ASL510C801NP0LF [NEC]
Multilayer Piezoelectric Actuators; 多层压电致动器型号: | ASL510C801NP0LF |
厂家: | NEC |
描述: | Multilayer Piezoelectric Actuators |
文件: | 总27页 (文件大小:1850K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
PRECAUTIONS TO BE TAKEN WHEN USING MULTILAYER
PIEZOELECTRIC ACTUATORS
(Please read these precautions before using our products)
1. Before using our products or designing a system using our products, read
the precautions and specifications(such as level of quality)for the products
you intend to use on the last page of this manual.
2. The main failures with multilayer piezoelectric actuators are deterioration of
insulation resistance, short-circuit, and open-circuit.
Before using the products, design systems carefully to ensure redundancy,
prevention of the spread of fire, and prevention of faulty operation allowing
for the occurrence of failures.
3. Use the products after checking the working conditions and rated performance
of each of the multilayer piezoelectric actuator series.
Selection of AE series(a resin-coated type)or ASB, ASL and AHB series(a
metal-sealed type)should be based on the intended working temperature
and humidity.
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
CONTENTS
Resin coated type multilayer piezoelectric acutuators AE series............................
5
Metal sealed type multilayer piezoelectric actuators ................................................. 11
ASB series(85℃ rated), ASL series(150℃ rated),
AHB series(High displacement model)
Reliability ................................................................................................................. 19
Guide to use ............................................................................................................ 21
Precautions ............................................................................................................. 23
Multilayer Piezoelectric Actuators Vol.06
3
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
NEC TOKINʼs multilayer piezoelectric actuators are available in four series.
Resin-coated type
General-purpose
Metal case type
High-performance
General-purpose
85℃ rated
ASB series
150℃ rated
85℃ rated
ASL series
AE series
High displacement
model
AHB series
*AE series is resin-coated products. Therefore we recommend using metal case type, ASB,
ASL and AHB series in high humidity condition.
NEC TOKINʼs multilayer piezoelectric actuators are designed using unique
element structure technology and using ceramic materials with high
electrostrictive factors developed by NEC TOKIN.
*For detail information of piezoelectric ceramic material, please refer to a catalogue of “Piezoelectric ceramics”.
Features
□ Special ceramics developed by NEC TOKIN are used in piezoelectric ceramic elements.
□ As compared with conventional actuator elements, NEC TOKINʼs multilayer piezoelectric actuators have
advantages as follows.
■ Advantages over electromagnetic actuators
⃝ Faster response
⃝ High resolution for positioning
Insulator
⃝ Large generated force
⃝ Low power consumption
⃝ No electromagnetic noise
Internal
electrode
■ Advantages over bimorph piezoelectric actuators
⃝ High energy conversion efficiency(around 7 times the
energy conversion efficiency of the bimorph type
actuator), and low power consumption
External
electrode
⃝ Large generated force
⃝
Stable displacement, and reduced shift and creep phenomena
⃝ Response speed(more than 100 times the response
speed of the bimorph piezoelectric actuator)
■ Advantages over stacked piezoelectric actuators
⃝ Compact size(less than 1/10 the specific volume of
the stacked piezoelectric actuator)
Ceramic
⃝ Low drive voltage, and ease of use
Structure of NEC TOKINʼs Multilayer
⃝ Inexpensive
Piezoelectric Actuato
4
Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Resin coated type multilayer piezoelectric actuators
AE Series
Outline
Multilayer piezoelectric actuators are ceramic elements
for converting electrical energy into mechanical energy
such as displacement or force by utilizing the
piezoelectric longitudinal effect.
NEC TOKIN's multilayer piezoelectric actuators are
produced based on our unique element structure
design and using originally developed piezoelectric
ceramic materials with high electrostrictive factors.
Compared to conventional piezoelectric actuators,
they are smaller in size but can generate higher
displacement and force at low voltages.
Especially, the resin-coated AE series actuators
feature compact size and wide variety in shape for
applications such as ultra-fine positioning mechanisms
Features
⃝ Large generated force: 3,500 N/cm2(typ.)
and drive sources.
⃝ High-speed response: Driving up to about 1/3 of self-
resonant frequency(in several ten kHz)is possible.
Applications
⃝ Accurate positioning: Controllable in nm order.
Auto focusing of cell phone camera, Image stabilization
of DSC, Positioning, Motors, Pumps, Valves, Vibration
source, Vibration controls, Sensors, Mirror / Prism
positioning, Manipulators, AFM, Printer, etc
⃝ Low power consumption: Can be retained at the
leakage current state(100μA or less).
⃝Very small size: 1/10 or smaller than conventional
multilayer actuators(specific volume)
Numbering system
Example: AE 0505 D16 XXX F
Comply with RoHS
*Compliant to RoHS directive in effect
as of April, 2011
Additional code(optional) Example:H40=Overall length is 40mm
D=Thin coating type
Nominal displacement:
Ceramic cross section:
Series name:
Indicated by two digits in micrometer[s μm]
in succession to D
Example: D16=16μm
Unit: Millimeter[s mm]
Example: 0505=5 mm×5 mm
*Coating area is not include.
AE=Resin-coated type
Multilayer Piezoelectric Actuators Vol.06
5
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Standard Parts List
Displacement[μm]
Resonance
frequency
[kHz]
Insulation
resistance
[MΩ]
Overall length Generated force
Stiffness
[N/um]
Capacitance
[μF]
Maximum
Model
[mm]
[N]
driving voltage
[150VDC]
AE0203D04F
4.6±1.5
5
200
200
43.5
22.0
11.5
4.8
261
138
69
0.09
0.18
0.35
0.82
0.75
1.4
100
100
50
20
50
10
5
AE0203D04DF
AE0203D08F
9.1±1.5
10
20
40
10
20
40
20
40
AE0203D08DF
AE0203D16F
17.4±2.0
200
AE0203D16DF
AE0203D44H40F
42.0±6.6
200
34
AE0203D44H40DF
AE0505D08F
9.1±1.5
850
93.4
48.9
20.2
190.2
83.3
138
69
AE0505D08DF
AE0505D16F
17.4±2.0
850
AE0505D16DF
AE0505D44H40F
42.0±6.6
850
34
3.4
AE0505D44H40DF
AE1010D16F
18.4±3.5
3,500
3,500
69
5.4
5
AE1010D16DF
AE1010D44H40F
42.0±6.6
34
13.6
2
AE1010D44H40DF
AE1414D16F
AE2525D15F
18.4±3.5
15.6±2.0
20
20
7,000
380.4
69
69
10.8
30.5
2
20,000
1,282.0
0.4
*Tow coating types are available. AE****D**DF has thinner coating thickness.
*For detail information of measurement conditions and outer dimension, please refer to “Performance” and “Outer Dimension” sections.
Performance
Item
Standard
Conditions
When applied with a DC voltage: Ambient temperature
Operating temperature range
ー25 to +85℃
When driven by an AC voltage: Ambient temperature + Temperature
rise due to generated heat
Recommend storage at room temperature.
No condensation.
Recommended Storage
condition
ー5 to +40℃ / less than 40%R.H
Maximum driving voltage
Displacement
150VDC
See the standard parts list
At 150VDC
The force required for restricting the displacement to 0 when the
maximum driving voltage is applied.
Generated force
(compression resistance)
See the standard parts list
Capacitance
See the standard parts list
+/ー20 %
Capacitance allowance
Dissipation factor
Insulation resistance
f=1kHz, V=1Vrms
5% or less
See the standard parts list
Value obtained in 1 minute at 150 VDC
With both ends of element in free state
Resonance frequency
See the standard parts list
Typical value of the element under our test conditions
Tensile strength
Young's modulus
1/10 of generated force
Typical value of the element under our test conditions
Typical value of the element under our test conditions
4.4×1010N/m2
Displacement: Initial value ±20%
Capacitance: Initial value ±30%
tanδ: Less than initial rated value
Insulation resistance: 1MΩ or more
Appearance: No noticeable defect
Room temperature(3 min)
–25℃(30 min.)
Room temperature(3 min)
+85℃(30 min)
Temperature cycle test
Repetition of 10 cycles of the above
6
Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Outer Dimensions
Overall length 5,10 and 20mm Products
Overall length 40mm Product
(+)
(-)
(+)
(-)
W1
W2
T1
T2
Note:
Factory-shipped polarization : Red lead wire=(+),
White lead wire =(-)
Above drawings do not include dimension of wire
connection area and diameter of the wire. Please contact
us for details.
W1
W2
T1
T2
Unit:mm
Model
T1
W1
H
T2
W2
L
AE0203D04F
3.5Max.
2.4Max.
3.5Max.
2.4Max.
3.5Max.
2.4Max.
3.5Max.
2.4Max.
6.5Max.
5.4Max.
6.5Max.
5.4Max.
6.5Max.
5.4Max.
11.5Max.
10.4Max.
11.5Max.
10.4Max.
15.7Max.
26.6Max.
4.5Max.
3.4Max.
4.5Max.
3.4Max.
4.5Max.
3.4Max.
4.5Max.
3.4Max.
6.5Max.
5.4Max.
6.5Max.
5.4Max.
6.5Max.
5.4Max.
11.5Max.
10.4Max.
11.5Max.
10.4Max.
15.7Max.
26.6Max.
2±0.1
3±0.1
5±0.1
10±0.1
20±0.1
40±0.1
10±0.1
20±0.1
40±0.1
20±0.1
40±0.1
100
AE0203D04DF
AE0203D08F
2±0.1
2±0.1
2±0.1
5±0.1
5±0.1
5±0.1
10±0.1
10±0.1
3±0.1
3±0.1
3±0.1
5±0.1
5±0.1
5±0.1
10±0.1
10±0.1
100
100
100
100
100
100
100
100
AE0203D08DF
AE0203D16F
AE0203D16DF
AE0203D44H40F
AE0203D44H40DF
AE0505D08F
AE0505D08DF
AE0505D16F
AE0505D16DF
AE0505D44H40F
AE0505D44H40DF
AE1010D16F
AE1010D16DF
AE1010D44H40F
AE1010D44H40DF
AE1414D16F
14.2±0.1
25.1±0.1
14.2±0.1
25.1±0.1
20±0.1
20±0.1
100
100
AE2525D15F
*L=Length of lead wire
Multilayer Piezoelectric Actuators Vol.06
7
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Unit:mm
Wire diameter
UL
number
Model Number
φd
φD
L
AWG
L
AE0203D04F
0.3
0.5
100
32
1993
1993
1993
1993
1993
1371
1371
1371
1371
AE0203D04DF
AE0203D08F
0.3
0.3
0.3
0.3
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.5
0.8
0.8
0.8
0.8
100
100
100
100
100
100
100
100
32
32
32
32
26
26
26
26
AE0203D08DF
AE0203D16F
φd =Diameter of lead wire
φD =Outer diameter including the thickness of coating
AE0203D16DF
AE0203D44H40F
AE0203D44H40DF
AE0505D08F
L =Length of lead wire
Lead wire: Copper wire with Tin plating
Coating: PTFE(Polytetrafluoroethylene)
AE0505D08DF
AE0505D16F
AE0505D16DF
AE0505D44H40F
AE0505D44H40DF
AE1010D16F
AE1010D16DF
AE1010D44H40F
AE1010D44H40DF
AE1414D16F
0.5
0.5
0.8
0.8
100
100
26
26
1371
1371
AE2525D15F
Special Design Parts
Non-standard parts are available per order basis.
Please use the guideline below as reference regarding
generated displacement and generated force.
Displacement: Roughly proportional to the
element length
Generated force: Roughly proportional to the
sectional area of the element
Shape: Product cross-section: 1mm×1mm square
or larger
Product length: 1mm or longer
Can be provided in cylindrical ring or
other shapes.
Please contact us for further details.
Example of special design parts
AL1.65×1.65×5DF
1.65×1.65×5mm
±10V
AE1.65×1.65×5DF
Condition
Ceramic Dimension
Maximum Operating Voltage(V)
Displacement
1.65×1.65×5mm
150VDC
(300nmp-p
)
(4μm)
43
At maximum operating voltage
f=1kHz, V=1Vrms
Small size piezo actuator
Capacitance(nF)
90
Operating Temperature
-25~+85℃
8
Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Characteristic Data
Fig-1 Voltage vs. Displacement
Fig-2 Generated force vs. Displacement of
AE0505D16F in Driving voltage
50
40
30
20
10
0
20
18
16
14
12
10
8
150V
AE0505D44H40
100V
50V
AE0505D16
Generated force
6
AE0505D08
4
AE0203D04
150
2
0
0
50
100
0
200
400
600
800
1000
Voltage(V)
Generated force(N)
Fig-3 Generated force vs. Displacement-1
Fig-4 Generated force vs. Displacement-2
50
40
30
20
10
0
50
40
30
20
10
0
Driving voltage: 150VDC
Driving voltage: 150VDC
A
①:AE0203D04F
②:AE0203D08F
③:AE0203D16F
④:AE1010D16F
⑤:AE1414D16F
E
1
0
1
0
D
4
4
H
4
0
F
A
E
2
5
③
2
5
D
1
5
F
④
⑤
②
①
0
200
400
600
800
1000
0
10000
Generated force(N)
20000
Generated force(N)
Fig-5 Temperature vs. Displacement
60
50
40
30
20
10
0
Driving voltage: 150VDC
AE0505D44H40
AE0505D16
AE0505D08
AE0203D04
-40
-20
0
20
40
60
80
100
Temperature(℃)
* Listed data are reference values. For the voltage vs. displacement characteristic, the same length of piezo series shows the same voltage vs. displacement
characteristic.
* Definition of generated force for Fig-2, Fig-3 and Fig-4;
Force is the force required for restricting the displacement to 0 when the maximum driving voltage is applied.
Multilayer Piezoelectric Actuators Vol.06
9
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Fig-6 Temperature vs. Displacement
Fig-7 Voltage vs. Displacement in time
50
40
30
20
10
0
⊿L150
20
15
10
5
Ambient Temperature:23℃
Model:AE0505D16F
AE0505D16
(5×5×20mm)
⊿L150-⊿L0
0
30
⊿L0
-5
0
75
150
Voltage(V)
⊿L150-⊿L0
20
⊿L150
10
0
⊿L0
160
140
120
100
80
-10
-20
Voltage
-40
-20
0
20
40
60
80
100
Temperature(℃)
60
40
20
0
-20
-20
0
20
40
60
80
100
Time(sec)
Fig-8 Heat generation vs. Drive frequency-1
Fig-9 Heat generation vs. Drive frequency-2
Model: AE0505D16F
Driving signal waveform: Sine wave (150Vp-p)
Temperature measurement:5 minutes later from operation
Model:AE0505D16F
1 kHz
100
80
Peak voltage
40 V
DC bias
20 V
Symbol
80
70
60
50
40
30
20
10
100 V
150 V
50 V
500 Hz
75 V
60
40
20
200 Hz
10
100
1000
Driving frequency(Hz)
100 Hz
50 Hz
0
100
200
Time(sec)
300
10 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Metal sealed type multilayer piezoelectric actuators
ASB Series(85˚C rated), ASL series(150˚C rated), AHB series(High
displacement model)
Outline
Multilayer piezoelectric actuators convert electrical energy
into mechanical energy such as displacement or force
by making use of the piezoelectric longitudinal effect.
NEC TOKINʼs multilayer piezoelectric actuators are
produced based on our unique element structure design
by making use of originally developed piezoelectric
ceramic materials with high electrostrictive factors.
Compared to conventional piezoelectric actuators,
they are smaller in size but can generate higher
displacements and forces at low voltages.
Especially, the metal sealed ASB/ASL and AHB
series actuators are much less influenced by ambient
humidity because of insulation from the atmosphere.
As a result, long service life and high performance
never experienced in the past have been attained to
Features
allow use in various applications such as semiconductor
⃝ High reliability: Realization of MTTF=36,000 hours
device production equipment and optical communication
equipment which require high reliability.
(at 85℃ and 100 V)
⃝
Easier installation into equipments thanks to the built-in
pre-load mechanism and mounting attachment
⃝ Minimum mechanical abrasion
Applications
⃝ Large generated force: 800 N
⃝Accurate positioning: Controllable in nm order
Fine adjustment of various X-Y tables steppers,
Mirror/prism positioning, Linear motors, Fluid flow
control valve drive, Vibration source, Manipulators,
etc.
Numbering system
Example: AS B 170 C 801 N P 0 LF
Comply with RoHS
*Compliant to RoHS directive in effect as of April 2011
Sequentially numbered starting from 0
New design No.
Configuration of drive block
Configuration of mount
P=Plane, D=V groove(Refer to page 14 for detail.)
N=Female thread type
F=Flange type(refer to page 12 for details)
W=Without a flange
Generated force
Unit: Newton[N]
The first two digits are effective numerals.
The last digit is an exponent of 10.
Example: 801=800 N=80 kgf
Maximum drive voltage
Nominal displacement
C=150 VDC
Unit: Micrometers(μm)
The first two digits are effective numerals.
The last digit is an exponent of 10.
Example: 170=17μm
Construction of housing and
operating temperature range L=Bellows(pre-load), maximum operating temperature: 150℃
B=Bellows(pre-load), maximum operating temperature: 85℃
Series name
AS=Encapsulated in metal case
AHEncapsulated in metal caseHigh displacement model
Multilayer Piezoelectric Actuators Vol.06 11
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Standard Parts List
◦ASB series
Displacemen[t μm]
Resonance
frequency
[kHz]
Insulation
resistance
[MΩ]
Generated force
Capacitance
[μF]
Model
Maximum driving voltage
[N]
[150VDC]
ASB170C801■●0LF
ASB170C801W●1-A0LF
ASB340C801■●0LF
ASB340C801W●1-A0LF
ASB510C801■●0LF
ASB510C801W●1-A0LF
ASB680C801■●0LF
ASB680C801W●1-A0LF
ASB170C201WP1-A0LF
17.0±3
34.0±6
51.0±9
800
800
800
14
12
10
1.5
3.0
4.5
30
15
10
68.0±12
20.0±3
800
200
8
6.0
0.5
5
37
100
*Note: ■ in model number has “N” or “F” letter.
● in model number has “P” or “D” letter.
Example)ASB170C801NP0LF, ASB510C801WD1-A0LF
*Model number, ASB***C801W●1-A1LF is the model without a flange.
*For detail information of measurement conditions and outer dimension, please refer to “Performance” and “Outer Dimension” sections.
◦ASL series
Displacemen[t μm]
Resonance
frequency
[kHz]
Insulation
resistance
[MΩ]
Generated force
Capacitance
[μF]
Model
Maximum driving voltage
[N]
[150VDC]
ASL170C801■●0LF
ASL340C801■●0LF
ASL510C801■●0LF
ASL680C801■●0LF
19.0±3
39.0±6
58.0±9
77.0±12
800
800
800
800
14
12
10
8
1.34
2.55
3.84
5.07
30
15
10
5
*Note: ■ in model number has “N” or “F” letter.
● in model number has “P” or “D” letter.
Example)ASL170C801FP0LF
*No flange type is also available for ASL-series. Please contact us for detail.
◦AHB series
Displacemen[t μm]
Resonance
frequency
[kHz]
Insulation
resistance
[MΩ]
Generated force
Capacitance
[μF]
Model
Maximum driving voltage
[N]
[150VDC]
AHB550C801■●0LF
AHB700C801■●0LF
AHB800C801■●0LF
AHB800C302WD1-A0LF
55.0±8
70.0±15
80.0±15
80.0±15
800
800
12
8
6.4
8.2
10
5
800
8
9.3
5
3000
8
37.0
2
*Note: ■ in model number has “N” or “F” letter.
● in model number has “P” or “D” letter.
Example)AHB800C801NP0LF
*No flange type is also available for AHB-series. Please contact us for detail.
*For detail information of measurement conditions and outer dimension, please refer to “Performance” and “Outer Dimension” sections.
Flange type
No flange type
Product appearance example
12 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Performance
Item
Standard
Conditions
When applied with DC voltage: Ambient temperature
When driven by pulse: Ambient temperature + Temperature rise due
to generated heat
ASB/AHB : ー25 to +85℃
ASL : ー40 to +150℃
Operating temperature range
Recommended Storage
condition
ー5 to +40℃
Maximum driving voltage
Displacement
150VDC
See the standard parts list
At 150VDC
The force required for restricting the displacement to 0 when the
maximum driving voltage is applied.
Generated force
(compression resistance)
See the standard parts list
Capacitance
See the standard parts list
+/ー20%
Capacitance tolerance
Dissipation factor
Insulation resistance
f=1kHz, V=1Vrms
5% or less
See the standard parts list
Value obtained in 1 minute at 150 VDC
With both ends of element in free state
Resonance frequency
Airtightness
See the standard parts list
Typical value of the element under our test conditions
1×10ー8 atm cc/sec or less
ASB, AHB
Room temperature(3 min) Room temperature(3 min)
-25℃(30 min) -40℃(30 min)
Room temperature(3 min) Room temperature(3 min)
+85℃(30 min) +150℃(30 min)
ASL
Displacement: Initial value ±30%
Capacitance: Initial value ±30%
tanδ: Less than initial rated value
Insulation resistance: 1 MΩ or more
Appearance: No noticeable defect
Temperature cycle test
High-temperature shelf test
Solvent resistance test
Repetition of 10 cycles of the above
Displacement: Initial value ±30%
Capacitance: Initial value ±30%
tanδ: Less than initial rated value
Insulation resistance: 1 MΩ or more
Appearance: No noticeable defect
Temperature ASB, AHB: 85±2℃
ASL: 150±2℃
Time
1,000±48 h
Displacement: Initial value ±30%
Capacitance: Initial value ±30%
tanδ: Less than initial rated value
Insulation resistance: 1 MΩ or more
Appearance: No noticeable defect
Mark: Easily legible
Solvent: Isopropyl alcohol
Temperature: 23±5℃
Time: Immersion for 1 min
Displacement: Initial value ±30%
Capacitance: Initial value ±30%
tanδ: Less than initial rated value
Insulation resistance: 1 MΩ or more
Appearance: No noticeable defect
Mark: Easily legible
Temperature: 150±3℃
Time: 96±4 h
Heat resistance test
Multilayer Piezoelectric Actuators Vol.06 13
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Dimensions(Common to ASB, ASL and AHB Series)
●Female thread type
TOP VIEW
17
Enlarged of section A
Model
L(mm)
P type
D type
ASB170C801NP0LF
ASL170C801NP0LF
ASB340C801NP0LF
ASL340C801NP0LF
ASB510C801NP0LF
ASL510C801NP0LF
ASB680C801NP0LF
ASL680C801NP0LF
38.4
φ2.2
58.4
78.4
98.4
φ11.5±0.5
Section A
90°
L±0.5
Model
L(mm)
58.4
2.5±0.2
130±10
AHB550C801NP0LF
AHB700C801NP0LF
AHB800C801NP0LF
2
78.4
19±0.5
9±0.2
78.4
[mm]
*Both P type and D type have the same
overall lengths
φ19.6±0.5
17
*Lead wire: AWG26, UL1371
Red color:(+)
White color:(-)
M4 screw of min. 3 deep
Prepared hole of max. 5 deep
BOTTOM VIEW
●Flange type
Enlarged of section A
P type
TOP VIEW
Model
L(mm)
17
ASB170C801FP0LF
ASL170C801FP0LF
ASB340C801FP0LF
ASL340C801FP0LF
ASB510C801FP0LF
ASL510C801FP0LF
ASB680C801FP0LF
ASL680C801FP0LF
32.4
φ2.2
52.4
72.4
92.4
D type
4-
φ
3.5
φ11.5±0.5
Section A
t
n
e
90°
m
e
c
a
l
p
s
i
d
f
o
n
o
Model
L(mm)
52.4
i
t
L±0.5
c
e
r
i
AHB550C801FP0LF
AHB700C801FP0LF
AHB800C801FP0LF
D
130±10
2.5±0.2
3.0±0.2
72.4
2
72.4
[mm]
13.0±0.5
*Both P type and D type have the same
overall lengths
P.C.D.28
45°
45°
*Lead wire: AWG26, UL1371
Red color:(+)
White color(: -)
φ35±0.5
BOTTOM VIEW
14 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
●Without flange type
TOP VIEW
Enlarged of section A
Model
L(mm)
P type
D type
ASB170C801W●1-A0LF
ASL170C801W●1-A0LF
ASB340C801W●1-A0LF
ASL340C801W●1-A0LF
ASB510C801W●1-A0LF
ASL510C801W●1-A0LF
ASB680C801W●1-A0LF
ASL680C801W●1-A0LF
24.4
φ2.2
44.4
64.4
84.4
φ11.5±0.5
Section A
90°
Model
L(mm)
44.4
AHB550C801W●1-A0LF
AHB700C801W●1-A0LF
AHB800C801W●1-A0LF
64.4
64.4
*Note:
●
in model number has “P” or “D” letter.
Example)AHB800C801NP0LF.
*Lead wire: AWG26, UL1371
Red color:(+)
[mm]
White color:(-)
7.2±0.2
BOTTOM VIEW
●ASB170C201WP1-A0LF
●AHB800C302WD1-A0LF
TOP VIEW
TOP VIEW
φ3.6±0.1
90°
CO.5
MAX6.5
φ20.0±0.3
5.9±0.1
Section A
Enlarged of section A
φ20.0±0.3
*Lead wire: AWG32, UL1993
MAX8.2
Red color:(+)
White color:(-)
CO. 2±0.1
Lead wire (L=100)
Lead wire (L=100)
Lead wire
+0
6.6
-0.1
Lead wire
*Lead wire: AWG26, UL1371
Red color:(+)
(0.8)
(0.5)
White color:(-)
(0.5)
(0.3)
[mm]
[mm]
12.7±0.1
BOTTOM VIEW
Multilayer Piezoelectric Actuators Vol.06 15
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Example of fixing method for without flange type
Metal sealed actuator (Without flange type)
The base of the actuator should be settled to pedestal.
Keep caution on the electrical insulation for the lead wire.
Lead wire
Characteristic Data
◦ASB series
Fig-12 Drive frequency vs. Displacement
Fig-11 Compression load vs. Displacement
Fig-10 Voltage vs. Displacement
60
50
40
30
70
70
Crest value of voltage
150V (SIN waveform)
DC bias : 75V
ASB680C801*P0
ASB510C801*P0
60
60
Applied voltage 150VDC
50
50
40
30
20
ASB510C801
*P0
40
30
20
10
ASB340C801*P0
ASB170C801*P0
ASB340C801*P0
ASB170C801*P0
20
10
0
10
0
10
100
1000
50
100
150
0
200
400
600
800
Generated force(N)
Drive frequency(Hz)
DC voltage(V)
Fig-15 Temperature vs. Insulation resistance
Fig-14 DC bias vs. Capacitance
Fig-13 Temperature vs. Displacement
Measured voltage : 150VDC
1010
6
60
Measured frequency : 1kHz
Applied voltage 150VDC
5
50
40
30
20
ASB170C801*P0
109
108
107
ASB510C801*P0
ASB340C801*P0
4
3
ASB510C801*P0
ASB340C801*P0
ASB510C801*P0
2
1
ASB170C801*P0
ASB170C801*P0
106
10
0
0
50
100
150
–25 –15 –5
5
25
45
65 85 105 125
–20
0
20
40
60
80
Temperature(℃)
DC bias voltage(V)
Temperature(℃)
16 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
◦ASL series performance compare with ASB series
Fig-16 Temperature vs. Displacement
Fig-17 Temperature vs. Capacitance
60
50
40
30
20
10
0
2500
2000
1500
1000
500
ASB Type
ASB510C801***
ASL510C801***
ASL Type
0
-40
-20
0
20
40
60
80
100 120 140 160
-40
-20
0
20
40
60
80
100 120 140 160
Temperature(℃)
SAMPLE:5×5×20mm
Temperature(℃)
◦AHB series
Fig-18 Voltage vs. Displacement
100
90
Fig-19 Compression load vs. Displacement
100
90
80
70
60
50
40
30
20
10
0
AHB800C801
Voltage: 150VDC
80
70
60
AHB800C801
AHB700C801
AHB700C801
50
40
AHB550C801
30
20
10
AHB550C801
0
0
50
100
DC Voltage(V)
150
0
200
400
600
800
1000
Generated Force(N)
Fig-20 Heat generation vs. Drive frequency
90
80
70
60
50
40
30
20
Model: AHB800C801NP0LF
0~150Vp-p
0~100Vp-p
0~50Vp-p
Driving waveform: SIN wave 0~Vp-p
Temperature measurement: 10 minutes after the device is in operation
0
100
200
300
400
500
600
Driving frequency(Hz)
Multilayer Piezoelectric Actuators Vol.06 17
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Application Example
Positioning of stepper, Clamping actuator of wire bonding, Valve actuation of mass flow controller, Actuator of
shaker, Actuator of damping system, Positioning of light source.
Semiconductor manufacturing system
Precision machinery, Mechatronics
Home appliance, Audio equipment
Imaging equipment
Sewing machine, Robot, Vibration of parts feeder, Positioning of equipment, Pressure sensor
Actuator of pump, Speaker
Actuator of resolution improvement, Actuator of autofocusing, Actuator of damping
Pressure sensor, Positing of memory device(data storage or others)
Positioning of stage, Actuator of autofocusing, Actuator of shaker and damping system
Polarization control, Wavelength control
Computer, OA equipment
Optical equipment
Communications
Medical equipment
Micropump, Ultrasonic transducer
Measuring instrument
Automobile
Pressure sensor, Acceleration sensor, Fine positioning
Vibration control
18 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Reliability
Majority of failure mode of multilayer piezoelectric actuators is the short circuit due to degraded insulation.
Though the cause of degradation of insulation has not been clarified perfectly, it has been found that the
failure rate varies greatly between statistic uses(DC voltage application)and dynamic uses(pulse voltage
application). Like other electrical components, piezo actuators can be influenced by humidity as well as
applied voltage and ambient temperature. NEC TOKIN has added the metal sealed type piezo actuators
featuring high reliability by eliminating influence of the ambient atmosphere.
This section describes reliability guidelines for static and dynamic usages of the resin-coated and metal
sealed types actuators.
Reliability of our multilayer piezoelectric actuators is represented by MTTF(mean time to failure)in case of
static usage. Though the number of repetitions is considered to be used to represent the reliability in the
case of dynamic usage, the accurate relationship between the indicator and cause has not been determined
because of various influential causes and the mutual action between them. For the present, therefore, only
the obtained data and our concept are described.
(1)Resin-coated Type(AE Series)
a. DC voltage application
The acceleration factors have been obtained empirically for each of the drive voltage, ambient
temperature and relative humidity based on many experimental result. The MTTFr in actual
applications is estimated using equation(1)below with MTTFs observed under accelerated condition
as the reference value.
MTTF
r
=MTTF
s
×A
: Estimated value
: Reference value (=500h)
v
×A
h
×A
t
• • • (1)
MTTF
MTTF
r
s
3.2
150
A
A
A
v
h
t
: Acceleration factor for drive voltage=
V
r
: Actual voltage (V)
V
r
4.9
90
: Acceleration factor for relative humidity=
H
r
: Actual relative humidity (RH%)
H
r
40–Tr
10
: Acceleration factor for ambient temperature=1.5
Tr : Actual ambient temperature(℃)
[Example] The following calculation is made for the case of use at 25℃, 60% RH and 100 V:
3.2
4.9
40–25
10
150
100
90
60
MTTF
r
=500×
×
×1.5
=500×3.66×7.29×1.84
24,500h (2.8years)
b. Pulse voltage application
When this element is driven by a pulse voltage, temperature rises as a result of heating due to
dielectric loss of ceramics. Therefore, the element is not likely to be influenced by the humidity, thus
extending the service life greatly. Since this effect is affected by the element shape, pulse waveform
and frequency, it cannot be calculated by an equation as in the case of DC voltage application.
In NEC TOKINʼs testing on the AE0203D08, there was no failure confirmed after 0-150 V rectangular
pulse wave was applied with 500 Hz for 500 hours(equivalent to 900 million pulses were applied).
Please pay attention to the physical damage due to ringing phenomenon caused by the fixed method
of the element and the speed of the voltage rise.
Please refer to the separately printed literature, “ NEC TOKIN Multilayer Piezoelectric Actuators Userʼs
Manual” for more detail.
Multilayer Piezoelectric Actuators Vol.06 19
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
(2)Metal Sealed Type(ASB, ASL and AHB Series)
a. DC voltage application
MTTFr of the metal sealed type under the actual operating conditions is calculated/estimated from the
reference MTTFs and the acceleration factor as in the case of the resin-coated type. However since
the internal element is sealed from the atmosphere, it is not influenced by the atmospheric humidity.
Therefore, equation(2)below is used.
MTTF
r
=MTTF
s×A
v×A
t
• • • (2)
MTTF
MTTF
r
: Estimated value
s
: Reference value (=36,000h)
2
100
A
A
v
t
: Acceleration factor for drive voltage=
V
r
: Actual operating voltage (V)
V
r
85–T
10
r
:Acceleration factor for ambient temperature=1.5
T
r
: Actual operating temperature (℃)
[Example] The following calculation is made for use at 25(c and 150 V:
2
85–25
10
100
MTTF
r
=36,000×
×1.5
150
=36,000×0.44×11.3
179,000h (20.4years)
b. Pulse voltage application
Like the resin-coated type, it is extremely difficult to estimate reliability by using an equation in the
metal sealed type because of the influence of the pulse waveform, frequency, etc. in addition to the
voltage and ambient temperature.
In NEC TOKINʼs testing on the ASB170C801NP0, there was no failure confirmed up to 1000 hours
(equivalent to 100 million pulses were applied)under the conditions below.
[Conditions for evaluation]
Temperature: 85± 2℃
Humidity: 90 to 95% RH
Load: 200 N to 500 N(20 kgf to 50 kgf)
Drive voltage waveform: Rectangular wave, 30 Hz, 0 V to 100 V, duty ratio at 30%
20 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Guide to Use
Fixing Method:
⃝ Carefully prevent the piezo actuators from being bent, being twisted, or being applied tensile force.
Reference: Guide for tolerance of twisting and tension
Reference value
3×10-1N・m or less
50 N or less
Remarks
Twisting force
Tension
For an actuator which generates a force of 800 N
(compression resistance)
⃝
Install the actuator so that the center axis of generated displacement is aligned with the center axis of the load.
a. Resin-coated type
• Epoxy-based adhesives are recommended for bonding. Select adhesives that have high rigidity and
allow minimum thickness so that the generation force and displacement cannot be deteriorated. Also do
not form adhesives at the side of actuator.
• When thermosetting resin is used, perform polarizing treatment(see the caution section)again after the
adhesive is settled.
• The resin-coated type is weak to tensile force because of its structure and may be broken when tensile
force is applied onto the device. Using the device in the state that constantly applies compression is
effective against any mechanical damage. The pressure applied to this element should be kept at 20 to
50% of the force generated by this element(compression resistance).
• Install the element so that the axis of generated displacement is vertical to the mounting surface.
b. Metal sealed type
• Select the mounting bracket(female thread type or flange type)according to the mounting method, and
install the element utilizing the bracket.
• Fix the element securely so that the generated force and displacement cannot be deteriorated.
• Connect the driven item at the displacement generating end after securing the mounting portion so that
it avoids unnecessary stress applied at the time of installation.
• Though this product is designed to apply a compressive force to the internal element by the metal case, avoid
any usages that cause bending, twisting, or tension force when the device is in use
Example of Actuator mounting:
Moving part or load
Moving part or load
Spherical surface
Hinge
Only one side is touching the actuator.
(Stress is concentrated on one edge
and generates share mode stress)
Piezo Actuator
Piezo Actuator
Piezo Actuator
The actuator may break.
a) Example of wrong mounting
b) Example of correct mounting
Imperfect alignment between actuator and load
<Actuator will be broken>
Mount the device so that the load is uniformly
applied by the spherical surface or the hinge
Driving Method:
⃝
Connect the red lead wire to the positive(+)terminal of the power supply. Also prevent reverse voltage application.
⃝ Basically the voltage controls the aimed displacement and generated force. In driving, however, it is also necessary
to take ringing due to the resonance or hysteresis of the element itself into consideration. In pulse driving, it is further
necessary to pay sufficient attention to heat generation due to dielectric loss, charge/discharge current due to the
capacitive component and the power output impedance as well. Please refer to the separately printed
literature, “NEC TOKIN Multilayer Piezoelectric Actuators Userʼs Manual”
Multilayer Piezoelectric Actuators Vol.06 21
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Generated force and load relation:
Static load: No load value change when actuator moves.
20
400N static load is applied
15
10
5
M
M
0
-5
400N
Model: AE0505D16
-10
0
50
100
Voltage(V)
150
Piezo Actuator
20
15
Total displacement is not changed.
10
5
Zero point shift.
150V
0
-5
-10
-15
-20
Static load: Initial position (0V position) is dropped
by spring constant but total displacement has the
same value under static load.
0V
0
200
400
600
800
1000
Load(N)
Fluctuating load: Load value changes by spring reaction when actuator moves.
20
18
16
14
12
10
8
Spring load of
14.3N/μm
Reduction of displacement
6
4
Model: AE0505D16
2
0
0
50
100
Voltage(V)
Reduction of displacement
150
20
18
16
14
12
10
8
Piezo Actuator
Spring load of 14.3N/μm
Load-Displacement
line of actuator
6
4
Displacement loss
2
0
0
200
400
600
800
1000
Load(N)
Spring load (Fluctuating load): Displacement
is changed by relation between generated
force and spring constant of actuator.
22 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Precautions
⃝ Connect the red lead wire to the positive(+)terminal of the power supply.
⃝ Carefully avoid electric shock since a high voltage is in use.
⃝ Never apply excessive tension to a lead wire. Do not handle the product by picking up or moving the lead wire.
⃝ Do not disassemble the case of the metal sealed type.
⃝ Machining of the actuator element and replacement of the lead wire are prohibited.
⃝ Do not handle the resin-coated type(AE series)with bare hands. Otherwise, the reliability of the element
would be degraded.
⃝ Do not wash resin-coated type(AE series)by organic solvant.
⃝Avoid excessive physical shock resulting from, for example, dropping. Otherwise, the internal piezoelectric ceramic
element may be damaged.
⃝ If the actuator is exposed to high temperature above 100℃ or if it is used after long storage period(more
than three months), it should be polarized by using the circuit configuration and conditions shown below.
R1
S
V
R2
PA
Protective resistor R1=1kΩ
Protective resistor R2=1kΩ
Polarizing conditions: DC voltage application
0V→150±0.2V (to be retained for 10 seconds) →0
⃝ Do not apply voltage exceeding maximum rating voltage, or do not do rapid charging and discharging.
These might lead to degradation of the reliability or mechanical fracture.
⃝ Do not use the actuator in high concentration of highly inflammable gas. Otherwise, ignition may occur.
⃝ Use the actuator so as not to cause bending, twisting or tension. Furthermore, align the center axis of displacement
of the actuator with the center axis of the mechanical load.
⃝ Drive the actuator so that the rising speed is more than three times as much as the resonance period in
order to prevent the device from damaging by ringing.
⃝ Store the resin-coated type(AE series)preferably in a dry atmosphere(desirably below 40% RH)at ordinary
temperatures(-5 to +40˚C). Avoid condensation on the product surface.
⃝ Store actuators where there is no vibration.
⃝These products must be handled properly as industrial waste. When disposing, please contact your local waste
disposal service.
⃝ Piezo actuator is industrial wastes, make sure disposal method under the laws.
Multilayer Piezoelectric Actuators Vol.06 23
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
24 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
Multilayer Piezoelectric Actuators Vol.06 25
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
26 Multilayer Piezoelectric Actuators Vol.06
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
When using our products, the following precautions should
be taken.
(1) Safety designing of an apparatus or a system allowing for failures of electronic components used
in the system
In general, failures will occur in electronic components at a certain probability. NEC TOKIN makes
every effort to improve the quality and reliability of electronic component products. However, it is
impossible to completely eliminate the probability of failures. Therefore, when using NEC TOKIN’
s electronic component products, systems should be carefully designed to ensure redundancy in
the event of an accident which would result in injury or death, fire, or social damage, to ensure
the prevention of the spread of fire, and the prevention of faulty operation. (Please refer to pre-
cautions to be taken when using multilayer piezoelectric actuators for the details of failures.)
(2) Quality level of various kinds of parts, and equipment in which the parts can be utilized
Electronic components have a standard quality level unless otherwise specified.
NEC TOKIN classifies the level of quality of electronic component products into three levels, in
order from a lower level, a standard quality level, a special quality level, and a custom quality level
in which a customer individually specifies a quality assurance program. Each of the quality levels
has recommended applications.
If a user wants to use the electronic parts having a standard quality level in applications other
than the applications specified for the standard quality level, they should always consult a member
of our company’s sales staff before using the electronic parts.
Standard quality level
: Computers, office automation equipment, communications equipment,
measuring instruments, AV equipment, household electrical appliances,
machine tools, personal equipment, industrial robots
Special quality level
: Transportation equipment(automobiles, railways, shipping, or the
like), traffic signals, disaster prevention/crime prevention systems, a
variety of safety devices, and medical equipment which is not directly
intended for life-support purposes
Custom quality level
: Equipment for airplanes, aerospace equipment, nuclear power control
systems, and medical equipment, apparatus or system for life-support
purposes
Unless otherwise shown, the quality level of NEC TOKIN’s electronic component products included in
documents such as catalogues, data sheets or data books is the standard quality level.
(3) This manual is subject to change without notice.
The contents of this manual are based on data which is correct as of June 2011, and they may be
changed without notice. If our products are used for mass-production design, please cousult with
a member of our company’s sales staff by way of precaution.
(4) Reprinting and copying of this manual without prior written permission from NEC TOKIN
Corporation are not permitted.
(5) Industrial property problems
In the event any problems associated with industrial property of a third party arising as a result of
the use of our products, NEC TOKIN assumes no responsibility for problems other than problems
directly associated with the constitution and manufacturing method of the products.
(6) Should any of these products come under the category of strategic goods or services(according
to Japan’s foreign trade and foreign exchange regulations), the sender must obtain an export
license from the Japanese Government before said products can be exported outside Japan.
●All specifications in this catalog and production status of products are subject to change without notice. Prior to the purchase, please contact NEC TOKIN for updated product data.
●Please request for a specification sheet for detailed product data prior to the purchase.
●Before using the product in this catalog, please read "Precautions" and other safety precautions listed in the printed version catalog.
2011.06.22 9307MPAVOL06E1106H2
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明