Form C

Gold

Contact material

Initial contact resistance

Between open contacts

Initial

Max. 100 mΩ

Between contact and coil

1,000 Vrms

breakdown

voltage*²

10W (2.5 GHz, Impedance

50 Ω, V.S.W.R. 1.2)

10mA 24V DC(resistive load)

Between contact and

earth terminal

500 Vrms

Contact rating

Max. 10ms (Approx. 6ms)

[Max. 10ms (Approx. 5ms)]

Operate time [Set time]*³(at 20°C)

Max. 20W(at 40°C,

V.S.W.R. 1.2, Average)

Rating

Contact carrying power

Max. 6ms (Approx. 3ms)

[Max. 10ms (Approx. 5ms)]

Release time (without diode) [Reset time]*³

Max. switching voltage

Max. switching current

Isolation

30 V DC

0.5 A DC

Temperature rise (at 20°C)*⁴

Max. 60°C

Functional*⁵

Destructive*⁶

Min. 200 m/s²{20 G}

Min. 1,000 m/s²{100 G}

Min. 60 dB

Shock resistance

High frequency

characteristics

(~2.5GHz,

Insertion loss

Max. 0.2 dB

V.S.W.R.(Return loss)

Max. 1.2 (Min. 20.8dB)

10 to 55 Hz

at double amplitude of 3 mm

Functional*⁷

Vibration

resistance

Destructive

Impedance 50Ω)

Max. 20W (at 40°C,

V.S.W.R. 1.2,Average)

Input power

10 to 55 Hz

at double amplitude of 5 mm

5×10⁶

Mechanical (at 180 cpm)

–40°C to 60°C

–40°F to 140°F

Conditions for operation,

Ambient temp.

10mA 24 V DC

(resistive load)

3×10⁵

transport and storage*⁸

Expected

life (min.

operations)

(Not freezing and condensing

Electrical

10W 2.5 GHz,

Impedance 50Ω

Humidity

5 to 85% R.H.

at low temperature)

10⁵

Approx. 5 g .18 oz

Unit weight

Coil (at 20°C, 68°F)

Remarks

* Specifications will vary with foreign standards certification ratings.

*¹Measurement at same location as “Initial breakdown voltage” section.

*²Detection current: 10mA

Nominal operating power

200 mW

Single side stable

1 coil latching

2 coil latching

*³Nominal operating voltage applied to the coil, excluding contact bounce time.

*⁴By resistive method, nominal voltage applied to the coil: Contact carrying power:

200 mW

400 mW

20W, at 2.5GHz, Impedance 50Ω, V.S.W.R. 1.2

*⁵Half-wave pulse of sine wave: 11ms, detection time: 10µs.

*⁶Half-wave pulse of sine wave: 6ms

*⁷Detection time: 10µs

*⁸Refer to 5. Conditions for operation, transport and storage mentioned in

AMBIENT ENVIRONMENT (Page 61)

TYPICAL APPLICATIONS ORDERING INFORMATION

• Cellular phone base station (W-CDMA,

Ex.

FPLMTS, IMT-2000, PCS, DCS)

• Cellular phone-related measurement

devices (SP3T/SP4T switches, etc)

• Wireless LAN

Product name

Contact arrangement

1: 1 Form C

Operating function

Coil voltage, V DC

03: 3 09: 9

4H: 4.5 12: 12

06: 6 24: 24

0: Single side stable

1: 1 coil latching

2: 2 coil latching

• Wireless Local Loop

Note: Standard packing; Carton: 50 pcs. Case 500 pcs.

TYPES ANE COIL DATA (at 20°C 68°F)

• Single side stable type

Nominal

voltage,

V DC

Pick-up

voltage, V DC

(max.)(initial)

2.25

Drop-out

voltage, V DC

(min.)(initial)

0.3

Nominal

Coil resistance,

Max. allowable

voltage, V DC

Part No.

operating current, operating power,

Ω (±10%)

mA (±10%)

66.7

200

ARX1003

ARX104H

ARX1006

ARX1009

ARX1012

ARX1024

101

3.3

4.95

6.6

9.9

13.2

26.4

4.5

3.375

4.5

6.75

0.45

0.6

0.9

1.2

2.4

44.4

180

405

720

2,880

33.3

22.2

16.7

8.3

• 1 coil latching type

Nominal

Set

Reset

voltage, V DC

(max.)(initial)

2.25

Nominal

Coil resistance,

Max. allowable

voltage, V DC

Part No.

voltage,

V DC

4.5

voltage, V DC

(max.)(initial)

2.25

operating current, operating power,

Ω (±10%)

mA (±10%)

200

ARX1103

ARX114H

ARX1106

ARX1109

ARX1112

ARX1124

101

66.7

44.4

3.3

4.95

6.6

9.9

13.2

26.4

3.375

4.5

6.75

3.375

4.5

6.75

180

405

720

2,880

33.3

22.2

16.7

8.3

• 2 coil latching type

Nominal

Set

Reset

voltage, V DC

(max.)(initial)

2.25

Nominal

Coil resistance,

Max. allowable

voltage, V DC

Part No.

voltage,

V DC

4.5

voltage, V DC

(max.)(initial)

2.25

operating current, operating power,

Ω (±10%)

mA (±10%)

133.3

88.9

400

ARX1203

ARX124H

ARX1206

ARX1209

ARX1212

ARX1224

22.5

50.6

3.3

4.95

6.6

9.9

13.2

26.4

3.375

4.5

6.75

3.375

4.5

6.75

202.5

360

66.7

44.4

33.3

16.7

1,440

mm inch

DIMENSIONS

PC board pattern (Bottom view)

20.5

.807

12.4

.488

0.9 dia hole

.035 dia hole

(2 coil latching type only)

2.54

.100

9.2

.362

7.62

.300

0.2

.008

3.0

.118

2.63

.104

2.54

.100

(2.04)

(.080)

7.62

.300

(2.74)

(.108)

0.90

.035

2-0.6×0.3

2-.024×.012

Tolerance: ±0.1 ±.004

General tolerance: ±0.3 ±.012

Solder to the PC board earth.

Schematic (Bottom view)

1 coil latching 2 coil latching

7-0.40 to 0.45 dia.

7-.016 to .018 dia.

Single side stable

14 13

12 11 10

COM

14 13 12 11 10

14 13 12 11 10 9

RESET

SET

COM

RESET

COM

SET

(Deenergized condition) (Reset condition)

(Reset condition)

REFERENCE DATA

1. High frequency characteristics

Sample: ARX1012

Measuring method: Measured with HP network analyzer (HP8753C).

The details for the high freqency characteristics and the measurement

procedures and conditions are listed in the RX relay test report.

• Insertion loss

• Isolation

• V.S.W.R. (Return loss)

5.0

COM-NC

COM-NO

2.0

1.5

0.1

0.2

COM-NO

COM-NC

1.2

1.1

COM-NC

0.3

0.4

COM-NO

100

300kHz

0.5

300kHz

1.5GHz

Frequency

2.5GHz 3GHz

1.5GHz

Frequency

2.5GHz3GHz

1.5GHz

2.5GHz 3GHz

Frequency

NOTES

1. Coil operating power

4. Cleaning

Pure DC current should be applied to the

coil. The wave form should be rectangu-

lar. lf it includes ripple, the ripple factor

should be less than 5%.

However, check it with the actual circuit

since the characteristics may be slightly

different. The nominal operating voltage

should be applied to the coil for more

than 30 ms to set/reset the latching type

relay.

For automatic cleaning, the boiling meth-

od is recommended. Avoid ultrasonic

cleaning which subjects the relays to high

frequency vibrations, which may cause

the contacts to stick.

lt is recommended that a fluorinated hy-

drocarbon or other alcoholic solvents be

used.

5. Soldering

The soldering shall be performed under

following condition.

2. Coil connection

When connecting coils, refer to the wiring

diagram to prevent mis-operation or mal-

function.

Max. 260°C 500°F 10s

Max. 350°C 662°F 3s

In addition, when soldering the case to

the PC board, the plating may swell

depending on the soldering conditions.

3. External magnetic field

Since RX relays are highly sensitive po-

larized relays, their characteristics will be

affected by a strong external magnetic

field. Avoid using the relay under that

condition.

For Cautions for Use, see Relay Technical Information (Page 48 to 76).

9/1/2000

Go To Online Catalog

相关型号：