PS9303L-V-AX [NEC]
暂无描述;型号: | PS9303L-V-AX |
厂家: | NEC |
描述: | 暂无描述 |
文件: | 总10页 (文件大小:116K) |
中文: | 中文翻译 | 下载: | 下载PDF数据表文档文件 |
DATA SHEET
PHOTOCOUPLER
PS9303L,PS9303L2
HIGH CMR, 1 Mbps TOTEM POLE OUTPUT TYPE
6-PIN SDIP PHOTOCOUPLER
−NEPOC Series−
DESCRIPTION
The PS9303L and PS9303L2 are optical coupled high-speed, totem pole output isolators containing a GaAlAs LED
on the input side and a photodiode and a signal processing circuit on the output side on one chip.
The PS9303L and PS9303L2 are specified high CMR and pulse width distortion with operating temperature. It is
suitable for IPM drive.
The PS9303L is lead bending type (Gull-wing) for surface mounting.
The PS9303L2 is lead bending type for long creepage distance (Gull-wing) for surface mount.
FEATURES
PIN CONNECTION
•
•
•
•
•
•
•
•
High common mode transient immunity (CMH, CML = 15 kV/μs MIN.)
Half size of 8-pin DIP
(Top View)
6
5
4
Pulse width distortion (⏐tPLH − tPHL⏐ = 550 ns MAX.)
High-speed (1 Mbps)
1. Anode
2. NC
3. Cathode
4. GND
High isolation voltage (BV = 5 000 Vr.m.s.)
Totem pole output (Active High Output Type)
Pb-Free product
5. V
O
6. VCC
Safety standards
<R>
•
•
•
UL approved: File No. E72422
CSA approved: No. CA 101391
1
2
3
DIN EN60747-5-2 (VDE0884 Part2) approved: No. 40024069 (Option)
APPLICATIONS
TRUTH TABLE
•
•
IPM Driver
LED
ON
Output
General purpose inverter
H
L
OFF
The information in this document is subject to change without notice. Before using this document, please
confirm that this is the latest version.
Not all products and/or types are available in every country. Please check with an NEC Electronics
sales representative for availability and additional information.
Document No. PN10694EJ02V0DS (2nd edition)
Date Published August 2008 NS
Printed in Japan
2007, 2008
The mark <R> shows major revised points.
The revised points can be easily searched by copying an "<R>" in the PDF file and specifying it in the "Find what:" field.
PS9303L,PS9303L2
PACKAGE DIMENSIONS (UNIT: mm)
Lead Bending Type (Gull-wing) For Surface Mount
PS9303L
4.58 0.25
(0.82)
9.7 0.3
7.62
021.5
1.27
0.25 M
0.8 0.25
0.4 0.1
Lead Bending Type (Gull-wing) For Long Creepage Distance (Surface Mount)
PS9303L2
4.58 0.25
(0.82)
11.5 0.3
7.62
021.5
1.27
0.25 M
0.75 0.25
0.4 0.1
2
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
<R>
MARKING EXAMPLE
Type Number
9303
N831
Assembly Lot
*1
No. 1 pin Mark
N
8
31
Week Assembled
Year Assembled
(Last 1 Digit)
Rank Code
*1 Bar : Pb-Free
PHOTOCOUPLER CONSTRUCTION
Parameter
Air Distance (MIN.)
PS9303L
PS9303L2
8 mm
7 mm
7 mm
Outer Creepage Distance (MIN.)
Isolation Distance (MIN.)
8 mm
0.4 mm
0.4 mm
<R>
ORDERING INFORMATION
Part Number
Order Number
Solder Plating
Specification
Packing Style
Safety Standard
Approval
Application Part
Number*1
PS9303L
PS9303L-AX
Pb-Free
20 pcs (Tape 20 pcs cut)
Standard products
PS9303L
PS9303L2
PS9303L
PS9303L2
PS9303L-E3
PS9303L2
PS9303L-E3-AX
PS9303L2-AX
(Ni/Pd/Au)
Embossed Tape 2 000 pcs/reel (UL, CSA approved)
20 pcs (Tape 20 pcs cut)
PS9303L2-E3
PS9303L-V
PS9303L-E3-V
PS9303L2-V
PS9303L2-E3-AX
PS9303L-V-AX
PS9303L-E3-V-AX
PS9303L2-V-AX
Embossed Tape 2 000 pcs/reel
20 pcs (Tape 20 pcs cut)
DIN EN60747-5-2
Embossed Tape 2 000 pcs/reel (VDE0884 Part2)
20 pcs (Tape 20 pcs cut)
Approved (Option)
PS9303L2-E3-V PS9303L2-E3-V-AX
Embossed Tape 2 000 pcs/reel
*1 For the application of the Safety Standard, following part number should be used.
3
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
ABSOLUTE MAXIMUM RATINGS (TA = 25°C, unless otherwise specified)
Parameter
Symbol
IF
Ratings
20
Unit
mA
V
Diode
Forward Current*1
Reverse Voltage
VR
5
Detector Supply Voltage
Output Voltage
VCC
VO
−0.5 to +25
−0.5 to +25
25
V
V
Output Current
IO
mA
mW
Vr.m.s.
°C
Power Dissipation*2
Isolation Voltage*3
PC
100
BV
TA
5 000
Operating Ambient Temperature
Storage Temperature
−40 to +100
−55 to +125
Tstg
°C
*1 Reduced to 0.33 mA/°C at TA = 70°C or more.
*2 Reduced to 1.9 mW/°C at TA = 70°C or more.
*3 AC voltage for 1 minute at TA = 25°C, RH = 60% between input and output.
Pins 1-3 shorted together, 4-6 shorted together.
RECOMMENDED OPERATING CONDITIONS
Parameter
Symbol
IF
MIN.
6
TYP.
15
MAX.
10
Unit
mA
V
Input Current
Input Voltage
VF
0
0.8
20
Supply Voltage
Output Voltage
VCC
VO
4.5
0
V
20
V
4
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
ELECTRICAL CHARACTERISTICS (TA = −40 to +100°C, VCC = 15 V, unless otherwise specified)
Parameter
Symbol
VF
Conditions
IF = 10 mA, TA = 25°C
MIN.
1.3
TYP.*1
1.55
MAX.
1.8
Unit
V
Diode
Forward Voltage
Reverse Current
Terminal Capacitance
IR
VR = 3 V, TA = 25°C
200
μA
pF
V
Ct
V = 0 V, f = 1 MHz, TA = 25°C
VCC = 5 V, IO = −3.5 mA, IF = 10 mA
VCC = 20 V, IO = −3.5 mA, IF = 10 mA
IO = 3.5 mA, VF = 0.8 V
30
3.5
18.1
0.1
2
Detector High Level Output Voltage
VOH
2.4
17.4
Low Level Output Voltage
High Level Supply Current
VOL
ICCH
0.35
V
VCC = 5 V, IF = 10 mA
4
4
5
5
mA
VCC = 20 V, IF = 10 mA
2
Low Level Supply Current
ICCL
VCC = 5 V, VF = 0 V
3
mA
VCC = 20 V, VF = 0 V
3
High Level Output Short
Circuit Current
IOSH
IOSL
VCC = 20 V, VO = GND, IF = 10 mA
−7
−40
mA
mA
Low Level Output Short
Circuit Current
VCC = VO = 20 V, VF = 0 V
7
40
2
Coupled Threshold Input Current
Isolation Resistance
IFLH
RI-O
CI-O
tPHL
VCC = 5 V, VO > 2.4 V, IO = −3.5 mA
VI-O = 500 VDC, RH = 60%, TA = 25°C
V = 0 V, f = 1 MHz, TA = 25°C
5
mA
Ω
1012
Isolation Capacitance
0.6
pF
ns
Propagation Delay Time
VCC = 20 V, CL = 100 pF,
250
600
600
550
(H → L)
IF = 10 → 0 mA, VTHHL = 1.3 V
Propagation Delay Time
tPLH
VCC = 20 V, CL = 100 pF,
350
ns
ns
(L → H)
IF = 0 → 10 mA, VTHLH = 1.3 V
Pulse Width Distortion
(PWD)
⏐tPLH-tPHL⏐ VCC = 20 V, CL = 100 pF,
IF = 10 ↔ 0 mA
Rise Time (10-90%)
tr
VCC = 20 V, CL = 100 pF,
175
95
ns
IF = 0 → 10 mA
Fall Time (90-10%)
tf
VCC = 20 V, CL = 100 pF,
ns
IF = 10 → 0 mA
Common Mode
CMH
VCC = 5 V, TA = 25°C, IF = 10 mA,
⏐VCM⏐ = 1.0 kV, VO (MIN.) = 2.4 V
15
15
kV/μs
Transient Immunity at High
Level Output
Common Mode
CML
VCC = 5 V, TA = 25°C, IF = 0 mA,
⏐VCM⏐ = 1.0 kV, VO (MAX.) = 0.35 V
kV/μs
Transient Immunity at Low
Level Output
*1 Typical values at TA = 25°C
5
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
TEST CIRCUIT
Fig. 1 tPLH, tPHL, t
r
, tf
Test Circuit and Wave Forms
Pulse input (I
F
)
IF (ON)
(PW = 1 s,
Duty cycle = 1/10)
μ
Input
50%
V
CC = 20 V
0.1
μF
IF
V
O
(monitor)
t
PLH
t
PHL
Input
(monitor)
V
OH
Output
90%
10%
CL
= 100 pF
47 Ω
1.3 V
VO
V
OL
t
r
t
f
CL includes probe and stray wiring capacitance.
Fig. 2 CM
H
, CM Test Circuit and Wave Forms
L
IF
1 kV
VCM
V
CC = 5 V
90%
10%
SW
0.1μF
V
O
(monitor)
tr
tf
V
O
V
2.4 V
OH
VCM
(IF
= 10 mA)
= 0 mA)
0.35 V
V
O
V
OL
(IF
CL includes probe and stray wiring capacitance.
6
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
USAGE CAUTIONS
1. This product is weak for static electricity by designed with high-speed integrated circuit so protect against static
electricity when handling.
2. By-pass capacitor of 0.1 μF is used between VCC and GND near device. Also, ensure that the distance between
the leads of the photocoupler and capacitor is no more than 10 mm.
3. Avoid storage at a high temperature and high humidity.
NOTES ON HANDLING
Cautions regarding noise
Be aware that when voltage is applied suddenly between the photocoupler’s input and output or between
collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute
maximum ratings.
7
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
<R>
SPECIFICATION OF VDE MARKS LICENSE DOCUMENT
Parameter
Symbol
Speck
Unit
Application classification (DIN EN 60664-1 VDE0110 Part 1)
for rated line voltages ≤ 300 Vr.m.s.
for rated line voltages ≤ 600 Vr.m.s.
IV
III
Climatic test class (DIN EN 60664-1 VDE0110)
40/100/21
Dielectric strength
maximum operating isolation voltage
Test voltage (partial discharge test, procedure a for type test and random test)
Upr = 1.5 × UIORM, Pd < 5 pC
UIORM
1 130
1 695
Vpeak
Upr
Vpeak
Test voltage (partial discharge test, procedure b for all devices)
Upr
2 119
Vpeak
Vpeak
Upr = 1.875 × UIORM, Pd < 5 pC
Highest permissible overvoltage
UTR
8 000
2
Degree of pollution (DIN EN 60664-1 VDE0110 Part 1)
Clearance distance
PS9303L
PS9303L2
PS9303L
PS9303L2
>7.0
mm
mm
>8.0
Creepage distance
>7.0
>8.0
Comparative tracking index (DIN IEC 112/VDE 0303 Part 1)
Material group (DIN EN 60664-1 VDE0110 Part 1)
Storage temperature range
CTI
175
III a
Tstg
TA
–55 to +125
–40 to +100
°C
°C
Operating temperature range
Isolation resistance, minimum value
VIO = 500 V dc at TA = 25°C
Ris MIN.
Ris MIN.
1012
1011
Ω
Ω
VIO = 500 V dc at TA MAX. at least 100°C
Safety maximum ratings (maximum permissible in case of fault, see thermal
derating curve)
Package temperature
Tsi
Isi
175
400
700
°C
mA
mW
Current (input current IF, Psi = 0)
Power (output or total power dissipation)
Isolation resistance
Psi
VIO = 500 V dc at TA = Tsi
Ris MIN.
109
Ω
8
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
•
The information in this document is current as of August, 2008. The information is subject to
change without notice. For actual design-in, refer to the latest publications of NEC Electronics data
sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not
all products and/or types are available in every country. Please check with an NEC Electronics sales
representative for availability and additional information.
• No part of this document may be copied or reproduced in any form or by any means without the prior
written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may
appear in this document.
•
NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual
property rights of third parties by or arising from the use of NEC Electronics products listed in this document
or any other liability arising from the use of such products. No license, express, implied or otherwise, is
granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others.
Descriptions of circuits, software and other related information in this document are provided for illustrative
purposes in semiconductor product operation and application examples. The incorporation of these
circuits, software and information in the design of a customer's equipment shall be done under the full
responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by
customers or third parties arising from the use of these circuits, software and information.
•
• While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products,
customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To
minimize risks of damage to property or injury (including death) to persons arising from defects in NEC
Electronics products, customers must incorporate sufficient safety measures in their design, such as
redundancy, fire-containment and anti-failure features.
• NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and
"Specific".
The "Specific" quality grade applies only to NEC Electronics products developed based on a customer-
designated "quality assurance program" for a specific application. The recommended applications of an NEC
Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of
each NEC Electronics product before using it in a particular application.
"Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio
and visual equipment, home electronic appliances, machine tools, personal electronic equipment
and industrial robots.
"Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster
systems, anti-crime systems, safety equipment and medical equipment (not specifically designed
for life support).
"Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life
support systems and medical equipment for life support, etc.
The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC
Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications
not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to
determine NEC Electronics' willingness to support a given application.
(Note)
(1)
"NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its
majority-owned subsidiaries.
(2)
"NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as
defined above).
M8E 02. 11-1
9
Data Sheet PN10694EJ02V0DS
PS9303L,PS9303L2
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe
the following points.
Caution GaAs Products
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
• Do not lick the product or in any way allow it to enter the mouth.
相关型号:
SI9130DB
5- and 3.3-V Step-Down Synchronous ConvertersWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135LG-T1-E3
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9135_11
SMBus Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9136_11
Multi-Output Power-Supply ControllerWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130CG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130LG-T1-E3
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9130_11
Pin-Programmable Dual Controller - Portable PCsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137DB
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9137LG
Multi-Output, Sequence Selectable Power-Supply Controller for Mobile ApplicationsWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
SI9122E
500-kHz Half-Bridge DC/DC Controller with Integrated Secondary Synchronous Rectification DriversWarning: Undefined variable $rtag in /www/wwwroot/website_ic37/www.icpdf.com/pdf/pdf/index.php on line 217
-
VISHAY
©2020 ICPDF网 联系我们和版权申明