NX5504EH-A [NEC]

Laser Diode Emitter, 1480nm Min, 1580nm Max, Through Hole Mount, CAN PACKAGE-4;


型号：	NX5504EH-A
厂家：	NEC
描述：	Laser Diode Emitter, 1480nm Min, 1580nm Max, Through Hole Mount, CAN PACKAGE-4
文件：	总8页 (文件大小：97K)
中文：	中文翻译
下载：	下载PDF数据表文档文件

PRELIMINARY DATA SHEET

LASER DIODE

NX5504 Series

1 550 nm FOR FTTH

InGaAsP MQW-FP LASER DIODE

DESCRIPTION

The NX5504 Series is a 1 550 nm Multiple Quantum Well (MQW)

structured Fabry-Perot (FP) laser diodes with InGaAs monitor PIN-PD. These

devices are designed and ideal for Fiber To The Home (FTTH).

APPLICATION

•

FTTH (Fiber To The Home)

FEATURES

•

Optical output power

Low threshold current

Differential efficiency

Po = 5.0 mW

l^th= 8 mA

ηd = 0.3 W/A

Wide operating temperature range T^C= −40 to +85°C

InGaAs monitor PIN-PD

CAN package

φ 5.6 mm

Fiber coupling point

5.8 mm

The information in this document is subject to change without notice. Before using this document, please confirm that

this is the latest version.

Not all devices/types available in every country. Please check with local NEC Compound Semiconductor Devices

representative for availability and additional information.

Document No. PL10435EJ03V0DS (3rd edition)

Date Published May 2004 CP(K)

Printed in Japan

The mark shows major revised points.



NEC Compound Semiconductor Devices 2003, 2004

NX5504 Series

PACKAGE DIMENSIONS (UNIT: mm)

5.6^+0.00

4.2 0.1

–0.03

3.55 0.1

1.0 0.1

BOTTOM VIEW

+0.1

–0.0

0.3

Fiber Coupling Point^*1

2.0

PIN CONNECTIONS

NX5504EH

NX5504EK

1 (Case)

Reference

Plane

4– 0.45

2.0

*1 Recommendation of Fiber Coupling Conditions

Fiber : SMF with 8 degree angle-polished ferrule

Fiber coupling distance : 5.80 0.05 mm from reference plane.

Fiber coupling alignment : optimixed x, y, x, y ≤ 300 m).

(

∆

Preliminary Data Sheet PL10435EJ03V0DS

NX5504 Series

ORDERING INFORMATION

Part Number

Package

4-pin CAN with ball lens cap

Pin Connections

NX5504EH

NX5504EK

Remarks 1. The color of ball lens cap might be observed differently from our can package products.

2. The hermetic test will be performed as AQL 1.0%.

Preliminary Data Sheet PL10435EJ03V0DS

NX5504 Series

ABSOLUTE MAXIMUM RATINGS

Parameter

Optical Output Power

Symbol

Ratings

Unit

Forward Current of LD

150

Reverse Voltage of LD

2.0

Forward Current of PD

Reverse Voltage of PD

Operating Case Temperature

Storage Temperature

−40 to +85

150 (15 Hr)

350 (3 sec.)

°C

Tstg

Tasb

Tsld

Assembly Temperature

Lead Soldering Temperature

Relative Humidity (noncondensing)

Preliminary Data Sheet PL10435EJ03V0DS

NX5504 Series

ELECTRO-OPTICAL CHARACTERISTICS (TC = 25°C, unless otherwise specified)

Parameter

Operating Voltage

Symbol

Vop

Conditions

MIN.

TYP.

1.1

MAX.

1.5

Unit

Po = 5.0 mW, TC = −40 to +85°C

Threshold Current

Ith

TC = 85°C

Threshold Output Power

Differential Efficiency

Pth

ηd

TC = −40 to +85°C, IF = Ith

100

0.3

−1.5

200

µW

W/A

0.15

ηd (@ 85°C)

∆ηd = 10 log

Temperature Dependence of

Differential Efficiency

∆ηd

−3.0

ηd (@ 25°C)

Center Wavelength

λ^C

∆λ/∆T

P^o= 5.0 mW, RMS (−20 dB)

T^C= −40 to +85°C

1 480

1 580

nm/°C

Temperature Dependence of Center

Wavelength

TC = −40 to +85°C

0.5

1.5

Spectral Width

Po = 5.0 mW, RMS (−20 dB)

T^C= −40 to +85°C

3.0

Rise Time

10-90%

0.7

Fall Time

90-10%

Monitor Current

Monitor Dark Current

VR = 5 V, Po = 5.0 mW

VR = 5 V

200

µA

0.1

500

VR = 5 V, TC = −40 to +85°C

VR = 5 V, f = 1 MHz

Monitor PD Terminal Capacitance

Tracking Error^*1

Im = const. (@ Po = 5.0 mW, TC = 25°C)

T^C= −40 to +85°C

−1.0

1.0

*1 Tracking Error: γ

5.0

γ = 10 log

[dB]

(mW)

= 25˚C

5.0

TC = –40 to +85˚C

(mA)

Preliminary Data Sheet PL10435EJ03V0DS

NX5504 Series

REFERENCE

Document Name

Document No.

PL10161E

OPTICAL SEMICONDUCTOR DEVICES FOR FIBEROPTIC COMMUNICATIONS SELECTION GUIDE

Opto-Electronics Devices Pamphlet

PX10160E

Preliminary Data Sheet PL10435EJ03V0DS

NX5504 Series

•

The information in this document is current as of May, 2004. The information is subject to change

without notice. For actual design-in, refer to the latest publications of NEC's data sheets or data

books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products

and/or types are available in every country. Please check with an NEC sales representative for

availability and additional information.

•

No part of this document may be copied or reproduced in any form or by any means without prior

written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document.

NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of

third parties by or arising from the use of NEC semiconductor products listed in this document or any other

liability arising from the use of such products. No license, express, implied or otherwise, is granted under any

patents, copyrights or other intellectual property rights of NEC or others.

•

Descriptions of circuits, software and other related information in this document are provided for illustrative

purposes in semiconductor product operation and application examples. The incorporation of these

circuits, software and information in the design of customer's equipment shall be done under the full

responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third

parties arising from the use of these circuits, software and information.

While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers

agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize

risks of damage to property or injury (including death) to persons arising from defects in NEC

semiconductor products, customers must incorporate sufficient safety measures in their design, such as

redundancy, fire-containment, and anti-failure features.

NEC semiconductor products are classified into the following three quality grades:

"Standard", "Special" and "Specific". The "Specific" quality grade applies only to semiconductor products

developed based on a customer-designated "quality assurance program" for a specific application. The

recommended applications of a semiconductor product depend on its quality grade, as indicated below.

Customers must check the quality grade of each semiconductor product before using it in a particular

application.

"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio

and visual equipment, home electronic appliances, machine tools, personal electronic equipment

and industrial robots

"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster

systems, anti-crime systems, safety equipment and medical equipment (not specifically designed

for life support)

"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life

support systems and medical equipment for life support, etc.

The quality grade of NEC semiconductor products is "Standard" unless otherwise expressly specified in NEC's

data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not

intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness

to support a given application.

(Note)

(1) "NEC" as used in this statement means NEC Corporation, NEC Compound Semiconductor Devices, Ltd.

and also includes its majority-owned subsidiaries.

(2) "NEC semiconductor products" means any semiconductor product developed or manufactured by or for

NEC (as defined above).

M8E 00. 4-0110

Preliminary Data Sheet PL10435EJ03V0DS

NX5504 Series

SAFETY INFORMATION ON THIS PRODUCT

SEMICONDUCTOR LASER

DANGER

INVISIBLE LASER RADIATION

AVOID DIRECT EXPOSURE TO BEAM

AVOID EXPOSURE-Invisible

OUTPUT POWER

WAVELENGTH

mW MAX

Laser Radiation is emitted from

this aperture

CLASS lllb LASER PRODUCT

A laser beam is emitted from this diode during operation.

The laser beam, visible or invisible, directly or indirectly, may cause injury to the eye or loss of

eyesight.

Warning Laser Beam

Caution GaAs Products

• Do not look directly into the laser beam.

• Avoid exposure to the laser beam, any reflected or collimated beam.

This product uses gallium arsenide (GaAs).

GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe

the following points.

• Follow related laws and ordinances when disposing of the product. If there are no applicable laws

and/or ordinances, dispose of the product as recommended below.

1. Commission a disposal company able to (with a license to) collect, transport and dispose of

materials that contain arsenic and other such industrial waste materials.

2. Exclude the product from general industrial waste and household garbage, and ensure that the

product is controlled (as industrial waste subject to special control) up until final disposal.

• Do not burn, destroy, cut, crush, or chemically dissolve the product.

• Do not lick the product or in any way allow it to enter the mouth.

For further information, please contact

NEC Compound Semiconductor Devices, Ltd.

http://www.ncsd.necel.com/

E-mail: salesinfo@ml.ncsd.necel.com (sales and general)

techinfo@ml.ncsd.necel.com (technical)

5th Sales Group, Sales Division TEL: +81-44-435-1588 FAX: +81-44-435-1579

NEC Compound Semiconductor Devices Hong Kong Limited

E-mail: ncsd-hk@elhk.nec.com.hk (sales, technical and general)

TEL: +852-3107-7303

TEL: +886-2-8712-0478 FAX: +886-2-2545-3859

TEL: +82-2-558-2120

FAX: +82-2-558-5209

FAX: +852-3107-7309

Hong Kong Head Office

Taipei Branch Office

Korea Branch Office

NEC Electronics (Europe) GmbH

http://www.ee.nec.de/

TEL: +49-211-6503-0 FAX: +49-211-6503-1327

California Eastern Laboratories, Inc.

TEL: +1-408-988-3500 FAX: +1-408-988-0279

http://www.cel.com/

0401

NX5504EH-A [NEC]

相关型号：

SI9130DB

SI9135LG-T1

SI9135LG-T1-E3

SI9135_11

SI9136_11

SI9130CG-T1-E3

SI9130LG-T1-E3

SI9130_11

SI9137

SI9137DB

SI9137LG

SI9122E